Report No.: E-E1102012 Page 1 of 24 Rev: None
CE / EMC Test Report Client Information: Applicant:
TAIWAN YOUNGYEAR ELECTRONICS CO., LTD.
Applicant add.:
113 lin sen road taoyuan city, taiwan R . O. C.
EUT Information: EUT Name:
Power Supply Tester
Model No.:
YE-PST-Ⅲ
Brand Name:
Prepared By: Asia Institute Technology (Dongguan) Limited Add. : No.6 Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China. Date of Receipt: Feb 21, 2011
Date of Test: Feb 24~27, 2011
Date of Issue:
Test Result:
Feb 28, 2011
Pass
This device has been tested and found to comply with the stated standard(s), which is (are) required by the council directive of 2004/108/EC and indicated in the test report and are applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Asia Institute Technology (Dongguan) Limited, this document may be altered or revised by Asia Institute Technology (Dongguan) Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement.
Reviewed by:
Approved by: Test director
Technical director Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1102012 Page 2 of 24 Rev: None
1 Contents Page
COVER PAGE 1
CONTENTS ...........................................................................................................................................................2
2
TEST SUMMARY ..................................................................................................................................................3 2.1
3
4
MEASUREMENT UNCERTAINTY ............................................................................................................................3
TEST FACILITY.....................................................................................................................................................3 3.1
DEVIATION FROM STANDARD...............................................................................................................................3
3.2
ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................................3
GENERAL INFORMATION ...................................................................................................................................3 4.1
GENERAL DESCRIPTION OF EUT ........................................................................................................................3
4.1.1
EUT Test Mode........................................................................................................................................3
4.2
DESCRIPTION OF TEST SETUP.............................................................................................................................3
4.3
TEST PERIPHERAL LIST ......................................................................................................................................3
4.4 EUT PERIPHERAL LIST ..........................................................................................................................................3 5
EQUIPMENTS LIST FOR ALL TEST ITEMS .......................................................................................................3
6
EMISSION TEST RESULTS .................................................................................................................................3 6.1
MAINS TERMINALS DISTURBANCE VOLTAGE MEASUREMENT ................................................................................3
6.1.1
E.U.T. Operation ......................................................................................................................................3
6.1.2
Test Specification.....................................................................................................................................3
6.1.3
Measurement Data ..................................................................................................................................3
6.1.4 Test Setup Photograph .................................................................................................................................3 6.2
7
6.2.1
E.U.T. Operation ......................................................................................................................................3
6.2.2
Test Specification.....................................................................................................................................3
6.2.3
Measurement Data ..................................................................................................................................3
6.2.4
Test Setup photograph.............................................................................................................................3
IMMUNITY TEST RESULTS .................................................................................................................................3 7.1
8
RADIATED EMISSION MEASUREMENT ..................................................................................................................3
ELECTROSTATIC DISCHARGE IMMUNITY TEST .......................................................................................................3
7.1.1
E.U.T. Operation ......................................................................................................................................3
7.1.2
Test specification .....................................................................................................................................3
7.1.3
Measurement Data ..................................................................................................................................3
7.1.4
Test Setup Photograph ............................................................................................................................3
APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS .............................................................3
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1102012 Page 3 of 24 Rev: None
2 Test Summary
Test
Test Requirement
Test Method
Criterion
Result
Mains Terminals Disturbance Voltage, 150kHz to 30MHz
CISPR 22: 2005+A1:2005 EN 55022: 2006+A1:2007
CISPR 22: 2005+A1:2005 EN 55022: 2006+A1:2007
Limits
PASS
Radiated Emissions 30MHz to 1GHz
CISPR 22: 2005+A1:2005 EN 55022: 2006+A1:2007
CISPR 22: 2005+A1:2005 EN 55022: 2006+A1:2007
Limits
PASS
Harmonics
IEC 61000-3-2: 2005 EN 61000-3-2: 2006
IEC 61000-3-2: 2005 EN 61000-3-2: 2006
A
PASS
Flicker
IEC 61000-3-3: 2005 EN 61000-3-3: 1995+A1+A2
IEC 61000-3-3: 2008 EN 61000-3-3: 2008
Limits
PASS
Electrostatic Discharge
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2003
IEC 61000-4-2: 1995+A1+A2 EN 61000-4-2: 1995+A1+A2
B
PASS
R/S
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2003
IEC 61000-4-3: 2006 EN 61000-4-3: 2006
A
PASS
Electric Fast Transients
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2003
IEC 61000-4-4: 2004
B
PASS
Surge
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2003
IEC 61000-4-5: 2005
B
PASS
C/S
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2006
IEC 61000-4-6: 1996+A1+IS1
A
PASS
Power Frequency magnetic Field
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2003
IEC 61000-4-8:1993+A1
A
PASS
Dips
CISPR 24: 1997+A1+A2:2002 EN 55024: 1998+A1+A2:2003
IEC 61000-4-11:2004
B&C&C
EN 61000-4-11:2004
Note(1)
EN 61000-4-4: 2004
EN 61000-4-5: 2006
EN 61000-4-6: 1996+A1+IS1
EN 61000-4-8:1994+A1
PASS
Note: (1) Voltage dip: >95% reduction – Performance Criteria B Voltage dip: 30% reduction – Performance Criteria C Voltage Interruption: >95% Interruption – Performance Criteria C Model description: N/A
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1102012 Page 4 of 24 Rev: None
2.1 Measurement Uncertainty The report uncertainty of measurement y ± U , where expended uncertainty U is based on a standard uncertainty Multiplied by a coverage factor of k=2 , providing a level of confidence of approximately 95% .
No.
Item
Frequency Range
U , Value
1
Power Line Conducted Emission (Conduction 1)
150KHz~30MHz
1.58 dB
2
Power Line Conducted Emission (Conduction 2)
150KHz~30MHz
2.00 dB
3
Disturbance Power Emission (Conduction 1)
30MHz~300MHz
3.12 dB
4
Radiated Emission Test
30MHz~1GHz
3.40 dB
5
Radiated Emission Test
1GHz~18GHz
3.30 dB
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1102012 Page 5 of 24 Rev: None
3 Test Facility The test facility is recognized, certified or accredited by the following organizations: .FCC- Registration No: 248337 The 3m Semi-Anechoic Chamber, 3m/10m Open Area Test Site and Shielding Room of Asia Institute Technology (Dongguan) Limited have been registered by Federal Communications Commission (FCC) on Dec.07, 2006. .Industry Canada(IC)-Registration No: IC6819A-1 & IC6819A-2 The 3m Semi-Anechoic Chamber and 3m/10m Open Area Test Site of Asia Institute Technology (Dongguan) Limited have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing on Nov.07, 2006. .VCCI- Registration No: R-2482 & C-2730 & R-2638 The 3m/10m Open Area Test Site, Shielding Room and 3m Chamber of Asia Institute Technology (Dongguan) Limited have been registered by Voluntary Control Council for Interference on Jan.24, 2007 and Oct. 30, 2007. .TUV Rhineland Asia Institute Technology (Dongguan) Limited has been assessed on Jan.16, 2007 that it can carry out EMC tests by order and under supervision of TUV Rhineland. .ITS- Registration No: TMPSHA031 Asia Institute Technology (Dongguan) Limited has been assessed and included in Intertek Shanghai TMP Program regarding Laboratory facilities and test equipment on Nov.10, 2006.
3.1 Deviation from standard None
3.2 Abnormalities from standard conditions None
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1102012 Page 6 of 24 Rev: None
4 General Information 4.1 General Description of EUT Manufacturer:
TAIWAN YOUNGYEAR ELECTRONICS CO., LTD.
Manufacturer Address:
JIN ZHU INDUSTRIES AREA QING XI TOWN DONG GUAN CITY GUANGDONG P. R. China.
EUT Name:
Power Supply Tester
Model No:
YE-PST-Ⅲ
Brand Name: Serial No:
N/A
Power Supply Range:
DC ±12V; ±5V; 3.3V.
Power Supply:
DC ±12V; ±5V; 3.3V. EMI component’s information:
No.
component name
Brand Name
Model No:
Serial No:
1
N/A
N/A
N/A
N/A
4.1.1 EUT Test Mode Mode 1
The EUT is running.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1102012 Page 7 of 24 Rev: None
4.2 Description of Test setup EUT was tested in normal configuration (Please See following Block diagrams) 1. Block diagram of EUT configuration- EMI
AC Line
Power supply
EUT
2. Block diagram of EUT configuration-EMS
AC Line
Power supply
EUT
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 8 of 24 Rev: None
4.3
Test Peripheral List
No.
Equipment
Manufacturer
1
N/A
N/A
4.4
EMC
Model
Compliance
No.
N/A
N/A
Serial No.
Power cord
signal cable
N/A
N/A
N/A
EUT Peripheral List
No.
Equipment
Manufacturer
1
N/A
N/A
EMC Compliance
N/A
Model No.
Serial No.
Power cord
signal cable
N/A
N/A
N/A
N/A
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 9 of 24 Rev: None
5 Equipments List for All Test Items Radiation Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
Spectrum Analyzer
ADVANTEST
R3132
160400005
2010.04.07
2011.04.06
2
EMI Measuring Receiver
Schaffner
SCR3501
235
2010.04.07
2011.04.06
3
Low Noise Pre Amplifier
Tsj
MLA-10K01-B01-27
1205323
2011.03.07
2011.09.06
4
TRILOG Super Broadband test Antenna
SCHWARZBECK
VULB9160
9160-3206
2010.07.02
2011.07.01
5
50Ω Coaxial Switch
Anritsu
MP59B
6200264416
2011.03.07
2011.09.06
1# Conduction Test equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
EMI Test Receiver
R&S
ESCI
100124
2010.12.28
2011.12.27
2
LISN
Kyoritsu
KNW-242
8-837-4
2010.04.07
2011.04.06
3
LISN
Kyoritsu
KNW-407
8-1789-3
2010.04.07
2011.04.06
4
50Ω Coaxial Switch
Anritsu
MP59B
6200264417
2011.03.07
2011.09.06
H/F Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
Signal Conditioning Unit
Schaffner
CCN1000-1
72472
2010.04.07
2011.04.06
2
5KV AC Power Source
Schaffner
NSG1007-5-208-413
57227
2010.04.07
2011.04.06
ESD Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
ESD Simulator
Schaffner
NSG435
5866
2010.04.07
2011.04.06
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 10 of 24 Rev: None R/S Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
MXG analog signal generator
Agilent
N5181A
MY46240859
2010.12.28
2011.12.27
2
Power Amplifier
Schaffner
CBA9437
T43660
N/A
N/A
3
Power Amplifier
Schaffner
CBA9433
T43574
N/A
N/A
4
Power Amplifier
Schaffner
CBA9429
T43605
N/A
N/A
5
Logarithmic-perio dic Antenna
Schwarzbeck
VULP9118E
820
N/A
N/A
6
Broadband Horn Antenna
Schwarzbeck
BBHA 9120LF
255
N/A
N/A
7
Power meter
Agilent
E4419B
MY45102079
2010.12.28
2011.12.27
8
Power sensor
Agilent
8481A
MY41097696
2010.12.28
2011.12.27
9
Power sensor
Agilent
8481A
MY41097697
2010.12.28
2011.12.27
10
RF Relay matrix
tsj
RFM-S621
04261
N/A
N/A
11
Field probe
ETS
HI-6005
00069963
2010.12.28
2011.12.27
EFT/B Test equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
INS6501 Step-transformer
Schaffner
INA 6501
136
2010.04.07
2011.04.06
2
MODULA GENERATOR
Schaffner
MODULA 6150
34475
2010.04.07
2011.04.06
3
Capacitive Coupling Clamp
Schaffner
CDN8014
22519
2010.04.07
2011.04.06
Surge Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
INS6501 step-transformer
Schaffner
INA 6501
136
2010.04.07
2011.04.06
2
MODULA GENERATOR
Schaffner
MODULA 6150
34475
2010.04.07
2011.04.06
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 11 of 24 Rev: None C/S Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
SML01 Signal Generator
R&S
SML01
104531
2010.04.07
2011.04.06
2
Power Amplifier
Schaffner
CBA9437
T43660
N/A
N/A
3
Attenuator
Aeroflex / Weinschel
40-6-33
PA130
2010.07.07
2011.07.06
4
Power Line CDN
tsj
TSCDN-M1-1 6A
07010
2010.12.28
2011.12.27
5
Power Line CDN
tsj
TSCDN-M2-1 6A
07024
2010.12.28
2011.12.27
6
Power Line CDN
tsj
TSCDN-M3-1 6A
07032
2010.12.28
2011.12.27
7
Signal Line CDN
tsj
TSCDN-S25
07016
2010.12.28
2011.12.27
8
Signal Line CDN
tsj
TSCDN-AF4
07013
2010.12.28
2011.12.27
9
EM Injection Clamp
tsj
TSIC-23
535
2010.12.28
2011.12.27
PFMF Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
Magnetic field generator
Schaffner
MFO6501
34299
2010.04.07
2011.04.06
2
Magnetic Field Loop Antenna
Schaffner
INA 702
148
2010.04.07
2011.04.06
Dips Test Equipment No
Test Equipment
Manufacturer
Model No
Serial No
Cal. Date
Cal. Due Date
1
INS6501 Step-transformer
Schaffner
INA 6501
136
2010.04.07
2011.04.06
2
MODULA GENERATOR
Schaffner
MODULA 6150
34475
2010.04.07
2011.04.06
Note: 1.
is not applicable in this Test Report.
is applicable in this Test Report.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 12 of 24 Rev: None
6 Emission Test Results 6.1 Mains Terminals Disturbance Voltage Measurement Frequency (MHz)
Class A (dBμV)
Class B (dBμV)
Q.P. (Quasi-Peak)
A.V. (Average)
Q.P. (Quasi-Peak)
A.V. (Average)
0.15 ~ 0.50
79
66
66 to 56
56 to 46
0.50 ~ 5.0
73
60
56
46
5.0 ~ 30
73
60
60
50
Peak for pre-scan (9kHz Resolution Bandwidth) Quasi-Peak & Average if maximized peak within 6dB of Average Limit
Detector:
6.1.1 E.U.T. Operation Temperature:
23°C
Test Mode:
Humidity:
55% RH
Atmospheric Pressure:
Mode 1
The Worst Mode:
6.1.2 Test Specification
40cm
101
Kpa Mode 1
V.C.P.
EUT
80cm
H.C.P.
Pulse Limiter
Test Receiver
LISN
EUT was placed upon a wooden test table 0.8m above the horizontal metal reference plane and 0.4m from the vertical ground plane, and it was connected to an AMN. The closest distance between the boundary of the EUT and the surface of the AMN is 0.8m. All peripherals were connected to another AMN, and placed at a distance of 10cm from each other. A spectrum and receiver was connected to the RF output port of the AMN. Both average and quasi-peak value were detected.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 13 of 24 Rev: None
6.1.3 Measurement Data An initial pre-scan was performed on the live and neutral lines. Quasi-peak or average measurements were performed at the frequency which maximum peak emissions were detected. Please refer to the attached quasi-peak & average measurement data for reference. Line -- DC ±12V; ±5V; 3.3V. AC 230V/50Hz for power supply
Operating mode: Mode 1
Frequency
Factor
Limits (dBμV)
(MHz)
(dB)
Quasi-Peak
Average
Quasi-Peak
Average
Quasi-Peak
Average
Quasi-Peak
Average
0.2060
11.09
35.35
34.82
46.44
45.91
63.36
53.36
-16.92
-7.45
0.3060
10.71
29.28
28.98
39.99
39.69
60.08
50.08
-20.09
-10.39
0.5100
10.34
29.77
29.31
40.11
39.65
56.00
46.00
-15.89
-6.35
*0.8139
10.23
30.76
30.28
40.99
40.51
56.00
46.00
-15.01
-5.49
1.0180
10.19
29.31
28.69
39.50
38.88
56.00
46.00
-16.50
-7.12
2.8540
10.18
19.95
17.66
30.13
27.84
56.00
46.00
-25.87
-18.16
Meter Reading (dBμV)
Emission Level (dBμV)
Margin (dB)
Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. 3. ‘*’ means the worst case
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 14 of 24 Rev: None Neutral -- DC ±12V; ±5V; 3.3V. AC 230V/50Hz for power supply Meter Reading (dBμV)
Emission Level (dBμV)
Operating mode: Mode 1
Frequency
Factor
Limits (dBμV)
Margin (dB)
(MHz)
(dB)
Quasi-Peak
Average
Quasi-Peak
Average
Quasi-Peak
Average
Quasi-Peak
Average
0.2060
11.09
35.48
34.95
46.57
46.04
63.36
53.36
-16.79
-7.32
0.3060
10.71
30.04
29.61
40.75
40.32
60.08
50.08
-19.33
-9.76
0.5100
10.34
30.28
29.53
40.62
39.87
56.00
46.00
-15.38
-6.13
*0.8139
10.23
30.47
29.87
40.70
40.10
56.00
46.00
-15.30
-5.90
1.0220
10.19
29.06
28.08
39.25
38.27
56.00
46.00
-16.75
-7.73
3.1619
10.17
18.74
16.78
28.91
26.95
56.00
46.00
-27.09
-19.05
Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. 3. ‘*’ means the worst case
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 15 of 24 Rev: None
6.1.4 Test Setup Photograph
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 16 of 24 Rev: None
6.2 Radiated Emission Measurement Limits of Radiated Emission Measurement (Below 1GHz) Class A (10m)
Frequency (MHz)
Quasi-Peak
Class B (3m)
dB(μV/m)
Quasi-Peak
dB(μV/m)
30 ~ 230
40.0
40.0
230 ~ 1000
47.0
47.0
Limits of Radiated Emission Measurement (Above 1GHz) Class A (3m)
Frequency (MHz)
Quasi-Peak
Above 1000
Class B (3m)
dB(μV/m)
Quasi-Peak
dB(μV/m)
Peak
Average
Peak
Average
80
60
74
54
Peak for pre-scan (120kHz resolution bandwidth)
Detector:
Quasi-Peak if maximum peak within 6dB of limit
6.2.1 E.U.T. Operation Temperature:
24°C
Humidity:
Test Mode:
Mode 1
52% RH
Atmospheric Pressure:
101
The Worst Mode:
Kpa
Mode 1
6.2.2 Test Specification 10 m
1~ 4 m EUT 80 cm
Test Receiver
Amp
EUT was placed upon a wooden test table which was placed on the turn table 0.8m above the horizontal metal ground plane, and operating in the mode as mentioned above. A receiving antenna was placed 3m away from the EUT. During testing, turn around the turn table and move the antenna from 1m to 4m to find the maximum field-strength reading. All peripherals were placed at a distance of 10cm between each other. Both horizontal and vertical antenna polarities were tested.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 17 of 24 Rev: None
6.2.3 Measurement Data An initial pre-scan was performed in the 10m chamber using the spectrum analyzers in peak detection mode. The EUT was measured by Biology antenna with 2 orthogonal polarities and peak emissions from the EUT were detected within 6dB of the class A limit line. The following quasi-peak measurements were performed on the EUT.
Horizontal -- DC ±12V; ±5V; 3.3V. AC 230V/50Hz for power supply
Operating mode: Mode 1
Frequency
Factor
Meter Reading
Emission Level
Margin
Limits
(MHz)
(dB)
(dBμV)
(dBμV/m)
(dB)
(dBμV/m)
39.4371**
-13.85
28.86
15.01
40.00
-24.99
63.9827**
-15.45
29.43
13.98
40.00
-26.02
103.0799**
-14.94
36.70
21.76
40.00
-18.24
135.9822**
-12.49
38.22
25.73
40.00
-14.27
191.7450**
-12.92
38.75
25.83
40.00
-14.17
216.0240**
-10.39
38.48
28.09
40.00
-11.91
Remark: 1. “ * ” Mark means readings are Peak Values. 2. “ ** “ Mark means readings are Quasi-Peak values. 3. Factor = Antenna Factor + Cable Loss – Pre-amplifier.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 18 of 24 Rev: None VERTICAL-- DC ±12V; ±5V; 3.3V. AC 230V/50Hz for power supply
Operating mode: Mode 1
Frequency
Factor
Meter Reading
Emission Level
Margin
Limits
(MHz)
(dB)
(dBμV)
(dBμV/m)
(dB)
(dBμV/m)
36.0007**
-14.25
38.81
24.56
40.00
-15.44
48.8429**
-13.47
34.68
21.21
40.00
-18.79
61.9951**
-14.87
32.91
18.04
40.00
-21.96
72.3375**
-17.12
36.04
18.92
40.00
-21.08
143.8294**
-13.01
32.20
19.19
40.00
-20.81
209.3129**
-10.91
30.81
19.90
40.00
-20.10
Remark: 1. “ * ” Mark means readings are Peak Values. 2. “ ** “ Mark means readings are Quasi-Peak values. 3. Factor = Antenna Factor + Cable Loss – Pre-amplifier.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 19 of 24 Rev: None
6.2.4 Test Setup photograph
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 20 of 24 Rev: None
7 Immunity Test Results 7.1 Electrostatic discharge immunity test Acceptable Performance Criterion: Discharge Impedance:
Discharge Voltage:
B 330 Ω / 150 pF Air Discharge:
±8 kV
Contact Discharge:
±4 kV
VCP, HCP:
±4 kV
Polarity:
Positive & Negative
Minimum discharge Interval:
1 second
7.1.1 E.U.T. Operation Temperature:
23°C
Test Mode:
Humidity: Mode 1
54% RH
Atmospheric Pressure: The Worst Mode:
101
Kpa
Mode 1
7.1.2 Test specification
EUT was operated in the mode as mentioned above. Both contact and air discharge was executed. Contact discharge to the conductive surfaces and to coupling planes; air discharge at insulating surfaces. Each test point shall be subjected to 10 discharges at least (For each voltage and polarity).
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 21 of 24 Rev: None
7.1.3 Measurement Data
Test Record Form:AMC 410-6
Electrostatic Discharge Test Results Applicant:TAIWAN YOUNGYEAR ELECTRONICS CO., LTD.
IEC61000-4-2 EN61000-4-2 other:
Test Date:Feb 26, 2011 Test Result:
Pass
Fail
EUT:Power Supply Tester Temp:
°C
23
Humi:
54
%
M/N:YE-PST-Ⅲ Atmospheric Pressure:
101
Kpa
Test Voltage:DC ±12V; 5V; 3.3V. Operating Mode Discharge times
Mode 1 Contact discharge: minimum 25 times (+/-respectively) at each point, Air discharge: minimum 10 times (+/- respectively) at each point.
Discharge Mode
Air Discharge
Test level (kV) Test
Location
4 +
8 -
+
Contact Discharge
10 -
+
15 -
+
2 -
4
6 +
Performance Result Criterion
8
+
-
+
-
-
+
-
HCP
B
B
B
B
Pass
VCP
B
B
B
B
Pass
A1
B
B
B
B
Pass
A2
B
B
B
B
Pass
A3
B
B
B
B
A4
B
B
B
B
B
Pass Pass
Test Equipment:(1) ESD Simulator: Schaffner NSG435.
Note: “P” means Pass , Horizontal Coupling Plane(HCP) and Vertical Coupling plane(VCP). “Cx” means Contact Point ,x=1~N,“Ax” means Air Point, x=1~N.
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 22 of 24 Rev: None
7.1.4 Test Setup Photograph
A2
A1
A3
A4
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 23 of 24 Rev: None
8 APPENDIX-Photographs of EUT Constructional Details
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.
Report No.: E-E1005013 Page 24 of 24 Rev: None
Asia Institute Technology (Dongguan) Limited No.6,Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.