PowerBook G4 Titanium Mercury Keyboard Replacement

PowerBook G4 Titanium Mercury Keyboard Replacement

PowerBook G4 Titanium Mercury Keyboard Replacement Written By: iRobot

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

PowerBook G4 Titanium Mercury Keyboard Replacement

INTRODUCTION Replacing this keyboard is easy. It requires no tools, and takes only a few minutes.

PARTS: G4 Titanium Mercury Keyboard (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

PowerBook G4 Titanium Mercury Keyboard Replacement

Step 1 — Keyboard 

Remove the battery.



Turn the keyboard locking screw so that it is parallel to the space bar.



Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.



Rest the keyboard face down on the trackpad area.



Disconnect the keyboard connector from the logic board.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

PowerBook G4 Titanium Mercury Keyboard Replacement

Step 3 

Your laptop should look approximately like this.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 02:27:13 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4