PRODUCT MANUAL

Report 2 Downloads 134 Views
REVISED AUGUST 2016

COPYRIGHT © FRIGHTPROPS, LLC. PLEASE CONTACT US IF YOU WOULD LIKE TO REPRODUCE OR REPUBLISH PORTIONS OF THIS DOCUMENT. FRIGHTPROPS, LLC has no control over the use of any product and therefore expects the user to exercise good judgment as to the proper selection, installation, use and maintenance of any product. FRIGHTPROPS, LLC assumes no responsibility for damage or injury of any kind due to misuse or improper application in any way by any person.

Looking for more info? Check out our Support and Training Center at www.FrightProps.com/FAQ

HAUNTED PHONE PROP

PRODUCT MANUAL

2

To access the SD you will have to remove 5 screws from the bottom of the phone.

CHANGING THE AUDIO:

This is the microSD Card that contains the audio files played by the phone. Remove it carefully and insert it into your PC to access and edit the audio files

When players pick up the phone they will hear a dial tone. Once the correct code is entered, the phone will ring several times before your audio file is played. Once the audio track is played, the prop will cut its power output, disengaging the magnetic lock.

• With the power off, hold down the center button on the phone • While holding down the center button, turn on power to the phone • A voice will alert you that the phone is in programming mode • Press the center button once to enter a new code • Enter the desired numerical sequence • Wait 4 seconds • The prop will alert you that the password has been successfully set

PROGRAMMING:

INSTRUCTIONS

3

This folder contains the MP3s the phone plays. To change the audio, simply open the folder and replace the MP3 with the one of your choosing with the same name as the existing file (001.mp3)

The MP3s pre-loaded onto the SD card are in these folders. You can replace them with your own MP3s, just name your new MP3s 001.mp3, 002.mp3 and so on .

INSTRUCTIONS