Protective Cabinet
Protective Cabinet STI-7554, STI-7555 and STI-7555AED
Features · Clear, protective polycarbonate cover with siren/strobe alarm. · Design allows visibility at any angle. · Complete with mounting hardware and gasket. · Includes wire shelf, backing plate and siren/strobe alarm — AED models · External mounting tabs or internal drill dimples. · Cover includes a coated steel internal mounting plate with a baked on white enamel finish. · Siren/strobe alarm lens is red. Also available with amber, green, blue or white lens. · Siren offers 32 user selectable tones. · Alarm can be set for a piercing 100 dB or 85 dB. · Independent strobe and siren timing of 15 seconds, 30 seconds, 60 seconds or continuous. · Powered by a 9 VDC battery or external 12-30 volts. · Low battery indicator.
We protect the things that protect you.® -1-
Table of Contents Warnings..................................................................................................................... page 2 Cleaning Instructions .................................................................................................. page 2 Dimensions.................................................................................................................. page 3 Specifications ............................................................................................................. page 3 Installation of Cabinet ................................................................................................. page 4 Installation of Alarm..................................................................................................... page 4 Alarm Electronic Setup................................................................................................ page 5 Alarm Tones ............................................................................................................... page 5 Alarm Timing and Volume............................................................................................ page 5 Alarm Terminal Strip Connections................................................................................ page 6 Alarm Electronics Assembly......................................................................................... page 6 Assembly Parts List .................................................................................................... page 7 Operation ................................................................................................................... page 7 Warranty...................................................................................................................... page 8 Accessories & Replacement Parts............................................................................... page 8
Warnings
All units are recommended for indoor use. Unit must be tested periodically to verify the life of battery. STI recommends you change the 9 Volt battery twice a year. When purchasing a siren/ strobe alarm, you will need to periodically test the connections to make sure audibles function at a sound level to alert staff. Installer may need to purchase a simple audio-meter, typically 4.31 in. 23.5 in. (109mm) available at your local electronics store, to measure the sound in areas where the alarm is (597mm) expected to be heard during normal noise environment. Results from this test may prove it 16.5 in. 12.2 in. beneficial to purchase additional siren/strobe alarm units. (419mm) (310mm) All specifications and information shown are current as of publication and subject to change 6.44 in. (164mm) 14.2 in. without notice. (360mm)
Cleaning
3/8” DIAMETER
1. Rinse cover with water to remove abrasive dust and dirt. FRONT R.H.NOT SIDESCRUB.) 2. Wash with soap or mild detergent using a soft cloth. (DO 3. Rinse once more, then dry with a soft cloth or chamois. STI-7535AED 4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
Dimensions
R.H. SIDE
4.31 in. (109mm)
33.75 in. (857mm)
19.75 in. (502mm)
24.75 in. (629mm)
FRONT
3/8” DIAMETER 7.31 in. (186mm)
-2-
R.H. SIDE
Specifications Operating Voltage
Internal power 9 VDC battery (not included)
Remote power 12-30 VDC
OPERATING TEMPERATURE
32°F -120°
Power Consumption
Stand by: 50µA
Siren low volume: 85mA
Siren high volume: 90mA
Strobe: 25mA
Siren Volume
Low: 85 dB
High: 100 dB
Alarm Timing
Independent control for siren and strobe:
15s, 30s, 60s, continuous
Low Battery Warning
LED flash once every 30 seconds
Form C Dry Contacts
0-30VAC/DC, 1 Amp
RATED FOR
Contacts reset after longest alarm setting
Key Switch
Alarm on: normally closed
Alarm Switch
Stand by: normally open contact required
Polycarbonate UL94V-2 Flammability Rating
Installation of Cabinet Note Installation of cabinet should be before installation of alarm because the mounting bracket butts up to cabinet. 1. Insert the (4 or 6) mounting tabs fully into backbox mounting tab slots. Use rubber mallet if necessary.
06298 MOUNTING TABS (6) PROVIDED 19013 SCREW #10 x 1 1/2 in. (6) PROVIDED
2. After selecting a suitable location, place cabinet in closed position, against the wall. Mark and drill (4 or 6) 1/4 in. diameter holes. 04876 Insert the (4 or 6) 19033 anchors. MOUNTING Mount cabinet by driving PLATE in the four or six 07551WR WIRE RACK (INCLUDED WITH #10 x 1 1/2 in. screws. 3. For AED model install shelf, close and lock cabinet.
AED MODEL) 19002 #8-32 x 3/8 in. SCREWS AND (4) 19055 #8-32 KEPS NUTS PROVIDED 19002 SCREW #8-32 x 3/8 in. (4) PROVIDED
OPTIONAL TAB MOUNTING LOCATION
6297550 GASKET 19033 ANCHOR (6) PROVIDED
07550WR WIRE SHELF ON AED MODELS (ADJUSTABLE)
-3-
ROTARY ACTION LATCH (2) PROVIDED SHOWN WITH COVER CLOSED
H
12-24 VDC, 125mA
Installation of Alarm
NC C OM NO
-
Step 1 - Mounting Options To Key Mount Plate or into Wall without Electrical Box OFF
ACTIVE
ON
DRILL 3/16 DIA HOLES
**MAIN POWER CONTROL
NORMALLY OPEN STAND BY
COM
NORMALLY CLOSED
FORM "C" DRY CONTACTS
SUB-SA505 KEY SWITCH MOUNTING ALARM BRACKET SWITCH 18074 SWITCH LOCK
18075 REPLACEMENT #801 KEY
3 9/32 in.
BASE PLATE 19039 SCREW #6 x 1 1/4 in. (2) PROVIDED
19018 ANCHOR #8-10 (2) PROVIDED
+
REMOTE POWER IN 12-24 VDC, 125mA
DC IN
+
-
-
OFF
EY SWK ITCH
ON
A AR M SWLIT CH
**MAIN POWER CONTROL
NC C OM NO
ROUTE THE TWO KEY SWITCH WIRES THROUGH THE HOLE AS SHOWN
NORMALLY OPEN COM
NORMALLY CLOSED ROUTE THE TWO REED ACTIVE FORM "C" SWITCH WIRES FROM ENCLOSURE DRY CONTACTS STAND CABINET THROUGH THE BY HOLE AS SHOWN ALARM SWITCH WIRE ACCESS HOLE
Step 2 - Electronic Setup Select Alarm Tone and Timing Sequence
S1 SIREN
ALARM TONES
S2 LED QTY 10 BATTERY LOW BATTERY INDICATOR LED
ALARM TIMING STROBE TIMING VOLUME ROUTE THE TWO KEY SWITCH WIRES THROUGH THE HOLE AS SHOWN
ROUTE THE TWO REED SWITCH WIRES FROM CABINET THROUGH THE HOLE AS SHOWN BATTERY CABLE WIRE ACCESS HOLE WIRE ENTRY
ENCLOSURE
TERMINAL STRIP
TAMPER SWITCH (REAR VIEW)
Note Select-Alert must be on a flat surface and lens must be installed or the tamper switch will trigger the alarm.
-4+
D
S2
S1
ALARM TIMING
TIMING Step 3 BATTERY - AlarmSTROBE Tones - S1 VOLUME
* 1 2 3 4 5 WIRE ENTRY 6 7 8 9 10 11 12 13 14 15 16
12345 00000 10000 01000 11000 BATTERY CABLE 00100 10100 01100 11100 00010 10010 01010 11010 00110 10110 01110 11110
SIREN
ALARM TONES
ALA
BUZZ SLOW ON/OFF SLOW SIREN 3 BEEP/PAUSE/REPEAT UFO FAST FAST SIREN #5 FAST #2 MEDIUM #5 MEDIUM SWOOP MEDIUM #3 MEDIUM BUZZ TONE STEADY FAST SWOOP SLOW CONTINUOUS FAST REPEAT
LED QTY 10 STRO 12345 V 00001 STANDARD ALARM BATTERY LOW BATTERY 10001 #3 FAST INDICATOR LED 01001 #5 SLOW TERMINAL STRIP BATTERY CAB 11001 FAST BEEP WIRE ENTRY TAMPER00101 SWITCH SOUND A (REAR VIEW) 10101 SOUND B 01101 SOUND C 11101 SOUND D 00011 SOUND D LOUD 10011 SOUND E 01011 SOUND F 11011 SOUND G 00111 SOUND H + DC IN + 10111 #4 LOW REMOTE POWER IN NC CO - OFF ON M N 12-24 01111 VDC, 125mA O SOUND K (OPTIONAL) 11111 MAIN POWER CONTINUOUS FAST NORMALLY OPEN
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Y SWKE ITCH
CONTROL TO KEY SWITCH
COM
ACTIVE REED
Step 4 - Alarm Timing and Volume - S2 ALARM TIMING
1
NORMALLY CLOSED
FORM "C" STAND DRY CONTACTS BY
SWITCH FROM by CABINET Note Sound may be disabled clipping wires to the siren. THIS WILL VOID ALL WARRANTIES. Remove two screws on circuit board; leave enough length of wire to possibly reattach in the future. Then insulate wires to prevent shorting to electronic components.
WIRES TO SIREN
1
A R M SWLA ITCH
2
STROBE TIMING
3
4
VOLUME
5
ON
0 OFF ALARM SIREN STROBE VOLUME TIMING 1 2 3 4 5 15 seconds 1 1 1 1 * High 30 seconds 1 0 1 0 1 60 seconds 0 1 0 1 Low Continuous 0 0 0 0 2 1 = ON 0 = OFF *Factory default settings
-5-
(4) PROVIDED
Step 5 - Electronics Assembly Wiring: After mounting circuit board assembly, connect wires. Refer to terminal strip connections (step 6). Lens installation: Slide lip of lens behind circuit board mounting plate. Rotate lens into position. Secure with tamperproof screw and special. Unit will not operate properly if lens cover is not installed.
ELECTRONICS
TO STI B 05050- LENS COLORS A - AMBER B - BLUE G - GREEN R - RED W - WHITE
INSTALLED BASE PLATE
19011 TAMPER-PROOF SCREW 19016 TAMPER-PROOF TOOL (1) PROVIDED
ROUTE WIRES THRU HOLE WIRE ACCESS HOLE
+
DC IN
+
19002 SCREW #8-32 x 3/8 in. (4) PROVIDED
-
EY SWK ITCH
A R M SWLIA TCH
REMOTE POWER IN 12-24 VDC, 125mA
NC C OM NO
-
NORMALLY OPEN OFF
ACTIVE
ON
**MAIN POWER
STAND BY
NORMALLY CLOSED
FORM "C" DRY CONTACTS
ALARM SWITCH
CONTROL
COM
Step 6 - Terminal Strip Connections
+
REMOTE POWER IN 12-24 VDC, 125mA
+
DC IN
-
-
OFF
EY SWK ITCH
ON
A AR M SWLIT CH
**MAIN POWER
NC C OM NO
NORMALLY OPEN
CONTROL
COM ACTIVE
ALARM SWITCH
NORMALLY CLOSED
FORM "C" STAND DRY CONTACTS BY
-6-
Note “DC IN” are the only polarity sensitive terminals. When external power is used, battery will act as a backup. “Dry Contacts: NC, COM, NO” are used for remote alarm monitoring.
Assembly Parts List SIREN/STROBE ALARM QTY. 1 1 1 2 1 1 4 2 2 1 1
PART # 05000 05050-R 09723 18075 18074 18151 19002 19039 19018 19011 BAT-9VDC
DESCRIPTION Electronics assembly (includes base plate & electronics assembly) Red lens (unless otherwise specified) Key switch mounting bracket #801 key Switch lock N.C. reed switch and magnet (installed in cabinet) Screw #8-32 x 3/8 in. Screw #6 x 1 1/4 in. Anchor #8-10 #8-32 x 1/2 in. tamper screw 9 volt battery
CABINET 1 6 6 6 1 1 1 4 1 1 1 2
07550 06298 19013 19033 07550WR 07551WR 04876 19002 6297550 07503 18050 18054
Hinged polycarbonate enclosure Mounting tabs #10 x 1 1/2 in. screw Plastic anchor Wire shelf (included with AED models only) Wire rack (included with AED models only) Mounting plate #8-32 x 3/8 in. screw Gasket Thumb lock - STI-7555 models Key lock STI-7554 models CH751
}
Step 7 - Operation · Turn key switch onto arm. · Cycle key switch to reset alarm · Alarm will sound when cabinet is opened (alarm switch is electronically closed), alarm cover is removed or unit is removed from the wall. · To service, turn key switch off.
Warnings
Three year guarantee against breakage of polycarbonate housing (one year on electro mechanical and electronic components). Electronic warranty form at www.sti-usa.com/wc14.
-7-
Accessories and Replacement Parts AED-LBL
Optional AED label - 2 included (applied to sides of cabinet; must be factory installed)
STI-SA5000-R
Replacement Siren/Strobe Alarm
18054
Replacement key for cabinet lock on STI-7554
18075
Replacement key for Siren/Strobe Alarm
07550WR
Wire shelf (included with AED models)
07551WIR
Wire rack (included with AED models)
2306 Airport Rd • Waterford, MI 48327 Phone: 248-673-9898 • Fax: 248-673-1246 [email protected] • www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • E-mail: [email protected] • Web: www.sti-europe.com
Printed in USA
Subject to change without notice.
-8-
Inst. 7555AED 2015_05
Features · Clear, protective polycarbonate cover with siren/strobe alarm. · Design allows visibility at any angle. · Complete with mounting hardware and gasket. · Includes wire shelf, backing plate and siren/strobe alarm — AED models · External mounting tabs or internal drill dimples. · Cover includes a coated steel internal mounting plate with a baked on white enamel finish. · Siren/strobe alarm lens is red. Also available with amber, green, blue or white lens. · Siren offers 32 user selectable tones. · Alarm can be set for a piercing 100 dB or 85 dB. · Independent strobe and siren timing of 15 seconds, 30 seconds, 60 seconds or continuous. · Powered by a 9 VDC battery or external 12-30 volts. · Low battery indicator.
We protect the things that protect you.® -1-
Table of Contents Warnings..................................................................................................................... page 2 Cleaning Instructions .................................................................................................. page 2 Dimensions.................................................................................................................. page 3 Specifications ............................................................................................................. page 3 Installation of Cabinet ................................................................................................. page 4 Installation of Alarm..................................................................................................... page 4 Alarm Electronic Setup................................................................................................ page 5 Alarm Tones ............................................................................................................... page 5 Alarm Timing and Volume............................................................................................ page 5 Alarm Terminal Strip Connections................................................................................ page 6 Alarm Electronics Assembly......................................................................................... page 6 Assembly Parts List .................................................................................................... page 7 Operation ................................................................................................................... page 7 Warranty...................................................................................................................... page 8 Accessories & Replacement Parts............................................................................... page 8
Warnings
All units are recommended for indoor use. Unit must be tested periodically to verify the life of battery. STI recommends you change the 9 Volt battery twice a year. When purchasing a siren/ strobe alarm, you will need to periodically test the connections to make sure audibles function at a sound level to alert staff. Installer may need to purchase a simple audio-meter, typically 4.31 in. 23.5 in. (109mm) available at your local electronics store, to measure the sound in areas where the alarm is (597mm) expected to be heard during normal noise environment. Results from this test may prove it 16.5 in. 12.2 in. beneficial to purchase additional siren/strobe alarm units. (419mm) (310mm) All specifications and information shown are current as of publication and subject to change 6.44 in. (164mm) 14.2 in. without notice. (360mm)
Cleaning
3/8” DIAMETER
1. Rinse cover with water to remove abrasive dust and dirt. FRONT R.H.NOT SIDESCRUB.) 2. Wash with soap or mild detergent using a soft cloth. (DO 3. Rinse once more, then dry with a soft cloth or chamois. STI-7535AED 4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
Dimensions
R.H. SIDE
4.31 in. (109mm)
33.75 in. (857mm)
19.75 in. (502mm)
24.75 in. (629mm)
FRONT
3/8” DIAMETER 7.31 in. (186mm)
-2-
R.H. SIDE
Specifications Operating Voltage
Internal power 9 VDC battery (not included)
Remote power 12-30 VDC
OPERATING TEMPERATURE
32°F -120°
Power Consumption
Stand by: 50µA
Siren low volume: 85mA
Siren high volume: 90mA
Strobe: 25mA
Siren Volume
Low: 85 dB
High: 100 dB
Alarm Timing
Independent control for siren and strobe:
15s, 30s, 60s, continuous
Low Battery Warning
LED flash once every 30 seconds
Form C Dry Contacts
0-30VAC/DC, 1 Amp
RATED FOR
Contacts reset after longest alarm setting
Key Switch
Alarm on: normally closed
Alarm Switch
Stand by: normally open contact required
Polycarbonate UL94V-2 Flammability Rating
Installation of Cabinet Note Installation of cabinet should be before installation of alarm because the mounting bracket butts up to cabinet. 1. Insert the (4 or 6) mounting tabs fully into backbox mounting tab slots. Use rubber mallet if necessary.
06298 MOUNTING TABS (6) PROVIDED 19013 SCREW #10 x 1 1/2 in. (6) PROVIDED
2. After selecting a suitable location, place cabinet in closed position, against the wall. Mark and drill (4 or 6) 1/4 in. diameter holes. 04876 Insert the (4 or 6) 19033 anchors. MOUNTING Mount cabinet by driving PLATE in the four or six 07551WR WIRE RACK (INCLUDED WITH #10 x 1 1/2 in. screws. 3. For AED model install shelf, close and lock cabinet.
AED MODEL) 19002 #8-32 x 3/8 in. SCREWS AND (4) 19055 #8-32 KEPS NUTS PROVIDED 19002 SCREW #8-32 x 3/8 in. (4) PROVIDED
OPTIONAL TAB MOUNTING LOCATION
6297550 GASKET 19033 ANCHOR (6) PROVIDED
07550WR WIRE SHELF ON AED MODELS (ADJUSTABLE)
-3-
ROTARY ACTION LATCH (2) PROVIDED SHOWN WITH COVER CLOSED
H
12-24 VDC, 125mA
Installation of Alarm
NC C OM NO
-
Step 1 - Mounting Options To Key Mount Plate or into Wall without Electrical Box OFF
ACTIVE
ON
DRILL 3/16 DIA HOLES
**MAIN POWER CONTROL
NORMALLY OPEN STAND BY
COM
NORMALLY CLOSED
FORM "C" DRY CONTACTS
SUB-SA505 KEY SWITCH MOUNTING ALARM BRACKET SWITCH 18074 SWITCH LOCK
18075 REPLACEMENT #801 KEY
3 9/32 in.
BASE PLATE 19039 SCREW #6 x 1 1/4 in. (2) PROVIDED
19018 ANCHOR #8-10 (2) PROVIDED
+
REMOTE POWER IN 12-24 VDC, 125mA
DC IN
+
-
-
OFF
EY SWK ITCH
ON
A AR M SWLIT CH
**MAIN POWER CONTROL
NC C OM NO
ROUTE THE TWO KEY SWITCH WIRES THROUGH THE HOLE AS SHOWN
NORMALLY OPEN COM
NORMALLY CLOSED ROUTE THE TWO REED ACTIVE FORM "C" SWITCH WIRES FROM ENCLOSURE DRY CONTACTS STAND CABINET THROUGH THE BY HOLE AS SHOWN ALARM SWITCH WIRE ACCESS HOLE
Step 2 - Electronic Setup Select Alarm Tone and Timing Sequence
S1 SIREN
ALARM TONES
S2 LED QTY 10 BATTERY LOW BATTERY INDICATOR LED
ALARM TIMING STROBE TIMING VOLUME ROUTE THE TWO KEY SWITCH WIRES THROUGH THE HOLE AS SHOWN
ROUTE THE TWO REED SWITCH WIRES FROM CABINET THROUGH THE HOLE AS SHOWN BATTERY CABLE WIRE ACCESS HOLE WIRE ENTRY
ENCLOSURE
TERMINAL STRIP
TAMPER SWITCH (REAR VIEW)
Note Select-Alert must be on a flat surface and lens must be installed or the tamper switch will trigger the alarm.
-4+
D
S2
S1
ALARM TIMING
TIMING Step 3 BATTERY - AlarmSTROBE Tones - S1 VOLUME
* 1 2 3 4 5 WIRE ENTRY 6 7 8 9 10 11 12 13 14 15 16
12345 00000 10000 01000 11000 BATTERY CABLE 00100 10100 01100 11100 00010 10010 01010 11010 00110 10110 01110 11110
SIREN
ALARM TONES
ALA
BUZZ SLOW ON/OFF SLOW SIREN 3 BEEP/PAUSE/REPEAT UFO FAST FAST SIREN #5 FAST #2 MEDIUM #5 MEDIUM SWOOP MEDIUM #3 MEDIUM BUZZ TONE STEADY FAST SWOOP SLOW CONTINUOUS FAST REPEAT
LED QTY 10 STRO 12345 V 00001 STANDARD ALARM BATTERY LOW BATTERY 10001 #3 FAST INDICATOR LED 01001 #5 SLOW TERMINAL STRIP BATTERY CAB 11001 FAST BEEP WIRE ENTRY TAMPER00101 SWITCH SOUND A (REAR VIEW) 10101 SOUND B 01101 SOUND C 11101 SOUND D 00011 SOUND D LOUD 10011 SOUND E 01011 SOUND F 11011 SOUND G 00111 SOUND H + DC IN + 10111 #4 LOW REMOTE POWER IN NC CO - OFF ON M N 12-24 01111 VDC, 125mA O SOUND K (OPTIONAL) 11111 MAIN POWER CONTINUOUS FAST NORMALLY OPEN
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Y SWKE ITCH
CONTROL TO KEY SWITCH
COM
ACTIVE REED
Step 4 - Alarm Timing and Volume - S2 ALARM TIMING
1
NORMALLY CLOSED
FORM "C" STAND DRY CONTACTS BY
SWITCH FROM by CABINET Note Sound may be disabled clipping wires to the siren. THIS WILL VOID ALL WARRANTIES. Remove two screws on circuit board; leave enough length of wire to possibly reattach in the future. Then insulate wires to prevent shorting to electronic components.
WIRES TO SIREN
1
A R M SWLA ITCH
2
STROBE TIMING
3
4
VOLUME
5
ON
0 OFF ALARM SIREN STROBE VOLUME TIMING 1 2 3 4 5 15 seconds 1 1 1 1 * High 30 seconds 1 0 1 0 1 60 seconds 0 1 0 1 Low Continuous 0 0 0 0 2 1 = ON 0 = OFF *Factory default settings
-5-
(4) PROVIDED
Step 5 - Electronics Assembly Wiring: After mounting circuit board assembly, connect wires. Refer to terminal strip connections (step 6). Lens installation: Slide lip of lens behind circuit board mounting plate. Rotate lens into position. Secure with tamperproof screw and special. Unit will not operate properly if lens cover is not installed.
ELECTRONICS
TO STI B 05050- LENS COLORS A - AMBER B - BLUE G - GREEN R - RED W - WHITE
INSTALLED BASE PLATE
19011 TAMPER-PROOF SCREW 19016 TAMPER-PROOF TOOL (1) PROVIDED
ROUTE WIRES THRU HOLE WIRE ACCESS HOLE
+
DC IN
+
19002 SCREW #8-32 x 3/8 in. (4) PROVIDED
-
EY SWK ITCH
A R M SWLIA TCH
REMOTE POWER IN 12-24 VDC, 125mA
NC C OM NO
-
NORMALLY OPEN OFF
ACTIVE
ON
**MAIN POWER
STAND BY
NORMALLY CLOSED
FORM "C" DRY CONTACTS
ALARM SWITCH
CONTROL
COM
Step 6 - Terminal Strip Connections
+
REMOTE POWER IN 12-24 VDC, 125mA
+
DC IN
-
-
OFF
EY SWK ITCH
ON
A AR M SWLIT CH
**MAIN POWER
NC C OM NO
NORMALLY OPEN
CONTROL
COM ACTIVE
ALARM SWITCH
NORMALLY CLOSED
FORM "C" STAND DRY CONTACTS BY
-6-
Note “DC IN” are the only polarity sensitive terminals. When external power is used, battery will act as a backup. “Dry Contacts: NC, COM, NO” are used for remote alarm monitoring.
Assembly Parts List SIREN/STROBE ALARM QTY. 1 1 1 2 1 1 4 2 2 1 1
PART # 05000 05050-R 09723 18075 18074 18151 19002 19039 19018 19011 BAT-9VDC
DESCRIPTION Electronics assembly (includes base plate & electronics assembly) Red lens (unless otherwise specified) Key switch mounting bracket #801 key Switch lock N.C. reed switch and magnet (installed in cabinet) Screw #8-32 x 3/8 in. Screw #6 x 1 1/4 in. Anchor #8-10 #8-32 x 1/2 in. tamper screw 9 volt battery
CABINET 1 6 6 6 1 1 1 4 1 1 1 2
07550 06298 19013 19033 07550WR 07551WR 04876 19002 6297550 07503 18050 18054
Hinged polycarbonate enclosure Mounting tabs #10 x 1 1/2 in. screw Plastic anchor Wire shelf (included with AED models only) Wire rack (included with AED models only) Mounting plate #8-32 x 3/8 in. screw Gasket Thumb lock - STI-7555 models Key lock STI-7554 models CH751
}
Step 7 - Operation · Turn key switch onto arm. · Cycle key switch to reset alarm · Alarm will sound when cabinet is opened (alarm switch is electronically closed), alarm cover is removed or unit is removed from the wall. · To service, turn key switch off.
Warnings
Three year guarantee against breakage of polycarbonate housing (one year on electro mechanical and electronic components). Electronic warranty form at www.sti-usa.com/wc14.
-7-
Accessories and Replacement Parts AED-LBL
Optional AED label - 2 included (applied to sides of cabinet; must be factory installed)
STI-SA5000-R
Replacement Siren/Strobe Alarm
18054
Replacement key for cabinet lock on STI-7554
18075
Replacement key for Siren/Strobe Alarm
07550WR
Wire shelf (included with AED models)
07551WIR
Wire rack (included with AED models)
2306 Airport Rd • Waterford, MI 48327 Phone: 248-673-9898 • Fax: 248-673-1246 [email protected] • www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • E-mail: [email protected] • Web: www.sti-europe.com
Printed in USA
Subject to change without notice.
-8-
Inst. 7555AED 2015_05
