Pipe Straps
EA14
EA14
Rigid Conduit Fittings
Pipe Straps For Rigid Conduit & IMC Type 14-S Use: To support Rigid Conduit and IMC. Features: Snap type - double ribbed
Trade Size
Applicable Third Party Standards: Fed. Spec: FF-S-760 Note: 21⁄2” through 4” sizes also suitable for EMT.
Features: Snap type - double ribbed
1 11⁄4
14-50S 14-75S 14-100S 14-125S
21⁄8 29⁄16 23⁄4 31⁄2
11⁄16 15⁄16 15⁄16 15⁄8
1
1
1 ⁄2 2 21⁄2 3
14-150S 14-200S 14-250S 14-300S
7
31⁄2 4
14-350S 14-400S
Trade Size
Steel Straps Catalog Number
⁄2 ⁄4
1
(inches)
⁄2 ⁄4
Third Party Certification: CSA Certified: 104691 1 ⁄2” through 2” sizes only Applicable Third Party Standards: CSA C22.2 No.18 Fed. Spec: FF-S-760
3
⁄4 ⁄4 3 ⁄4
1
3
1
⁄4 ⁄4 ⁄4 5 ⁄16
3 ⁄8 43⁄8 63⁄16 63⁄4
13
1 ⁄16 21⁄8 25⁄8 3
11⁄8 11⁄4 11⁄4 11⁄4
3
75⁄8 81⁄8
39⁄16 316⁄16
11⁄2 11⁄2
5
1
Type 14-S
⁄8 3 ⁄8 1 ⁄2 1 ⁄2 ⁄8 ⁄8
5
Dimensions in Inches
A
B
Minimum Recommended C Bolt Dia.
1 11⁄4
THR-50S THR-75S THR-100S THR-125S
13⁄4 127⁄32 25⁄16 215⁄16
21⁄4 25⁄16 215⁄16 35⁄8
11⁄2 2 21⁄2 3
THR-150S THR-200S THR-250S THR-300S
35⁄32 41⁄4 411⁄16 511⁄16
315⁄16 5 523⁄32 63⁄4
23
⁄32 ⁄32 1 1
1
23
1
31⁄2 4
THR-350S THR-400S
65⁄16 627⁄32
75⁄16 713⁄16
1 1
5
1 3
Material/Finish: Steel/Zinc Plated
Minimum Recommended C Bolt Dia.
B
Type THR Use: To support Rigid Conduit and IMC.
Dimensions in Inches
A
(inches)
3
Material/Finish: Steel/Zinc Plated
Steel Straps Catalog Number
⁄8 ⁄4
23 23
⁄16 ⁄16 1 ⁄4 1 ⁄4
5
3
3
3
⁄32 ⁄32
⁄4 ⁄4 5 ⁄16 5 ⁄16 5
Type THR
⁄16 ⁄16
Note: 21⁄2” through 4” sizes also suitable for EMT.
Type 14-G Use: To support Rigid Conduit and IMC. Material/Finish: Malleable Iron/Hot Dipped Galvanized Third Party Certification: CSA Certified: 009795.
Applicable Third Party Standards: CSA: C22.2 No.18 Fed. Spec: FF-S-760 Note: 21⁄2” through 4” sizes also suitable for EMT.
Effective December, 2007 Copyright 2007
Malleable Straps Catalog Number
Conduit Size Inches
14-18G 14-25G 14-38G 14-50G
Dimensions in Inches
A
B
Minimum Recommended C Bolt Dia.
⁄2 ⁄32 5 ⁄8 21 ⁄32
⁄2 ⁄8 ⁄4 15 ⁄16
⁄8 ⁄4 3 ⁄8 1 ⁄2
115⁄16 119⁄32 13⁄4 21⁄4
14-75G 14-100G 14-125G 14-150G
3 ⁄4 1 1 1 ⁄4 11⁄2
29⁄16 31⁄16 311⁄16 63⁄4
⁄4 ⁄16 7 ⁄8
1
1
17⁄32 11⁄2 17⁄8 21⁄8
14-200G 14-250G 14-300G 14-350G
2 21⁄2 3 31⁄2
5 ⁄16 515⁄16 77⁄16 83⁄16
11⁄8 13⁄8 15⁄8 113⁄16
29⁄16 31⁄16 31⁄16 43⁄8
1
14-400G 14-500G 14-600G
4 5 6
811⁄16 2 1015⁄16 23⁄4 121⁄2 31⁄8
5 61⁄2 71⁄2
5
1 1
1
1
19
3 13
1 5 3
#10 1 ⁄4 1 ⁄4 1 ⁄4 ⁄4 ⁄4 ⁄8 3 ⁄8
1
Type 14-G
3
⁄2 ⁄2 ⁄2 5 ⁄8 1 1
⁄8 ⁄8 1
5
800-621-1506 www.o-zgedney.com
EA15
EA15
Rigid Conduit Fittings
Clamp Backs & Conduit Spacers For Rigid Conduit, IMC & EMT Clamp Backs Use: Provides spacing from mounting surface when used with malleable iron pipe straps. Material: Malleable Iron Finish: Hot Dip Galvanized
Third Party Certification: CSA Certified: 009795
Trade Size (inches)
Catalog Number
A
⁄2 ⁄4 1
141G 142G 143G
17⁄16 21⁄2 33⁄16
11⁄16 11⁄8 15⁄16
11⁄4 11⁄2 2
144G 145G 146G
311⁄16 315⁄16 51⁄8
17⁄16 11⁄2 2
21⁄2 3 31⁄2
147G 148G 149G
53⁄4 71⁄8 8
21⁄2 213⁄16 37⁄32
4 5 6
150G 151G 152G
83⁄4 101⁄16 6
3 37⁄16 ⁄8 1 311⁄16 ⁄2 12 315⁄16
1 3
Dimensions in Inches
B
C
D
⁄4 ⁄4
⁄8 ⁄8 3 ⁄8
1
3
1
3
⁄16
5
⁄16 ⁄16 3 ⁄8
5
5
⁄8 ⁄8
3 3
⁄16
7
E 3 ⁄8 x 1⁄2 ⁄16 x 7⁄16 9 ⁄16 x 7⁄16 9
1 ⁄2 ⁄16 9 ⁄16
⁄ x 17⁄32 ⁄ x 23⁄32 ⁄ x 13⁄16
9 16 19 32 5 8
9
⁄32 ⁄32 15 ⁄32 1
15
Clamp Back
⁄8 x 11⁄8 ⁄8 x 11⁄8 11 ⁄16 x 111⁄32
⁄32 ⁄32 9 ⁄16
5 5
⁄32 x 19⁄32 ⁄32 x 15⁄16 11⁄4 x 2
15
23
17
27
Applicable Third Party Standards: CSA Standard: C22.2 No. 18
Conduit Spacers Use: For use with malleable iron pipe straps and clamp back, to provide additional spacing between conduit and mounting surface. Features: • Spacers fit snugly under clamp back and makes possible additional spacing away from the mounting surface. Spacers can stack up into each other so that conduit can be installed at any desired distance from walls or ceilings.
Trade Size
Catalog Number
Length
Width
⁄2 ⁄4 1
141-NG 142-NG 143-NG
21⁄2 21⁄2 33⁄16
11⁄16 11⁄8 15⁄16
1
11⁄4 11⁄2 2
144-NG 145-NG 146-NG
33⁄4 315⁄16 55⁄16
11⁄4 19⁄16 23⁄16
1
21⁄2 3 31⁄2 4
147-NG 148-NG 149-NG 150-NG
513⁄16 73⁄16 8 83⁄4
29⁄16 213⁄16 31⁄4 37⁄16
3
(inches) 1 3
Dimensions in Inches
Thickness ⁄4 ⁄4 ⁄4
1 1
⁄4 ⁄4 ⁄4
1
Nest Back Fitting
1
⁄8 ⁄8 ⁄8 3 ⁄8 3
Not included
3
Materials: Malleable Iron Finish: Hot Dip or Mechanical Galvanized Third Party Certification: CSA Certified: 009795 Not included
Applicable Third Party Standards: CSA Standard: C22.2 No. 18
Effective December, 2007 Copyright 2007
Typical Installation
800-621-1506 www.o-zgedney.com
EA16
EA16
Rigid Conduit Fittings
Beam Clamps Type IS Use: Provides support for conduit hanging systems. Material: Malleable Iron clamp Steel Screw, case hardened
Catalog Number
A Tapped Holes
IS-500 IS-509
1
IS-501 IS-502 IS-503
5
B Dimensions in Inches Jaw Opening C D E
⁄4 - 20 10 - 24
15
⁄16 - 18 ⁄8 - 16 1 ⁄2 - 13
15 ⁄16 1 11⁄8
3
15
⁄16 ⁄16
Max. Load (lbs.)
⁄8 ⁄8
15⁄8 15⁄8
1 1
335 335
11⁄8 13⁄8 111⁄16
113⁄16 21⁄16 21⁄4
11⁄2 2 25⁄8
525 750 900
7 7
Finish: Clamp - Hot Dip Galvanized Screw - Zinc Electroplated
Type IS
B - Jaw Opening C
D
E A - Tapped Holes (2)
Effective December, 2007 Copyright 2007
Load
800-621-1506 www.o-zgedney.com
EA17
EA17
Rigid Conduit Fittings
Conduit Clamps Type UBC Right Angle
Type UPC Parallel
Type UEC Edge type Use: Designed to secure Rigid Conduit, IMC or EMT across, parallel or perpendicular to beam, channel and angle supports.
Type UBC-G Right Angle Type
Type UEC - G Edge Type
Features: • Easily installed • Capable of withstanding heavy loads Material: All components are Malleable Iron except nuts and bolts which are steel. Finish: Clamp - Hot Dipped Galvanized Hardware - Mechanically Galvanized
Type UPC-G Parallel Type
Note: Edge type UEC used for rigid conduit only.
Right Angle Type Trade Size Catalog (inches) Number
Edge Type Catalog Number
⁄2 ⁄4
1
UBC-50G UPC-50G UBC-75G UPC-75G UBC-100G UPC-100G
UEC-50G UEC-75G UEC-100G
11⁄4 11⁄2 2
UBC-125G UPC-125G UBC-150G UPC-150G UBC-200G UPC-200G
UEC-125G UEC-150G UEC-200G
21⁄2 3 31⁄2 4
UBC-250G UBC-300G UBC-350G UBC-400G
UEC-250G UEC-300G
5 6
UBC-500G UBC-600G
1 3
Effective December, 2007 Copyright 2007
Parallel Type Catalog Number
UPC-250G UPC-300G UPC-350G UPC-400G
800-621-1506 www.o-zgedney.com
EA18
EA18
Rigid Conduit Fittings
Conduit U-Bolts & Hangers For Rigid Conduit, IMC & EMT Type U
Trade Size
Conduit U-Bolts
(inches)
Features: • 2 hex nuts
⁄2 ⁄4
A
B
C
D
1
15 ⁄16 11⁄8 7 1 ⁄16
13⁄16 17⁄16 13⁄4
21⁄2 21⁄2 213⁄16
11⁄2 11⁄2 11⁄2
11⁄4 11⁄2 2
U-125SG U-150SG U-200SG
13⁄4 2 21⁄2
21⁄16 25⁄16 27⁄8
31⁄4 31⁄2 4
11⁄2 11⁄2 13⁄4
21⁄2 3 31⁄2
U-250SG U-300SG U-350SG
3 35⁄8 41⁄8
33⁄8 4 41⁄2
41⁄2 51⁄4 511⁄16
13⁄4 13⁄4 13⁄4
4 5 6
U-400SG U-500SG U-600SG
45⁄8 55⁄8 611⁄16
5 6 71⁄16
61⁄4 73⁄8 83⁄8
13⁄4 13⁄4 13⁄4
3
Finish: Mechanically Galvanized
Dimensions in Inches
U-50SG U-75SG U-100SG
1
Material: Steel
Catalog Number
Type H-SBS Conduit Hangers with Swing Bolt and Nut
Trade Size (inches)
Material/Finish: Steel/Zinc Plated
With Bolt/Nut Catalog Number
Dimensions in Inches
A
B
⁄4 - 20 ⁄4 - 20 ⁄16 - 18
1 1 5
⁄16 - 18 ⁄ - 18 ⁄ - 16
5 5
16 3 8
⁄8 - 16 ⁄8 - 16 ⁄8 - 16
3 3
⁄8 - 16 ⁄8 - 16 ⁄8 - 16
3 3 3
Max. Bolt Size
H-0SBS H-1SBS H-2SBS
123⁄32 127⁄32 211⁄32
3
⁄4 ⁄8 7 ⁄8
1
⁄32 15⁄32
7
1
11⁄4 11⁄2 2
H-3SBS H-4SBS H-5SBS
221⁄32 31⁄16 319⁄32
13⁄8 15⁄8 17⁄8
7 ⁄8 1 11⁄4
1
3
7
8 29
Type U
3
⁄2 ⁄4 1
1
⁄
C
Thread Size
⁄4 ⁄4 ⁄4
1
⁄4 ⁄16 ⁄16
5 5
Type H-SBS
Type H-WBS Conduit Hangers with Carriage Bolt and Nut
Trade Size (inches)
Material/Finish: Steel/Zinc Plated
A
B
Max. Bolt Size
17⁄8 2 213⁄32
3
⁄4 ⁄8 7 ⁄8
1
⁄32 15⁄32
7
1
11⁄4 11⁄2 2 21⁄2
H-3WBS H-4WBS H-5WBS H-6WBS
213⁄16 37⁄32 33⁄4 47⁄32
13⁄8 15⁄8 17⁄8 21⁄8
7 ⁄8 1 11⁄4 11⁄4
1
3 31⁄2 4
H-7WBS H-8WBS H-9WBS
47⁄8 53⁄8 67⁄16
23⁄8 211⁄16 3
11⁄4 11⁄4 13⁄4
5
7
⁄
C
H-0WBS H-1WBS H-2WBS
3
Effective December, 2007 Copyright 2007
Dimensions in Inches
⁄2 ⁄4 1
1
Type H-WBS
With Bolt/Nut Catalog Number
8 29
⁄4 ⁄4 ⁄4
1
⁄4 ⁄16 ⁄16 5 ⁄16 5 5
⁄16 ⁄16 ⁄2
5 1
800-621-1506 www.o-zgedney.com
EA19
EA19
Rigid Conduit Fittings
Conduit Clamps For Rigid Conduit, IMC & EMT Type J Use: For securing Rigid Conduit, IMC, EMT and Flexible Metal Conduit.
D
Material: Malleable Iron Steel Bolt
C
A B
Finish: Mechanically Galvanized Third Party Certification: CSA Certified: 009795
Type J
Applicable Third Party Standards: CSA Standard: C22.2 No. 18
Use: For securing Rigid Conduit, IMC and EMT. Swivel grip rotates a full 360°. Material/Finish: Malleable Iron/Zinc Plated Steel square head screw Optional Finish: Mechanically Galvanized Contact your local representative for pricing, availability and minimum order quantities.
A
B
C
29⁄16 27⁄8 31⁄2 33⁄4
19⁄16 17⁄8 23⁄16 21⁄2
13⁄8 113⁄32 13⁄4 13⁄4
15⁄8 115⁄16 2 1 ⁄4 29⁄16
5
1 11⁄4
J-50G J-75G J-100G J-125G
11⁄2 2 21⁄2 -3 31⁄2 -4
J-150G J-200G J-2530G J-3540G
41⁄16 5 65⁄16 75⁄8
27⁄8 35⁄16 47⁄16 57⁄16
2 21⁄16 25⁄8 31⁄4
213⁄16 37⁄16 49⁄16 53⁄4
3
⁄2 ⁄4
1 3
Type CBC Conduit C Clamp
Dimensions in Inches
Trade Size Catalog (inches) Number
Trade Size (inches)
⁄2 - 3⁄4 -1 - 11⁄4 11⁄4 - 11⁄2 - 2
1
Catalog Number CBC-1 CBC-2
D
Bolt Size ⁄16-18 x 11⁄2 ⁄16-18 x 11⁄2 5 ⁄16-18 x 11⁄2 3 ⁄8 - 16 x 11⁄2 5
⁄8-16 ⁄2-13 5 ⁄8-11 5 ⁄8-11 1
x x x x
11⁄2 13⁄4 21⁄2 21⁄2
Dimensions in Inches
Length
Width
33⁄8 45⁄8
29⁄16 31⁄4
Swivel Grip Type CBC
Note: 1 CBC-1– maximum beam thickness of 1⁄4” when using 11⁄4” conduit. 2 CBC-2– maximum beam thickness of 1⁄8” when using 2” conduit.
Effective December, 2007 Copyright 2007
800-621-1506 www.o-zgedney.com
EA20
EA20
Rigid Conduit Fittings
Tray-Bond™ Cable Tray Clamps For Rigid Conduit, IMC & EMT Type CTC Use: For connecting and grounding rigid conduit, IMC, or EMT to cable trays. Secures and bonds metal conduit (rigid steel or aluminum, IMC and EMT) to the side rails of steel or aluminum cable trays without drilling or welding the tray. On the 11⁄2” through 4” sizes, conduits can attach to the tray from any angle up to 120°, allowing large power or control cables to be routed easily. Features: • Fast Installation • Low Product Cost • Excellent Grounding Continuity • Variable Conduit Entry 11⁄2” - 4” sizes • High Mechanical Strength • Compact Design • Meets NEC 318-7 (b)(4) Bonding Requirements
Type CTC-0507 & Type CTC-1012 1 ⁄2” — 11⁄4” Sizes Right Angle to Tray
Rigid or IMC, EMT Trade Size (inches)
Catalog Number
⁄2 - 3⁄4 1 - 11⁄4 11⁄2 2
CTC-0507 CTC-1012 CTC-150 CTC-200
1
21⁄2 3 31⁄2 4
CTC-250 CTC-300 CTC-350 CTC-400
3
1
Suggested Specifications: “Raceways connected to cable trays shall be properly bonded using UL Listed and CSA Certified bolted mechanical connectors made from malleable iron, hot dip galvanized components and steel, mechanically galvanized bolts. The cable tray conduit clamps shall be O-Z/Gedney, Type CTC”.
Type CTC-150 & Type CTC-400 11⁄2” — 4” Sizes Variable Angle to Tray
T
U
Recommended Ins. Torque In. - Lbs.
⁄4 ⁄4 3 ⁄8 3 ⁄8
21⁄2 31⁄4 31⁄2 4
60 115 115 190
⁄8 ⁄8 3 ⁄8 3 ⁄8
41⁄2 51⁄4 53⁄4 61⁄4
190 190 190 190
Dimensions in Inches
U-Bolt & Nut Size
W
L
⁄4 - 20 ⁄16 - 18 5 ⁄16 - 18 3 ⁄8 - 16
21⁄4 27⁄8 37⁄8 41⁄2
21⁄4 21⁄4 31⁄2 4
1
⁄8 ⁄8 3 ⁄8 3 ⁄8
5 55⁄8 61⁄8 65⁄8
41⁄2 51⁄8 51⁄2 6
3
*Insulated Bushing not included
5
3
-
16 16 16 16
1
3
Type CTGC Cable Tray Grounding clamps for use on most types of cable trays. See page MA1. PATENTED
How Tray-Bond™ Clamps Work: The edge of the cable tray rail provides the surface on which the serrations in the clamps grounding pad “bite” into the tray. The lower portion of the clamp has a sharp triangular edge which grabs the underside of the rail. As the U-bolt is tightened, all the force is concentrated in the clamping jaws thus providing an excellent grounding path and high strength mechanical attachment. Material/Finish: Malleable Iron/Mechanically Galvanized U-Bolts and Nuts: Steel/Mechanically Galvanized Third Party Certification: UL Listed: E-24264 CSA Certified: 009795 for rigid and EMT only Applicable Third Party Standards: UL Standard: 467 CSA Standard: C22.2 No. 18
Effective December, 2007 Copyright 2007
800-621-1506 www.o-zgedney.com
EA14
Rigid Conduit Fittings
Pipe Straps For Rigid Conduit & IMC Type 14-S Use: To support Rigid Conduit and IMC. Features: Snap type - double ribbed
Trade Size
Applicable Third Party Standards: Fed. Spec: FF-S-760 Note: 21⁄2” through 4” sizes also suitable for EMT.
Features: Snap type - double ribbed
1 11⁄4
14-50S 14-75S 14-100S 14-125S
21⁄8 29⁄16 23⁄4 31⁄2
11⁄16 15⁄16 15⁄16 15⁄8
1
1
1 ⁄2 2 21⁄2 3
14-150S 14-200S 14-250S 14-300S
7
31⁄2 4
14-350S 14-400S
Trade Size
Steel Straps Catalog Number
⁄2 ⁄4
1
(inches)
⁄2 ⁄4
Third Party Certification: CSA Certified: 104691 1 ⁄2” through 2” sizes only Applicable Third Party Standards: CSA C22.2 No.18 Fed. Spec: FF-S-760
3
⁄4 ⁄4 3 ⁄4
1
3
1
⁄4 ⁄4 ⁄4 5 ⁄16
3 ⁄8 43⁄8 63⁄16 63⁄4
13
1 ⁄16 21⁄8 25⁄8 3
11⁄8 11⁄4 11⁄4 11⁄4
3
75⁄8 81⁄8
39⁄16 316⁄16
11⁄2 11⁄2
5
1
Type 14-S
⁄8 3 ⁄8 1 ⁄2 1 ⁄2 ⁄8 ⁄8
5
Dimensions in Inches
A
B
Minimum Recommended C Bolt Dia.
1 11⁄4
THR-50S THR-75S THR-100S THR-125S
13⁄4 127⁄32 25⁄16 215⁄16
21⁄4 25⁄16 215⁄16 35⁄8
11⁄2 2 21⁄2 3
THR-150S THR-200S THR-250S THR-300S
35⁄32 41⁄4 411⁄16 511⁄16
315⁄16 5 523⁄32 63⁄4
23
⁄32 ⁄32 1 1
1
23
1
31⁄2 4
THR-350S THR-400S
65⁄16 627⁄32
75⁄16 713⁄16
1 1
5
1 3
Material/Finish: Steel/Zinc Plated
Minimum Recommended C Bolt Dia.
B
Type THR Use: To support Rigid Conduit and IMC.
Dimensions in Inches
A
(inches)
3
Material/Finish: Steel/Zinc Plated
Steel Straps Catalog Number
⁄8 ⁄4
23 23
⁄16 ⁄16 1 ⁄4 1 ⁄4
5
3
3
3
⁄32 ⁄32
⁄4 ⁄4 5 ⁄16 5 ⁄16 5
Type THR
⁄16 ⁄16
Note: 21⁄2” through 4” sizes also suitable for EMT.
Type 14-G Use: To support Rigid Conduit and IMC. Material/Finish: Malleable Iron/Hot Dipped Galvanized Third Party Certification: CSA Certified: 009795.
Applicable Third Party Standards: CSA: C22.2 No.18 Fed. Spec: FF-S-760 Note: 21⁄2” through 4” sizes also suitable for EMT.
Effective December, 2007 Copyright 2007
Malleable Straps Catalog Number
Conduit Size Inches
14-18G 14-25G 14-38G 14-50G
Dimensions in Inches
A
B
Minimum Recommended C Bolt Dia.
⁄2 ⁄32 5 ⁄8 21 ⁄32
⁄2 ⁄8 ⁄4 15 ⁄16
⁄8 ⁄4 3 ⁄8 1 ⁄2
115⁄16 119⁄32 13⁄4 21⁄4
14-75G 14-100G 14-125G 14-150G
3 ⁄4 1 1 1 ⁄4 11⁄2
29⁄16 31⁄16 311⁄16 63⁄4
⁄4 ⁄16 7 ⁄8
1
1
17⁄32 11⁄2 17⁄8 21⁄8
14-200G 14-250G 14-300G 14-350G
2 21⁄2 3 31⁄2
5 ⁄16 515⁄16 77⁄16 83⁄16
11⁄8 13⁄8 15⁄8 113⁄16
29⁄16 31⁄16 31⁄16 43⁄8
1
14-400G 14-500G 14-600G
4 5 6
811⁄16 2 1015⁄16 23⁄4 121⁄2 31⁄8
5 61⁄2 71⁄2
5
1 1
1
1
19
3 13
1 5 3
#10 1 ⁄4 1 ⁄4 1 ⁄4 ⁄4 ⁄4 ⁄8 3 ⁄8
1
Type 14-G
3
⁄2 ⁄2 ⁄2 5 ⁄8 1 1
⁄8 ⁄8 1
5
800-621-1506 www.o-zgedney.com
EA15
EA15
Rigid Conduit Fittings
Clamp Backs & Conduit Spacers For Rigid Conduit, IMC & EMT Clamp Backs Use: Provides spacing from mounting surface when used with malleable iron pipe straps. Material: Malleable Iron Finish: Hot Dip Galvanized
Third Party Certification: CSA Certified: 009795
Trade Size (inches)
Catalog Number
A
⁄2 ⁄4 1
141G 142G 143G
17⁄16 21⁄2 33⁄16
11⁄16 11⁄8 15⁄16
11⁄4 11⁄2 2
144G 145G 146G
311⁄16 315⁄16 51⁄8
17⁄16 11⁄2 2
21⁄2 3 31⁄2
147G 148G 149G
53⁄4 71⁄8 8
21⁄2 213⁄16 37⁄32
4 5 6
150G 151G 152G
83⁄4 101⁄16 6
3 37⁄16 ⁄8 1 311⁄16 ⁄2 12 315⁄16
1 3
Dimensions in Inches
B
C
D
⁄4 ⁄4
⁄8 ⁄8 3 ⁄8
1
3
1
3
⁄16
5
⁄16 ⁄16 3 ⁄8
5
5
⁄8 ⁄8
3 3
⁄16
7
E 3 ⁄8 x 1⁄2 ⁄16 x 7⁄16 9 ⁄16 x 7⁄16 9
1 ⁄2 ⁄16 9 ⁄16
⁄ x 17⁄32 ⁄ x 23⁄32 ⁄ x 13⁄16
9 16 19 32 5 8
9
⁄32 ⁄32 15 ⁄32 1
15
Clamp Back
⁄8 x 11⁄8 ⁄8 x 11⁄8 11 ⁄16 x 111⁄32
⁄32 ⁄32 9 ⁄16
5 5
⁄32 x 19⁄32 ⁄32 x 15⁄16 11⁄4 x 2
15
23
17
27
Applicable Third Party Standards: CSA Standard: C22.2 No. 18
Conduit Spacers Use: For use with malleable iron pipe straps and clamp back, to provide additional spacing between conduit and mounting surface. Features: • Spacers fit snugly under clamp back and makes possible additional spacing away from the mounting surface. Spacers can stack up into each other so that conduit can be installed at any desired distance from walls or ceilings.
Trade Size
Catalog Number
Length
Width
⁄2 ⁄4 1
141-NG 142-NG 143-NG
21⁄2 21⁄2 33⁄16
11⁄16 11⁄8 15⁄16
1
11⁄4 11⁄2 2
144-NG 145-NG 146-NG
33⁄4 315⁄16 55⁄16
11⁄4 19⁄16 23⁄16
1
21⁄2 3 31⁄2 4
147-NG 148-NG 149-NG 150-NG
513⁄16 73⁄16 8 83⁄4
29⁄16 213⁄16 31⁄4 37⁄16
3
(inches) 1 3
Dimensions in Inches
Thickness ⁄4 ⁄4 ⁄4
1 1
⁄4 ⁄4 ⁄4
1
Nest Back Fitting
1
⁄8 ⁄8 ⁄8 3 ⁄8 3
Not included
3
Materials: Malleable Iron Finish: Hot Dip or Mechanical Galvanized Third Party Certification: CSA Certified: 009795 Not included
Applicable Third Party Standards: CSA Standard: C22.2 No. 18
Effective December, 2007 Copyright 2007
Typical Installation
800-621-1506 www.o-zgedney.com
EA16
EA16
Rigid Conduit Fittings
Beam Clamps Type IS Use: Provides support for conduit hanging systems. Material: Malleable Iron clamp Steel Screw, case hardened
Catalog Number
A Tapped Holes
IS-500 IS-509
1
IS-501 IS-502 IS-503
5
B Dimensions in Inches Jaw Opening C D E
⁄4 - 20 10 - 24
15
⁄16 - 18 ⁄8 - 16 1 ⁄2 - 13
15 ⁄16 1 11⁄8
3
15
⁄16 ⁄16
Max. Load (lbs.)
⁄8 ⁄8
15⁄8 15⁄8
1 1
335 335
11⁄8 13⁄8 111⁄16
113⁄16 21⁄16 21⁄4
11⁄2 2 25⁄8
525 750 900
7 7
Finish: Clamp - Hot Dip Galvanized Screw - Zinc Electroplated
Type IS
B - Jaw Opening C
D
E A - Tapped Holes (2)
Effective December, 2007 Copyright 2007
Load
800-621-1506 www.o-zgedney.com
EA17
EA17
Rigid Conduit Fittings
Conduit Clamps Type UBC Right Angle
Type UPC Parallel
Type UEC Edge type Use: Designed to secure Rigid Conduit, IMC or EMT across, parallel or perpendicular to beam, channel and angle supports.
Type UBC-G Right Angle Type
Type UEC - G Edge Type
Features: • Easily installed • Capable of withstanding heavy loads Material: All components are Malleable Iron except nuts and bolts which are steel. Finish: Clamp - Hot Dipped Galvanized Hardware - Mechanically Galvanized
Type UPC-G Parallel Type
Note: Edge type UEC used for rigid conduit only.
Right Angle Type Trade Size Catalog (inches) Number
Edge Type Catalog Number
⁄2 ⁄4
1
UBC-50G UPC-50G UBC-75G UPC-75G UBC-100G UPC-100G
UEC-50G UEC-75G UEC-100G
11⁄4 11⁄2 2
UBC-125G UPC-125G UBC-150G UPC-150G UBC-200G UPC-200G
UEC-125G UEC-150G UEC-200G
21⁄2 3 31⁄2 4
UBC-250G UBC-300G UBC-350G UBC-400G
UEC-250G UEC-300G
5 6
UBC-500G UBC-600G
1 3
Effective December, 2007 Copyright 2007
Parallel Type Catalog Number
UPC-250G UPC-300G UPC-350G UPC-400G
800-621-1506 www.o-zgedney.com
EA18
EA18
Rigid Conduit Fittings
Conduit U-Bolts & Hangers For Rigid Conduit, IMC & EMT Type U
Trade Size
Conduit U-Bolts
(inches)
Features: • 2 hex nuts
⁄2 ⁄4
A
B
C
D
1
15 ⁄16 11⁄8 7 1 ⁄16
13⁄16 17⁄16 13⁄4
21⁄2 21⁄2 213⁄16
11⁄2 11⁄2 11⁄2
11⁄4 11⁄2 2
U-125SG U-150SG U-200SG
13⁄4 2 21⁄2
21⁄16 25⁄16 27⁄8
31⁄4 31⁄2 4
11⁄2 11⁄2 13⁄4
21⁄2 3 31⁄2
U-250SG U-300SG U-350SG
3 35⁄8 41⁄8
33⁄8 4 41⁄2
41⁄2 51⁄4 511⁄16
13⁄4 13⁄4 13⁄4
4 5 6
U-400SG U-500SG U-600SG
45⁄8 55⁄8 611⁄16
5 6 71⁄16
61⁄4 73⁄8 83⁄8
13⁄4 13⁄4 13⁄4
3
Finish: Mechanically Galvanized
Dimensions in Inches
U-50SG U-75SG U-100SG
1
Material: Steel
Catalog Number
Type H-SBS Conduit Hangers with Swing Bolt and Nut
Trade Size (inches)
Material/Finish: Steel/Zinc Plated
With Bolt/Nut Catalog Number
Dimensions in Inches
A
B
⁄4 - 20 ⁄4 - 20 ⁄16 - 18
1 1 5
⁄16 - 18 ⁄ - 18 ⁄ - 16
5 5
16 3 8
⁄8 - 16 ⁄8 - 16 ⁄8 - 16
3 3
⁄8 - 16 ⁄8 - 16 ⁄8 - 16
3 3 3
Max. Bolt Size
H-0SBS H-1SBS H-2SBS
123⁄32 127⁄32 211⁄32
3
⁄4 ⁄8 7 ⁄8
1
⁄32 15⁄32
7
1
11⁄4 11⁄2 2
H-3SBS H-4SBS H-5SBS
221⁄32 31⁄16 319⁄32
13⁄8 15⁄8 17⁄8
7 ⁄8 1 11⁄4
1
3
7
8 29
Type U
3
⁄2 ⁄4 1
1
⁄
C
Thread Size
⁄4 ⁄4 ⁄4
1
⁄4 ⁄16 ⁄16
5 5
Type H-SBS
Type H-WBS Conduit Hangers with Carriage Bolt and Nut
Trade Size (inches)
Material/Finish: Steel/Zinc Plated
A
B
Max. Bolt Size
17⁄8 2 213⁄32
3
⁄4 ⁄8 7 ⁄8
1
⁄32 15⁄32
7
1
11⁄4 11⁄2 2 21⁄2
H-3WBS H-4WBS H-5WBS H-6WBS
213⁄16 37⁄32 33⁄4 47⁄32
13⁄8 15⁄8 17⁄8 21⁄8
7 ⁄8 1 11⁄4 11⁄4
1
3 31⁄2 4
H-7WBS H-8WBS H-9WBS
47⁄8 53⁄8 67⁄16
23⁄8 211⁄16 3
11⁄4 11⁄4 13⁄4
5
7
⁄
C
H-0WBS H-1WBS H-2WBS
3
Effective December, 2007 Copyright 2007
Dimensions in Inches
⁄2 ⁄4 1
1
Type H-WBS
With Bolt/Nut Catalog Number
8 29
⁄4 ⁄4 ⁄4
1
⁄4 ⁄16 ⁄16 5 ⁄16 5 5
⁄16 ⁄16 ⁄2
5 1
800-621-1506 www.o-zgedney.com
EA19
EA19
Rigid Conduit Fittings
Conduit Clamps For Rigid Conduit, IMC & EMT Type J Use: For securing Rigid Conduit, IMC, EMT and Flexible Metal Conduit.
D
Material: Malleable Iron Steel Bolt
C
A B
Finish: Mechanically Galvanized Third Party Certification: CSA Certified: 009795
Type J
Applicable Third Party Standards: CSA Standard: C22.2 No. 18
Use: For securing Rigid Conduit, IMC and EMT. Swivel grip rotates a full 360°. Material/Finish: Malleable Iron/Zinc Plated Steel square head screw Optional Finish: Mechanically Galvanized Contact your local representative for pricing, availability and minimum order quantities.
A
B
C
29⁄16 27⁄8 31⁄2 33⁄4
19⁄16 17⁄8 23⁄16 21⁄2
13⁄8 113⁄32 13⁄4 13⁄4
15⁄8 115⁄16 2 1 ⁄4 29⁄16
5
1 11⁄4
J-50G J-75G J-100G J-125G
11⁄2 2 21⁄2 -3 31⁄2 -4
J-150G J-200G J-2530G J-3540G
41⁄16 5 65⁄16 75⁄8
27⁄8 35⁄16 47⁄16 57⁄16
2 21⁄16 25⁄8 31⁄4
213⁄16 37⁄16 49⁄16 53⁄4
3
⁄2 ⁄4
1 3
Type CBC Conduit C Clamp
Dimensions in Inches
Trade Size Catalog (inches) Number
Trade Size (inches)
⁄2 - 3⁄4 -1 - 11⁄4 11⁄4 - 11⁄2 - 2
1
Catalog Number CBC-1 CBC-2
D
Bolt Size ⁄16-18 x 11⁄2 ⁄16-18 x 11⁄2 5 ⁄16-18 x 11⁄2 3 ⁄8 - 16 x 11⁄2 5
⁄8-16 ⁄2-13 5 ⁄8-11 5 ⁄8-11 1
x x x x
11⁄2 13⁄4 21⁄2 21⁄2
Dimensions in Inches
Length
Width
33⁄8 45⁄8
29⁄16 31⁄4
Swivel Grip Type CBC
Note: 1 CBC-1– maximum beam thickness of 1⁄4” when using 11⁄4” conduit. 2 CBC-2– maximum beam thickness of 1⁄8” when using 2” conduit.
Effective December, 2007 Copyright 2007
800-621-1506 www.o-zgedney.com
EA20
EA20
Rigid Conduit Fittings
Tray-Bond™ Cable Tray Clamps For Rigid Conduit, IMC & EMT Type CTC Use: For connecting and grounding rigid conduit, IMC, or EMT to cable trays. Secures and bonds metal conduit (rigid steel or aluminum, IMC and EMT) to the side rails of steel or aluminum cable trays without drilling or welding the tray. On the 11⁄2” through 4” sizes, conduits can attach to the tray from any angle up to 120°, allowing large power or control cables to be routed easily. Features: • Fast Installation • Low Product Cost • Excellent Grounding Continuity • Variable Conduit Entry 11⁄2” - 4” sizes • High Mechanical Strength • Compact Design • Meets NEC 318-7 (b)(4) Bonding Requirements
Type CTC-0507 & Type CTC-1012 1 ⁄2” — 11⁄4” Sizes Right Angle to Tray
Rigid or IMC, EMT Trade Size (inches)
Catalog Number
⁄2 - 3⁄4 1 - 11⁄4 11⁄2 2
CTC-0507 CTC-1012 CTC-150 CTC-200
1
21⁄2 3 31⁄2 4
CTC-250 CTC-300 CTC-350 CTC-400
3
1
Suggested Specifications: “Raceways connected to cable trays shall be properly bonded using UL Listed and CSA Certified bolted mechanical connectors made from malleable iron, hot dip galvanized components and steel, mechanically galvanized bolts. The cable tray conduit clamps shall be O-Z/Gedney, Type CTC”.
Type CTC-150 & Type CTC-400 11⁄2” — 4” Sizes Variable Angle to Tray
T
U
Recommended Ins. Torque In. - Lbs.
⁄4 ⁄4 3 ⁄8 3 ⁄8
21⁄2 31⁄4 31⁄2 4
60 115 115 190
⁄8 ⁄8 3 ⁄8 3 ⁄8
41⁄2 51⁄4 53⁄4 61⁄4
190 190 190 190
Dimensions in Inches
U-Bolt & Nut Size
W
L
⁄4 - 20 ⁄16 - 18 5 ⁄16 - 18 3 ⁄8 - 16
21⁄4 27⁄8 37⁄8 41⁄2
21⁄4 21⁄4 31⁄2 4
1
⁄8 ⁄8 3 ⁄8 3 ⁄8
5 55⁄8 61⁄8 65⁄8
41⁄2 51⁄8 51⁄2 6
3
*Insulated Bushing not included
5
3
-
16 16 16 16
1
3
Type CTGC Cable Tray Grounding clamps for use on most types of cable trays. See page MA1. PATENTED
How Tray-Bond™ Clamps Work: The edge of the cable tray rail provides the surface on which the serrations in the clamps grounding pad “bite” into the tray. The lower portion of the clamp has a sharp triangular edge which grabs the underside of the rail. As the U-bolt is tightened, all the force is concentrated in the clamping jaws thus providing an excellent grounding path and high strength mechanical attachment. Material/Finish: Malleable Iron/Mechanically Galvanized U-Bolts and Nuts: Steel/Mechanically Galvanized Third Party Certification: UL Listed: E-24264 CSA Certified: 009795 for rigid and EMT only Applicable Third Party Standards: UL Standard: 467 CSA Standard: C22.2 No. 18
Effective December, 2007 Copyright 2007
800-621-1506 www.o-zgedney.com
