Olympus Stylus 760 Case Replacement AWS

Report 4 Downloads 90 Views
Olympus Stylus 760 Case Replacement

Olympus Stylus 760 Case Replacement Instructions on how to take apart the outer case and to split the camera into the two main parts.

Written By: Tracy Donovan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Olympus Stylus 760 Case Replacement

TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

Olympus Stylus 760 Case Replacement

Step 1 — Case 

Remove the 2 screws from the bottom of the camera



Remove the screw from the right side of the camera.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

Olympus Stylus 760 Case Replacement

Step 3 

Remove the two screws from the left side of the camera

Step 4



Separate the front casing from the back using a plastic opening tool, gently.

 Silver band and buttons will become loose when you remove the two pieces.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 6

Olympus Stylus 760 Case Replacement

Step 5



Pull the silver bracket and buttons off of the camera

Step 6



Remove the 2 screws on the right side of the camera.



Remove the 2 screws on the left side of the camera.

 Circuit ribbon is attached at the top-left of the camera. Be careful when separating the front and back of the camera. 

Pull the camera apart into 2 separate pieces.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 6

Olympus Stylus 760 Case Replacement

Step 7 

Flip up clip on circuit ribbon, carefully



Detach the ribbon from the rear to the front and pull it out, gently.

Step 8

 You will be left with four major pieces

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-10 03:58:00 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6