Outdoor LED Guide 140-173 2014.indd - Hubbell Outdoor Lighting
Cimarron CR1D
Solar Area/Site Lighter
SOLAR
• The LED CR1 unit is used with Hubbell Lighting’s solar lighting package; This DC unit is powered by the solar panel and battery that is custom designed for your location; Typical applications include roadway, parking, area and perimeter lighting • Die-cast aluminum housing provides light weight, yet durable protection; Access to driver from two screws and hinged door for both mounting and wiring • A 30LED light engine provides standard IES distributions of Type II, III, IV, V square with up to 86 LPW efficiency
• Each LED has individual optical lens so every source contributes to the same IES pattern • Units are available in 35w, 50w, and 70w configurations; 12V DC input current • CR1 fixtures feature straight arm mounting or optional mast arm fitter to 2 3/8” OD pipe • IP-65 LED light engine assembly and driver(s) • Units are designed to operate from -35˚ C to 40˚ C ambient • Suitable for use in wet locations
ORDERING INFORMATION (Must be ordered with Hubbell Lighting solar power assembly, see specification sheets for detailed information)
CR1D SERIES CR1D Solar
Cimarron
30LD MOUNTING A Arm mount (6”
straight rigid arm included & acceptable for 90˚ configurations)
CCT
NUMBER OF LEDS/VOLTAGE
4K 4000K nominal 5K 5000K nominal
30LD 30 LEDs, 12V DC
for 2 3/8” OD horizontal arm
DIMENSIONS 16.0" 16.0" mm 406.4 16.0" 406.4 mm 406.4 mm
3.30
16.0" 16.0" mm 406.4 16.0" 406.4 mm 406.4 mm
5.59
.83
3.40 1.95 5.62
1.16
1.95 3.89
21.75" 21.75" 522.5 mm 21.75" 522.5 mm 522.5 mm 6.75" 6.75" mm 171.5 6.75" 171.5 mm 171.5 mm
3.40 1.95 1.95 3.89
STRAIGHT ARM STRAIGHT ARM STRAIGHT ARM 6.313" 6.313" 160.3 mm 6.313" 160.3 mm 160.3 mm 6.625" 6.625" 168.3 mm 6.625" 168.3 mm 168.3 mm
174
7.25" 7.25" mm 184.2 7.25"
2.50
5.59
5.625" 5.625" 143.9 mm 5.625" 143.9 mm 143.9 mm
UPSWEPT ARM UPSWEPT ARM UPSWEPT ARM
2 Type II 3 Type III 4 Type IV 5 Type V
MAF Mast arm fitter
6.0" 6.0" mm 152.4 6.0" 152.4 mm 152.4 mm
IES DISTRIBUTION
5.62
1.16
MAST ARM FITTER OPTION
DRIVE CURRENT 035 350 mA (35w) 052 525 mA (50w) 070 700 mA (71w)
FINISH DB Dark Bronze GR Gray
Solar Area/Site Lighter
SOLAR
• The LED CR1 unit is used with Hubbell Lighting’s solar lighting package; This DC unit is powered by the solar panel and battery that is custom designed for your location; Typical applications include roadway, parking, area and perimeter lighting • Die-cast aluminum housing provides light weight, yet durable protection; Access to driver from two screws and hinged door for both mounting and wiring • A 30LED light engine provides standard IES distributions of Type II, III, IV, V square with up to 86 LPW efficiency
• Each LED has individual optical lens so every source contributes to the same IES pattern • Units are available in 35w, 50w, and 70w configurations; 12V DC input current • CR1 fixtures feature straight arm mounting or optional mast arm fitter to 2 3/8” OD pipe • IP-65 LED light engine assembly and driver(s) • Units are designed to operate from -35˚ C to 40˚ C ambient • Suitable for use in wet locations
ORDERING INFORMATION (Must be ordered with Hubbell Lighting solar power assembly, see specification sheets for detailed information)
CR1D SERIES CR1D Solar
Cimarron
30LD MOUNTING A Arm mount (6”
straight rigid arm included & acceptable for 90˚ configurations)
CCT
NUMBER OF LEDS/VOLTAGE
4K 4000K nominal 5K 5000K nominal
30LD 30 LEDs, 12V DC
for 2 3/8” OD horizontal arm
DIMENSIONS 16.0" 16.0" mm 406.4 16.0" 406.4 mm 406.4 mm
3.30
16.0" 16.0" mm 406.4 16.0" 406.4 mm 406.4 mm
5.59
.83
3.40 1.95 5.62
1.16
1.95 3.89
21.75" 21.75" 522.5 mm 21.75" 522.5 mm 522.5 mm 6.75" 6.75" mm 171.5 6.75" 171.5 mm 171.5 mm
3.40 1.95 1.95 3.89
STRAIGHT ARM STRAIGHT ARM STRAIGHT ARM 6.313" 6.313" 160.3 mm 6.313" 160.3 mm 160.3 mm 6.625" 6.625" 168.3 mm 6.625" 168.3 mm 168.3 mm
174
7.25" 7.25" mm 184.2 7.25"
2.50
5.59
5.625" 5.625" 143.9 mm 5.625" 143.9 mm 143.9 mm
UPSWEPT ARM UPSWEPT ARM UPSWEPT ARM
2 Type II 3 Type III 4 Type IV 5 Type V
MAF Mast arm fitter
6.0" 6.0" mm 152.4 6.0" 152.4 mm 152.4 mm
IES DISTRIBUTION
5.62
1.16
MAST ARM FITTER OPTION
DRIVE CURRENT 035 350 mA (35w) 052 525 mA (50w) 070 700 mA (71w)
FINISH DB Dark Bronze GR Gray
