Palm m105 Batteries Replacement
Palm m105 Batteries Replacement
Palm m105 Batteries Replacement This guide will help you to install and/or replace the batteries in the Palm m105.
Written By: Erik Thompson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Palm m105 Batteries Replacement
INTRODUCTION You will need to have a supply of AAA batteries for replacement. Can be found at most hardware and department stores. You can also order them online here
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Palm m105 Batteries Replacement
Step 1 — Batteries
Press the latch on the battery door on the back of the device and pull outwards.
Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Palm m105 Batteries Replacement
Step 2
Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)
Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.
Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.
Step 3
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 05:19:20 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Palm m105 Batteries Replacement This guide will help you to install and/or replace the batteries in the Palm m105.
Written By: Erik Thompson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Palm m105 Batteries Replacement
INTRODUCTION You will need to have a supply of AAA batteries for replacement. Can be found at most hardware and department stores. You can also order them online here
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Palm m105 Batteries Replacement
Step 1 — Batteries
Press the latch on the battery door on the back of the device and pull outwards.
Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Palm m105 Batteries Replacement
Step 2
Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)
Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.
Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.
Step 3
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 05:19:20 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
