Overvoltage & EMI Protection for Home and Office Overvoltage & EMI ...
Overvoltage & EMI Protection for Home and Office Overvoltage Protection Class III EMI protection Sensitive electronic equipment protection Protection solutions for EIB and servers DIN rail mounting
BE ON THE SAFE SIDE
PROFILT D
Overvoltage & EMI Protection for Home and Office
Category IEC/EN/VDE:
Class III / Type 3 / C
Location of use:
Branch sub-distribution box
Connection:
TN-S, TT
Protection modes:
L/N - PE
Protective elements:
MOV, GDT and EMI filter
Surge discharge rating: Uoc/Isc = 6kV/3kA Fault indication:
Light
Complies with:
IEC-61643-1
Product Profilt D 8A is an electromagnetic interference (EMI) and overvoltage protective device of class III. It is designed for complete protection and is installed directly in front of protected devices on DIN rail. Protected electrical device is safe against effects of overvoltage, electrostatic voltage and electromagnetic interferences. These disturbances, which are present in all electrical systems, are caused by other electrical devices, by switching maneuvers, by defects in electrical network and by other activities, such as welding. PROFILT D protect devices such as: - TV - PC - EIB installation - Server - Control and regulation devices Technical characteristics PROFILT D 8A
Type
Max. continuous operating voltage (AC/DC)
Uc
275 V / 50 Hz
Max. load current
IL
8A
Combination wave (1.2/50, 8/20)
Uoc/Isc
Protection lavel
Up
6 kV / 3 kA ≤ 800 V < 70 dB @ 5MHz
Asymetrical attenuation Mechanical characteristics
1.5 mm2 (stranded)
Terminal cross section
Thermoplastic
Housing
33 x 90 x 57 mm
Dimensions (W x H x D) Ordering code
130 061
For effective surge protection we recommend installation of SPD class I and II in electrical distribution board.
ISKRA ZAŠČITE, d.o.o., Surge Voltage Protection Systems, Engineering and Cooperation Stegne 35, 1521 Ljubljana, SLOVENIA T: +386(1)5003 100; F: +386(1)5003 236; E: [email protected] www.iskrazascite.si
Published by: ISKRA ZA[^ITE, d.o.o. / March 2011 /
Electrical characteristics
BE ON THE SAFE SIDE
PROFILT D
Overvoltage & EMI Protection for Home and Office
Category IEC/EN/VDE:
Class III / Type 3 / C
Location of use:
Branch sub-distribution box
Connection:
TN-S, TT
Protection modes:
L/N - PE
Protective elements:
MOV, GDT and EMI filter
Surge discharge rating: Uoc/Isc = 6kV/3kA Fault indication:
Light
Complies with:
IEC-61643-1
Product Profilt D 8A is an electromagnetic interference (EMI) and overvoltage protective device of class III. It is designed for complete protection and is installed directly in front of protected devices on DIN rail. Protected electrical device is safe against effects of overvoltage, electrostatic voltage and electromagnetic interferences. These disturbances, which are present in all electrical systems, are caused by other electrical devices, by switching maneuvers, by defects in electrical network and by other activities, such as welding. PROFILT D protect devices such as: - TV - PC - EIB installation - Server - Control and regulation devices Technical characteristics PROFILT D 8A
Type
Max. continuous operating voltage (AC/DC)
Uc
275 V / 50 Hz
Max. load current
IL
8A
Combination wave (1.2/50, 8/20)
Uoc/Isc
Protection lavel
Up
6 kV / 3 kA ≤ 800 V < 70 dB @ 5MHz
Asymetrical attenuation Mechanical characteristics
1.5 mm2 (stranded)
Terminal cross section
Thermoplastic
Housing
33 x 90 x 57 mm
Dimensions (W x H x D) Ordering code
130 061
For effective surge protection we recommend installation of SPD class I and II in electrical distribution board.
ISKRA ZAŠČITE, d.o.o., Surge Voltage Protection Systems, Engineering and Cooperation Stegne 35, 1521 Ljubljana, SLOVENIA T: +386(1)5003 100; F: +386(1)5003 236; E: [email protected] www.iskrazascite.si
Published by: ISKRA ZA[^ITE, d.o.o. / March 2011 /
Electrical characteristics
