Pentax PZ-10 Flash Bulb Replacement

Pentax PZ-10 Flash Bulb Replacement

Pentax PZ-10 Flash Bulb Replacement This guide will help the user replace the flash bulb.

Written By: Bryan Sugiarto

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Pentax PZ-10 Flash Bulb Replacement

INTRODUCTION If the flash is no longer functioning after continued use, the flash bulb may need to be replaced.

TOOLS: 64 Bit Driver Kit (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Pentax PZ-10 Flash Bulb Replacement

Step 1 — Opening the Flash Bulb 

With the camera facing you, open the flash bulb by pushing the grey button to the right of the logo.

Step 2 — Unscrew Flash Bulb



Remove the two 5.5 mm JIS #0 screws on the sides of the flash assembly.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Pentax PZ-10 Flash Bulb Replacement

Step 3 — Remove Flash Bulb Cover 

Gently pull off the flash cover. It should come free with very little force.



The flash bulb assembly is now ready for replacement

Step 4 — Flash Assembly

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 06:14:20 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4