Phoomph Reindeer

1. Cut each sheet of Phoomph into two pieces: 3” x 9, and 9” x 9” 2. Peel the backing paper from one side of both 9 x 9” Phoomph sheets. Join two sheets of Phoomph together to create one thicker sheet. Peel the backing from one side of the double layer of phoomph and cover both sides with one of the print fabrics. Repeat on the other side. 3. Trace the template for the body and legs for Reindeer 1 onto the fabric and cut out with scissors. 4. Repeat step one using the 3”x 9” Phoomph pieces and cover with white fabric. Trace the template for the antlers and tails onto fabric and cut out. 5. Cut the slots in all pieces wide enough to fit the thicker Phoomph. Slide all pieces into the reindeer body. 6. To permanently secure the pieces, use hot glue along all slots. 7. Repeat steps 1 through 6 for Reindeer 2 using the second print fabric. The legs are interchangeable so that you can mix the fabric prints (see photo).

CFC0014

fabric crafting Designed by Iliana McGrath

Peel

What you will need:

Cover

Cut

Phoomph for Fabric, Stiff, 4 sheets, white

0

73650 83039

Fabric-2 coordinating prints, and scraps of white

6

Pen Scissors Hot glue (optional)

Phoomph

Phoomph Reindeer

ph™ Fabric Bonding Sheets Texture

Color(s)

Size "

Thickness

Soft

Assort.

9 x 12

1mm

Stiff

Assort.

9 x 12

1mm

Use the stiff version of Phoomph to create these three dimensional reindeers. Make several for an attractive grouping on a table or mantle.

5 cm

8 Colors White • Black • Blue • Red • Pink • Green • Fuchsia • Orange

©2012 Coats & Clark All Rights Reserved.

manent]

Please Note: Print this pattern using Landscape Orientation. ©2013 Coats & Clark

FOR FA

BRIC!

CoatsandClark.com

Tail

©2013 Coats & Clark

Front Legs Rear Legs

Body

Antlers Reindeer 1

Please Note: Print this pattern using Landscape Orientation.

CoatsandClark.com

©2013 Coats & Clark

Front Legs

Tail

Rear Legs

Body

Antlers Reindeer 2

Please Note: Print this pattern using Landscape Orientation.

CoatsandClark.com