Optical Data Transmission Device - Sentech Industries
Optical Data Transmission Device
D
Optical data transmission device Optical Data Transmission Device
DMS SERIES
With projection amount adjuster ● Area
adjustment can be made by pr ojection amount adjuster. suitable for data tr ansmission such as interlocking with carrier robots, indicating destination of AGVs etc. ● Price is as well reasonable level, with two models of 4BIT parallel ty pe and two models of 8BIT parallel type. ● It is
■ Applications Instruction of destination/ Job to AGV
Instruction of stacker crane address
Data transmission between micro-c om puters
■ Specifications 4BIT model Type Model No. Direction Transmission distance Directional angle (full angle)
DMS-GA1-V Head-on 1m 30°
DMS-GA2-V 3m 10°
Transmission area
Transmission method Transmission time Modulation method Detection method Projecting element Receiving element Power source Current consumption Input Output Current consumption Ambient illuminance Ambient temperature/humidity Connection Protective structure Case Weight ＊DM S-GB1- W
Parallel type DMS-GA1-W＊ 0.5m
DMS-HA1-V Side-on 1m 30°
DMS-HA2-V 3m 10°
±0.4m at 0.5m Half duplex two-way transmission 40msec or less Pulse modulation Parity check Near infrared LED Photo-transistor 10 to 30VDC (Available range) 100mA or less Contact or contactless open-collector (ON current 2.5mA or more, OFF current 1mA or less) NPN Open-collector (30V, 50mA or less) 100mA Max. 4,000lux or less (incandescent light) -10 to +50℃, 85%RH or less Lead wire (0.2mm2 15 cores shield wire in 2m) IP64 (IEC Standard) Polycarbonate Approx. 280g
with 8-bit is also available.(Transmission are is the same as DM S-GA1- W.)
3 3
8BIT model Type Model Direction Transmission distance Directional angle (full angle) Transmission method Transmission time Modulation method Detection method Projecting element Receiving element Power source Current consumption Input Output Current consumption Ambient illuminance Ambient temperature/humidity Connection Protective structure Case Weight
Parallel type DMS-GB1-V DMS-GB2-V DMS-HB1-V DMS-HB2-V Head-on Side-on 1m 3m 1m 3m 10° 30° 30° 10° Half duplex two-way transmission 40msec or less Pulse modulation Parity check Near infrared LED Photo-transistor 10 to 30VDC (Available range) 100mA or less Contact or contactless open-collector(ON current 2.5mA or more, OFF current 1mA or less) NPN Open-collector(30V, 50mA or less) 100mA Max. 4,000lux or less(incandescent light) -10 to +50℃, 85%RH or less Lead wire(0.2mm2 22 cores shield wire in 2m) IP64(IEC Standard) Polycarbonate Approx. 280g
D
Optical Data Transmission Device
■ Input/Output circuit Input section(common)
Output section(common)
+VIN 330Ω 3.3kΩ +5V
+5V
IN
Lamp
R
Lamp
1/4W
OUT
COM
COM
NPN open-collector output 30VDC 50mA Residual voltage 1.8V or less
Contact or contactless open-collector ON current: 2.5mA or more, OFF current: 1mA or less Note) 2-wire type sensor can't be used. (operating threshold current: 1.5 to 2mA)
■ External dimensions
Projection amount adjuster
(Beam direction) Side-on
30 7 3
Projection element Reception element
20
(14.5)
Transmission window
LED
2-φ4.5 mounting hole
(14.5)
Projection amount adjuster Projection element
50
4
28
28 50 (64.5)
4
10
(64.5)
3 10
42 50
φ20
30
7 3
LED
30
2-φ4.5mounting hole
Transmission window
Reception element
20
Side-on type
2.5
Head-on type
Lead wire
Lead wire
φ20 30
(Beam direction) Head-on
4
42 50
■ Connection 4BIT model
8BIT model Lead wire
Lead wire
15P connector
D
12P connector(1)
shield
Lead wire Black Brown Red Orange White/Yellow Yellow
White/Blue Green Blue Purple Gray White Yellow/Green Yellow/Red Yellow/Black Shield
Connector(1)
Spec. Pin No. IN1 1 2 IN2 IN3 3 IN4 4 MODE＊1 5 6 SELECT＊2 NC 7 OUT1 8 9 OUT2 OUT3 10 OUT4 11 12 GO＊3 COM(0V) 13 +VIN 14 -VIN(0V) 15 Shield
＊1. Mode input
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12
Lead wire Light blue Pink White White/Black Brown Brown/Black Red Red/Black Orange Orange/Black Yellow Yellow/Black
Connector(2)
Spec. COM(0V) MODE＊1 SELECT＊2 GO＊3 IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4
lead wire Green Green/Black Blue Blue/Black Purple Purple/Black Gray Gray/Black Pink/Black Light blue/Black Shield
Pin No. 1 2 3 4 5 6 7 8 9 10 Shield
Spec. IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 +VIN -VIN
Optical data Data transmission Transmissiondevice Device
10P connector(2)
shield
＊2. Select input
This is designed to select standby transmission and reception mode. ● Transmission standby mode when it is opened between MODE and I/O COM. ● Reception standby mode when it is short circuited between MODE and I/O COM.
tween SELECT and I/O COM. This is designed to arbitrarily stop transmission＊3. GO output and reception operation by outside signal arbi- This is designed to check for correct reception tarily. of optical signal. ● Operates when it is opened between SE● it is ON when optical signal is received. LECT and I/O COM. ● it is OFF when optical signal is interrupted(or non-receiving state). ● Stops operation when it is short curcuited be-
Note) Terminal ends handling of not using input, output, GO out the other lead wires. If handled in one treatment, it will caus Note) The connector attached can not be used as relay terminal. Note) If one is set to transmission standby mode, set other one
put, SELECT input, MODE input and NC(4BIT type) are to be treat e malfunction.
ed individually and not touchi
to reception standby mode.
■SEMI standard Model No. Model DMS-HB1-Z05 DMS-HB1-Z06 DMS-HB1-Z09 DMS-HB1-Z10
Beam direction
Side-on
Cable length 5m 2m 5m 2m
＊Equipment in corresponding to SEMI E84-0699 and -0999 may use m
Inch screw is specified on the version after SEMI E84-0200A.
Remarks Fitting screw: Millimeter screw Fitting screw: Inch screw＊
illimeter screw.
☆PNP output is also lined-up. Ask us.
55
D
Optical data transmission device Optical Data Transmission Device
DMS SERIES
With projection amount adjuster ● Area
adjustment can be made by pr ojection amount adjuster. suitable for data tr ansmission such as interlocking with carrier robots, indicating destination of AGVs etc. ● Price is as well reasonable level, with two models of 4BIT parallel ty pe and two models of 8BIT parallel type. ● It is
■ Applications Instruction of destination/ Job to AGV
Instruction of stacker crane address
Data transmission between micro-c om puters
■ Specifications 4BIT model Type Model No. Direction Transmission distance Directional angle (full angle)
DMS-GA1-V Head-on 1m 30°
DMS-GA2-V 3m 10°
Transmission area
Transmission method Transmission time Modulation method Detection method Projecting element Receiving element Power source Current consumption Input Output Current consumption Ambient illuminance Ambient temperature/humidity Connection Protective structure Case Weight ＊DM S-GB1- W
Parallel type DMS-GA1-W＊ 0.5m
DMS-HA1-V Side-on 1m 30°
DMS-HA2-V 3m 10°
±0.4m at 0.5m Half duplex two-way transmission 40msec or less Pulse modulation Parity check Near infrared LED Photo-transistor 10 to 30VDC (Available range) 100mA or less Contact or contactless open-collector (ON current 2.5mA or more, OFF current 1mA or less) NPN Open-collector (30V, 50mA or less) 100mA Max. 4,000lux or less (incandescent light) -10 to +50℃, 85%RH or less Lead wire (0.2mm2 15 cores shield wire in 2m) IP64 (IEC Standard) Polycarbonate Approx. 280g
with 8-bit is also available.(Transmission are is the same as DM S-GA1- W.)
3 3
8BIT model Type Model Direction Transmission distance Directional angle (full angle) Transmission method Transmission time Modulation method Detection method Projecting element Receiving element Power source Current consumption Input Output Current consumption Ambient illuminance Ambient temperature/humidity Connection Protective structure Case Weight
Parallel type DMS-GB1-V DMS-GB2-V DMS-HB1-V DMS-HB2-V Head-on Side-on 1m 3m 1m 3m 10° 30° 30° 10° Half duplex two-way transmission 40msec or less Pulse modulation Parity check Near infrared LED Photo-transistor 10 to 30VDC (Available range) 100mA or less Contact or contactless open-collector(ON current 2.5mA or more, OFF current 1mA or less) NPN Open-collector(30V, 50mA or less) 100mA Max. 4,000lux or less(incandescent light) -10 to +50℃, 85%RH or less Lead wire(0.2mm2 22 cores shield wire in 2m) IP64(IEC Standard) Polycarbonate Approx. 280g
D
Optical Data Transmission Device
■ Input/Output circuit Input section(common)
Output section(common)
+VIN 330Ω 3.3kΩ +5V
+5V
IN
Lamp
R
Lamp
1/4W
OUT
COM
COM
NPN open-collector output 30VDC 50mA Residual voltage 1.8V or less
Contact or contactless open-collector ON current: 2.5mA or more, OFF current: 1mA or less Note) 2-wire type sensor can't be used. (operating threshold current: 1.5 to 2mA)
■ External dimensions
Projection amount adjuster
(Beam direction) Side-on
30 7 3
Projection element Reception element
20
(14.5)
Transmission window
LED
2-φ4.5 mounting hole
(14.5)
Projection amount adjuster Projection element
50
4
28
28 50 (64.5)
4
10
(64.5)
3 10
42 50
φ20
30
7 3
LED
30
2-φ4.5mounting hole
Transmission window
Reception element
20
Side-on type
2.5
Head-on type
Lead wire
Lead wire
φ20 30
(Beam direction) Head-on
4
42 50
■ Connection 4BIT model
8BIT model Lead wire
Lead wire
15P connector
D
12P connector(1)
shield
Lead wire Black Brown Red Orange White/Yellow Yellow
White/Blue Green Blue Purple Gray White Yellow/Green Yellow/Red Yellow/Black Shield
Connector(1)
Spec. Pin No. IN1 1 2 IN2 IN3 3 IN4 4 MODE＊1 5 6 SELECT＊2 NC 7 OUT1 8 9 OUT2 OUT3 10 OUT4 11 12 GO＊3 COM(0V) 13 +VIN 14 -VIN(0V) 15 Shield
＊1. Mode input
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12
Lead wire Light blue Pink White White/Black Brown Brown/Black Red Red/Black Orange Orange/Black Yellow Yellow/Black
Connector(2)
Spec. COM(0V) MODE＊1 SELECT＊2 GO＊3 IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4
lead wire Green Green/Black Blue Blue/Black Purple Purple/Black Gray Gray/Black Pink/Black Light blue/Black Shield
Pin No. 1 2 3 4 5 6 7 8 9 10 Shield
Spec. IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 +VIN -VIN
Optical data Data transmission Transmissiondevice Device
10P connector(2)
shield
＊2. Select input
This is designed to select standby transmission and reception mode. ● Transmission standby mode when it is opened between MODE and I/O COM. ● Reception standby mode when it is short circuited between MODE and I/O COM.
tween SELECT and I/O COM. This is designed to arbitrarily stop transmission＊3. GO output and reception operation by outside signal arbi- This is designed to check for correct reception tarily. of optical signal. ● Operates when it is opened between SE● it is ON when optical signal is received. LECT and I/O COM. ● it is OFF when optical signal is interrupted(or non-receiving state). ● Stops operation when it is short curcuited be-
Note) Terminal ends handling of not using input, output, GO out the other lead wires. If handled in one treatment, it will caus Note) The connector attached can not be used as relay terminal. Note) If one is set to transmission standby mode, set other one
put, SELECT input, MODE input and NC(4BIT type) are to be treat e malfunction.
ed individually and not touchi
to reception standby mode.
■SEMI standard Model No. Model DMS-HB1-Z05 DMS-HB1-Z06 DMS-HB1-Z09 DMS-HB1-Z10
Beam direction
Side-on
Cable length 5m 2m 5m 2m
＊Equipment in corresponding to SEMI E84-0699 and -0999 may use m
Inch screw is specified on the version after SEMI E84-0200A.
Remarks Fitting screw: Millimeter screw Fitting screw: Inch screw＊
illimeter screw.
☆PNP output is also lined-up. Ask us.
55
