PIZZATO CS ME EXPANSION MODULES WITH INSTANTANEOUS CONTACTS OR DELAYED CONTACTS AT DE ENERGIZING
5G
Expansion module CS ME-01 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/81, shape A
Expansion modules with output contacts Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • Connection of the input channels to opposite potentials • Small 22,5 mm housing • Output contacts: 5 NO safety contacts, 1 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vac/dc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 4 kV 250 V II 0,3 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption AC: Rated power consumption DC:
24 Vac/dc; 50...60 Hz 10% 15% of Un < 5 VA < 2W
Control circuit Protection against short circuits: Operating time of PTC: Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
resistance PTC, Ih=0,5 A intervention > 100 ms, reset > 3 s 50 < 40 ms < 40 ms
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95
Markings, quality marks and certificates:
Approval UL: Approval GOST:
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
5 NO safety contacts, 1 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 72 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-01V024 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Supply voltage 024 24 Vac/dc
Data type approved by UL 15%
Rated operating voltage (Un): Rated power consumption AC: Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vac/dc; 50...60 Hz < 5 VA < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Only for 24 Vac/dc version, supply from remote class 2 source or limited voltage and limited energy.
5/51
General Catalog 2013-2014
5G Expansion module CS ME-01 Operations diagram
Terminals layout
13
23
33
Y1 A1/A2 A1
43
53
61 Y1/Y2 13/14, 23/34, 43/44, 53/54 61/62
CH1 CH2
tA
A2 44 14
24
34
54
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply
62
Y2
Internal wiring diagram L/+ A1
13
23
33
43
53
61
Y1
14
24
34
44
54
62
Y2
LED CH1 K1
K2
LED CH2
A2
N/-
Inputs configuration 1 channel control
2 channels control
L/+
L/+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-01 Expansion module
14
N/-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-01 Expansion module
A1
A2
N/-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/52
5G
Expansion module CS ME-02 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/81, shape A
Expansion modules with output contacts Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • Connection of the input channels to opposite potentials • Small 22,5 mm housing • Output contacts: 4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 2,5 kV 250 V II 0,3 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC:
24 Vdc 10% 15% of Un < 2W
Control circuit Protection against short circuits: Operating time of PTC: Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
resistance PTC, Ih=0,5 A intervention > 100 ms, reset > 3 s 50 < 100 ms < 60 ms
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 64 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-02VU24 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Supply voltage U24 24 Vdc
Data type approved by UL 15%
Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Only for 24 Vdc version, supply from remote class 2 source or limited voltage and limited energy.
5/53
General Catalog 2013-2014
5G Expansion module CS ME-02 Operations diagram
Terminals layout
13
23
33
Y1 A1/A2 A1
43
51
61 Y1/Y2 13/14, 23/34, 33/34, 43/44 51/52, 61/62
CH1 CH2
tA
A2 44 14
24
34
52
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply
62
Y2
Internal wiring diagram + A1
13
23
33
43
51
61
Y1
14
24
34
44
52
62
Y2
LED CH1 K1
LED CH2
K2
A2
-
Inputs configuration 1 channel control
2 channels control
L/+
L/+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-02 Expansion module
14
N/-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-02 Expansion module
A1
A2
N/-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/54
5G
Expansion module CS ME-03 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/82, shape D
Expansion modules with output contacts Main functions • For safety applications up to SIL 3 / PL e • Module for solid-state output circuits (optical barriers type 2 and 4) • 2 OSSD inputs • Small 22,5 mm housing • Output contacts: 3 NO safety contacts, 1 NC feedback contact/EDM contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the solid-state output circuits) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 4 kV 250 V II 0,2 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC: Start power consumption:
24 Vdc 10% 20% of Un < 2W < 3W
Control circuit Operating time tA: Releasing time tR1:
< 40 ms < 15 ms
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
3 NO safety contacts, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 36 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-03VU24 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Supply voltage U24 24 Vdc
Data type approved by UL 15%
Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Only for 24 Vac/dc version, supply from remote class 2 source or limited voltage and limited energy.
5/55
General Catalog 2013-2014
5G Expansion module CS ME-03 Operations diagram
Terminals layout
13
23
33 EDM
OS1 A2 OS1 OS2 OS2 13/14, 23/34, 33/34 EDM/EDM
CH1 CH2
tA
tR1
Legend: tA: Operating time tR1: Releasing time 14
24
34 EDM
Internal wiring diagram + OS1
OS2
13
23
33
EDM
14
24
34
EDM
LED CH1 K1
K2
LED CH2
A2
-
Inputs configuration Solid-state output circuits (for example optical barriers) 1 channel
2 channels
+
+ ESPE (PNP)
24 VDC
EDM
-
EDM
EDM
OS1
ESPE (PNP)
24 VDC
OSSD
EDM
-
OS2
CS ME-03
EDM
EDM
OSSD1 OSSD2
OS1
OS2
CS ME-03 A2
A2
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/56
5G
Expansion module CS ME-20 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/81, shape A
Expansion module with delayed contacts at de-energizing Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • 4 delayed time 0,5 - 1 - 2 and 3 s • Small 22,5 mm housing • Output contacts: 4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 2,5 kV 250 V II 0,2 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC:
24 Vdc 10% 15% of Un < 2W
Control circuit Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
50 < 100 ms see Code structure
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 64 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-20VU24-TF1 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Releasing time on de-energisation (tR) TF05 fixed 0,5 s TF1 fixed 1 s
Data type approved by UL Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
TF2 fixed 2 s TF3 fixed 3 s Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Supply from remote class 2 source or limited voltage and limited energy.
5/57
General Catalog 2013-2014
5G Expansion module CS ME-20 Operations diagram
Terminals layout
17
27
37
Y1 A1/A2 A1
47
55
65 Y1/Y2 17/18, 27/28, 37/38, 47/48 55/56, 65/66
CH1 CH2
tA
A2 48 18
28
38
56
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply (see “Code structure”)
66
Y2
Internal wiring diagram + A1
LED CH1
17
27
37
47
55
65
Y1
18
28
38
48
56
66
Y2
C1 K1
LED CH2
C2
K2
A2
-
Inputs configuration 1 channel control
2 channels control
+
+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-20 Expansion module
14
-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-20 Expansion module
A1
A2
-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/58
5G
Expansion module CS ME-30 / CS ME-31 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/82, shape C
Expansion module with delayed contacts at de-energizing Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • Fixed or adjustable delayed time • 45 mm housing • Output contacts: 4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 2,5 kV 250 V II 0,4 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC:
24 Vdc 10% 15% of Un < 2W
Control circuit Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
50 < 200 ms see Code structure
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 64 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-30VU24-TF1 Fixed or adjustable time 0
Fixed time
1
Adjustable time
Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
5/59
Releasing time on de-energisation (tR) fixed 1 s TF1 (CS ME-30 only) ... ......... fixed 12 s TF12 (CS ME-30 only) from 1 to 12 s, step 1 s TS12 (CS ME-31 only)
Data type approved by UL Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Supply from remote class 2 source or limited voltage and limited energy.
General Catalog 2013-2014
5G Expansion module CS ME-30 / CS ME-31 Operations diagram
Terminals layout 17
27
37
Y1
17
27
37
Y1
A1
47
55
65
A1
47
55
65
A1/A2
ITALY
ITALY
POWER
POWER
CH1
CH1
CH2
CH2
A2 48
56
66
A2 48
56
66
18
38
Y2
18
38
Y2
28
Y1/Y2 17/18, 27/28, 37/38, 47/48
28
CS ME-30
55/56, 65/66
tA
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply (see “Code structure”)
CS ME-31
Release time selection tR (CS ME-31 only) DIP SWITCH
Internal wiring diagram + 17
A1
LED CH1
27
47
37
55
65
Y1
C1 K1
LED CH2
C2
K2
18
A2
28
38
48
56
66
Y2
-
tR (s)
ON OFF
1
ON OFF
2
ON OFF
3
ON OFF
4
ON OFF
5
ON OFF
6
ON OFF
7
ON OFF
8
ON OFF
9
ON OFF
10
ON OFF
11
ON OFF
12
Inputs configuration 1 channel control
2 channels control
+
+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-30 / CS ME-31 Expansion module
14
-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-30 / CS ME-31 Expansion module
A1
A2
-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/60
Expansion module CS ME-01 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/81, shape A
Expansion modules with output contacts Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • Connection of the input channels to opposite potentials • Small 22,5 mm housing • Output contacts: 5 NO safety contacts, 1 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vac/dc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 4 kV 250 V II 0,3 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption AC: Rated power consumption DC:
24 Vac/dc; 50...60 Hz 10% 15% of Un < 5 VA < 2W
Control circuit Protection against short circuits: Operating time of PTC: Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
resistance PTC, Ih=0,5 A intervention > 100 ms, reset > 3 s 50 < 40 ms < 40 ms
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95
Markings, quality marks and certificates:
Approval UL: Approval GOST:
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
5 NO safety contacts, 1 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 72 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-01V024 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Supply voltage 024 24 Vac/dc
Data type approved by UL 15%
Rated operating voltage (Un): Rated power consumption AC: Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vac/dc; 50...60 Hz < 5 VA < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Only for 24 Vac/dc version, supply from remote class 2 source or limited voltage and limited energy.
5/51
General Catalog 2013-2014
5G Expansion module CS ME-01 Operations diagram
Terminals layout
13
23
33
Y1 A1/A2 A1
43
53
61 Y1/Y2 13/14, 23/34, 43/44, 53/54 61/62
CH1 CH2
tA
A2 44 14
24
34
54
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply
62
Y2
Internal wiring diagram L/+ A1
13
23
33
43
53
61
Y1
14
24
34
44
54
62
Y2
LED CH1 K1
K2
LED CH2
A2
N/-
Inputs configuration 1 channel control
2 channels control
L/+
L/+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-01 Expansion module
14
N/-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-01 Expansion module
A1
A2
N/-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/52
5G
Expansion module CS ME-02 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/81, shape A
Expansion modules with output contacts Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • Connection of the input channels to opposite potentials • Small 22,5 mm housing • Output contacts: 4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 2,5 kV 250 V II 0,3 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC:
24 Vdc 10% 15% of Un < 2W
Control circuit Protection against short circuits: Operating time of PTC: Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
resistance PTC, Ih=0,5 A intervention > 100 ms, reset > 3 s 50 < 100 ms < 60 ms
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 64 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-02VU24 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Supply voltage U24 24 Vdc
Data type approved by UL 15%
Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Only for 24 Vdc version, supply from remote class 2 source or limited voltage and limited energy.
5/53
General Catalog 2013-2014
5G Expansion module CS ME-02 Operations diagram
Terminals layout
13
23
33
Y1 A1/A2 A1
43
51
61 Y1/Y2 13/14, 23/34, 33/34, 43/44 51/52, 61/62
CH1 CH2
tA
A2 44 14
24
34
52
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply
62
Y2
Internal wiring diagram + A1
13
23
33
43
51
61
Y1
14
24
34
44
52
62
Y2
LED CH1 K1
LED CH2
K2
A2
-
Inputs configuration 1 channel control
2 channels control
L/+
L/+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-02 Expansion module
14
N/-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-02 Expansion module
A1
A2
N/-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/54
5G
Expansion module CS ME-03 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/82, shape D
Expansion modules with output contacts Main functions • For safety applications up to SIL 3 / PL e • Module for solid-state output circuits (optical barriers type 2 and 4) • 2 OSSD inputs • Small 22,5 mm housing • Output contacts: 3 NO safety contacts, 1 NC feedback contact/EDM contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the solid-state output circuits) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 4 kV 250 V II 0,2 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC: Start power consumption:
24 Vdc 10% 20% of Un < 2W < 3W
Control circuit Operating time tA: Releasing time tR1:
< 40 ms < 15 ms
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
3 NO safety contacts, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 36 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-03VU24 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Supply voltage U24 24 Vdc
Data type approved by UL 15%
Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Only for 24 Vac/dc version, supply from remote class 2 source or limited voltage and limited energy.
5/55
General Catalog 2013-2014
5G Expansion module CS ME-03 Operations diagram
Terminals layout
13
23
33 EDM
OS1 A2 OS1 OS2 OS2 13/14, 23/34, 33/34 EDM/EDM
CH1 CH2
tA
tR1
Legend: tA: Operating time tR1: Releasing time 14
24
34 EDM
Internal wiring diagram + OS1
OS2
13
23
33
EDM
14
24
34
EDM
LED CH1 K1
K2
LED CH2
A2
-
Inputs configuration Solid-state output circuits (for example optical barriers) 1 channel
2 channels
+
+ ESPE (PNP)
24 VDC
EDM
-
EDM
EDM
OS1
ESPE (PNP)
24 VDC
OSSD
EDM
-
OS2
CS ME-03
EDM
EDM
OSSD1 OSSD2
OS1
OS2
CS ME-03 A2
A2
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/56
5G
Expansion module CS ME-20 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/81, shape A
Expansion module with delayed contacts at de-energizing Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • 4 delayed time 0,5 - 1 - 2 and 3 s • Small 22,5 mm housing • Output contacts: 4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 2,5 kV 250 V II 0,2 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC:
24 Vdc 10% 15% of Un < 2W
Control circuit Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
50 < 100 ms see Code structure
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 64 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-20VU24-TF1 Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
Releasing time on de-energisation (tR) TF05 fixed 0,5 s TF1 fixed 1 s
Data type approved by UL Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
TF2 fixed 2 s TF3 fixed 3 s Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Supply from remote class 2 source or limited voltage and limited energy.
5/57
General Catalog 2013-2014
5G Expansion module CS ME-20 Operations diagram
Terminals layout
17
27
37
Y1 A1/A2 A1
47
55
65 Y1/Y2 17/18, 27/28, 37/38, 47/48 55/56, 65/66
CH1 CH2
tA
A2 48 18
28
38
56
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply (see “Code structure”)
66
Y2
Internal wiring diagram + A1
LED CH1
17
27
37
47
55
65
Y1
18
28
38
48
56
66
Y2
C1 K1
LED CH2
C2
K2
A2
-
Inputs configuration 1 channel control
2 channels control
+
+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-20 Expansion module
14
-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-20 Expansion module
A1
A2
-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/58
5G
Expansion module CS ME-30 / CS ME-31 Technical data Housing Made of polyamide PA 6.6 self-extinguishing, class V0 (UL94) Protection degree: IP40 (housing), IP20 (terminals) Dimensions: see page 5/82, shape C
Expansion module with delayed contacts at de-energizing Main functions • For safety applications up to SIL 3 / PL e • Possibility of control with 1 or 2 channels • Fixed or adjustable delayed time • 45 mm housing • Output contacts: 4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact • Supply voltages: 24 Vdc
Utilization categories Alternate current: AC15 (50...60 Hz) Ue (V) 230 Ie (A) 3 Direct current: DC13 (6 operations/minute) Ue (V) 24 Ie (A) 4 Markings, quality marks and certificates:
Approval UL: Approval GOST:
E131787 POCC IT.AB24.B04512
Complying with the requirements requested by: Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, Electromagnetic Compatibility 2004/108/EC
General data SIL level (SIL CL): Performance Level (PL): Safety category: Safety parameters: Ambient temperature: Mechanical endurance: Electrical endurance: Pollution degree: Rated impulse with stand voltage (Uimp): Rated insulation voltage (Ui): Over-voltage category: Weight:
up to SIL 3 according to EN IEC 62061 up to PL e according to EN ISO 13849-1 up to cat. 4 according to EN ISO 13849-1 (dependent on the base module) see page 7/34 -25°C...+55°C >10 millions of operations >100.000 operations outside 3, inside 2 2,5 kV 250 V II 0,4 kg
Power supply Rated operating voltage (Un): Max residual ripple in DC: Supply voltage tolerance: Rated power consumption DC:
24 Vdc 10% 15% of Un < 2W
Control circuit Max input resistance: Operating time tA: Releasing time in absence of power supply tR:
50 < 200 ms see Code structure
In conformity with standards: IEC 60947-1, EN 60947-5-1, IEC 60204-1, EN 60204-1, EN ISO 13849-1, EN 999, EN 1037, EN ISO 12100-1, EN ISO 12100-2, EN ISO 13850, IEC 529, EN 60529, EN 61000-6-2, EN 61000-6-3, EN 62326-1, EN 60664-1, EN 60947-5-1, EN 62061, EN 13849-1, UL 508, CSA C22.2 n° 14-95 Output circuit Output contacts: Contacts type: Contacts material: Max switching voltage: Max switching current per contact: Conventional free air thermal current Ith: Max currents sum Σ Ith2: Min. current: Contacts resistance: Contact protection fuse:
4 NO safety contacts, 2 NC auxiliary contact, 1 NC feedback contact forced guided contacts silver alloy, gold plated 230/240 Vac; 300 Vdc 6A 6A 64 A2 10 mA 100 m 6 A, F type
Code structure
CS ME-30VU24-TF1 Fixed or adjustable time 0
Fixed time
1
Adjustable time
Kind of connection V
screw terminals
M
connector with screw terminals
X
connector with spring terminals
5/59
Releasing time on de-energisation (tR) fixed 1 s TF1 (CS ME-30 only) ... ......... fixed 12 s TF12 (CS ME-30 only) from 1 to 12 s, step 1 s TS12 (CS ME-31 only)
Data type approved by UL Rated operating voltage (Un): Rated power consumption DC: Max switching voltage: Max switching current per contact: Utilization category
24 Vdc < 2W 230 Vac 6A C300
Notes: - Use 60° or 75 °C copper (Cu) conductor and wire size No. 30-12 AWG. - Terminal tightening torque of 5-7 Lb In. - Supply from remote class 2 source or limited voltage and limited energy.
General Catalog 2013-2014
5G Expansion module CS ME-30 / CS ME-31 Operations diagram
Terminals layout 17
27
37
Y1
17
27
37
Y1
A1
47
55
65
A1
47
55
65
A1/A2
ITALY
ITALY
POWER
POWER
CH1
CH1
CH2
CH2
A2 48
56
66
A2 48
56
66
18
38
Y2
18
38
Y2
28
Y1/Y2 17/18, 27/28, 37/38, 47/48
28
CS ME-30
55/56, 65/66
tA
tR
Legend: tA: Operating time tR: Releasing time in absence of power supply (see “Code structure”)
CS ME-31
Release time selection tR (CS ME-31 only) DIP SWITCH
Internal wiring diagram + 17
A1
LED CH1
27
47
37
55
65
Y1
C1 K1
LED CH2
C2
K2
18
A2
28
38
48
56
66
Y2
-
tR (s)
ON OFF
1
ON OFF
2
ON OFF
3
ON OFF
4
ON OFF
5
ON OFF
6
ON OFF
7
ON OFF
8
ON OFF
9
ON OFF
10
ON OFF
11
ON OFF
12
Inputs configuration 1 channel control
2 channels control
+
+ Manual and monitored start wiring
Manual and monitored start wiring
F
F
Automatic start wiring
13
Automatic start wiring
Y1
Start, reset and/or feedback input Base module
23
Y2
13
CS ME-30 / CS ME-31 Expansion module
14
-
A1
Y1
Start, reset and/or feedback input Base module
A2
24
14
Y2
CS ME-30 / CS ME-31 Expansion module
A1
A2
-
The diagram does not show the exact position of clamps in the product
General Catalog 2013-2014
5/60
