PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement Written By: ZFix
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
INTRODUCTION PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck). Please SUBSCRIBE to my channel ツ
[video: https://www.youtube.com/watch?v=VwWaRIjCndw] More info about disassembling, you can find in PlayStation 3 Slim Teardown
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 1 — Laser Unit (Laser and Mechanism)
Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
Step 2
Remove Power Supply.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 3
Separate cables, unscrew the screw and remove the Blu Ray drive.
Step 4
Disassemble the upper metal shield.
.
Please SUBSCRIBE to my channel ツ
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 5
Remove the two very small phillips screws in each lower corner referenced by the red circles.
Step 6
Be careful with flex cables.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 7
Now you can remove the Laser Deck.
Step 8
Transfer two flex cables and 2x rubbers.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 9
You can test the console before full assembling.
.
Did you do it successfully?
Please SUBSCRIBE to my channel ツ To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 09:56:44 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement Written By: ZFix
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
INTRODUCTION PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck). Please SUBSCRIBE to my channel ツ
[video: https://www.youtube.com/watch?v=VwWaRIjCndw] More info about disassembling, you can find in PlayStation 3 Slim Teardown
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 1 — Laser Unit (Laser and Mechanism)
Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
Step 2
Remove Power Supply.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 3
Separate cables, unscrew the screw and remove the Blu Ray drive.
Step 4
Disassemble the upper metal shield.
.
Please SUBSCRIBE to my channel ツ
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 5
Remove the two very small phillips screws in each lower corner referenced by the red circles.
Step 6
Be careful with flex cables.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 7
Now you can remove the Laser Deck.
Step 8
Transfer two flex cables and 2x rubbers.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement
Step 9
You can test the console before full assembling.
.
Did you do it successfully?
Please SUBSCRIBE to my channel ツ To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 09:56:44 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
