ProFlow - ProOne Energy
Powered by
Technology
ProFlow Production Fluid ™
Increases Production - Reduces Wear - Decreases Maintenance Costs Using ProOne’s XPL+® Lubrication Technology which bonds to metal, dramatically reducing friction and wear, ProFlow was developed for the Oil & Gas Production market to solve the problem of inefficient production and untimely wear and failure.
Progressive Cavity Pumps (PC Pumps) • Immediate reduction in torque of 25-40% • Allows for 33% or more increase in RPM and additional fluid volume • Reduces the electrical load on the pump system by 20% or more • Bonds to sucker rods, tubing, plungers and other metal parts which reduces friction and untimely wear • Extends maintenance cycles and lifespan of treated pump system parts • Acts as a conditioner and lubricator in the PC pump’s stator • Helps encapsulate sand and other foreign debris to reduce abrasive damage to the composite stator • Helps clean perfs enabling better flow of the production fluid and less torque moving the fluid up the well and out to the production line • Helps inhibit rust and corrosion Treat Rate: Extremely cost effective because it is water-soluble, without reducing the effectiveness of the lubrication. Daily treat rate is 6-15 gallons of product, mixed at 10:1 to 20:1 with water, depending on production
Gas Condensation Production Operations
Surface pumps used to transfer gas condensation in fluid form • Extends life of fast-failing surface pumps in gas condensate production • Reduces pump replacement, downtime, and labor costs • Pumps immediately run smoother and quieter Treat Rate: 3 gallons of raw product per day at 10:1 dilution.
ProOne Inc. 10497 Town & Country Way, #700 Houston, Texas 77024 Phone: (832) 516-6700 Fax: (832) 516-6701 ProOne Inc. 940 South Coast Drive, Suite 200 Costa Mesa, CA 92626 Phone: (714) 327-0262 Fax: (949) 777-6111 www.pro1energy.com
Technology
ProFlow Production Fluid ™
Increases Production - Reduces Wear - Decreases Maintenance Costs Using ProOne’s XPL+® Lubrication Technology which bonds to metal, dramatically reducing friction and wear, ProFlow was developed for the Oil & Gas Production market to solve the problem of inefficient production and untimely wear and failure.
Progressive Cavity Pumps (PC Pumps) • Immediate reduction in torque of 25-40% • Allows for 33% or more increase in RPM and additional fluid volume • Reduces the electrical load on the pump system by 20% or more • Bonds to sucker rods, tubing, plungers and other metal parts which reduces friction and untimely wear • Extends maintenance cycles and lifespan of treated pump system parts • Acts as a conditioner and lubricator in the PC pump’s stator • Helps encapsulate sand and other foreign debris to reduce abrasive damage to the composite stator • Helps clean perfs enabling better flow of the production fluid and less torque moving the fluid up the well and out to the production line • Helps inhibit rust and corrosion Treat Rate: Extremely cost effective because it is water-soluble, without reducing the effectiveness of the lubrication. Daily treat rate is 6-15 gallons of product, mixed at 10:1 to 20:1 with water, depending on production
Gas Condensation Production Operations
Surface pumps used to transfer gas condensation in fluid form • Extends life of fast-failing surface pumps in gas condensate production • Reduces pump replacement, downtime, and labor costs • Pumps immediately run smoother and quieter Treat Rate: 3 gallons of raw product per day at 10:1 dilution.
ProOne Inc. 10497 Town & Country Way, #700 Houston, Texas 77024 Phone: (832) 516-6700 Fax: (832) 516-6701 ProOne Inc. 940 South Coast Drive, Suite 200 Costa Mesa, CA 92626 Phone: (714) 327-0262 Fax: (949) 777-6111 www.pro1energy.com
