QUARTET 1612-0-SHR
Product Specifications
QUARTET 1612-0-SHR END USE: Drapery COLORWAYS: Ivory, Piano, Reed DESCRIPTION: Sheer with a clipped geometric pattern REPEAT: 7.5” V x 7.75” H WIDTH: 124” WEIGHT: 4.06 ounces per linear yard CONTENT: 100% Polyester FLAME RESISTANCE – PASSES: NFPA 701 COLORFASTNESS TO CROCKING: AATCC 8 – Wet: Class 5 / Dry: Class 5 COLORFASTNESS TO LIGHT: AATCC 16 (60 hours) – Class 4.5 COUNTRY OF ORIGIN: Turkey NORMAL CARE INSTRUCTIONS: Ensure washer and dryer are free of any burrs or sharp objects that can cause snagging. Machine wash cold (30C-Initial temperature should not exceed 86F). Do Not Bleach. Do Not Tumble Dry. Iron, Steam or Dry, with Low Heat. Dry Clean any Solvent Except Trichlorethylene. SEWING INSTRUCTIONS: For best results we recommend the use of “Ball – Tipped” needles and polyester thread. Adjust tensions carefully. Seams should be consistent with the specifications of ASTM D434. For complete technical details about ASTM D434: http://astm.org LebaT ex recommends the end use of a product as specified on the spec sheet only. It is the customer’s responsibility to determine code compliance if a product is to be used in a way other than its recommended end use. If a product is ultimately selected and installed in an application that it was not intended for, all liability falls to the customer. *Please advise if fabric is being installed in Boston, MA to ensure all necessary fire codes are met. Please note special finishes may need to be applied to the fabric in order to comply with Boston BFD IX-1.
All fabric subject to dye lot variations.
10/27/15
Page 1 of 1
QUARTET 1612-0-SHR END USE: Drapery COLORWAYS: Ivory, Piano, Reed DESCRIPTION: Sheer with a clipped geometric pattern REPEAT: 7.5” V x 7.75” H WIDTH: 124” WEIGHT: 4.06 ounces per linear yard CONTENT: 100% Polyester FLAME RESISTANCE – PASSES: NFPA 701 COLORFASTNESS TO CROCKING: AATCC 8 – Wet: Class 5 / Dry: Class 5 COLORFASTNESS TO LIGHT: AATCC 16 (60 hours) – Class 4.5 COUNTRY OF ORIGIN: Turkey NORMAL CARE INSTRUCTIONS: Ensure washer and dryer are free of any burrs or sharp objects that can cause snagging. Machine wash cold (30C-Initial temperature should not exceed 86F). Do Not Bleach. Do Not Tumble Dry. Iron, Steam or Dry, with Low Heat. Dry Clean any Solvent Except Trichlorethylene. SEWING INSTRUCTIONS: For best results we recommend the use of “Ball – Tipped” needles and polyester thread. Adjust tensions carefully. Seams should be consistent with the specifications of ASTM D434. For complete technical details about ASTM D434: http://astm.org LebaT ex recommends the end use of a product as specified on the spec sheet only. It is the customer’s responsibility to determine code compliance if a product is to be used in a way other than its recommended end use. If a product is ultimately selected and installed in an application that it was not intended for, all liability falls to the customer. *Please advise if fabric is being installed in Boston, MA to ensure all necessary fire codes are met. Please note special finishes may need to be applied to the fabric in order to comply with Boston BFD IX-1.
All fabric subject to dye lot variations.
10/27/15
Page 1 of 1
