prestige series
PRESTIGE STEEL HOPPERS
TANDEM TRI-AXLE SUPER-B
01_
— LODE KING. IT’S ALL IN THE DETAILS.
02_
01
03_
05_ 04_
HOPPER / PRESTIGE SERIES
02_
03_
04_
SLOPE SHEET ANGLES
HOPPER CLEARANCE
CHUTE OPENING SIZE
WALL CORRUGATION
With a minimum of 30° slopes, hoppers easily clean out without the need to sweep.
High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility.
The 16" × 24" chute enables quick discharge, as well as a controlled rate of flow into an unloading auger.
A three-stage paint process consisting of a zinc coating, urethane primer and top coat keeps your trailer protected and looking great for years to come.
HIGHLIGHTS
01_
04
03 02
LODEKING.COM
02
MODELS
TANDEM
74", 77"
36', 40'
102"
DIMENSIONS
VOLUME (CU. FT.)
LENGTH
36' or 40'
KING PIN
24" Standard, 18" Optional
WALL HEIGHT
EXTERIOR WIDTH
102"
OVERALL HEIGHT
134" w/ 74" Wall, 137" w/ 77" Wall
INTERIOR WIDTH
98"
SLOPES
Minimum 30°
WALL HEIGHT
74" Standard, 77" Optional
36' LENGTH
40' LENGTH
74"
77"
74"
77"
WATER LEVEL
1570
1645
1730
1810
HEAPED
1680
1755
1860
1942
TRI-AXLE
80" / 84"
45'
102"
DIMENSIONS 45' – 2 Hopper Standard; 45' – 3 Hopper Optional
KING PIN
EXTERIOR WIDTH
102"
OVERALL HEIGHT
140" w/ 80" Wall, 144" w/ 84" Wall
INTERIOR WIDTH
98"
SLOPES
Minimum 29.5°
WALL HEIGHT
2 Hopper – 80" Standard w/ 84"Option; 3 Hopper – 80" Only
LENGTH
03
VOLUME (CU. FT.) 2 Hopper – 15" Standard; 3 Hopper – 18" Standard
HOPPER / PRESTIGE SERIES
2 HOPPER
3 HOPPER
WALL HEIGHT
80"
84"
80"
WATER LEVEL
1770
1880
1990
HEAPED
1930
2040
2156
SUPER-B
79" / 82" / 85"
28'6"
30" / 28'6"
102"
VOLUME (CU. FT.)
DIMENSIONS LENGTH
Lead 28'6", Pull 30' Standard; Lead 28'6", Pull 28'6" Option
EXTERIOR WIDTH
102"
INTERIOR WIDTH
97.75"
WALL HEIGHT
79" Standard; 82" or 85" Optional
KING PIN
Lead – 30" Standard, 24" Option; Pull – 15" Standard
OVERALL HEIGHT
142" w/ 82" Wall; 139" w/ 79" Wall; 145" w/ 85" Wall
SLOPES
Minimum 30°
WALL HEIGHT
LEAD
PULL
TOTAL
-
WATER LEVEL
HEAPED
WATER LEVEL
HEAPED
WATER LEVEL
HEAPED
79"
1264
1373
1281
1396
2544
2769
82"
1320
1430
1340
1456
2661
2885
85"
1377
1487
1400
1515
2777
3002
79"
1264
1360
1190
1299
2453
2659
82"
1320
1436
1247
1356
2567
2792
85"
1377
1512
1303
1412
2680
2924
LEAD 28'6", PULL 30'
LEAD 28'6", PULL 28'6"
— REFINED PERFORMANCE.
04
— TRUSTED FOR MILLIONS OF MILES.
STANDARD FEATURES
AIR & ELECTRICAL LINES
CHUTE CRANKS
EXTRA-WIDE MUDFLAPS
HENDRICKSON SUSPENSION
HOPPER ACCESS
Each line is easily identifiable and easy to track. All lines are safely routed through side rails and secured front and back.
High-mounted, angled chute cranks make access easier.
Four-across, full coverage 102" wide mudflaps ahead of landing gear.
The Hendrickson INTRAAX air-ride suspension combines the axle and suspension as a fully integrated unit. The larger diameter 5 3/4" axle provides superior rigidity.
The front and rear are equipped with ladders to provide access to each hopper. Interior steps allow the operator into the hopper and a ladder on either side of the divider wall allows movement between the hoppers.
ALUMINUM FILL PLATE
AUXILIARY AIR SUPPLY
DUAL CHUTE OPENING
ELECTRIC REMOTE TARP OPENER
FRONT FENDER
Aluminum fill plate in bumper with Lode King logo.
An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure. up to recommended PSI.
A second chute opening shaft and crank on the opposite side from the primary chute opening.
Electric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box.
The front fender protects the area above the king pin section from road grime and snow buildup.
OPTIONAL FEATURES
07
HOPPER / PRESTIGE SERIES
FEATURES IN-LINE AIR FILTER
LOAD GAUGE ENCLOSURE
SELF-CLEANING CHUTE
TARP BOWS
UPPER COUPLER
The in-line air filter protects the air system from road debris build-up. The filter is serviceable and replaceable. Extends the duration of the ABS warranty.
The easily accessible air gauge box is positioned above the fenders to protect it from flying road debris.
The sliding track for the chute gate is designed to be self-cleaning. The chute itself slides past the fully open trap for complete clean-out.
The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow.
The upper coupler design is one of the most robust in the industry.
VIEW ALL OPTIONS AT LODEKING.COM
SIDEWALL VENTS
TIRE INFLATION SYSTEM
Vents allow air to flow into the trailer during unloading.
Hendrickson TIREMAAX PRO
TOW HOOKS Tow hooks are welded into place as an integral part of the rear sub-frame assembly.
LODEKING.COM
VIBRATOR BRACKETS
WHEELS
Vibrator brackets are mounted to the hopper.
24.5" option available in aluminum or steel.
08
TANDEM
PRESTIGE 40' TANDEM
36' TANDEM 36'0" 10.97m SHOWN 40' [12.19m] OPTION 220 3/8" W/ 36' TRAILER 244 3/8" W/ 40' TRAILER
40'0" 12.19m 232 7/8"
111"
111 1/4"
77" SHOWN 74" OPTION
30° 33° 24" KP SHOWN 18" KP OPTION
49"
30°
33°
137" W/ 77" WALL 134" W/ 74" WALL
33°
33°
135" 74" SHOWN 71" OPTION W/ 74" WALL 132" 77" OPTION 84" OPTION W/ 71" WALL 138" W/ 77" WALL 145" W/ 84" WALL
33°
33°
24" KP SHOWN 18" KP OPTION
49"
23"
23"
11R24.5
151" W/ 432" SHOWN 199" W/ 480" OPTION
49"
175 1/8" ALL CHUTES 16" WIDE X 24" LONG
28"
11R24.5
72"
28"
32'8 3/16" 9.96m WHEELBASE
ALL CHUTES 16" WIDE X 24" LONG
TRI-AXLE
29'7 1/2" 9.03m WHEELBASE /W 36' 33'7 1/2" [10.24m] WHEELBASE /W 40'
45' TRI-AXLE 3-HOPPER
45' TRI-AXLE 2-HOPPER
45'0" 13.72m 294"
45'0" 13.72m
204 1/8"
263 7/16"
112 3/8"
141 3/16"
33°
29.5°
33°
33°
80" SHOWN 84" OPTION
15" KP
49"
80"
140" W/ 80" WALL 144" W/ 84" WALL
29.5°
30°
49"
18" KP
23"
23" 163"
ALL CHUTES 16" WIDE X 24" LONG
60"
60"
SUPER-B
60"
60"
27"
ALL CHUTES 16" WIDE X 24" LONG 36'3" 11.05m WHEELBASE
28'6" LEAD & 28'6" PULL
28'6" LEAD & 30' PULL
61'5" 18.72m
61'-5 1/2" 18735mm 2'11 5/8" 0.90m
28'6" 8.69m
4'5" 1.35m
30'0" 9.14m
187 1/8"
28'6" 8.69m
189 9/16"
112 1/2"
30°
112 3/8"
30°
33°
30°
30" KP SHOWN 24" KP OPTION
82" SHOWN 141 1/2" 79" OPTION W/ 82" WALL 85" OPTION 138 1/2" W/ 79" WALL 144 1/2" W/ 85" WALL
OPTION ALL CHUTES ALL CHUTES 16" WIDE X 24" LONG 24" WIDE X 32" LONG
29'3 1/2" 9.08m WHEELBASE
50" 61"
61"
117 5/16" 15" KP
30°
49"
11R24.5
28'6" 8.69m 180 1/2"
188"
114" 15" KP
23" 116 3/4"
11R24.5
115"
27"
11R24.5
36'6 3/16" 11.13m WHEELBASE
49"
140"
30°
33°
30" KP SHOWN 24" KP OPTION
30°
82" SHOWN 141" 79" OPTION W/ 82" WALL 85" OPTION 138" W/ 79" WALL 144" W/ 85" WALL
23"
115 3/16" 116 3/4"
18'2 1/8" 5.54m 24'4 5/8" 7.43m WHEELBASE
49"
28"
11R24.5
ALL CHUTES 16" WIDE X 24" LONG
32 1/2" 61"
29'3 1/2" 9.08m WHEELBASE
Lode King Industries is a division of Triple E Canada Ltd. Product improvement is an ongoing process a Lode King Industries. Thus we reserve the right to change any specifications or components on any specifications or components on any or all products without prior notice; errors or omissions excepted. Lode King Industries is under no obligation to undertake modifications to units manufactured prior to changes in specifications. Printed in Canada. 06/17.
61"
97 1/8" 18'1 1/2" 5.52m
49"
28"
22'10 5/8" 6.98m WHEELBASE
LODEKING.COM
SPECIFICATIONS
BODY STRUCTURE COUPLER
Holland Fifth Wheel Standard; Other Options Available
HOPPER CHUTES
Standard Opening Size – 24" Long × 16" Wide; Roadside Opener Standard; 23 1/4" Clearance (w/ 11Rx24.5 Rubber); Other Options Available
HOPPERS
14 Gauge Steel; Overlapped Corners; Two Rows of Stiffeners on All Sides; Full Height Steel Divider Wall between Hoppers; Other Options Available
LANDING GEAR
Holland Mark V, Two Speed
LIGHTING
Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; Other Options Available
MUD FLAPS
1/2" Rubber Anti-Sail Rear Flaps Standard; Other Options Available
PAINT
All Steel Components, Coupler Frame and Suspension Frame. ThreeStage Paint Process Consisting of a Coating of Zinc, Urethane Primer and Top Coat.
SIDE WALLS
Corrugated 16 Gauge Steel Side Walls w/ 14 Gauge in High Stress Areas; Other Options Available
SLOPES
Aluminum Slope Sheets – .063 Thickness, Available in Black, White or Unpainted; No Less than 29.5°
TARPS/TARP SUPPORTS
Michel's Roll Tarp, Reinforced over Roof Bows; Fiberglass Ridge Pole; Aluminum Roof Bows; Aluminum End Caps; Remote Openers; Other Options Available
RUNNING GEAR
09
AXLES
Hendrickson INTRAAX .31" Wall, 5 3/4" Round, 77 1/2" Track, HN Spindle; Other Options Available
BRAKE SYSTEM
Air Drum Brake Standard; HXS-H23 Extended Service Linings Standard; Haldex 30/30 Gold Seal; Haldex S-ABA Slack 5 1/2"; 28 Spline Standard; Meritor Wabco ABS Equipped; Other Options Available
FENDERS
Lode King Checkered Aluminum Flat Fenders; Other Options Available
HUBS
10 Stud HP Cast Hub/Cast Drum Standard; Other Options Available
SUSPENSION
Hendrickson INTRAAX AANT23K LDA Air Ride Standard; Air Gauge Mounted in an Aluminum Box c/w Window and Light; Other Options Available
TIRES
Michelin/BF Goodrich Standard; Other Options Available
WHEEL SEALS
National
WHEELS
22.5" Standard; Other Options Available
HOPPER / PRESTIGE SERIES
— WITH YOU FOR THE LONG HAUL.
FOR MORE THAN 35 YEARS, LODE KING INDUSTRIES HAS BEEN MANUFACTURING THE FINEST TRAILERS ON THE ROAD. FROM GRAIN TRAILERS AND FLATBEDS TO SPECIALIZEDAPPLICATION TRAILERS, LODE KING’S ATTENTION TO QUALITY AND CUSTOMER CARE SIMPLY CAN’T BE MATCHED.
SOLID FOUNDATION
MADE IN CANADA
CRAFTSMANSHIP
PROUD CUSTOMERS
We’ve been proud to call Winkler, Manitoba home since 1980. Lode King has grown from humble beginnings to become Western Canada’s leading commercial trailer manufacturer. We’re building on that foundation, continually growing and innovating as our products take on new challenges year after year. Commitment to these founding principles and our dedication to future growth underpin our company’s culture and products.
Lode King understands our country’s diverse and sometimes harsh landscape. From the majestic Rockies to the big-sky prairies, we’re honoured to be Western Canada’s largest commercial trailer manufacturer. Our trailers are built to withstand Canada’s ever-changing, severe climates, while our dealer network conveniently spans coast to coast, serving our customers with a wide variety of product options.
Built tough, our no-compromise quality standards are unmatched in the transport trailer industry. Manufacturing within ISO 9001 international standards, we source and use the best materials available, from initial production steps to final finishing. Our goal is always to build a trailer that’s engineered to last, whatever our customers put it through. Every trailer is inspected and certified for quality assurance.
Lode King trailers are built for drivers who demand more in terms of style, technology, durability and features. Our customers head out on the open road with a sense of pride and have become our ambassadors at large. We never forget that every trailer has our name on it, so we maintain and value the relationships we’ve formed with fleet operators over the past 35-plus years.
CUTTING EDGE TECHNOLOGY
LONG TERM RELIABILITY
PROUD, DEDICATED AND LOYAL TEAM
CUSTOMER SERVICE: A LODE KING PRIORITY
The latest in automated laser cutting, bending and welding technologies provide the precision and consistency needed to produce top quality components. It’s innovative tools like these that help push our products to new heights and make our vision to create the best trailer possible a reality. In our world-class paint facility we also push the boundaries of the transport industry’s finishing standards.
Long term in our industry means more to Lode King than we can possibly convey. Our unwavering quest to produce the highest quality trailers has turned into decades of success for our customers. Knowing our durable trailers will withstand heavy use for years to come helps our customers purchase in total confidence. Our premium quality product means minimal downtime, which leads to more time out on the road, getting the job done.
Pride, dedication and loyalty are just part of what drives the team at Lode King Industries. We are committed to maintaining one of the cleanest and safest workspaces around, and place a high level of importance on training and development. This means that our employees are able to develop their skills, which provides both security and opportunities for career development within our growing company.
We know exactly how important communication is when you’re miles away from home. Technology and customer relations play a large role in how we provide solid service before, during, and after your purchase. As an integrated customer service team working together with our dealer network, we work hand-in-hand with our customers, pro-actively meeting their needs and maintaining the pride they feel in pulling a Lode King trailer.
LODEKING.COM
10
BOX 1146, 135 CANADA ST WINKLER, MB, CANADA, R6W 4B2 PHONE 204-325-4345 FAX 204-325-5369
LODEKING.COM Lode King Industries is a division of Triple E Canada Ltd. Product improvement is an ongoing process at Lode King Industries. Thus we reserve the right to change any specifications or components on any specifications or components on any or all products without prior notice; errors or omissions excepted. Lode-King Industries is under no obligation to undertake modifications to units manufactured prior to changes in specifications. Printed in Canada. 06/17.
TANDEM TRI-AXLE SUPER-B
01_
— LODE KING. IT’S ALL IN THE DETAILS.
02_
01
03_
05_ 04_
HOPPER / PRESTIGE SERIES
02_
03_
04_
SLOPE SHEET ANGLES
HOPPER CLEARANCE
CHUTE OPENING SIZE
WALL CORRUGATION
With a minimum of 30° slopes, hoppers easily clean out without the need to sweep.
High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility.
The 16" × 24" chute enables quick discharge, as well as a controlled rate of flow into an unloading auger.
A three-stage paint process consisting of a zinc coating, urethane primer and top coat keeps your trailer protected and looking great for years to come.
HIGHLIGHTS
01_
04
03 02
LODEKING.COM
02
MODELS
TANDEM
74", 77"
36', 40'
102"
DIMENSIONS
VOLUME (CU. FT.)
LENGTH
36' or 40'
KING PIN
24" Standard, 18" Optional
WALL HEIGHT
EXTERIOR WIDTH
102"
OVERALL HEIGHT
134" w/ 74" Wall, 137" w/ 77" Wall
INTERIOR WIDTH
98"
SLOPES
Minimum 30°
WALL HEIGHT
74" Standard, 77" Optional
36' LENGTH
40' LENGTH
74"
77"
74"
77"
WATER LEVEL
1570
1645
1730
1810
HEAPED
1680
1755
1860
1942
TRI-AXLE
80" / 84"
45'
102"
DIMENSIONS 45' – 2 Hopper Standard; 45' – 3 Hopper Optional
KING PIN
EXTERIOR WIDTH
102"
OVERALL HEIGHT
140" w/ 80" Wall, 144" w/ 84" Wall
INTERIOR WIDTH
98"
SLOPES
Minimum 29.5°
WALL HEIGHT
2 Hopper – 80" Standard w/ 84"Option; 3 Hopper – 80" Only
LENGTH
03
VOLUME (CU. FT.) 2 Hopper – 15" Standard; 3 Hopper – 18" Standard
HOPPER / PRESTIGE SERIES
2 HOPPER
3 HOPPER
WALL HEIGHT
80"
84"
80"
WATER LEVEL
1770
1880
1990
HEAPED
1930
2040
2156
SUPER-B
79" / 82" / 85"
28'6"
30" / 28'6"
102"
VOLUME (CU. FT.)
DIMENSIONS LENGTH
Lead 28'6", Pull 30' Standard; Lead 28'6", Pull 28'6" Option
EXTERIOR WIDTH
102"
INTERIOR WIDTH
97.75"
WALL HEIGHT
79" Standard; 82" or 85" Optional
KING PIN
Lead – 30" Standard, 24" Option; Pull – 15" Standard
OVERALL HEIGHT
142" w/ 82" Wall; 139" w/ 79" Wall; 145" w/ 85" Wall
SLOPES
Minimum 30°
WALL HEIGHT
LEAD
PULL
TOTAL
-
WATER LEVEL
HEAPED
WATER LEVEL
HEAPED
WATER LEVEL
HEAPED
79"
1264
1373
1281
1396
2544
2769
82"
1320
1430
1340
1456
2661
2885
85"
1377
1487
1400
1515
2777
3002
79"
1264
1360
1190
1299
2453
2659
82"
1320
1436
1247
1356
2567
2792
85"
1377
1512
1303
1412
2680
2924
LEAD 28'6", PULL 30'
LEAD 28'6", PULL 28'6"
— REFINED PERFORMANCE.
04
— TRUSTED FOR MILLIONS OF MILES.
STANDARD FEATURES
AIR & ELECTRICAL LINES
CHUTE CRANKS
EXTRA-WIDE MUDFLAPS
HENDRICKSON SUSPENSION
HOPPER ACCESS
Each line is easily identifiable and easy to track. All lines are safely routed through side rails and secured front and back.
High-mounted, angled chute cranks make access easier.
Four-across, full coverage 102" wide mudflaps ahead of landing gear.
The Hendrickson INTRAAX air-ride suspension combines the axle and suspension as a fully integrated unit. The larger diameter 5 3/4" axle provides superior rigidity.
The front and rear are equipped with ladders to provide access to each hopper. Interior steps allow the operator into the hopper and a ladder on either side of the divider wall allows movement between the hoppers.
ALUMINUM FILL PLATE
AUXILIARY AIR SUPPLY
DUAL CHUTE OPENING
ELECTRIC REMOTE TARP OPENER
FRONT FENDER
Aluminum fill plate in bumper with Lode King logo.
An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure. up to recommended PSI.
A second chute opening shaft and crank on the opposite side from the primary chute opening.
Electric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box.
The front fender protects the area above the king pin section from road grime and snow buildup.
OPTIONAL FEATURES
07
HOPPER / PRESTIGE SERIES
FEATURES IN-LINE AIR FILTER
LOAD GAUGE ENCLOSURE
SELF-CLEANING CHUTE
TARP BOWS
UPPER COUPLER
The in-line air filter protects the air system from road debris build-up. The filter is serviceable and replaceable. Extends the duration of the ABS warranty.
The easily accessible air gauge box is positioned above the fenders to protect it from flying road debris.
The sliding track for the chute gate is designed to be self-cleaning. The chute itself slides past the fully open trap for complete clean-out.
The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow.
The upper coupler design is one of the most robust in the industry.
VIEW ALL OPTIONS AT LODEKING.COM
SIDEWALL VENTS
TIRE INFLATION SYSTEM
Vents allow air to flow into the trailer during unloading.
Hendrickson TIREMAAX PRO
TOW HOOKS Tow hooks are welded into place as an integral part of the rear sub-frame assembly.
LODEKING.COM
VIBRATOR BRACKETS
WHEELS
Vibrator brackets are mounted to the hopper.
24.5" option available in aluminum or steel.
08
TANDEM
PRESTIGE 40' TANDEM
36' TANDEM 36'0" 10.97m SHOWN 40' [12.19m] OPTION 220 3/8" W/ 36' TRAILER 244 3/8" W/ 40' TRAILER
40'0" 12.19m 232 7/8"
111"
111 1/4"
77" SHOWN 74" OPTION
30° 33° 24" KP SHOWN 18" KP OPTION
49"
30°
33°
137" W/ 77" WALL 134" W/ 74" WALL
33°
33°
135" 74" SHOWN 71" OPTION W/ 74" WALL 132" 77" OPTION 84" OPTION W/ 71" WALL 138" W/ 77" WALL 145" W/ 84" WALL
33°
33°
24" KP SHOWN 18" KP OPTION
49"
23"
23"
11R24.5
151" W/ 432" SHOWN 199" W/ 480" OPTION
49"
175 1/8" ALL CHUTES 16" WIDE X 24" LONG
28"
11R24.5
72"
28"
32'8 3/16" 9.96m WHEELBASE
ALL CHUTES 16" WIDE X 24" LONG
TRI-AXLE
29'7 1/2" 9.03m WHEELBASE /W 36' 33'7 1/2" [10.24m] WHEELBASE /W 40'
45' TRI-AXLE 3-HOPPER
45' TRI-AXLE 2-HOPPER
45'0" 13.72m 294"
45'0" 13.72m
204 1/8"
263 7/16"
112 3/8"
141 3/16"
33°
29.5°
33°
33°
80" SHOWN 84" OPTION
15" KP
49"
80"
140" W/ 80" WALL 144" W/ 84" WALL
29.5°
30°
49"
18" KP
23"
23" 163"
ALL CHUTES 16" WIDE X 24" LONG
60"
60"
SUPER-B
60"
60"
27"
ALL CHUTES 16" WIDE X 24" LONG 36'3" 11.05m WHEELBASE
28'6" LEAD & 28'6" PULL
28'6" LEAD & 30' PULL
61'5" 18.72m
61'-5 1/2" 18735mm 2'11 5/8" 0.90m
28'6" 8.69m
4'5" 1.35m
30'0" 9.14m
187 1/8"
28'6" 8.69m
189 9/16"
112 1/2"
30°
112 3/8"
30°
33°
30°
30" KP SHOWN 24" KP OPTION
82" SHOWN 141 1/2" 79" OPTION W/ 82" WALL 85" OPTION 138 1/2" W/ 79" WALL 144 1/2" W/ 85" WALL
OPTION ALL CHUTES ALL CHUTES 16" WIDE X 24" LONG 24" WIDE X 32" LONG
29'3 1/2" 9.08m WHEELBASE
50" 61"
61"
117 5/16" 15" KP
30°
49"
11R24.5
28'6" 8.69m 180 1/2"
188"
114" 15" KP
23" 116 3/4"
11R24.5
115"
27"
11R24.5
36'6 3/16" 11.13m WHEELBASE
49"
140"
30°
33°
30" KP SHOWN 24" KP OPTION
30°
82" SHOWN 141" 79" OPTION W/ 82" WALL 85" OPTION 138" W/ 79" WALL 144" W/ 85" WALL
23"
115 3/16" 116 3/4"
18'2 1/8" 5.54m 24'4 5/8" 7.43m WHEELBASE
49"
28"
11R24.5
ALL CHUTES 16" WIDE X 24" LONG
32 1/2" 61"
29'3 1/2" 9.08m WHEELBASE
Lode King Industries is a division of Triple E Canada Ltd. Product improvement is an ongoing process a Lode King Industries. Thus we reserve the right to change any specifications or components on any specifications or components on any or all products without prior notice; errors or omissions excepted. Lode King Industries is under no obligation to undertake modifications to units manufactured prior to changes in specifications. Printed in Canada. 06/17.
61"
97 1/8" 18'1 1/2" 5.52m
49"
28"
22'10 5/8" 6.98m WHEELBASE
LODEKING.COM
SPECIFICATIONS
BODY STRUCTURE COUPLER
Holland Fifth Wheel Standard; Other Options Available
HOPPER CHUTES
Standard Opening Size – 24" Long × 16" Wide; Roadside Opener Standard; 23 1/4" Clearance (w/ 11Rx24.5 Rubber); Other Options Available
HOPPERS
14 Gauge Steel; Overlapped Corners; Two Rows of Stiffeners on All Sides; Full Height Steel Divider Wall between Hoppers; Other Options Available
LANDING GEAR
Holland Mark V, Two Speed
LIGHTING
Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; Other Options Available
MUD FLAPS
1/2" Rubber Anti-Sail Rear Flaps Standard; Other Options Available
PAINT
All Steel Components, Coupler Frame and Suspension Frame. ThreeStage Paint Process Consisting of a Coating of Zinc, Urethane Primer and Top Coat.
SIDE WALLS
Corrugated 16 Gauge Steel Side Walls w/ 14 Gauge in High Stress Areas; Other Options Available
SLOPES
Aluminum Slope Sheets – .063 Thickness, Available in Black, White or Unpainted; No Less than 29.5°
TARPS/TARP SUPPORTS
Michel's Roll Tarp, Reinforced over Roof Bows; Fiberglass Ridge Pole; Aluminum Roof Bows; Aluminum End Caps; Remote Openers; Other Options Available
RUNNING GEAR
09
AXLES
Hendrickson INTRAAX .31" Wall, 5 3/4" Round, 77 1/2" Track, HN Spindle; Other Options Available
BRAKE SYSTEM
Air Drum Brake Standard; HXS-H23 Extended Service Linings Standard; Haldex 30/30 Gold Seal; Haldex S-ABA Slack 5 1/2"; 28 Spline Standard; Meritor Wabco ABS Equipped; Other Options Available
FENDERS
Lode King Checkered Aluminum Flat Fenders; Other Options Available
HUBS
10 Stud HP Cast Hub/Cast Drum Standard; Other Options Available
SUSPENSION
Hendrickson INTRAAX AANT23K LDA Air Ride Standard; Air Gauge Mounted in an Aluminum Box c/w Window and Light; Other Options Available
TIRES
Michelin/BF Goodrich Standard; Other Options Available
WHEEL SEALS
National
WHEELS
22.5" Standard; Other Options Available
HOPPER / PRESTIGE SERIES
— WITH YOU FOR THE LONG HAUL.
FOR MORE THAN 35 YEARS, LODE KING INDUSTRIES HAS BEEN MANUFACTURING THE FINEST TRAILERS ON THE ROAD. FROM GRAIN TRAILERS AND FLATBEDS TO SPECIALIZEDAPPLICATION TRAILERS, LODE KING’S ATTENTION TO QUALITY AND CUSTOMER CARE SIMPLY CAN’T BE MATCHED.
SOLID FOUNDATION
MADE IN CANADA
CRAFTSMANSHIP
PROUD CUSTOMERS
We’ve been proud to call Winkler, Manitoba home since 1980. Lode King has grown from humble beginnings to become Western Canada’s leading commercial trailer manufacturer. We’re building on that foundation, continually growing and innovating as our products take on new challenges year after year. Commitment to these founding principles and our dedication to future growth underpin our company’s culture and products.
Lode King understands our country’s diverse and sometimes harsh landscape. From the majestic Rockies to the big-sky prairies, we’re honoured to be Western Canada’s largest commercial trailer manufacturer. Our trailers are built to withstand Canada’s ever-changing, severe climates, while our dealer network conveniently spans coast to coast, serving our customers with a wide variety of product options.
Built tough, our no-compromise quality standards are unmatched in the transport trailer industry. Manufacturing within ISO 9001 international standards, we source and use the best materials available, from initial production steps to final finishing. Our goal is always to build a trailer that’s engineered to last, whatever our customers put it through. Every trailer is inspected and certified for quality assurance.
Lode King trailers are built for drivers who demand more in terms of style, technology, durability and features. Our customers head out on the open road with a sense of pride and have become our ambassadors at large. We never forget that every trailer has our name on it, so we maintain and value the relationships we’ve formed with fleet operators over the past 35-plus years.
CUTTING EDGE TECHNOLOGY
LONG TERM RELIABILITY
PROUD, DEDICATED AND LOYAL TEAM
CUSTOMER SERVICE: A LODE KING PRIORITY
The latest in automated laser cutting, bending and welding technologies provide the precision and consistency needed to produce top quality components. It’s innovative tools like these that help push our products to new heights and make our vision to create the best trailer possible a reality. In our world-class paint facility we also push the boundaries of the transport industry’s finishing standards.
Long term in our industry means more to Lode King than we can possibly convey. Our unwavering quest to produce the highest quality trailers has turned into decades of success for our customers. Knowing our durable trailers will withstand heavy use for years to come helps our customers purchase in total confidence. Our premium quality product means minimal downtime, which leads to more time out on the road, getting the job done.
Pride, dedication and loyalty are just part of what drives the team at Lode King Industries. We are committed to maintaining one of the cleanest and safest workspaces around, and place a high level of importance on training and development. This means that our employees are able to develop their skills, which provides both security and opportunities for career development within our growing company.
We know exactly how important communication is when you’re miles away from home. Technology and customer relations play a large role in how we provide solid service before, during, and after your purchase. As an integrated customer service team working together with our dealer network, we work hand-in-hand with our customers, pro-actively meeting their needs and maintaining the pride they feel in pulling a Lode King trailer.
LODEKING.COM
10
BOX 1146, 135 CANADA ST WINKLER, MB, CANADA, R6W 4B2 PHONE 204-325-4345 FAX 204-325-5369
LODEKING.COM Lode King Industries is a division of Triple E Canada Ltd. Product improvement is an ongoing process at Lode King Industries. Thus we reserve the right to change any specifications or components on any specifications or components on any or all products without prior notice; errors or omissions excepted. Lode-King Industries is under no obligation to undertake modifications to units manufactured prior to changes in specifications. Printed in Canada. 06/17.
