Pella Windows & Doors Inc.
TRANSMITTAL No. 1
Pella Windows & Doors Inc. COMMERCIAL DIVISION 45 Fondi Rd. Haverhill,MA 01832
Phone: 978-521-7100 Fax: 978-373-8084
PROJECT: Randolph Intergenerational Com impervia fixed casements
DATE: 09/01/2016
CTA CONSTRUCTION 1432 Main st Suite 204 Waltham, Ma 02451 Phone:617-268-1410 Fax:617-268-2587
TO:
ATTN:
REF:
Bronson Raspuzzi
WE ARE SENDING:
CONTRACT/PO: 2016-02
SUBMITTED FOR:
ACTION TAKEN:
Shop Drawings
Approval
Approved as Submitted
Letter
Your Use
Approved as Noted
Prints
As Requested
Resubmit
Change Order
Review and Comment
Submit
Other:
Returned
Plans
SENT VIA:
Samples
Returned for Corrections
Specifications
Attached
Due Date:
Other: Submittal Package
Separate Cover Via:
Other:
SUBMITTAL
DRAWING
ITEM NO.
COPIES
DATE DESCRIPTION
1
09/01/2016 Impervia Fixed Sash Detailed Product Description
1
09/01/2016 Glazing performance
1
09/01/2016 Color Sign off
1
09/01/2016 Pella Shop Drawings #146161
REMARKS: Note: Certificate of insurance has been requested & will be forwarded to you once received.
Signed: KIM A STACEY
Date:
09/01/2016
PROJECT: RANDOLPH INTERGENERATIONAL COMMUNITY CTR Pella® Impervia® Casement-Fixed Detailed Product Description Frame
Frame is Duracast—five-layer pultruded fiberglass material reinforced with a Pella patented interlocking mat. Overall frame depth is 3-1/4". ® Nominal wall thickness of Duracast fiberglass composite members is .050" to .070" thick. Frame corners are mitered, joined and bonded with corner lock and injected with polyurethane adhesive. Jambs contain factory-drilled installation screw holes on block frame.
Sash Sash is Duracast fiberglass composite — five-layer pultruded fiberglass material, reinforced with a Pella patented interlocking mat. All sash members have mitered corners bonded with corner lock and sealed with injected polyurethane adhesive.
Exterior/Interior Duracast fiberglass composite surfaces with powder-coat paint finish. Color is Brown.
Glazing System Quality float glass complying with ASTM C 1036. 11/16" insulating glass annealed, tempered, or obscure Advanced low-E coated, with argon sealed and bonded to sash.
Weather Stripping Dual weather stripping. Continuous, flexible ThermoPlastic Vulcanizate material in dual durometer design, compressed between frame and sash for positive seal on all four sides. Secondary ThermoPlastic Vulcanizate leaf-type weather strip between edge of sash and frame.
Optional Products Grilles Grilles-Between-the-Glass Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass. Grilles are factory prefinished brown to match interior and exterior finish.
PERFORMANCE REQUIREMENTS
Windows shall meet a rating of [C] [AP] –LC–PG 45-50 specifications in accordance with ANSI/AAMA/NWWDA 101/I.S.2/A440-08. Window Air Leakage, ASTM E 283: Window air leakage when tested at 1.57 psf (25 mph) shall be 0.05 cfm/ft2 of frame or less. Window Water Penetration, ASTM E 547: No water penetration through window when tested under static pressure of 7.5 psf (42 mph) after 4 cycles of 5 minutes each, with water being applied at a rate of 5 gallons per hour per square foot.
GL AZING PERFORMANCE – TOTAL UNIT Fixed Units
Glass (mm)
CR
Gap Fill
VLT %
NFRC Certified Product #
Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
SHGC
Type of Glazing
Performance Values 1 U-Factor
Glass Thickness
CASEMENT
0.46 0.46 0.46 0.46 0.48 0.49 0.27 0.27 0.27 0.27 0.30 0.32 0.27 0.27 0.27 0.27 0.30 0.32 0.24 0.24 0.24 0.24 0.26 0.27 0.28 0.28 0.28 0.28 0.31 0.33
0.64 0.58 0.63 0.57 0.60 0.54 0.30 0.27 0.30 0.27 0.30 0.27 0.23 0.20 0.22 0.20 0.23 0.21 0.30 0.27 0.29 0.27 0.29 0.26 0.56 0.51 0.55 0.50 0.53 0.48
67 60 66 59 65 58 57 51 56 50 55 49 53 47 52 46 51 46 56 50 55 49 54 48 64 57 64 57 63 56
43 43 43 43 41 41 59 59 59 59 55 55 59 59 59 59 55 55 47 47 47 47 42 42 58 58 58 58 54 54
2.5 argon 0.27 0.27 3 argon 0.27 0.27 5 argon 0.29 0.31 2.5 argon 0.26 0.26 3 argon 0.26 0.26 5 argon 0.29 0.31 2.5 argon 0.23 0.23 3 argon 0.23 0.23 5 argon 0.25 0.26 2.5 argon 0.28 0.28 3 argon 0.28 0.28 5 argon 0.30 0.32
0.30 0.27 0.30 0.27 0.30 0.27 0.23 0.20 0.22 0.20 0.23 0.21 0.30 0.27 0.29 0.27 0.29 0.26 0.56 0.51 0.55 0.50 0.53 0.48
57 51 56 50 55 49 53 47 52 46 51 46 56 50 55 49 54 48 64 57 64 57 63 56
59 59 59 59 55 55 59 59 59 59 55 55 47 47 47 47 43 43 58 58 58 58 54 54
Ext. Int.
F I X ED UN ITS 11/16" Clear IG with grilles-between-the-glass 11/16" Clear IG with grilles-between-the-glass 11/16" Clear IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" SunDefense™ IG with grilles-between-the-glass 11/16" SunDefense™ IG with grilles-between-the-glass 11/16" SunDefense™ IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass
U. S. Zone N NC SC
PEL-N-152-00257-00001 PEL-N-152-00258-00001 PEL-N-152-00257-00003 PEL-N-152-00258-00003 PEL-N-152-00261-00001 PEL-N-152-00262-00001 PEL-N-152-00287-00001 PEL-N-152-00288-00001 PEL-N-152-00287-00003 PEL-N-152-00288-00003 PEL-N-152-00291-00001 PEL-N-152-00292-00001 PEL-N-152-00299-00001 PEL-N-152-00300-00001 PEL-N-152-00299-00003 PEL-N-152-00300-00003 PEL-N-152-00303-00001 PEL-N-152-00304-00001 PEL-N-152-00323-00001 PEL-N-152-00324-00001 PEL-N-152-00323-00003 PEL-N-152-00324-00003 PEL-N-152-00327-00001 PEL-N-152-00328-00001 PEL-N-152-00275-00002 PEL-N-152-00276-00002 PEL-N-152-00275-00006 PEL-N-152-00276-00006 PEL-N-152-00279-00002 PEL-N-152-00280-00002
2.5
2.5
air
3
3
air
5
5
air
2.5
2.5 argon
3
3
argon
5
5
argon
2.5
2.5 argon
3
3
argon
5
5
argon
2.5
2.5 argon
3
3
argon
5
5
argon
2.5
2.5 argon
3
3
argon
5
5
argon
Canada 2 ER S
Zone 1
2
3
23 21 23 21
19 17 18 17
26 25 26 25 23 20 36 34 36 33 31 26
F I X ED UN ITS — W ITH FOA M I NSU L ATI O N 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" SunDefense IG with grilles-between-the-glass 11/16" SunDefense IG with grilles-between-the-glass 11/16" SunDefense IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
PEL-N-152-00371-00001 PEL-N-152-00372-00001 PEL-N-152-00371-00003 PEL-N-152-00372-00003 PEL-N-152-00375-00001 PEL-N-152-00376-00001 PEL-N-152-00383-00001 PEL-N-152-00384-00001 PEL-N-152-00383-00003 PEL-N-152-00384-00003 PEL-N-152-00387-00001 PEL-N-152-00388-00001 PEL-N-152-00407-00001 PEL-N-152-00408-00001 PEL-N-152-00407-00003 PEL-N-152-00408-00003 PEL-N-152-00411-00001 PEL-N-152-00412-00001 PEL-N-152-00359-00002 PEL-N-152-00360-00002 PEL-N-152-00359-00006 PEL-N-152-00360-00006 PEL-N-152-00363-00002 PEL-N-152-00364-00002
2.5 3 5 2.5 3 5 2.5 3 5 2.5 3 5
23 21 23 21
20 18 19 18
28 26 27 26 25 22 36 34 36 33 32 27
(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative. For center-glass values, see the Product Performance section. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2016 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
F-CM-4
PROJECT NAME: Randolph Intergenerational Community Center
X______________________________________________________________________ Fiberglass Window Exterior & Interior Color : Pella Brown
Abbreviations
General Notes
ALUM. B.O. CONT. CLR. DTL. DIM. EQ. FHWS. FR.
= = = = = = = = =
ALUMINUM BY OTHERS CONTINUOUS CLEARANCE DETAIL DIMENSION EQUAL FLAT HEAD WOOD SCREW FRAME
Deviations from Architectural Specifications LBS. MAX. MIN. M.O. NA. OC. OPG. OPP.
= = = = = = = =
POUNDS MAXIMUM MINIMUM MASONRY OPENING NOT APPLICABLE ON CENTER OPENING OPPOSITE
REQD. = R.O. = SDS. = SIM. = TOT. FR. = V.G. = VIF. = WO =
T
Pella, Iowa
Pella Corporation
12 6
5
11
4
10
-
D
E
P
A
R
T
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
M
E
N
SUPPORT SERVICES
3
-
9
8 2
7 1
DATE: DATE: REV:
RANDOLPH, MA
REV:
INSTALLATION SHOP DRAWINGS FOR
11/18/13
Deviations from Architectural Drawings
REQUIRED ROUGH OPENING SELF-DRILLING SCREW SIMILAR TOTAL FRAME VISIBLE GLASS VERIFY IN FIELD WINDOW OPENING
Hatch Patterns PLYWOOD
BRICK
STEEL
FOAM SEALANT
GYPSUM
CONCRETE
RIGID INSULATION
SOLID
WOOD
CONCRETE BLOCK
GROUT
BATT INSULATION
= LAMINATED
P
= PANEL
= IMPACT GLAZING
O
= OBSCURE GLAZING
S
= SPANDREL
FIELD MULLION INDICATOR
PARTIAL BLOCKING
SEALANT
-
DETAIL CUT
CONTINUOUS BLOCKING
BACKER ROD
M -.-
MULLION REINFORCEMENT
SPRAY FOAM SEALANT
Components & Cladding Design Pressures
Construction Documents Received THESE DRAWINGS WERE PREPARED FROM THE FOLLOWING INFORMATION
DATED
ARCHITECTURAL PLANS
COMPLETE
1-29-16
SPECIFICATIONS
SECTIONS 085413 & 088000
1-29-16
ADDENDUM
NONE
-
OTHER
NONE
-
FAILURE TO CONFIRM THESE DESIGN PRESSURES BY A LOCAL STRUCTURAL ENGINEER OR BUILDING OFFICIAL MAY RESULT IN INADEQUATE MULLION DESIGN OR SELECTION OF PRODUCTS.
Mullion Reinforcement THIS REINFORCING DESIGN CONSIDERS WIND LOADING ON THE COMBINATION AND DEAD LOAD FOR PELLA PRODUCTS ONLY. MARK #
REINFORCEMENT TYPE
MAX. END LOAD
M3.1
20 GA. 1-3/8x3-5/8 NESTED STEEL STUD (UNPUNCHED)
436 LBS
Special Notes
ORIGINAL: 8-19-16 DRAWN BY: TVS CHECKED BY: JA
Project No.: END CONNECTIONS MUST NOT INTERFERE WITH FRAMES OR SEALANT PLACEMENT. WALL CONSTRUCTION AND END CONNECTIONS MUST BE DESIGNED TO ACCEPT THE LOADS INDICATED. STEEL REINFORCEMENT MUST BE PRIMED & TOP COATED WITH QUALITY PAINT, USE FULL PENETRATION WELDS AT CONNECTIONS.
146161 SHEET:
01
OF
04
ARCHITECT: BH+A
FIELD MULLION
L
LOCATION: RANDOLPH, MA
I
= TEMPERED GLAZING
INSTALLATION SHOP DRAWINGS FOR
T
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
Symbols
20
W6
1
LINE #: 30
QTY
LINE #: 32
QTY
3'-512" FR.
3
4
3
W7
1
LINE #: 35
QTY
NOTE: CUSTOM ATTRIBUTES (IF ANY) WILL BE NOTED UNDER THE ELEVATION LABEL
Line #
Quote No.
Unit ID
Windowset Name
Operation / Venting
Exterior Material Type
Frame Type
Base Frame Depth
Exterior Color
Interior Color
Glazing Type
Glass Strength
11
7720431
W1
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Annealed
Low-E
15
7720431
W2
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
15
7720431
W2
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
20
7720431
W3
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
30
7720431
W5
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
30
7720431
W5
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
32
7720431
W6
Impervia Awning Fixed
Fixed
Duracast(R)
Block
32
7720431
W6
Impervia Awning Fixed
Fixed
Duracast(R)
32
7720431
W6
Impervia Awning Fixed
Fixed
32
7720431
W6
Impervia Awning Fixed
35
7720431
W7
35
7720431
Gas Filled
Grille Application
Grille Bar Profile Width
Grille Interior Color
Grille Exterior Color
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Insulated
Annealed
Obscure Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Annealed
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Annealed
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
W7
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
W8
Impervia Awning Fixed
Low-E
Advanced Low-E Insulating Glass
Insulated Glass Low-E Glass Style Options
6
W8
8
LINE #: 40
QTY
INSTALLATION SHOP DRAWINGS FOR
3'-512" FR.
5
8"
6
T N E M T
-
-
-
-
7
12 6
11 5
10 4
9 3
-
8 2
1
8"
ORIGINAL: 8-19-16 DRAWN BY: TVS
40
7720431
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Argon
No Grille
CHECKED BY: JA
Project No.:
146161 SHEET:
02
OF
04
ARCHITECT: BH+A
8"
3
8"
5
-
DATE: REV:
LOCATE IN ZONE 4 ONLY
LOCATION: RANDOLPH, MA
3
8"
3'-61 4" R.O.
7
Pella, Iowa
1'-1112" FR.
W5
SPECIFICATIONS
1'-1112" FR.
6
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
3
4
5'-1112" FR.
7'-11" TOT. FR.
7'-113 4" R.O.
6
3'-61 4" R.O.
8"
8"
10
5
DATE:
QTY
9
REV:
6
LINE #: 20
5
5'-1112" FR.
W3
5'-1112" FR.
7'-113 4" R.O.
6
M3.1
8"
QTY
3
7
3
LINE #: 15
3
8"
OPP.
8"
QTY
7'-11" TOT. FR.
3
4
7
3
4
LINE #: 11
4'-01 4" R.O.
7'-113 4" R.O.
3'-1112" FR.
5
8"
W2
3'-111 2" FR.
8"
6
3
8"
3
8"
4
1'-1112" FR.
9
3 3
3
W1
3
3
Pella Corporation
8"
4
8"
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
3
8"
4"
8
8"
8" 3
3
3
1
8"
8"
4"
R
3'-1112" FR.
A
3'-51 2" FR.
4'-018" R.O.
P
3'-1112" FR.
112"
E
4'-018" R.O.
3
3'-61 4" R.O.
2
5'-111 2" FR.
6'-01 4" R.O.
5'-111 2" FR.
6'-01 4" R.O.
3
1
5 2
3'-61 4" R.O.
1
3'-1112" FR.
3
3
1
4'-01 4" R.O.
3
8"
2"
3'-512" FR.
3
8"
8"
8"
3
3'-1112" FR.
8"
8"
1
3'-1112" FR.
3
D
7'-1112" TOT. FR.
8"
3
3
7'-11" TOT. FR.
4'-01 4" R.O.
SUPPORT SERVICES
8'-13 4" TOT. R.O.
8'-01 4" R.O.
11/18/13
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
WEEPS TO EXTERIOR. CONTINUOUS SEALANT. TIE IN WITH PERIMETER SEALANT. CONTINUOUS SEALANT. WATER RESISTANT BACKER ROD AND SEALANT. (SEE SEALANT NOTE BELOW)
T N E
WEATHER RESISTIVE BARRIER. WEATHER RESISTIVE BARRIER. FOLD IN AT OPENING JAMBS AND SECURE TO WALL CONSTRUCTION. WEATHER RESISTIVE BARRIER. LAP OVER FLASHING.
1 HEAD
4 HEAD
REF. ARCH. DWG.: H2/A613
-
-
-
12 6
5
10 -
9 -
4
INTERIOR
3
EXTERIOR
8
NOTE: THE DETAILS SHOWN ON THIS SHEET WERE PREPARED BASED ON THE DETAILS SHOWN ON THE ARCHITECTURAL DRAWINGS. THE ARCHITECT AND/OR CONTRACTOR MUST REVIEW THE WALL CONSTRUCTION SPECIFIED FOR THIS PROJECT AND DETERMINE THE APPROPRIATE DETAILS AND FLASHING FOR A WATER MANAGED SYSTEM.
-
ROD & SEALANT
2
ROD & SEALANT
VERIFY FLASHING REQUIREMENTS
-
TM03.27
1
TM03.27
-
SEALANT
SEALANT
7
PELLA WINDOW AND DOOR INSTALLATION SEALANT OR EQUIVALENT ASTM C920 CLASS 25, AAMA 803.3 AND AAMA 808.3 QUALIFIED SEALANT
INSTALLATION CLIP
DATE:
AC14.01
INSTALLATION CLIP
REV:
AC14.01
DATE:
ROD & SEALANT
SEALANT NOTE
TM03.27 ROD & SEALANT
REV:
TM03.27
FR.
R.O.
FR.
R.O.
FR.
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
TM03.16 TM03.18 TM03.27 TM07.01 TM07.02 TM07.03
11
CLR
CLR
TM02.09 THRU-WALL SILL FLASHING. SEAL TO WALL CONSTRUCTION BELOW UNIT INSTALLATION FIN. PROVIDE
Pella, Iowa
TM : THERMAL AND MOISTURE PROTECTION
Pella Corporation
BC05.09
OPENING JAMB AND AT WINDOW MULLION AS REQUIRED. FOR VINYL WINDOWS, ADD SHIMS SO MAXIMUM SPACING IS 18". SHIM AND PLUMB UNITS AS PER INSTALLATION INSTRUCTIONS. (DO NOT OVER SHIM)
-
FR.
BC05.02 LEVEL OPENING SILL PRIOR TO UNIT INSTALLATION. PROVIDE IMPERVIOUS SHIMS 1/2" FROM EACH
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
BC : BUILDING COMPONENTS (BY OTHERS)
-
ANCHOR TO L ANGLE WITH #8 x 1/2" SELF-DRILLING STAINLESS SCREWS
M
ANCHOR (2 PER CLIP) TO WALL CONSTRUCTION
AC14.02 INSTALLATION CLIP. FIELD CUT AND BEND AS REQUIRED. SPACE 6" FROM EACH EDGE AND 16" ON CENTER.
T
ROUGH OPENING SILL EXTENDING 6" UP EACH JAMB AND OVERLAP TO EXTERIOR AS PER DETAIL.
AC14.01 INSTALLATION CLIP. FIELD CUT AND BEND AS REQUIRED. SPACE 6" FROM EACH EDGE AND 16" ON CENTER.
R
AC03.04 PELLA SMARTFLASH FOIL BACKED, BUTYL WINDOW AND DOOR FLASHING TAPE (OR EQUAL). APPLY OVER
A
AC : ATTACHMENT COMPONENTS
P
WEATHER BARRIER
11/18/13
E
WEATHER BARRIER
DETAIL KEYNOTES
D
TM07.03
SUPPORT SERVICES
TM07.03
7 FACTORY MULLION
REF. ARCH. DWG.: H1/A613
REF. ARCH. DWG.: -
TM07.02 3
4"
WEATHER BARRIER
TM07.02 WEATHER BARRIER
3
TM03.27
IP5
AC14.01
ROD & SEALANT
INSTALLATION CLIP
FR.
SHIMS
SHIMS
Note
N U G
Plug accessory groove at all window corners with sealant in conjunction with the application of the interior perimeter sealant.
BC05.09
BC05.09
PROVIDE FLASHING @ HEAD OF MULLION.
CONFIRM SETBACK
31 4"
CONFIRM SETBACK
3"
REQUIREMENTS
Note:
3"
REFER TO PELLA IMPERVIA COMBINATION ASSEMBLY USING 1 2" MULLION REINFORCEMENT INSTRUCTIONS
REQUIREMENTS
2 JAMB
5 JAMB
REF. ARCH. DWG.: J2/A613
4"
BC05.02
SHIMS
SHIMS 1
INSTALLATION CLIP
MIN.
REF. ARCH. DWG.: -
BC05.02 AC14.02 CAUTION: DO NOT SEAL @ WEEP VENT LOCATIONS.
TM03.27 ROD & SEALANT
TYPICAL INTERIOR CORNER SEALANT DETAIL
8 FACTORY MULLION
REF. ARCH. DWG.: J1/A613
1
CAUTION: DO NOT SEAL @ WEEP VENT LOCATIONS.
31 4"
1
AC14.02
4"
MIN.
BC05.02 SHIMS
TM03.27 TM03.27
ROD & SEALANT
ROD & SEALANT
AC03.04
AC03.04
FLASHING TAPE
FLASHING TAPE
TM03.16
SEALANT
4"
MIN.
INSTALLATION CLIP
SEALANT
AC14.02
TM03.16
SEALANT
INSTALLATION CLIP
SLOPE
FR.
TM03.27 ROD & SEALANT
x 1" x 1" ALUMINUM "L" ANGLE SILL DAM (BY OTHERS). ATTACH TO OPENING 3" FROM ENDS AND 12" ON CENTER WITH #10 x 1-1/2" STAINLESS STEEL PAN HEAD SCREWS.
TM03.18
TM03.18
SEALANT
SEALANT
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
1 16"
x 1" x 1" ALUMINUM "L" ANGLE SILL DAM (BY OTHERS). ATTACH TO OPENING 3" FROM ENDS AND 12" ON CENTER WITH #10 x 1-1/2" STAINLESS STEEL PAN HEAD SCREWS.
1 16"
TM07.02 WEATHER BARRIER
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
CLR
CLR
ROD & SEALANT
x 1" x 1" ALUMINUM "L" ANGLE SILL DAM (BY OTHERS). ATTACH TO OPENING 3" FROM ENDS AND 12" ON CENTER WITH #10 x 1-1/2" STAINLESS STEEL PAN HEAD SCREWS.
CLR
TM03.27
FLASHING TAPE
1 16"
R.O.
FR.
R.O.
FLASHING TAPE
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
FR.
R.O.
TM03.27
AC14.01
ROD & SEALANT
INSTALLATION CLIP
SEALANT
TM03.27
TM03.18
ROD & SEALANT
ROD & SEALANT
BC05.09
TM03.16
SHIMS
ROD & SEALANT
INSTALLATION SHOP DRAWINGS FOR
SEALANT
LOCATION: RANDOLPH, MA
ROD & SEALANT
LK AU C
SEALANT
ROD & SEALANT
ORIGINAL: 8-19-16
CONFIRM SETBACK
TM02.09 FLASHING B.O.
TM07.01
31 4"
DRAWN BY: TVS
3"
REQUIREMENTS
WEATHER BARRIER
CHECKED BY: JA
Project No.:
TM07.01
146161
WEATHER BARRIER
3
SILL REF. ARCH. DWG.: S2/A613
6
SILL REF. ARCH. DWG.: S1/A613
9
JAMB REF. ARCH. DWG.: 16/A613
SD SILL
SHEET:
03
OF
04
ARCHITECT: BH+A
TM03.27
TM03.27
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
SEALANT
R.O.
FR.
INSTALLATION CLIP
GRILLE SECTION
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
AC14.01
ROD & SEALANT
GBG GRILLE
FR.
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
TM03.27 R.O.
CLR
CLR
SEE ELEV
FR.
G1
4"
CC : MULLION COVERS
UNPUNCHED STEEL STUD - AS PER SCHEDULE
CC01.01
CC01.01 ALUMINUM MULLION COVER. SEE TYPICAL DETAIL T1. SEAL TO WALL CONSTRUCTION AT HEAD AND JAMBS. DO NOT SEAL VERTICAL MULLION COVERS AT SILL TO ALLOW FOR DRAINAGE OF INCIDENTAL MOISTURE.
MULLION COVER
CLR
TM : THERMAL AND MOISTURE PROTECTION
ATTACH NESTED TRACK TO STUD USING MIN. #8 SDS, 6" FROM ENDS & 12" O.C.
CLR
T N E
SEALANT NOTE PELLA WINDOW AND DOOR INSTALLATION SEALANT OR EQUIVALENT ASTM C920 CLASS 25, AAMA 803.3 AND AAMA 808.3 QUALIFIED SEALANT
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
12
10
9
8
7
-
5
-
-
-
4
TM03.27
-
CONCRETE/ CMU: 3 - 3 16" X 1 3 8" EMBEDMENT TAPCONS
-
INSTALLATION CLIP
1
STEEL: 2 - #10 SDS DATE:
6
3
WOOD: 5 - #10 X 3" WOOD SCREWS
ROD & SEALANT
2
AC14.01
USE 1 2" TRACK SEGMENT AS BRACE CLIP WHEN NO TRACK EXISTS. ATTACH TO SILL / HEAD AS NOTED. INSERT NESTED STUD AND SCREW THROUGH WITH MIN. #8 SDS.
DATE:
NOTE: THE DETAILS SHOWN ON THIS SHEET WERE PREPARED BASED ON THE DETAILS SHOWN ON THE ARCHITECTURAL DRAWINGS. THE ARCHITECT AND/OR CONTRACTOR MUST REVIEW THE WALL CONSTRUCTION SPECIFIED FOR THIS PROJECT AND DETERMINE THE APPROPRIATE DETAILS AND FLASHING FOR A WATER MANAGED SYSTEM.
1
REV:
FR.
ROD & SEALANT
REV:
VERIFY FLASHING REQUIREMENTS
TM03.01 R.O.
M
BC03.03 WOOD BLOCKING
-
SEE ELEVATION
TM03.01 WATER RESISTANT BACKER ROD AND SEALANT. TM03.27 WATER RESISTANT BACKER ROD AND SEALANT. (SEE SEALANT NOTE BELOW)
Pella, Iowa
FLASHING TAPE
BC03.03 WOOD BLOCKING. HOLD FLUSH AT WINDOW FRAME. ANCHOR TO MULLION. BC05.09 SHIM AND PLUMB UNITS AS PER INSTALLATION INSTRUCTIONS. (DO NOT OVER SHIM)
Pella Corporation
AC03.01
11
FR.
R.O.
NEST STUD W/ TRACK OF SAME GAUGE MATERIAL (OR MAX. 12 GA.).
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
BC : BUILDING COMPONENTS (BY OTHERS)
SHIM
T
BC05.09
R
AC14.01
OVER MULLION STRUCTURE EXTENDING 6" ONTO ADJACENT STRUCTURE. PROVIDE WATERSHED OVERLAPS AT ENDS. INSTALLATION CLIP. FIELD CUT AND BEND AS REQUIRED. SPACE 6" FROM EACH EDGE AND 16" ON CENTER. ANCHOR (2 PER CLIP) TO WALL CONSTRUCTION
A
AC03.01 PELLA SMARTFLASH FOIL BACKED, BUTYL WINDOW AND DOOR FLASHING TAPE #850H (OR EQUAL). APPLY
P
AC : ATTACHMENT COMPONENTS
E
PROVIDE FLASHING @ HEAD OF MULLION.
11/18/13
D
Note
SUPPORT SERVICES
DETAIL KEYNOTES
10 VERTICAL MULLION REF. ARCH. DWG.: -
REV 1
CHG
SHT
REVISIONS PROFILE ADJUSTMENTS
CO
DWN
ENG
DATE 6/8/2016
NOTES 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE GIVEN IN INCHES.
597 LBS. MAXIMUM ENDLOAD
2. THE FOLLOWING SYMBOLS INDICATE CRITICAL OR KEY DIMENSIONS. REFER TO DOCUMENT PDS688 AND PELLA SUPPLIER QUALITY MANUAL FOR USAGE INFORMATION. [C] INDICATES CRITICAL DIMENSIONS [K] INDICATES KEY DIMENSIONS 3. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ON THIS DRAWING HAVE BEEN TOLERANCED ACCORDING TO THE ALUMINUM ASSOCIATION TOLERANCE STANDARD FOR ALUMINUM EXTRUSIONS. 4. THE FOLLOWING LINEAL MEASUREMENT ATTRIBUTES MUST BE MAINTAINED: MAX BOW = 0.015 PER FT. MAX CAMBER = 0.015 PER FT. MAX TWIST = 1.0° PER FT.
PLAN DTL.
(END CONNECTION DESIGN FOR WINDLOADS ONLY. SHIMS MUST BE USED TO SUPPORT HORIZONTAL REINFORCEMENT.)
NESTED STEEL STUD END CONNECTION
5. MATERIAL THICKNESS TO BE 0.070 ± 0.006 UNLESS OTHERWISE SHOWN. 6. ALL RADII TO BE 0.015 UNLESS OTHERWISE SHOWN.
1.6356
1.4273 3.4839
FIELD VERIFY ALL DIMENSIONS PRIOR TO ORDERING
M1 IC1
TYPICAL SPACING OF INSTALLATION CLIP AND FRAME SCREWS AT SILL B
B
A
Single unit
B
B
A
A
B
B
A
B
B
A
A
INSTALLATION SHOP DRAWINGS FOR
A
B
B
B
A
A
ORIGINAL: 8-19-16
B
DRAWN BY: TVS
A
CHECKED BY: JA
Project No.: 2-wide Combination
IMPERVIA® CLIP INSTALLATION TYPICAL DETAILS TYPICAL DETAILS APPLY UNLESS OTHERWISE SPECIFIED
146161 SHEET:
04
OF
04
ARCHITECT: BH+A
0.5180
LOCATION: RANDOLPH, MA
4.000° 0.2764
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
3.8262
Pella Windows & Doors Inc. COMMERCIAL DIVISION 45 Fondi Rd. Haverhill,MA 01832
Phone: 978-521-7100 Fax: 978-373-8084
PROJECT: Randolph Intergenerational Com impervia fixed casements
DATE: 09/01/2016
CTA CONSTRUCTION 1432 Main st Suite 204 Waltham, Ma 02451 Phone:617-268-1410 Fax:617-268-2587
TO:
ATTN:
REF:
Bronson Raspuzzi
WE ARE SENDING:
CONTRACT/PO: 2016-02
SUBMITTED FOR:
ACTION TAKEN:
Shop Drawings
Approval
Approved as Submitted
Letter
Your Use
Approved as Noted
Prints
As Requested
Resubmit
Change Order
Review and Comment
Submit
Other:
Returned
Plans
SENT VIA:
Samples
Returned for Corrections
Specifications
Attached
Due Date:
Other: Submittal Package
Separate Cover Via:
Other:
SUBMITTAL
DRAWING
ITEM NO.
COPIES
DATE DESCRIPTION
1
09/01/2016 Impervia Fixed Sash Detailed Product Description
1
09/01/2016 Glazing performance
1
09/01/2016 Color Sign off
1
09/01/2016 Pella Shop Drawings #146161
REMARKS: Note: Certificate of insurance has been requested & will be forwarded to you once received.
Signed: KIM A STACEY
Date:
09/01/2016
PROJECT: RANDOLPH INTERGENERATIONAL COMMUNITY CTR Pella® Impervia® Casement-Fixed Detailed Product Description Frame
Frame is Duracast—five-layer pultruded fiberglass material reinforced with a Pella patented interlocking mat. Overall frame depth is 3-1/4". ® Nominal wall thickness of Duracast fiberglass composite members is .050" to .070" thick. Frame corners are mitered, joined and bonded with corner lock and injected with polyurethane adhesive. Jambs contain factory-drilled installation screw holes on block frame.
Sash Sash is Duracast fiberglass composite — five-layer pultruded fiberglass material, reinforced with a Pella patented interlocking mat. All sash members have mitered corners bonded with corner lock and sealed with injected polyurethane adhesive.
Exterior/Interior Duracast fiberglass composite surfaces with powder-coat paint finish. Color is Brown.
Glazing System Quality float glass complying with ASTM C 1036. 11/16" insulating glass annealed, tempered, or obscure Advanced low-E coated, with argon sealed and bonded to sash.
Weather Stripping Dual weather stripping. Continuous, flexible ThermoPlastic Vulcanizate material in dual durometer design, compressed between frame and sash for positive seal on all four sides. Secondary ThermoPlastic Vulcanizate leaf-type weather strip between edge of sash and frame.
Optional Products Grilles Grilles-Between-the-Glass Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass. Grilles are factory prefinished brown to match interior and exterior finish.
PERFORMANCE REQUIREMENTS
Windows shall meet a rating of [C] [AP] –LC–PG 45-50 specifications in accordance with ANSI/AAMA/NWWDA 101/I.S.2/A440-08. Window Air Leakage, ASTM E 283: Window air leakage when tested at 1.57 psf (25 mph) shall be 0.05 cfm/ft2 of frame or less. Window Water Penetration, ASTM E 547: No water penetration through window when tested under static pressure of 7.5 psf (42 mph) after 4 cycles of 5 minutes each, with water being applied at a rate of 5 gallons per hour per square foot.
GL AZING PERFORMANCE – TOTAL UNIT Fixed Units
Glass (mm)
CR
Gap Fill
VLT %
NFRC Certified Product #
Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
SHGC
Type of Glazing
Performance Values 1 U-Factor
Glass Thickness
CASEMENT
0.46 0.46 0.46 0.46 0.48 0.49 0.27 0.27 0.27 0.27 0.30 0.32 0.27 0.27 0.27 0.27 0.30 0.32 0.24 0.24 0.24 0.24 0.26 0.27 0.28 0.28 0.28 0.28 0.31 0.33
0.64 0.58 0.63 0.57 0.60 0.54 0.30 0.27 0.30 0.27 0.30 0.27 0.23 0.20 0.22 0.20 0.23 0.21 0.30 0.27 0.29 0.27 0.29 0.26 0.56 0.51 0.55 0.50 0.53 0.48
67 60 66 59 65 58 57 51 56 50 55 49 53 47 52 46 51 46 56 50 55 49 54 48 64 57 64 57 63 56
43 43 43 43 41 41 59 59 59 59 55 55 59 59 59 59 55 55 47 47 47 47 42 42 58 58 58 58 54 54
2.5 argon 0.27 0.27 3 argon 0.27 0.27 5 argon 0.29 0.31 2.5 argon 0.26 0.26 3 argon 0.26 0.26 5 argon 0.29 0.31 2.5 argon 0.23 0.23 3 argon 0.23 0.23 5 argon 0.25 0.26 2.5 argon 0.28 0.28 3 argon 0.28 0.28 5 argon 0.30 0.32
0.30 0.27 0.30 0.27 0.30 0.27 0.23 0.20 0.22 0.20 0.23 0.21 0.30 0.27 0.29 0.27 0.29 0.26 0.56 0.51 0.55 0.50 0.53 0.48
57 51 56 50 55 49 53 47 52 46 51 46 56 50 55 49 54 48 64 57 64 57 63 56
59 59 59 59 55 55 59 59 59 59 55 55 47 47 47 47 43 43 58 58 58 58 54 54
Ext. Int.
F I X ED UN ITS 11/16" Clear IG with grilles-between-the-glass 11/16" Clear IG with grilles-between-the-glass 11/16" Clear IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" SunDefense™ IG with grilles-between-the-glass 11/16" SunDefense™ IG with grilles-between-the-glass 11/16" SunDefense™ IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass
U. S. Zone N NC SC
PEL-N-152-00257-00001 PEL-N-152-00258-00001 PEL-N-152-00257-00003 PEL-N-152-00258-00003 PEL-N-152-00261-00001 PEL-N-152-00262-00001 PEL-N-152-00287-00001 PEL-N-152-00288-00001 PEL-N-152-00287-00003 PEL-N-152-00288-00003 PEL-N-152-00291-00001 PEL-N-152-00292-00001 PEL-N-152-00299-00001 PEL-N-152-00300-00001 PEL-N-152-00299-00003 PEL-N-152-00300-00003 PEL-N-152-00303-00001 PEL-N-152-00304-00001 PEL-N-152-00323-00001 PEL-N-152-00324-00001 PEL-N-152-00323-00003 PEL-N-152-00324-00003 PEL-N-152-00327-00001 PEL-N-152-00328-00001 PEL-N-152-00275-00002 PEL-N-152-00276-00002 PEL-N-152-00275-00006 PEL-N-152-00276-00006 PEL-N-152-00279-00002 PEL-N-152-00280-00002
2.5
2.5
air
3
3
air
5
5
air
2.5
2.5 argon
3
3
argon
5
5
argon
2.5
2.5 argon
3
3
argon
5
5
argon
2.5
2.5 argon
3
3
argon
5
5
argon
2.5
2.5 argon
3
3
argon
5
5
argon
Canada 2 ER S
Zone 1
2
3
23 21 23 21
19 17 18 17
26 25 26 25 23 20 36 34 36 33 31 26
F I X ED UN ITS — W ITH FOA M I NSU L ATI O N 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" Advanced Low-E IG with grilles-between-the-glass 11/16" SunDefense IG with grilles-between-the-glass 11/16" SunDefense IG with grilles-between-the-glass 11/16" SunDefense IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" AdvancedComfort Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass 11/16" NaturalSun Low-E IG with grilles-between-the-glass R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
PEL-N-152-00371-00001 PEL-N-152-00372-00001 PEL-N-152-00371-00003 PEL-N-152-00372-00003 PEL-N-152-00375-00001 PEL-N-152-00376-00001 PEL-N-152-00383-00001 PEL-N-152-00384-00001 PEL-N-152-00383-00003 PEL-N-152-00384-00003 PEL-N-152-00387-00001 PEL-N-152-00388-00001 PEL-N-152-00407-00001 PEL-N-152-00408-00001 PEL-N-152-00407-00003 PEL-N-152-00408-00003 PEL-N-152-00411-00001 PEL-N-152-00412-00001 PEL-N-152-00359-00002 PEL-N-152-00360-00002 PEL-N-152-00359-00006 PEL-N-152-00360-00006 PEL-N-152-00363-00002 PEL-N-152-00364-00002
2.5 3 5 2.5 3 5 2.5 3 5 2.5 3 5
23 21 23 21
20 18 19 18
28 26 27 26 25 22 36 34 36 33 32 27
(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative. For center-glass values, see the Product Performance section. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2016 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
F-CM-4
PROJECT NAME: Randolph Intergenerational Community Center
X______________________________________________________________________ Fiberglass Window Exterior & Interior Color : Pella Brown
Abbreviations
General Notes
ALUM. B.O. CONT. CLR. DTL. DIM. EQ. FHWS. FR.
= = = = = = = = =
ALUMINUM BY OTHERS CONTINUOUS CLEARANCE DETAIL DIMENSION EQUAL FLAT HEAD WOOD SCREW FRAME
Deviations from Architectural Specifications LBS. MAX. MIN. M.O. NA. OC. OPG. OPP.
= = = = = = = =
POUNDS MAXIMUM MINIMUM MASONRY OPENING NOT APPLICABLE ON CENTER OPENING OPPOSITE
REQD. = R.O. = SDS. = SIM. = TOT. FR. = V.G. = VIF. = WO =
T
Pella, Iowa
Pella Corporation
12 6
5
11
4
10
-
D
E
P
A
R
T
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
M
E
N
SUPPORT SERVICES
3
-
9
8 2
7 1
DATE: DATE: REV:
RANDOLPH, MA
REV:
INSTALLATION SHOP DRAWINGS FOR
11/18/13
Deviations from Architectural Drawings
REQUIRED ROUGH OPENING SELF-DRILLING SCREW SIMILAR TOTAL FRAME VISIBLE GLASS VERIFY IN FIELD WINDOW OPENING
Hatch Patterns PLYWOOD
BRICK
STEEL
FOAM SEALANT
GYPSUM
CONCRETE
RIGID INSULATION
SOLID
WOOD
CONCRETE BLOCK
GROUT
BATT INSULATION
= LAMINATED
P
= PANEL
= IMPACT GLAZING
O
= OBSCURE GLAZING
S
= SPANDREL
FIELD MULLION INDICATOR
PARTIAL BLOCKING
SEALANT
-
DETAIL CUT
CONTINUOUS BLOCKING
BACKER ROD
M -.-
MULLION REINFORCEMENT
SPRAY FOAM SEALANT
Components & Cladding Design Pressures
Construction Documents Received THESE DRAWINGS WERE PREPARED FROM THE FOLLOWING INFORMATION
DATED
ARCHITECTURAL PLANS
COMPLETE
1-29-16
SPECIFICATIONS
SECTIONS 085413 & 088000
1-29-16
ADDENDUM
NONE
-
OTHER
NONE
-
FAILURE TO CONFIRM THESE DESIGN PRESSURES BY A LOCAL STRUCTURAL ENGINEER OR BUILDING OFFICIAL MAY RESULT IN INADEQUATE MULLION DESIGN OR SELECTION OF PRODUCTS.
Mullion Reinforcement THIS REINFORCING DESIGN CONSIDERS WIND LOADING ON THE COMBINATION AND DEAD LOAD FOR PELLA PRODUCTS ONLY. MARK #
REINFORCEMENT TYPE
MAX. END LOAD
M3.1
20 GA. 1-3/8x3-5/8 NESTED STEEL STUD (UNPUNCHED)
436 LBS
Special Notes
ORIGINAL: 8-19-16 DRAWN BY: TVS CHECKED BY: JA
Project No.: END CONNECTIONS MUST NOT INTERFERE WITH FRAMES OR SEALANT PLACEMENT. WALL CONSTRUCTION AND END CONNECTIONS MUST BE DESIGNED TO ACCEPT THE LOADS INDICATED. STEEL REINFORCEMENT MUST BE PRIMED & TOP COATED WITH QUALITY PAINT, USE FULL PENETRATION WELDS AT CONNECTIONS.
146161 SHEET:
01
OF
04
ARCHITECT: BH+A
FIELD MULLION
L
LOCATION: RANDOLPH, MA
I
= TEMPERED GLAZING
INSTALLATION SHOP DRAWINGS FOR
T
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
Symbols
20
W6
1
LINE #: 30
QTY
LINE #: 32
QTY
3'-512" FR.
3
4
3
W7
1
LINE #: 35
QTY
NOTE: CUSTOM ATTRIBUTES (IF ANY) WILL BE NOTED UNDER THE ELEVATION LABEL
Line #
Quote No.
Unit ID
Windowset Name
Operation / Venting
Exterior Material Type
Frame Type
Base Frame Depth
Exterior Color
Interior Color
Glazing Type
Glass Strength
11
7720431
W1
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Annealed
Low-E
15
7720431
W2
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
15
7720431
W2
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
20
7720431
W3
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
30
7720431
W5
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
30
7720431
W5
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
32
7720431
W6
Impervia Awning Fixed
Fixed
Duracast(R)
Block
32
7720431
W6
Impervia Awning Fixed
Fixed
Duracast(R)
32
7720431
W6
Impervia Awning Fixed
Fixed
32
7720431
W6
Impervia Awning Fixed
35
7720431
W7
35
7720431
Gas Filled
Grille Application
Grille Bar Profile Width
Grille Interior Color
Grille Exterior Color
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Insulated
Annealed
Obscure Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Annealed
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Annealed
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
Grilles-BetweenThe-Glass
3/4" Contour
Brown
Brown
W7
Impervia Awning Fixed
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Low-E
Advanced Low-E Insulating Glass
Argon
No Grille
W8
Impervia Awning Fixed
Low-E
Advanced Low-E Insulating Glass
Insulated Glass Low-E Glass Style Options
6
W8
8
LINE #: 40
QTY
INSTALLATION SHOP DRAWINGS FOR
3'-512" FR.
5
8"
6
T N E M T
-
-
-
-
7
12 6
11 5
10 4
9 3
-
8 2
1
8"
ORIGINAL: 8-19-16 DRAWN BY: TVS
40
7720431
Fixed
Duracast(R)
Block
3 1/4"
Brown
Brown
Insulated
Tempered
Argon
No Grille
CHECKED BY: JA
Project No.:
146161 SHEET:
02
OF
04
ARCHITECT: BH+A
8"
3
8"
5
-
DATE: REV:
LOCATE IN ZONE 4 ONLY
LOCATION: RANDOLPH, MA
3
8"
3'-61 4" R.O.
7
Pella, Iowa
1'-1112" FR.
W5
SPECIFICATIONS
1'-1112" FR.
6
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
3
4
5'-1112" FR.
7'-11" TOT. FR.
7'-113 4" R.O.
6
3'-61 4" R.O.
8"
8"
10
5
DATE:
QTY
9
REV:
6
LINE #: 20
5
5'-1112" FR.
W3
5'-1112" FR.
7'-113 4" R.O.
6
M3.1
8"
QTY
3
7
3
LINE #: 15
3
8"
OPP.
8"
QTY
7'-11" TOT. FR.
3
4
7
3
4
LINE #: 11
4'-01 4" R.O.
7'-113 4" R.O.
3'-1112" FR.
5
8"
W2
3'-111 2" FR.
8"
6
3
8"
3
8"
4
1'-1112" FR.
9
3 3
3
W1
3
3
Pella Corporation
8"
4
8"
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
3
8"
4"
8
8"
8" 3
3
3
1
8"
8"
4"
R
3'-1112" FR.
A
3'-51 2" FR.
4'-018" R.O.
P
3'-1112" FR.
112"
E
4'-018" R.O.
3
3'-61 4" R.O.
2
5'-111 2" FR.
6'-01 4" R.O.
5'-111 2" FR.
6'-01 4" R.O.
3
1
5 2
3'-61 4" R.O.
1
3'-1112" FR.
3
3
1
4'-01 4" R.O.
3
8"
2"
3'-512" FR.
3
8"
8"
8"
3
3'-1112" FR.
8"
8"
1
3'-1112" FR.
3
D
7'-1112" TOT. FR.
8"
3
3
7'-11" TOT. FR.
4'-01 4" R.O.
SUPPORT SERVICES
8'-13 4" TOT. R.O.
8'-01 4" R.O.
11/18/13
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
WEEPS TO EXTERIOR. CONTINUOUS SEALANT. TIE IN WITH PERIMETER SEALANT. CONTINUOUS SEALANT. WATER RESISTANT BACKER ROD AND SEALANT. (SEE SEALANT NOTE BELOW)
T N E
WEATHER RESISTIVE BARRIER. WEATHER RESISTIVE BARRIER. FOLD IN AT OPENING JAMBS AND SECURE TO WALL CONSTRUCTION. WEATHER RESISTIVE BARRIER. LAP OVER FLASHING.
1 HEAD
4 HEAD
REF. ARCH. DWG.: H2/A613
-
-
-
12 6
5
10 -
9 -
4
INTERIOR
3
EXTERIOR
8
NOTE: THE DETAILS SHOWN ON THIS SHEET WERE PREPARED BASED ON THE DETAILS SHOWN ON THE ARCHITECTURAL DRAWINGS. THE ARCHITECT AND/OR CONTRACTOR MUST REVIEW THE WALL CONSTRUCTION SPECIFIED FOR THIS PROJECT AND DETERMINE THE APPROPRIATE DETAILS AND FLASHING FOR A WATER MANAGED SYSTEM.
-
ROD & SEALANT
2
ROD & SEALANT
VERIFY FLASHING REQUIREMENTS
-
TM03.27
1
TM03.27
-
SEALANT
SEALANT
7
PELLA WINDOW AND DOOR INSTALLATION SEALANT OR EQUIVALENT ASTM C920 CLASS 25, AAMA 803.3 AND AAMA 808.3 QUALIFIED SEALANT
INSTALLATION CLIP
DATE:
AC14.01
INSTALLATION CLIP
REV:
AC14.01
DATE:
ROD & SEALANT
SEALANT NOTE
TM03.27 ROD & SEALANT
REV:
TM03.27
FR.
R.O.
FR.
R.O.
FR.
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
TM03.16 TM03.18 TM03.27 TM07.01 TM07.02 TM07.03
11
CLR
CLR
TM02.09 THRU-WALL SILL FLASHING. SEAL TO WALL CONSTRUCTION BELOW UNIT INSTALLATION FIN. PROVIDE
Pella, Iowa
TM : THERMAL AND MOISTURE PROTECTION
Pella Corporation
BC05.09
OPENING JAMB AND AT WINDOW MULLION AS REQUIRED. FOR VINYL WINDOWS, ADD SHIMS SO MAXIMUM SPACING IS 18". SHIM AND PLUMB UNITS AS PER INSTALLATION INSTRUCTIONS. (DO NOT OVER SHIM)
-
FR.
BC05.02 LEVEL OPENING SILL PRIOR TO UNIT INSTALLATION. PROVIDE IMPERVIOUS SHIMS 1/2" FROM EACH
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
BC : BUILDING COMPONENTS (BY OTHERS)
-
ANCHOR TO L ANGLE WITH #8 x 1/2" SELF-DRILLING STAINLESS SCREWS
M
ANCHOR (2 PER CLIP) TO WALL CONSTRUCTION
AC14.02 INSTALLATION CLIP. FIELD CUT AND BEND AS REQUIRED. SPACE 6" FROM EACH EDGE AND 16" ON CENTER.
T
ROUGH OPENING SILL EXTENDING 6" UP EACH JAMB AND OVERLAP TO EXTERIOR AS PER DETAIL.
AC14.01 INSTALLATION CLIP. FIELD CUT AND BEND AS REQUIRED. SPACE 6" FROM EACH EDGE AND 16" ON CENTER.
R
AC03.04 PELLA SMARTFLASH FOIL BACKED, BUTYL WINDOW AND DOOR FLASHING TAPE (OR EQUAL). APPLY OVER
A
AC : ATTACHMENT COMPONENTS
P
WEATHER BARRIER
11/18/13
E
WEATHER BARRIER
DETAIL KEYNOTES
D
TM07.03
SUPPORT SERVICES
TM07.03
7 FACTORY MULLION
REF. ARCH. DWG.: H1/A613
REF. ARCH. DWG.: -
TM07.02 3
4"
WEATHER BARRIER
TM07.02 WEATHER BARRIER
3
TM03.27
IP5
AC14.01
ROD & SEALANT
INSTALLATION CLIP
FR.
SHIMS
SHIMS
Note
N U G
Plug accessory groove at all window corners with sealant in conjunction with the application of the interior perimeter sealant.
BC05.09
BC05.09
PROVIDE FLASHING @ HEAD OF MULLION.
CONFIRM SETBACK
31 4"
CONFIRM SETBACK
3"
REQUIREMENTS
Note:
3"
REFER TO PELLA IMPERVIA COMBINATION ASSEMBLY USING 1 2" MULLION REINFORCEMENT INSTRUCTIONS
REQUIREMENTS
2 JAMB
5 JAMB
REF. ARCH. DWG.: J2/A613
4"
BC05.02
SHIMS
SHIMS 1
INSTALLATION CLIP
MIN.
REF. ARCH. DWG.: -
BC05.02 AC14.02 CAUTION: DO NOT SEAL @ WEEP VENT LOCATIONS.
TM03.27 ROD & SEALANT
TYPICAL INTERIOR CORNER SEALANT DETAIL
8 FACTORY MULLION
REF. ARCH. DWG.: J1/A613
1
CAUTION: DO NOT SEAL @ WEEP VENT LOCATIONS.
31 4"
1
AC14.02
4"
MIN.
BC05.02 SHIMS
TM03.27 TM03.27
ROD & SEALANT
ROD & SEALANT
AC03.04
AC03.04
FLASHING TAPE
FLASHING TAPE
TM03.16
SEALANT
4"
MIN.
INSTALLATION CLIP
SEALANT
AC14.02
TM03.16
SEALANT
INSTALLATION CLIP
SLOPE
FR.
TM03.27 ROD & SEALANT
x 1" x 1" ALUMINUM "L" ANGLE SILL DAM (BY OTHERS). ATTACH TO OPENING 3" FROM ENDS AND 12" ON CENTER WITH #10 x 1-1/2" STAINLESS STEEL PAN HEAD SCREWS.
TM03.18
TM03.18
SEALANT
SEALANT
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
1 16"
x 1" x 1" ALUMINUM "L" ANGLE SILL DAM (BY OTHERS). ATTACH TO OPENING 3" FROM ENDS AND 12" ON CENTER WITH #10 x 1-1/2" STAINLESS STEEL PAN HEAD SCREWS.
1 16"
TM07.02 WEATHER BARRIER
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
CLR
CLR
ROD & SEALANT
x 1" x 1" ALUMINUM "L" ANGLE SILL DAM (BY OTHERS). ATTACH TO OPENING 3" FROM ENDS AND 12" ON CENTER WITH #10 x 1-1/2" STAINLESS STEEL PAN HEAD SCREWS.
CLR
TM03.27
FLASHING TAPE
1 16"
R.O.
FR.
R.O.
FLASHING TAPE
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
FR.
R.O.
TM03.27
AC14.01
ROD & SEALANT
INSTALLATION CLIP
SEALANT
TM03.27
TM03.18
ROD & SEALANT
ROD & SEALANT
BC05.09
TM03.16
SHIMS
ROD & SEALANT
INSTALLATION SHOP DRAWINGS FOR
SEALANT
LOCATION: RANDOLPH, MA
ROD & SEALANT
LK AU C
SEALANT
ROD & SEALANT
ORIGINAL: 8-19-16
CONFIRM SETBACK
TM02.09 FLASHING B.O.
TM07.01
31 4"
DRAWN BY: TVS
3"
REQUIREMENTS
WEATHER BARRIER
CHECKED BY: JA
Project No.:
TM07.01
146161
WEATHER BARRIER
3
SILL REF. ARCH. DWG.: S2/A613
6
SILL REF. ARCH. DWG.: S1/A613
9
JAMB REF. ARCH. DWG.: 16/A613
SD SILL
SHEET:
03
OF
04
ARCHITECT: BH+A
TM03.27
TM03.27
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
SEALANT
R.O.
FR.
INSTALLATION CLIP
GRILLE SECTION
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
AC14.01
ROD & SEALANT
GBG GRILLE
FR.
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
TM03.27 R.O.
CLR
CLR
SEE ELEV
FR.
G1
4"
CC : MULLION COVERS
UNPUNCHED STEEL STUD - AS PER SCHEDULE
CC01.01
CC01.01 ALUMINUM MULLION COVER. SEE TYPICAL DETAIL T1. SEAL TO WALL CONSTRUCTION AT HEAD AND JAMBS. DO NOT SEAL VERTICAL MULLION COVERS AT SILL TO ALLOW FOR DRAINAGE OF INCIDENTAL MOISTURE.
MULLION COVER
CLR
TM : THERMAL AND MOISTURE PROTECTION
ATTACH NESTED TRACK TO STUD USING MIN. #8 SDS, 6" FROM ENDS & 12" O.C.
CLR
T N E
SEALANT NOTE PELLA WINDOW AND DOOR INSTALLATION SEALANT OR EQUIVALENT ASTM C920 CLASS 25, AAMA 803.3 AND AAMA 808.3 QUALIFIED SEALANT
SEE ARCHITECTURAL DRAWINGS FOR INTERIOR FINISH REQUIREMENTS.
12
10
9
8
7
-
5
-
-
-
4
TM03.27
-
CONCRETE/ CMU: 3 - 3 16" X 1 3 8" EMBEDMENT TAPCONS
-
INSTALLATION CLIP
1
STEEL: 2 - #10 SDS DATE:
6
3
WOOD: 5 - #10 X 3" WOOD SCREWS
ROD & SEALANT
2
AC14.01
USE 1 2" TRACK SEGMENT AS BRACE CLIP WHEN NO TRACK EXISTS. ATTACH TO SILL / HEAD AS NOTED. INSERT NESTED STUD AND SCREW THROUGH WITH MIN. #8 SDS.
DATE:
NOTE: THE DETAILS SHOWN ON THIS SHEET WERE PREPARED BASED ON THE DETAILS SHOWN ON THE ARCHITECTURAL DRAWINGS. THE ARCHITECT AND/OR CONTRACTOR MUST REVIEW THE WALL CONSTRUCTION SPECIFIED FOR THIS PROJECT AND DETERMINE THE APPROPRIATE DETAILS AND FLASHING FOR A WATER MANAGED SYSTEM.
1
REV:
FR.
ROD & SEALANT
REV:
VERIFY FLASHING REQUIREMENTS
TM03.01 R.O.
M
BC03.03 WOOD BLOCKING
-
SEE ELEVATION
TM03.01 WATER RESISTANT BACKER ROD AND SEALANT. TM03.27 WATER RESISTANT BACKER ROD AND SEALANT. (SEE SEALANT NOTE BELOW)
Pella, Iowa
FLASHING TAPE
BC03.03 WOOD BLOCKING. HOLD FLUSH AT WINDOW FRAME. ANCHOR TO MULLION. BC05.09 SHIM AND PLUMB UNITS AS PER INSTALLATION INSTRUCTIONS. (DO NOT OVER SHIM)
Pella Corporation
AC03.01
11
FR.
R.O.
NEST STUD W/ TRACK OF SAME GAUGE MATERIAL (OR MAX. 12 GA.).
W i n d o w and D o o r I n s t a l l a t i o n S o l u t i o n s
BC : BUILDING COMPONENTS (BY OTHERS)
SHIM
T
BC05.09
R
AC14.01
OVER MULLION STRUCTURE EXTENDING 6" ONTO ADJACENT STRUCTURE. PROVIDE WATERSHED OVERLAPS AT ENDS. INSTALLATION CLIP. FIELD CUT AND BEND AS REQUIRED. SPACE 6" FROM EACH EDGE AND 16" ON CENTER. ANCHOR (2 PER CLIP) TO WALL CONSTRUCTION
A
AC03.01 PELLA SMARTFLASH FOIL BACKED, BUTYL WINDOW AND DOOR FLASHING TAPE #850H (OR EQUAL). APPLY
P
AC : ATTACHMENT COMPONENTS
E
PROVIDE FLASHING @ HEAD OF MULLION.
11/18/13
D
Note
SUPPORT SERVICES
DETAIL KEYNOTES
10 VERTICAL MULLION REF. ARCH. DWG.: -
REV 1
CHG
SHT
REVISIONS PROFILE ADJUSTMENTS
CO
DWN
ENG
DATE 6/8/2016
NOTES 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE GIVEN IN INCHES.
597 LBS. MAXIMUM ENDLOAD
2. THE FOLLOWING SYMBOLS INDICATE CRITICAL OR KEY DIMENSIONS. REFER TO DOCUMENT PDS688 AND PELLA SUPPLIER QUALITY MANUAL FOR USAGE INFORMATION. [C] INDICATES CRITICAL DIMENSIONS [K] INDICATES KEY DIMENSIONS 3. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ON THIS DRAWING HAVE BEEN TOLERANCED ACCORDING TO THE ALUMINUM ASSOCIATION TOLERANCE STANDARD FOR ALUMINUM EXTRUSIONS. 4. THE FOLLOWING LINEAL MEASUREMENT ATTRIBUTES MUST BE MAINTAINED: MAX BOW = 0.015 PER FT. MAX CAMBER = 0.015 PER FT. MAX TWIST = 1.0° PER FT.
PLAN DTL.
(END CONNECTION DESIGN FOR WINDLOADS ONLY. SHIMS MUST BE USED TO SUPPORT HORIZONTAL REINFORCEMENT.)
NESTED STEEL STUD END CONNECTION
5. MATERIAL THICKNESS TO BE 0.070 ± 0.006 UNLESS OTHERWISE SHOWN. 6. ALL RADII TO BE 0.015 UNLESS OTHERWISE SHOWN.
1.6356
1.4273 3.4839
FIELD VERIFY ALL DIMENSIONS PRIOR TO ORDERING
M1 IC1
TYPICAL SPACING OF INSTALLATION CLIP AND FRAME SCREWS AT SILL B
B
A
Single unit
B
B
A
A
B
B
A
B
B
A
A
INSTALLATION SHOP DRAWINGS FOR
A
B
B
B
A
A
ORIGINAL: 8-19-16
B
DRAWN BY: TVS
A
CHECKED BY: JA
Project No.: 2-wide Combination
IMPERVIA® CLIP INSTALLATION TYPICAL DETAILS TYPICAL DETAILS APPLY UNLESS OTHERWISE SPECIFIED
146161 SHEET:
04
OF
04
ARCHITECT: BH+A
0.5180
LOCATION: RANDOLPH, MA
4.000° 0.2764
RANDOLPH INTERGENERATIONAL COMMUNITY CENTER
3.8262
