Philips Bluetooth adapter AEA2700 Teardown

Philips Bluetooth adapter AEA2700 Teardown

Philips Bluetooth adapter AEA2700 Teardown How to open the device and what you'll find inside.

Written By: RFischer

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Philips Bluetooth adapter AEA2700 Teardown

INTRODUCTION How to open the device and what you'll find inside.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

Philips Bluetooth adapter AEA2700 Teardown

Step 1 — Philips Bluetooth adapter AEA2700 Teardown



here you can see the view from the top, the bottom and the backface - device is really tiny: only 7,5cm in diameter!

Step 2



Remove 2 of the rubbers on the bottom side - you'll find 2 screws afterwards>> unscrew them ;)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

Philips Bluetooth adapter AEA2700 Teardown

Step 3 

now simply remove the top cover.



there's only one external component connected by cable: the NFC tag



it's easily possible to remove the circuit



lift it on the front side of the device



and pull it this direction - it helps to push at the cinch connector!

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 6

Philips Bluetooth adapter AEA2700 Teardown

Step 5



Front- and backview of the circuit

Step 6 

when reassembling take care to stick the NFC tag to the correct location in the cover

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 06:03:14 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 6

Philips Bluetooth adapter AEA2700 Teardown

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6