Panasonic D-snap SV-AV50 Battery Replacement

Report 5 Downloads 55 Views
Panasonic D-snap SV-AV50 Battery Replacement

Panasonic D-snap SV-AV50 Battery Replacement This guide contains instructions for installing the battery in the Panasonic D-snap SV-AV50 camera.

Written By: Zoe Hinck

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Panasonic D-snap SV-AV50 Battery Replacement

INTRODUCTION You will remove the battery when it needs to be charged. You should also remove the battery and SD card before opening the camera to access the screen, motherboard, flash, lens, or any other internal part of the camera.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Panasonic D-snap SV-AV50 Battery Replacement

Step 1 — Battery 

Slide the bottom panel in the direction of the arrow on the panel.



Pull/lift open the battery cover in the direction directly away from the camera.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Panasonic D-snap SV-AV50 Battery Replacement

Step 3 

Push the small gray plastic tab away from the battery in order to release the battery.



Pull the battery out of the camera.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-16 07:55:29 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4