Plantronics CS50 Headset Synchronization

Plantronics CS50 Headset Synchronization

Plantronics CS50 Headset Synchronization This guide will show you how to synchronize the headset to the base.

Written By: Joe

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Plantronics CS50 Headset Synchronization

INTRODUCTION The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Plantronics CS50 Headset Synchronization

Step 1 — Plantronics CS50 Headset Synchronization 

Ensure the headset is in the base's cradle.



Press the volume control buttons on the back of the base until the front of the base flashes red.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Plantronics CS50 Headset Synchronization

Step 3 

Press the mute switch on top of the headset until the green light on the headset turns on.

Step 4



Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Plantronics CS50 Headset Synchronization

Step 5 

When the flashing red light becomes solid, synchronization is complete.

This document was last generated on 2017-06-18 07:31:57 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5