Pairing CT-10 with iOS
Pairing CT-10 with iOS 1. First factory reset your device by scanning the following two barcodes
→
→ 2. Read the following barcodes continuously
→ 3. Restart the barcode scanner by holding the button until it beeps. Then, turn it back on. 4. Bluetooth Pairing ○ Turn on Bluetooth in your iOS device, and find the CT10 in available devices.
○
○
○
A bluetooth pairing request dialog will appear asking you to type a code. Scan from the appropriate numbers below followed by the “exit without save” barcode.
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Enter. If successful, you will hear a beep and it will show the paired device on the iOS device.
→
→ 2. Read the following barcodes continuously
→ 3. Restart the barcode scanner by holding the button until it beeps. Then, turn it back on. 4. Bluetooth Pairing ○ Turn on Bluetooth in your iOS device, and find the CT10 in available devices.
○
○
○
A bluetooth pairing request dialog will appear asking you to type a code. Scan from the appropriate numbers below followed by the “exit without save” barcode.
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Enter. If successful, you will hear a beep and it will show the paired device on the iOS device.
