Okin 110 Volt Electric Motor (Beta Drive)
Okin 110 Volt Electric Motor (Beta Drive)
END OF ELECTRICAL CORD OF MOTOR PLUGS INTO END OF THE TRANSFORMER
POWER TRANSFORMER WITH END SHOWN THAT PLUGS INTO THE CORD ON OKIN MOTOR
ALWAYS BE SURE THE TWO ENDS ARE WELL CONNECTED OR MOTOR WILL NOT OPERATE. UPON A POWER FAILURE ONE OF THE FIRST THINGS TO CHECK ARE THE CONNECTED WIRES.
Electrical Wiring Cable That Connects Power Transformer to Wall Outlet (Note Yellow Electrical Warning Label)
Transformer End
Connect Transformer to Wire Cable. Again check it is secure.
Completely Connected Assembly of Motor to Power Transformer to Wire Cable for Plugging Into Wall Outlet.
Split Push Button Release With Wire
Note the Openings in this Connector Cap. Take care not to bend the prongs this end caps onto during installation of the release button.
END OF ELECTRICAL CORD OF MOTOR PLUGS INTO END OF THE TRANSFORMER
POWER TRANSFORMER WITH END SHOWN THAT PLUGS INTO THE CORD ON OKIN MOTOR
ALWAYS BE SURE THE TWO ENDS ARE WELL CONNECTED OR MOTOR WILL NOT OPERATE. UPON A POWER FAILURE ONE OF THE FIRST THINGS TO CHECK ARE THE CONNECTED WIRES.
Electrical Wiring Cable That Connects Power Transformer to Wall Outlet (Note Yellow Electrical Warning Label)
Transformer End
Connect Transformer to Wire Cable. Again check it is secure.
Completely Connected Assembly of Motor to Power Transformer to Wire Cable for Plugging Into Wall Outlet.
Split Push Button Release With Wire
Note the Openings in this Connector Cap. Take care not to bend the prongs this end caps onto during installation of the release button.
