Presenting the NuTone EZFit⢠Ventilation Fan
EZFit™ Ventilation Fan
Presenting the NuTone EZFit Ventilation Fan ™
Quickly replace existing ventilation fans from the room-side with new EZLock tabs ™
Eliminate foggy mirrors, moisture, and odors faster than typical existing fans.
Enjoy a more comfortable and relaxing environment than typical existing fans provide.
* Installed performance compared to typical installed fans.
MAY 2014
EZFit offers a variety of features that make installation from the room-side a breeze. ™
• EZLock™ Tabs secure the fan directly to the ceiling drywall, eliminating joist or truss mounting. • EZConnect™ wiring connectors eliminate clumsy wire nuts. • EZDuct™ connector enables duct attachment from inside the housing, without going into the attic.
• EZFit’s slim housing design fits in virtually all ceiling spaces. • 80 CFM and a quiet 1.1 Sones. • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit.
Model EZ80N • Housing: 12"L x 10-1/2"W x 5"H • Grille: 14-1/2"L x 13"W • Duct Connector: 4" oval or 3" round (transition provided)
• Patent-pending design.
• EZHold™ pre-installed blower attachment screws mean no third hand is needed.
EZ Installation in four simple steps
1
Insert housing from roomside and rotate EZLock tabs outward by turning the screw.
2
EZLock tabs provide firm pressure contact to secure the fan to the drywall (view shown is from above).
3
Re-attach the duct and wiring from the room-side.
4
Insert and secure the blower into the housing.
Model CFM Sones Ducting EZ80N 80 1.1 4" oval or 3" round
NuTone.com Broan-NuTone LLC, 926 W. State Street Hartford, WI 53027 • 888-336-3948 In Canada call 877-896-1119
©2014 Broan-NuTone LLC | Printed in USA | 05/14 99850943
Presenting the NuTone EZFit Ventilation Fan ™
Quickly replace existing ventilation fans from the room-side with new EZLock tabs ™
Eliminate foggy mirrors, moisture, and odors faster than typical existing fans.
Enjoy a more comfortable and relaxing environment than typical existing fans provide.
* Installed performance compared to typical installed fans.
MAY 2014
EZFit offers a variety of features that make installation from the room-side a breeze. ™
• EZLock™ Tabs secure the fan directly to the ceiling drywall, eliminating joist or truss mounting. • EZConnect™ wiring connectors eliminate clumsy wire nuts. • EZDuct™ connector enables duct attachment from inside the housing, without going into the attic.
• EZFit’s slim housing design fits in virtually all ceiling spaces. • 80 CFM and a quiet 1.1 Sones. • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit.
Model EZ80N • Housing: 12"L x 10-1/2"W x 5"H • Grille: 14-1/2"L x 13"W • Duct Connector: 4" oval or 3" round (transition provided)
• Patent-pending design.
• EZHold™ pre-installed blower attachment screws mean no third hand is needed.
EZ Installation in four simple steps
1
Insert housing from roomside and rotate EZLock tabs outward by turning the screw.
2
EZLock tabs provide firm pressure contact to secure the fan to the drywall (view shown is from above).
3
Re-attach the duct and wiring from the room-side.
4
Insert and secure the blower into the housing.
Model CFM Sones Ducting EZ80N 80 1.1 4" oval or 3" round
NuTone.com Broan-NuTone LLC, 926 W. State Street Hartford, WI 53027 • 888-336-3948 In Canada call 877-896-1119
©2014 Broan-NuTone LLC | Printed in USA | 05/14 99850943
