PROS – Providence Small Housing Scale

PROS – Providence Small Housing Scale

TYPE

• Die cast aluminum construction for reliability, robust

• Slips over a 3"/75mm pole for mounting



• IP55 rating

construction and corrosion resistance

• Powder coat finish in 13 standard colors with a polymer primer sealer

• Tool-less access and removal of lamp and ballast • Direct full cutoff optical system • Indirect asymmetric and symmetric cut-off optical systems 1. LUMINAIRE

2. LAMP/LED

3. COLOR

4. OPTIONS

3. COLOR

1. LUMINAIRE DIRECT REFLECTIVE OPTICAL SYSTEM

 PROS-DIRS (Symmetric Compact fluorescent and Metal Halide)

2. LAMP/BALLAST ELECTRONIC METAL HALIDE PGJ5 base, Mini Mastercolor lamp.

 20MMC

 39MMC

G12 base, T-6 ceramic lamp  39MHT6EB

 70MHT6EB

COMPACT FLUORESCENT (Specify wattage. -18°C minimum starting temp) GX24q base, 26, 32 or 42 watt lamp  CF Lamps not included, except LED option.

 AWT (Arctic White)  BLK (Black)  MTB (Matte Black)  DGN (Dark Green)  DBZ (Dark Bronze)  WRZ (Wheathered Bronse)  BRM (Metallic Bronze)  VBL (Verde Blue)

 CRT (Corten)  MAL (Matte Aluminum)  MDG (Medium Grey)  ATG (Antique Green)  LGY (Light Grey)  RAL/PREMIUM

PROS

SPECIFICATIONS

REFLECTOR MODELS - REFLECTOR/LAMP The upper lamp housing shall be die cast aluminum. The internal reflector module is sealed from the outer housing with a one piece, memory retentive, molded silicone gasket. The tempered glass lens shall be COLOR (Provide RAL) sealed to the housing with a silicone gasket.  CUSTOM COLOR One stainless steel latch shall release the (Provide color chip for matching) door to allow access to the lamp.

4. OPTIONS

 SPK (Decorative spike)  PFN (Finial painted brass)  BPS (Struts painted brass)  HSS (House side shield, not available for Type 5. Factory installed.)

 LDL (Lightly diffused lens. Frosted, flat tempered glass lens has

a lightly diffused finish to minimize the lamp and reflector brightness.)

 AD4 (Adapter used only with standard AAL arms and post top mount fixtures to slip over a 4"/100mm O.D. pole)

5. MOUNTING – Optional

One-piece cast aluminum arms accept the standard 3" slip fitter on the Providence fixture. The arms are prewired with quick disconnects. Wall mounted arms do not include wall mounting hardware. Pole mounted arms use 3/8-16 hardware bolts for attaching to the pole. WALL MOUNT  WMA59D (Mount down)

5. MOUNTING

 WMA59U (Mount up)

POLE MOUNT ( Side mounts to a 4" O.D. pole.)

 TRA59D (Mount down)  TRA59U (Mount up)

The reflector module shall be composed of a spun, specular aluminum panel rigidly attached in a die cast aluminum housing. The horizontal lamp reflectors (DIRS) shall meet ANSI-IES standards for full cutoff reflector systems. REFLECTOR MODELS - BALLAST The lower ballast housing shall be cast aluminum. The tool-less ballast access for servicing is accomplished by a quarter turn motion of the top cover. The ballast shall be mounted on a prewired tray with a quick disconnect plug attached to the underside of the cover. HID ballasts are high power factor, rated for -30°C starting. Electronic ballasts for metal halide lamps are sound rated A. Sockets are medium base, G12 for use with T6 lamps. All sockets are pulse rated porcelain. All configurations shall accept 120 through 277 volt input. Compact fluorescent ballasts are rated for -18°C

Visit www.aal.net for Arms, Poles & Accessories Specification Guide

See next page

JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15

NOTES

| 1 |

Photometric Report Wednesday, July 11, 2012

CATALOG NUMBER: PROS-H5-70MH

PROS – Providence Small Housing Scale FILENAME: PROS-H5-70MH.IES

TYPE

Photometric Report

IESNA:LM-63-2002 [TEST] 22667 CATALOG NUMBER: PROS-H5-70MH INSTALLATION & MOUNTING[ISSUEDATE] 8-21-07 DIMENSIONS FILENAME: PROS-H5-70MH.IES [MANUFAC] ARCHITECTURAL AREA LIGHTING The PROS shall be factory supplied as PROS-H5-70MH a complete, Weight: 29lbs. EPA: 1.30 [LUMCAT] IESNA:LM-63-2002 PROVIDENCE [TEST] prewired assembly. The fixture[LUMINAIRE] shall slip over a 22667 FULL CUT-OFF POST TOP LUMINAIRE 18.7 in / 475 mm [ISSUEDATE]RELFECTOR 8-21-07 [MORE] WITH SPECULAR AND CLEAR FLAT GLASS LENS 11.52"/293mm 3"/75mm open top pole or 4"/100mm pole mounted [MANUFAC] ARCHITECTURAL AREA LIGHTING [LAMPCAT] CDM70/T6/830/G12E [LUMCAT] PROS-H5-70MH [LAMP] ONE GE 70 WATT arm and secured and leveled with 3 stainless steel CMH T6 LAMP G12E BASE [LUMINAIRE] PROVIDENCE FULL CUT-OFF POST TOP LUMINAIRE [MORE] LUMENS=6200

set screws.

Wednesday, July 11, 2012

[MORE] WITH SPECULAR RELFECTOR AND CLEAR FLAT GLASS LENS [LAMPCAT] CDM70/T6/830/G12E

SUMMARY DATA [LAMP] ONE GE 70 WATT CMH T6 LAMP G12E BASE [MORE] LUMENS=6200

EFFICIENCY (Total):

35.8 %

CONTROLS SUMMARY EFFICIENCY (Down / Up): DATA 35.8 % / 0.0 % EFFICIENCY (Street / House): 20.8 % / 15.0 % • SCP shall have an integral surge protection EFFICIENCY (Total): 35.8SHORT % ROADWAY CLASSIFICATION: TYPE I, VERY EFFICIENCY (Down / Up): 35.8 % / 0.0 % CLASSIFICATION: FULL CUTOFF device with a currentt ratingCUTOFF of 10,000 Amps 31.5 in / 800 EFFICIENCY (Street / House): 20.8 % / 15.0 % mm 19.44"/494mm UMENS/LAMP:ROADWAY CLASSIFICATION: 6200 TYPE I, VERY SHORT using the industry standardLN8/20uSec and O. OF LAMPSwave :CUTOFF CLASSIFICATION: 1 FULL CUTOFF LUMINOUS OPENING: CIRCULAR 6200 sure rating of 372J LUMENS/LAMP: Diameter: 1.00 (Feet) 1 NO. OF LAMPS: • Sensor not intended for useINwith additional PUT W ATTS: LUMINOUS OPENING: 82 CIRCULAR Diameter: 1.00 (Feet) photo-control, wireless control or dimming INPUT WATTS: 82 systems. FINISH Fixture finish consists of a five stage pretreatment regimen with a polymer primer sealer, oven dry off and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.

Weight: 9 LBS EPA: 0.46

PROS H5 70MH WATTAGE: 82

LUMEN OUTPUT: 2221

ISO-ILLUMINANCE DIAGRAM ISO-ILLUMINANCE DIAGRAM (fc) (fc)

B1 U0 G0 CERTIFICATION The fixture shall be listed with ETL for outdoor, wet location use, UL1598 and Canadian CSA Std. C22.2 no.250. IP=55. WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/warranty/ Contact AAL for complete warranty language, exceptions, and limitations.

FORWARD LIGHT LUMEN FL 30 o 13.3% 822 6.8% 419 FM 60 o o FH 80 0.7% 46 0% 2 FVH 90 o BACK LIGHT BL 30 o BM 60 o BH 80 o BVH 90 o

8.0% 6.6% 0.4% 0%

498 409 26 2

UPLIGHT UL 100 o UH 180 o

0% 0%

0 0

0.01 0.02 0.05

0.1 0.2 0.5 0.01 5. 1. 0.02 0.05 2. 10. 0.1 0.2 0.5 5. 1. 2. 10.

EFFICACY: 75.6 Mounting Mounting Height Height --------------------10 10 15 15 20 20 25 30 25 35 30 40 35 45 40 50 45 50

Multiplier Multiplier --------------------------4.000 4.000 1.778 1.778 1.000 1.000 0.640 0.444 0.640 0.327 0.444 0.250 0.327 0.198 0.250 0.160 0.198 0.160

UPLIGHT 0% DOWNLIGHT 100% + = Point of max candela

20' MOUNTING Mounting Height =HEIGHT 20 Feet. Each box represents one mounting height.

+ = Point of max candela Mounting Height = 20 Feet. Each box represents one mounting height.

Reported data calculated from manufacturer's data file, based on IESNA recommended methods.

Photometric Viewer v3.4 Reported data calculated from manufacturer's data file, based on IESNA recommended methods.

Photometric Viewer v3.4

20' MOUNTING HEIGHT

AAL reserves the right to change product specifications without notice.

IES files can be found at www.aal.net

ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15

| 2 |