POWERFUL & PROVEN
INVERTER TIG
TIG SOUND AC-DC 2240/M Part No. 365
POWERFUL & PROVEN The new 220Amp 240V single phase Tig Sound AC-DC 2240/M has an exceptionally high power to weight ratio. It boasts 160A @ 100% duty cycle while weighing in at only 21.5kg.
220 Amp MAX Duty Cycle
160Amps @100%
AC DC
Single Phase
Cebora’s attention to detail and being easy to use makes this machine stand out. The start current of just 5 Amps displays the machines ability for control and coupled with the tungsten balling system and pulse ensures great weld outcomes.
LEADING EDGE INVERTER TECHNOLOGY is used to deliver exceptional pulse arc characteristics allowing the operator to achieve outstanding weld results on such a wide range of parent metals.
PULSE TIG allows the operator to weld thin materials decreasing the heat affected zone on the parent metal and reducing metal fatigue adjacent to the weld.
THE ‘POWER FACTOR CORRECTION’ innovation is included on this machine enables the power source to tolerate supply/input voltage fluctuations of +15% over voltage and -20% under voltage, protecting the power source from power spikes, drops and surges thus protecting the equipment and delivering consistent weld output.
Power Factor Correction
Substantial Energy Savings
Supply Voltage Tolerance (+15%/-20%)
TUNGSTEN BALLING SYSTEM
Sharpened 2.4mm tungsten before welding
This new advance in AC Tig welding significantly reduces the AC arc width giving the operator more control & delivering a petite weld bead without white oxidization either side of the weld. How? a) sharpen a 2.4mm zirconiated tungsten to a pencil point b) program the machines tungsten balling system for the diameter ball needed i.e. 1mm c) start welding with new control!
The 1mm Ball the TBS has made on the Tungsten
www.cebora.com | [email protected] | 1800 232 672
TIG SOUND AC-DC 2240/M
SUITABLE FOR
Mild steel, Stainless steel, Aluminium, Copper & Brass
FEATURES • • • • • • • • • • • • •
• • • • •
5-220 Amp AC/DC TIG 240V Single Phase Duty Cycle - 160A @ 100% Only 21.5kg Large 35-50 panel connectors 10 pin Amphenol plug for torch or remote foot control High Frequency Start Lift arc start option Pulse & pulse frequency adjustment. Digital amps and volts display AC Hertz adjustment to refine/narrow up the arc.50 Hz to 150 Hz AC Wave Balance adjustment for penetration & cleaning. Tungsten Balling System (TBS) for Aluminium Welding (see over page) - sharpen your zirconiated tungsten to a point & program the machines tungsten balling system for the diameter ball needed. ie. you have a 2.4mm sharpened tungsten, set the diameter for a 1mm ball and start welding. Up slope & down slope/crater fill. Main weld current & background weld current adjustment. Pre gas & Post gas. Stored job memory facility. PFC (Power factor correction) System - Substantial energy savings with the ability to tolerate a wide fluctuation in supply voltage (+15% / -20%).
Optional Trolley (1656)
OPTIONAL ITEMS • • • • •
Trolley (1656) Foot Control (193) Water Cooler (1341) Torches 4m, 8m, & 16m Torches water cooled or air cooled
Optional Water Cooler (1341)
APPLICATIONS
PROCESSES
SPECIFICATIONS
BOAT BUILDING
AC TIG WELDING
GENERAL FABRICATION
DC TIG WELDING
SINGLE PHASE INPUT
240V (+ 15% / -20%)
ALUMINIUM FABRICATION
PULSED TIG WELDING
FUSE RATING (SLOW BLOW)
16 A
STAINLESS FABRICATION
STICK WELDING (MMA)
ON-SITE FABRICATION
TIG
INPUT POWER AMPERAGE RANGE DUTY CYCLE (10 MIN.40°C) According to IEC 60974.1
Sold by / Available from:
MMA
5.6 KVA 40% 4.2 KVA 60% 3.6 KVA 100%
6.6 KVA 30% 4.8 KVA 60% 3.6 KVA 100%
5A - 220A
10A - 180A
220A 40% 180A 60% 160A 100%
180A 30% 140A 60% 110A 100%
PROTECTION CLASS
IP 23 S
WEIGHT
21.5 Kg
DIMENSIONS mm
207 x 545 x 411H
www.cebora.com | [email protected] | 1800 232 672
TIG SOUND AC-DC 2240/M Part No. 365
POWERFUL & PROVEN The new 220Amp 240V single phase Tig Sound AC-DC 2240/M has an exceptionally high power to weight ratio. It boasts 160A @ 100% duty cycle while weighing in at only 21.5kg.
220 Amp MAX Duty Cycle
160Amps @100%
AC DC
Single Phase
Cebora’s attention to detail and being easy to use makes this machine stand out. The start current of just 5 Amps displays the machines ability for control and coupled with the tungsten balling system and pulse ensures great weld outcomes.
LEADING EDGE INVERTER TECHNOLOGY is used to deliver exceptional pulse arc characteristics allowing the operator to achieve outstanding weld results on such a wide range of parent metals.
PULSE TIG allows the operator to weld thin materials decreasing the heat affected zone on the parent metal and reducing metal fatigue adjacent to the weld.
THE ‘POWER FACTOR CORRECTION’ innovation is included on this machine enables the power source to tolerate supply/input voltage fluctuations of +15% over voltage and -20% under voltage, protecting the power source from power spikes, drops and surges thus protecting the equipment and delivering consistent weld output.
Power Factor Correction
Substantial Energy Savings
Supply Voltage Tolerance (+15%/-20%)
TUNGSTEN BALLING SYSTEM
Sharpened 2.4mm tungsten before welding
This new advance in AC Tig welding significantly reduces the AC arc width giving the operator more control & delivering a petite weld bead without white oxidization either side of the weld. How? a) sharpen a 2.4mm zirconiated tungsten to a pencil point b) program the machines tungsten balling system for the diameter ball needed i.e. 1mm c) start welding with new control!
The 1mm Ball the TBS has made on the Tungsten
www.cebora.com | [email protected] | 1800 232 672
TIG SOUND AC-DC 2240/M
SUITABLE FOR
Mild steel, Stainless steel, Aluminium, Copper & Brass
FEATURES • • • • • • • • • • • • •
• • • • •
5-220 Amp AC/DC TIG 240V Single Phase Duty Cycle - 160A @ 100% Only 21.5kg Large 35-50 panel connectors 10 pin Amphenol plug for torch or remote foot control High Frequency Start Lift arc start option Pulse & pulse frequency adjustment. Digital amps and volts display AC Hertz adjustment to refine/narrow up the arc.50 Hz to 150 Hz AC Wave Balance adjustment for penetration & cleaning. Tungsten Balling System (TBS) for Aluminium Welding (see over page) - sharpen your zirconiated tungsten to a point & program the machines tungsten balling system for the diameter ball needed. ie. you have a 2.4mm sharpened tungsten, set the diameter for a 1mm ball and start welding. Up slope & down slope/crater fill. Main weld current & background weld current adjustment. Pre gas & Post gas. Stored job memory facility. PFC (Power factor correction) System - Substantial energy savings with the ability to tolerate a wide fluctuation in supply voltage (+15% / -20%).
Optional Trolley (1656)
OPTIONAL ITEMS • • • • •
Trolley (1656) Foot Control (193) Water Cooler (1341) Torches 4m, 8m, & 16m Torches water cooled or air cooled
Optional Water Cooler (1341)
APPLICATIONS
PROCESSES
SPECIFICATIONS
BOAT BUILDING
AC TIG WELDING
GENERAL FABRICATION
DC TIG WELDING
SINGLE PHASE INPUT
240V (+ 15% / -20%)
ALUMINIUM FABRICATION
PULSED TIG WELDING
FUSE RATING (SLOW BLOW)
16 A
STAINLESS FABRICATION
STICK WELDING (MMA)
ON-SITE FABRICATION
TIG
INPUT POWER AMPERAGE RANGE DUTY CYCLE (10 MIN.40°C) According to IEC 60974.1
Sold by / Available from:
MMA
5.6 KVA 40% 4.2 KVA 60% 3.6 KVA 100%
6.6 KVA 30% 4.8 KVA 60% 3.6 KVA 100%
5A - 220A
10A - 180A
220A 40% 180A 60% 160A 100%
180A 30% 140A 60% 110A 100%
PROTECTION CLASS
IP 23 S
WEIGHT
21.5 Kg
DIMENSIONS mm
207 x 545 x 411H
www.cebora.com | [email protected] | 1800 232 672
