Professional Plumbing
brands you trust.
The Barnes BOSS series is designed to provide pump control and alarm notification of potentially threatening water and oil levels in simplex pumping applications.
E
TH
OIL SENSOR SWITCH
The BOSS features an innovative switch that senses the difference between oil and water to remove water from the tank, while preventing oil from being pumped into the environment. The Oil Sensor Switch features four probes (start level, stop level, high water level, reference for ground) and a mechanical high oil alarm float (see description of operation on reverse side). If water/oil levels reach past the high water probe or mechanical high oil float the BOSS will activate an alarm, but the water/oil will need to be manually pumped out by an operator.
24
month
TY WARRAN
The BOSS PLUS removes water and other fluids automatically from elevator pits without any human intervention while preventing oil from being pumped into the environment. BOSS PLUS ASME A17.1 compliant as required by some states (AZ, TX, VT, WI, NV, CO) Features: • NEMA 1 rated enclosure model for indoor use protection • NEMA 4X rated enclosure model for indoor or outdoor use protection • LED indicators for: ○○ High water (red) ○○ High oil (red) ○○ Pump run (green) ○○ Power on (green) • Auxiliary contacts for remote alarms (high water and high oil), auto dialer or building automation system • ** Factory-installed Oil Sensor Switch: ○○ Pump activation probes (start and stop levels) 5 inch pumping range ○○ High water alarm probe ○○ Reference probe (ground) ○○ High oil alarm float (mechanical) • ** Receptacle to accept 120V, 15A pump plug • ** Factory-installed 120V, 15A power cord (10 ft.) • ** Plug-n-play - no wiring for easy installation NOTE ** = NOT on NEMA 4X, 3 Phase or Plus units)
Barnes BOSS
Applications:
Barnes BOSS PLUS C US 745806
• • • •
elevator sump basins transformer vaults leachate well applications garages
BARNES OIL SWITCH SENSOR BROCHURE
The Barnes Oil Sensor Switch Series Normal Operation
BOSS PLUS panels include: - Water/Oil drain switch (functions in hand mode only)
- Auto/Hand switch
(spring loaded to auto)
- Control fuse
High Water Alarm E
TH
OIL SENSOR SWITCH
HIGH WATER ALARM SIGNALING TYPE E
As water and oil enter the tank, the oil rises to create a floating layer on top of the water. The water level rises to reach the start probe, activating the pump to remove water from the tank. It continues pumping water out of the tank until the water level falls below the stop probe, deactivating the pump.
Panel with LED indicators for: - High water indicator - High oil indicator - Pump run indicator - Power indicator
TEST
LISTED 288X
LR54245
ALARM
POWER ON Piqua, Ohio
SILENCE
HIGH WATER HIGH OIL PUMP RUN POWER
WARNING: ELECTRICAL SHOCK HAZARD
Failure to disconnect all power before servicing could result in injury or death.
INDOOR ALARM SYSTEM 120VAC Note: Replace battery every 12 months
AUTO/HAND
High Water Alarm
(the BOSS Series tank alert® alarm is
Factory-installed 10ft. power cord
activated. In The BOSS PLUS Series the pump energizes along with the valves to oil into the appropriate holding vessel).
High Oil Alarm If the oil level rises to activate the mechanical high oil float, the red high oil LED indicator illuminates and auxiliary contacts close (the BOSS
WATER/OIL DRAIN
Receptacle to plug in pump power cord
If the water level continues to rise and reaches the high water probe, the red high water LED indicator illuminates and auxiliary contacts close
automatically remove contaminated water/
FUSE 1 AMP AGC 250 VOLT
Factory-installed Oil water switch includes: - High water probe - Start probe - High oil float - Stop probe - Reference probe
Oil Water
Series tank alert® alarm is activated. In The BOSS PLUS Series the pump energizes
along
with
the
valves
Works well with SP33, SP50, SU25, and SU33 sump pumps.
to
automatically remove contaminated water/ oil into the appropriate holding vessel).
A Crane Co. Company
Crane Pumps & Systems 420 Third Street Piqua, Ohio 45356 (937) 778-8947 Fax (937) 773-7157 www.cranepumps.com
Crane Pumps & Systems Canada 83 West Drive Brampton, Ont. Canada L6T 2J6 (905) 457-6223 Fax (905) 457-2650
brands you trust.
2015 Crane Pumps & Systems, Inc. A Crane Co. Company Printed in U.S.A. BPPBOSS - Rev. B (4/15)