OLPC XO-4 Touch Battery Replacement AWS

OLPC XO-4 Touch Battery Replacement

OLPC XO-4 Touch Battery Replacement This guide will walk you through the process of replacing a dead or dying battery in the OLPC XO4 Touch

Written By: Robby Hubilla

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

OLPC XO-4 Touch Battery Replacement

INTRODUCTION Use this guide to replace a broken or dead battery.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

OLPC XO-4 Touch Battery Replacement

Step 1 — Battery 

Turn the laptop upside-down, with the handle facing away from you.

Step 2



Pull the lock tabs towards the green outer edges of the laptop.



Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

OLPC XO-4 Touch Battery Replacement

Step 3



Lift up on the middle of the battery to remove it from the device.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-26 05:00:46 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4