Panel Track Shades Installation Instructions - Blinds
Panel Track Shades Installation Instructions Please follow these Installation Instructions You will need a pencil, tape measure, drill, screwdriver, pliers, and appropriate fasteners.
Step 1: Choose the Correct Fastener 1 ½” #8 Hex Head Wood Screws (Included)
Alternative fasteners should be used for aluminum or concrete installations (Not Included with Blinds)
Step 2: Bracket Installation Installation brackets should be installed approximately 1 foot (12”) from each end of the panel track.
Additional brackets should be used when panel track is over 6 feet wide. Make sure all brackets are equally spaced.
Step 3: Panel Installation Step 4: Safety Device Installation Safety devices are designed to minimize the hazards of strangulation and entanglement of small children by restricting access to the cord or chain control. The tension device is sent from the factory already attached to each cord or chain loop.
Secure fabric panels to siding rails by pressing the Velcro strip sewn to the fabric panels to the Velro attached to the sliding rail.
Step 5: Valance Installation Valance with the round corners come preassembled from the factory. To install the valance, simply slid the top flat portion of the valance into the two extended fingers on the top of the mounting bracket. Friction will keep the valance in place.
Step 1: Choose the Correct Fastener 1 ½” #8 Hex Head Wood Screws (Included)
Alternative fasteners should be used for aluminum or concrete installations (Not Included with Blinds)
Step 2: Bracket Installation Installation brackets should be installed approximately 1 foot (12”) from each end of the panel track.
Additional brackets should be used when panel track is over 6 feet wide. Make sure all brackets are equally spaced.
Step 3: Panel Installation Step 4: Safety Device Installation Safety devices are designed to minimize the hazards of strangulation and entanglement of small children by restricting access to the cord or chain control. The tension device is sent from the factory already attached to each cord or chain loop.
Secure fabric panels to siding rails by pressing the Velcro strip sewn to the fabric panels to the Velro attached to the sliding rail.
Step 5: Valance Installation Valance with the round corners come preassembled from the factory. To install the valance, simply slid the top flat portion of the valance into the two extended fingers on the top of the mounting bracket. Friction will keep the valance in place.
