Onesheet Chucker Web 042116
CHUCKER 9.25”
Built to exceed the tough requirements of the modern machine shop, Kingston’s Chucker model provides high loading capacity, extreme rigidity, and the powerful cutting capability needed for large and heavy work pieces. The 4-speed headstock produces maximum torque and all machines are double chuck ready with A2-15 spindle nose. The heavily ribbed onepiece casting, the box way cross slide and the specially designed carriage with its larger contact surface area provide unsurpassed stability. Also available in 12.5” and 15” bore.
Main spindle 9.25” bore hardened and ground alloy steel for greater accuracy. Heavy duty precision taper roller bearings provide rigid support
Spindle Torque Charts
Hardened and ground gears
H6 Turret with 3” boring bar holder.
For more information or to find your local dealer, visit us at www.kingstonmachine.com
CHUCKER 9.25” Features • 40/50HP, spindle motor (Fanuc) • 28” Bed Width with Two V Ways • Box Way Cross Slide on Carriage • FANUC 0iTD Controller with Manual Guide i, 10.4” LCD Monitor • H6 350 Turret with 3” boring bar holder • Headstock Cooling System • Front Chip Pan and Rear Chip Conveyor • No Tailstock
40” 24” 33” 50” 28”
Headstock Spindle Bore Spindle motor Type of Spindle Nose Hght. Floor to Spindle Center
9.25” 40/50 HP A2-15 50”
Gear Box Number of Speed Ranges Spindle Speed
4 6 to 600
Turret Traverse Max. Stroke
H6-350 43"
7.87" (200)
Capacity Swing Over Bed Swing Over Cross Slide Maximum Cutting Diameter Z-Axis Travel Width of Bed
Rapid Traverse
) 100
(1
Motor Servo Motor
7.87" (200)
3.9 (10 3" 0)
7.8 (20 7" 0)
Ball Screw
15.7” (400)
H6 350 X-Axis Z-Axis X-Axis Z-Axis
19.7” 50” 236 in/min 236 in/min
X-Axis Z-Axis
5 HP 9 HP
X-Axis Z-Axis
Ø1.26” , P=5 Ø2.5” , P=10
Dimension Floor Space
236” x 130” x 85”
Weight
25,520 lbs
Total Power Required
60 KVA
軸端至刀塔最大移動量1805
104” (2646) 53” (1355)
104” (2646)
78” (2002)
50”(1260)
78” (2002)
50” (1291)
50”(1260)
53” (1355)
50” (1291)
154”(3920)
69” (1762) 224”(5682)
1250
700
154”(3920)
69” (1762) 224”(5682)
CHUCKER 10”
Built to exceed the tough requirements of the modern machine shop, Kingston’s Chucker model provides high loading capacity, extreme rigidity, and the powerful cutting capability needed for large and heavy work pieces. The 4-speed headstock produces maximum torque and all machines are double chuck ready with A2-15 spindle nose. The heavily ribbed onepiece casting, the box way cross slide and the specially designed carriage with its larger contact surface area provide unsurpassed stability. Also available in 12.5” and 15” bore.
Main spindle 10” bore hardened and ground alloy steel for greater accuracy. Heavy duty precision taper roller bearings provide rigid support
Spindle Torque Charts
Hardened and ground gears
H6 Turret with 3” boring bar holder.
For more information or to find your local dealer, visit us at www.kingstonmachine.com
CHUCKER 10” Features • 40/50HP, spindle motor (Fanuc) • 28” Bed Width with Two V Ways • Box Way Cross Slide on Carriage • FANUC 0iTD Controller with Manual Guide i, 10.4” LCD Monitor • H6 350 Turret with 3” boring bar holder • Headstock Cooling System • Front Chip Pan and Rear Chip Conveyor • No Tailstock
40” 24” 33” 50” 28”
Headstock Spindle Bore Spindle motor Type of Spindle Nose Hght. Floor to Spindle Center
10” 40/50 HP A2-15 50”
Gear Box Number of Speed Ranges Spindle Speed
4 6 to 600
Turret Traverse Max. Stroke
H6-350 43"
7.87" (200)
Capacity Swing Over Bed Swing Over Cross Slide Maximum Cutting Diameter Z-Axis Travel Width of Bed
Rapid Traverse
) 100
(1
Motor Servo Motor
7.87" (200)
3.9 (10 3" 0)
7.8 (20 7" 0)
Ball Screw
15.7” (400)
H6 350 X-Axis Z-Axis X-Axis Z-Axis
19.7” 50” 236 in/min 236 in/min
X-Axis Z-Axis
5 HP 9 HP
X-Axis Z-Axis
Ø1.26” , P=5 Ø2.5” , P=10
Dimension Floor Space
236” x 130” x 85”
Weight
25,520 lbs
Total Power Required
60 KVA
軸端至刀塔最大移動量1805
104” (2646) 53” (1355)
104” (2646)
78” (2002)
50”(1260)
78” (2002)
50” (1291)
50”(1260)
53” (1355)
50” (1291)
154”(3920)
69” (1762) 224”(5682)
1250
700
154”(3920)
69” (1762) 224”(5682)
CHUCKER 12.5” & 14.5”
Kingston’s Chucker series is designed to tackle large and heavy work pieces. These heavy duty big bore turning centers are available with 12.5” and 14.5” bore. All machines are equipped with a 4-speed headstock for maximum torque, A2-20 spindle nose and are front and rear chuck ready. The heavily ribbed one piece casting allows for heavy loading and vibration buffering while the 28” wide two V-way bed and the unique box way cross slide provide the stability and heavy cutting capability Kingston built its name on. Also available with 9.25” bore.
Main spindle 12.5” or 14.5” bore. Rigid and thick spindle wall ideal for cutting heavy and extremely hard materials. Heavy duty precision taper roller bearings provide rigid support
Spindle Torque Charts
Hardened and ground gears
H6 Turret with 3” boring bar holder.
For more information or to find your local dealer, visit us at www.kingstonmachine.com
CHUCKER 12.5” & 14.5” Features • 40HP / 50HP, AC spindle motor (Fanuc) • 28” Bed Width with Two V Ways • Box Way Cross Slide on Carriage • FANUC 0iTD Controller with Manual Guide i, 10.4” LCD Monitor • H6 350 Turret with 3” boring bar holder • Headstock Cooling System
Capacity Swing Over Bed Maximum Cutting Diameter Maximum Cutting Length Z Axis Travel Width of Bed
34” / 40” 33” 70” 60” 28”
Headstock Spindle Bore Spindle motor Type of Spindle Nose Hght. Floor to Spindle Center
12.5 / 14.5” 40/ 50 HP A2-20 46.65” / 49.60”
Gear Box Number of Speed Ranges Spindle Speed
• Hydraulic and Manual Quill Movement • 1770 Front Chip Pan and Rear Chip Conveyor • No Tailstock
Turret Traverse Max. Stroke
1.97”(50)
1.97”(50)
3" 45. 0) 5 (11
13.8" (350)
Ball Screw
10 to 300
H6 350
X-Axis Z-Axis Rapid Traverse X-Axis Z-Axis Motor Servo Motor
4 10 to 400 (CK) 10 to 300 (CG)
19.7” 70” 236 in / mm 236 in / mm
X-Axis Z-Axis
5 HP 9 HP
X-Axis Z-Axis
Ø1.26”, P=5 Ø2.5”, P=10
Dimension Floor Space
103”W x 255”L
Weight CK-34” CK-40” CG-34” CG-40”
26,000 lbs 27,500 lbs 27,320 lbs 28,820 lbs
Total Power Required
60 KVA
inch (mm)
184” (4675) 254” (6450)
Swing over bed
C
34” 40”
47” (1185) 50” (1260)
Built to exceed the tough requirements of the modern machine shop, Kingston’s Chucker model provides high loading capacity, extreme rigidity, and the powerful cutting capability needed for large and heavy work pieces. The 4-speed headstock produces maximum torque and all machines are double chuck ready with A2-15 spindle nose. The heavily ribbed onepiece casting, the box way cross slide and the specially designed carriage with its larger contact surface area provide unsurpassed stability. Also available in 12.5” and 15” bore.
Main spindle 9.25” bore hardened and ground alloy steel for greater accuracy. Heavy duty precision taper roller bearings provide rigid support
Spindle Torque Charts
Hardened and ground gears
H6 Turret with 3” boring bar holder.
For more information or to find your local dealer, visit us at www.kingstonmachine.com
CHUCKER 9.25” Features • 40/50HP, spindle motor (Fanuc) • 28” Bed Width with Two V Ways • Box Way Cross Slide on Carriage • FANUC 0iTD Controller with Manual Guide i, 10.4” LCD Monitor • H6 350 Turret with 3” boring bar holder • Headstock Cooling System • Front Chip Pan and Rear Chip Conveyor • No Tailstock
40” 24” 33” 50” 28”
Headstock Spindle Bore Spindle motor Type of Spindle Nose Hght. Floor to Spindle Center
9.25” 40/50 HP A2-15 50”
Gear Box Number of Speed Ranges Spindle Speed
4 6 to 600
Turret Traverse Max. Stroke
H6-350 43"
7.87" (200)
Capacity Swing Over Bed Swing Over Cross Slide Maximum Cutting Diameter Z-Axis Travel Width of Bed
Rapid Traverse
) 100
(1
Motor Servo Motor
7.87" (200)
3.9 (10 3" 0)
7.8 (20 7" 0)
Ball Screw
15.7” (400)
H6 350 X-Axis Z-Axis X-Axis Z-Axis
19.7” 50” 236 in/min 236 in/min
X-Axis Z-Axis
5 HP 9 HP
X-Axis Z-Axis
Ø1.26” , P=5 Ø2.5” , P=10
Dimension Floor Space
236” x 130” x 85”
Weight
25,520 lbs
Total Power Required
60 KVA
軸端至刀塔最大移動量1805
104” (2646) 53” (1355)
104” (2646)
78” (2002)
50”(1260)
78” (2002)
50” (1291)
50”(1260)
53” (1355)
50” (1291)
154”(3920)
69” (1762) 224”(5682)
1250
700
154”(3920)
69” (1762) 224”(5682)
CHUCKER 10”
Built to exceed the tough requirements of the modern machine shop, Kingston’s Chucker model provides high loading capacity, extreme rigidity, and the powerful cutting capability needed for large and heavy work pieces. The 4-speed headstock produces maximum torque and all machines are double chuck ready with A2-15 spindle nose. The heavily ribbed onepiece casting, the box way cross slide and the specially designed carriage with its larger contact surface area provide unsurpassed stability. Also available in 12.5” and 15” bore.
Main spindle 10” bore hardened and ground alloy steel for greater accuracy. Heavy duty precision taper roller bearings provide rigid support
Spindle Torque Charts
Hardened and ground gears
H6 Turret with 3” boring bar holder.
For more information or to find your local dealer, visit us at www.kingstonmachine.com
CHUCKER 10” Features • 40/50HP, spindle motor (Fanuc) • 28” Bed Width with Two V Ways • Box Way Cross Slide on Carriage • FANUC 0iTD Controller with Manual Guide i, 10.4” LCD Monitor • H6 350 Turret with 3” boring bar holder • Headstock Cooling System • Front Chip Pan and Rear Chip Conveyor • No Tailstock
40” 24” 33” 50” 28”
Headstock Spindle Bore Spindle motor Type of Spindle Nose Hght. Floor to Spindle Center
10” 40/50 HP A2-15 50”
Gear Box Number of Speed Ranges Spindle Speed
4 6 to 600
Turret Traverse Max. Stroke
H6-350 43"
7.87" (200)
Capacity Swing Over Bed Swing Over Cross Slide Maximum Cutting Diameter Z-Axis Travel Width of Bed
Rapid Traverse
) 100
(1
Motor Servo Motor
7.87" (200)
3.9 (10 3" 0)
7.8 (20 7" 0)
Ball Screw
15.7” (400)
H6 350 X-Axis Z-Axis X-Axis Z-Axis
19.7” 50” 236 in/min 236 in/min
X-Axis Z-Axis
5 HP 9 HP
X-Axis Z-Axis
Ø1.26” , P=5 Ø2.5” , P=10
Dimension Floor Space
236” x 130” x 85”
Weight
25,520 lbs
Total Power Required
60 KVA
軸端至刀塔最大移動量1805
104” (2646) 53” (1355)
104” (2646)
78” (2002)
50”(1260)
78” (2002)
50” (1291)
50”(1260)
53” (1355)
50” (1291)
154”(3920)
69” (1762) 224”(5682)
1250
700
154”(3920)
69” (1762) 224”(5682)
CHUCKER 12.5” & 14.5”
Kingston’s Chucker series is designed to tackle large and heavy work pieces. These heavy duty big bore turning centers are available with 12.5” and 14.5” bore. All machines are equipped with a 4-speed headstock for maximum torque, A2-20 spindle nose and are front and rear chuck ready. The heavily ribbed one piece casting allows for heavy loading and vibration buffering while the 28” wide two V-way bed and the unique box way cross slide provide the stability and heavy cutting capability Kingston built its name on. Also available with 9.25” bore.
Main spindle 12.5” or 14.5” bore. Rigid and thick spindle wall ideal for cutting heavy and extremely hard materials. Heavy duty precision taper roller bearings provide rigid support
Spindle Torque Charts
Hardened and ground gears
H6 Turret with 3” boring bar holder.
For more information or to find your local dealer, visit us at www.kingstonmachine.com
CHUCKER 12.5” & 14.5” Features • 40HP / 50HP, AC spindle motor (Fanuc) • 28” Bed Width with Two V Ways • Box Way Cross Slide on Carriage • FANUC 0iTD Controller with Manual Guide i, 10.4” LCD Monitor • H6 350 Turret with 3” boring bar holder • Headstock Cooling System
Capacity Swing Over Bed Maximum Cutting Diameter Maximum Cutting Length Z Axis Travel Width of Bed
34” / 40” 33” 70” 60” 28”
Headstock Spindle Bore Spindle motor Type of Spindle Nose Hght. Floor to Spindle Center
12.5 / 14.5” 40/ 50 HP A2-20 46.65” / 49.60”
Gear Box Number of Speed Ranges Spindle Speed
• Hydraulic and Manual Quill Movement • 1770 Front Chip Pan and Rear Chip Conveyor • No Tailstock
Turret Traverse Max. Stroke
1.97”(50)
1.97”(50)
3" 45. 0) 5 (11
13.8" (350)
Ball Screw
10 to 300
H6 350
X-Axis Z-Axis Rapid Traverse X-Axis Z-Axis Motor Servo Motor
4 10 to 400 (CK) 10 to 300 (CG)
19.7” 70” 236 in / mm 236 in / mm
X-Axis Z-Axis
5 HP 9 HP
X-Axis Z-Axis
Ø1.26”, P=5 Ø2.5”, P=10
Dimension Floor Space
103”W x 255”L
Weight CK-34” CK-40” CG-34” CG-40”
26,000 lbs 27,500 lbs 27,320 lbs 28,820 lbs
Total Power Required
60 KVA
inch (mm)
184” (4675) 254” (6450)
Swing over bed
C
34” 40”
47” (1185) 50” (1260)
