PowerBook G3 Lombard Heat Shield Replacement
PowerBook G3 Lombard Heat Shield Replacement
PowerBook G3 Lombard Heat Shield Replacement Written By: iRobot
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
PowerBook G3 Lombard Heat Shield Replacement
INTRODUCTION Removing the heat shield enables access to the RAM and the processor below.
TOOLS:
PARTS:
Phillips #0 Screwdriver (1)
G3 Lombard Heat Shield (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
PowerBook G3 Lombard Heat Shield Replacement
Step 1 — Keyboard
Turn the computer so that the ports are facing you.
If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.
Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
Step 2
Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
PowerBook G3 Lombard Heat Shield Replacement
Step 3
Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
In order to replace the keyboard, you must first remove the modem.
Step 4 — Heat Shield
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.
Page 4 of 5
PowerBook G3 Lombard Heat Shield Replacement
Step 5
Lift the heat shield up and pull it toward you.
Your laptop should look approximately like this.
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 08:45:08 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
PowerBook G3 Lombard Heat Shield Replacement Written By: iRobot
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
PowerBook G3 Lombard Heat Shield Replacement
INTRODUCTION Removing the heat shield enables access to the RAM and the processor below.
TOOLS:
PARTS:
Phillips #0 Screwdriver (1)
G3 Lombard Heat Shield (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
PowerBook G3 Lombard Heat Shield Replacement
Step 1 — Keyboard
Turn the computer so that the ports are facing you.
If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.
Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
Step 2
Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
PowerBook G3 Lombard Heat Shield Replacement
Step 3
Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
In order to replace the keyboard, you must first remove the modem.
Step 4 — Heat Shield
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.
Page 4 of 5
PowerBook G3 Lombard Heat Shield Replacement
Step 5
Lift the heat shield up and pull it toward you.
Your laptop should look approximately like this.
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 08:45:08 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
