ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
EMC TEST REPORT For Intracom Asia Co., Ltd. Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure Model No.
: 130028, 130042, 130103, 130110, 130127
Prepared for : Intracom Asia Co., Ltd. 7F., No.125, Sec. 2, Da Tong Rd., Shijr Dist., New Taipei City 22183, Taiwan (R.O.C.)
Prepared By : Shenzhen Outest Technology Co., Ltd. 4/F, JinLiHua Commercial Building, Park Road, Bao’an 31st District, Shenzhen, China
Tel Fax
Report No.
: (86) 755-26415344 : (86) 755-27841136
: OTE110701168-01
Date of Test : Jul 15- 19, 2011 Date of Rep. : Jul 20, 2011
Page 1 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
TABLE OF CONTENT Description
Page
Test Report Declaration 1.
GENERAL INFORMATION ..................................................................................................4 1.1. 1.2. 1.3.
Description of Device (EUT)......................................................................................................4 Test Facility..................................................................................................................................5 Uncertainty...................................................................................................................................5
2.
TEST INSTRUMENT USED .................................................................................................6
3.
RADIATED EMISSION TEST ..............................................................................................7 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7.
4.
ELECTROSTATIC DISCHARGE TEST ...........................................................................10 4.1. 4.2. 4.3. 4.4. 4.5. 4.6. 4.7.
5.
Block Diagram of Test Setup ....................................................................................................7 Test Standard ..............................................................................................................................7 Radiated Emission Limit ............................................................................................................8 EUT Configuration on Test........................................................................................................8 Operating Condition of EUT ......................................................................................................8 Test Procedure............................................................................................................................8 Radiated Emission Test Result.................................................................................................9 Block Diagram of Test Setup ..................................................................................................10 Test Standard ............................................................................................................................10 Severity Levels and Performance Criterion ..........................................................................10 EUT Configuration on Test......................................................................................................11 Operating Condition of EUT ....................................................................................................11 Test Procedure..........................................................................................................................11 Test Results...............................................................................................................................11
RF FIELD STRENGTH SUSCEPTIBILITY TEST...........................................................13 5.1. 5.2. 5.3. 5.4. 5.5. 5.6. 5.7.
Block Diagram of Test Setup ..................................................................................................13 Test Standard ............................................................................................................................13 Severity Levels and Performance Criterion ..........................................................................14 EUT Configuration on Test......................................................................................................14 Operating Condition of EUT ....................................................................................................14 Test Procedure..........................................................................................................................14 Test Results...............................................................................................................................14
APPENDIX I ------------- Radiated Emission Test Data APPENDIX II ------------ Photographs of the EUT
Page 2 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
TEST REPORT DECLARATION Applicant
: Intracom Asia Co., Ltd.
EUT Description
:
Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure
(A)
Model No.
:
130028, 130042, 130103, 130110, 130127
(B)
Trade Name
:
MANHATTAN
(C)
Serial No.
:
N.A
(D)
Power Supply
:
DC5V 500mA
Test Procedure Used: EMI: EN 55022: 2006+A1:2007 EMS: EN55024: 1998+A1: 2001+A2: 2003 (EN61000-4-2: 2009, EN61000-4-3: 2006+A1:2008,)
The device described above has been tested by Shenzhen Outest Technology Co., Ltd. to determine the maximum emission levels emanating from the device, the severe levels that the device can endure and EUT’S performance criterion. The test results are contained in this test report. Also, this report shows that the EUT is technically compliant with the EN55022, EN55024 requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Outest Technology Co., Ltd.
Date of Test:
Jul 15- 19, 2011
Prepared by: Project Engineer
Approved & Authorized Signer: Project Manager
Page 3 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
1. GENERAL INFORMATION 1.1. Description of Device (EUT) Description
: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure
Model Number : 130028, 130042, 130103, 130110, 130127 They are quite same in circuit design and PCB layout, so all tests of this report are perform on model 130028.
Applicant Address
: Intracom Asia Co., Ltd. : 7F., No.125, Sec. 2, Da Tong Rd., Shijr Dist., New Taipei City 22183, Taiwan (R.O.C.)
Date of Test
: Jul 15- 19, 2011
Page 4 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
1.2. Test Facility Test Firm
: Shenzhen Outest Technology Co., LTD
Address
: 4/F, JinLiHua Commercial Building, Park Road, Bao’an 31st District, Shenzhen, China
Tel Fax
: 86-755-26415344 : 86-755-27841136
1.3. Uncertainty
Radiated Emission Uncertainty
Page 5 of 23
=
±4.26dB
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
2. TEST INSTRUMENT USED No.
Equipment
Manufacturer
Model No.
S/N
Cal. Date
1
EMI Test Receiver
R&S
ESCI
100687
2011-2-22
2
EMI Test Receiver
R&S
ESPI
100097
2011-2-22
3
Amplifier
HP
8447D
1937A02492
2011-2-22
4
Single Power Conductor Module
FCC
FCC-LISN-5-501-01-CISPR25
07101
2011-2-22
5
TRILOG Broadband Test-Antenna
SCHWARZBECK
VULB9163
9163-324
2011-2-22
6
Horn Antenna
SCHWARZBECK
BBHA9120A
B08000991-0001
2011-2-22
7
High Field Biconical Antenna
ELECTRO-METRICS
EM-6913
166
2011-2-22
8
Log Periodic Antenna
ELECTRO-METRICS
EM-6950
811
2011-2-22
9
Remote Active Vertical Antenna
ELECTRO-METRICS
EM-6892
304
2011-2-22
10
Power Clamp
SCHWARZBECK
MDS-21
3812
2011-2-22
11
Single Power Conductor Module
FCC
FCC-LISN-5-501-01-CISPR25
07102
2011-2-22
12
Teo Line Single Phase Module
SCHWARZBECK
NSLK8128
D-69250
2011-2-22
13
Positioning Controller
C&C
CC-C-1F
MF7802113
2011-2-22
14
`Electrostatic Discharge Simulator
TESEQ
NSG437
125
2011-2-22
15
Fast Transient Burst Generator
SCHAFFNER
MODULA6150
34572
2011-2-22
16
Fast Transient Noise Simulator
Noiseken
FNS-105AX
31485
2011-2-22
17
Capacitive Coupling Clamp
TESEQ
CDN8014
25096
2011-2-22
18
Color TV Pattern Genenator
PHILIPS
PM5418
TM209947
N/A
19
Power Frequency Magnetic Field Gene
EVERFINE
EMS61000-8K
608002
2011-2-22
20
Triple-Loop Antenna
EVERFINE
LLA-2
607004
2011-2-22
21
10dB attenuator
SCHWARZBECK
MTAIMP-136
R65.90.0001#06
2011-2-22
Page 6 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
3. RADIATED EMISSION TEST 3.1. Block Diagram of Test Setup 3.1.1. Block Diagram of EUT Test Setup
Keyboard
Mouse
AC Mains
PC
AC Mains
Monitor
EUT
(EUT: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure) 3.1.2. Anechoic Chamber Setup Diagram Antenna Tower Antenna Elevation Varies From 1 to 4 Meters
3 Meters
EUT
Turn Table
0.8 Meter
Ground Plane (EUT: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure)
3.2. Test Standard EN 55022: 2006+A1:2007
Page 7 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
3.3. Radiated Emission Limit Frequency MHz 30 ~ 230 230 ~ 1000
Distance (Meter/s) 3 3
Field Strengths Limits dB(µV)/m 40.0 47.0
Remark: (1) Emission level (dB (µV)/m) = 20 log Emission level (µV/m) (2) The smaller limit shall apply at the cross point between two frequency bands. (3) Distance refers to the distance in meters between the measuring instrument, antenna and the closed point of any part of the device or system.
3.4. EUT Configuration on Test The EN 55022 regulations test method must be used to find the maximum emission during radiated emission test. 3.4.1. Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure (EUT) (A) Model No.
: 130028
(B) Serial No.
: N.A
(C) Manufactory : N.A
3.5. Operating Condition of EUT 3.5.1. Setup the EUT and simulators as shown in Section 3.1. 3.5.2. Turn on the power of all equipments. 3.5.3. Let the EUT work in test mode and test it.
3.6. Test Procedure The EUT and its simulators are placed on a turned table that is 0.8 meter above the ground. The turned table can rotate 360 degrees to determine the position of the maximum emission level. The EUT is set 3 meters away from the receiving antenna that is mounted on the antenna tower. The antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Broadband antenna (calibrated biconical and log periodical antenna) is used as receiving antenna. Both horizontal and vertical polarization of the antenna is set on test. In order to find the maximum emission levels, the interface cable must be manipulated according to EN55022 on radiated emission test. The bandwidth setting on the field strength meter (R & S Test Receiver Page 8 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
ESCI) is set at 120 KHz. The frequency range from 30 MHz to 1000 MHz is investigated. The test data are listed in the Section 3.7 and the scanning waveform are attached within APPENDIX I.
3.7. Radiated Emission Test Result PASS. The frequency spectrum from 30 MHz to 1000 MHz is investigated. Detailed information, please see the APPENDIX (I) file.
Page 9 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
4. ELECTROSTATIC DISCHARGE TEST 4.1. Block Diagram of Test Setup 4.1.1. Block Diagram of EUT Test Setup
Keyboard
Mouse
AC Mains
PC
AC Mains
Monitor
EUT
(EUT: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure) 4.1.2.ESD Test Setup EUT
ESD Tester
0.8 m
AC Mains
Remark:
is Discharge Electrode
(EUT: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure)
4.2. Test Standard EN55024: 1998+A1: 2001+A2: 2003 (EN61000-4-2: 2009)
4.3. Severity Levels and Performance Criterion Severity Level 3 for Air Discharge at 8KV Severity Level 2 for Contact Discharge at 4KV Severity Level: Test Voltage Test Voltage Level Contact Discharge (KV) Air Discharge (KV) 1. 2 2 2. 4 4 3. 6 8 4. 8 15 X. Special Special Performance criterion: B Page 10 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
4.4. EUT Configuration on Test The configuration of EUT is listed in Section 3.4.
4.5. Operating Condition of EUT 4.5.1. Setup the EUT as shown in Section 4.1. 4.5.2. Turning on the power of all equipments . 4.5.3. Let the EUT work in test mode and test it.
4.6. Test Procedure 4.6.1. Air Discharge: This test is done on a non-conductive surface. The round discharge tip of the discharge electrode shall be approached as fast as possible to touch the EUT. After each discharge, the discharge electrode shall be removed from the EUT. The generator is then re-triggered for a new single discharge and repeated 10 times for each pre-selected test point. This procedure shall be repeated until all the air discharge completed. 4.6.2. Contact Discharge: All the procedure shall be same as Section 4.6.1 except that the tip of the discharge electrode shall touch the EUT before the discharge switch is operated. Indirect discharge for horizontal coupling plane At least 20 single discharges shall be applied to the horizontal coupling plane, at points on each side of the EUT. The discharge electrode position is vertically at a distance of 0.1m from the EUT and with the discharge electrode touching the coupling plane. Indirect discharge for vertical coupling plane At least 20 single discharges shall be applied to the center of one vertical edge of the coupling plane. The coupling plane, of dimensions 0.5m X 0.5m, is placed parallel to, and positioned at a distance of 0.1m from the EUT. Discharges shall be applied to the coupling plane, with this plane in sufficient different positions that the four faces of the EUT are completely illuminated.
4.7. Test Results PASS. Detailed information, Please refer to the following page.
Page 11 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
Electrostatic Discharge Test Results Hi-Speed USB 2.0 2.5 inches EUT
: SATA external hard drive
Temperature
: 25℃
Humidity
: 55%
Test Mode
: ON
enclosure M/N
: 130028
Power Supply : DC 5V Air Discharge: ±8KV
For each point positive 10 times and negative 10 times discharge.
Contact Discharge: ±4KV Kind Location
A-Air Discharge C-Contact Discharge
Result
Nonconductive Enclosure
A
PASS
Conductive Enclosure
C
PASS
HCP
C
PASS
VCP of Front
C
PASS
VCP of Rear
C
PASS
VCP of Left
C
PASS
VCP of Right
C
PASS
Remark: Discharge should be considered on Contact and Air and Horizontal Coupling Plane (HCP) and Vertical Coupling Plane (VCP).
Page 12 of 23
Test Equipment: See Clause 2.
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
5. RF FIELD STRENGTH SUSCEPTIBILITY TEST 5.1. Block Diagram of Test Setup 5.1.1. Block Diagram of EUT Test Setup
Keyboard
Mouse
AC Mains
PC
AC Mains
Monitor
EUT
(EUT: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure) 5.1.2.R/S Test Setup
3 Meters
EUT and Simulators System
Anechoic Chamber 0.8 Meter
Measurement Room Power Amp
Signal Generator
(EUT: Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure)
5.2. Test Standard EN55024: 1998+A1: 2001+A2: 2003 (EN61000-4-3: 2006+A1:2008)
Page 13 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
5.3. Severity Levels and Performance Criterion Severity Level 2 at 3V / m, Severity Level: Level 1. 2. 3. X.
Field Strength V/m 1 3 10 Special
Performance criterion: A
5.4. EUT Configuration on Test The configuration of EUT is listed in Section 3.4.
5.5.Operating Condition of EUT 5.5.1. Setup the EUT as shown in Section 5.1. 5.5.2. Turn on the power of all equipments. 5.5.3. Let the EUT work in test mode and test it.
5.6. Test Procedure 5.6.1. The EUT and its simulators are placed on a table that is 0.8 meter above the ground. The EUT is set 3 meters away from the transmitting antenna that is mounted on an antenna tower. Both horizontal and vertical polarizations of the antenna are set on test. Each of the four sides of EUT must be faced this transmitting antenna and measured individually. In order to judge the EUT performance, a CCD camera is used to monitor the EUT. 5.6.2. All the scanning conditions are as follows: Condition of Test ---------------------------------------------1. Fielded Strength 2. Radiated Signal 3. Scanning Frequency 4. Sweeping time of radiated 5. Dwell Time
Remarks ------------------------------------3 V/m (Severity Level 2) Modulated 80 - 1000 MHz 0.0015 decade/s 1 Sec.
5.7.Test Results PASS. Detailed information, Please refer to the following page.
Page 14 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
RF Field Strength Susceptibility Test Results Hi-Speed USB 2.0 2.5 inches EUT
: SATA external hard drive
Temperature : 25℃
enclosure M/N
: 130028
Power Supply : DC 5V Modulation:
; AM
Pulse
Humidity
: 55%
Test Mode
: ON
None 1 KHz 80%
Frequency Range: Steps Front Right Rear Left
#
80MHz to 1000 MHz /
%
Horizontal
Vertical
Pass Pass Pass Pass
Pass Pass Pass Pass
Test Equipment: See Clause 2.
Note:
Page 15 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
APPENDIX I Radiated Emission Test Data
Page 16 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
Radiated Emission
Engineer : Grace EUT : Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure Limit : EN 55022 Class B MN: 130028 Power : DC 5V
Page 17 of 23
Time : 2011/07/16 Comment : 25℃/55﹪ Note : Hor
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
Radiated Emission
Engineer : Grace EUT : Hi-Speed USB 2.0 2.5 inches SATA external hard drive enclosure Limit : EN 55022 Class B MN: 130028 Power : DC 5V
Page 18 of 23
Time : 2011/07/16 Comment : 25℃/55﹪ Note : Ver
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
APPENDIX II Photographs of the EUT
Page 19 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
FIGURE 1
FIGURE 2
Page 20 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
FIGURE 3
FIGURE 4
Page 21 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
FIGURE 5
FIGURE 6
Page 22 of 23
ShenZhen Outest Technology Co., Ltd
Report No.: OTE110701168-01
FIGURE 7
********* End of this report *********
Page 23 of 23