Quick Jelly Roll Strip Quilting The Jelly Roll Race You

Report 0 Downloads 24 Views
Quick  Jelly  Roll  Strip  Quilting     The  Jelly  Roll  Race    

    You  can  cut  ¾  inch  strips  or  small  blocks  or  use  Jelly  Roll  2  ½  inch  strips  for  a  whole   quilt  or  any  sized  strips  you  want.     Very  easy,  quick  way  to  get  a  quilt  top  finished.     Using  a  manufacturer’s  jelly  roll  ensure  that  there  are  several  fabrics  all   coordinating,  but  you  can  choose  a  group  of  fabrics  that  look  good  together  and  cut   your  own.    I  used  up  bits  of  fabric  from  various  baby  quilt  projects  in  this   demonstration.     Open  Jelly  Roll  or  cut  40  WOF  (width  of  fabric)  strips  of  coordinating  fabric.     Mix  up  color  randomly.    

  Attach  fabric  strips  end  to  end  with  a  diagonal  joining.  

 

 

    Separate  if  you  chained  the  seams  and  trim  the  triangle  off.    

 

 

  Be  careful  to  leave  a  ¼  inch  seam  allowance.    

  Press  open  the  seams.    

 

 

    Cut  ¼  to  ½  of  the  first  fabric  piece  off  of  the  long  strip  and  set  aside.    

    Line  up  the  ends  of  the  subsequent  very  long  strip  (about  45  yards)  and  sew  them   (right  sides  together)  along  one  very  long  edge.        

    Just  before  the  end,  cut  strip  in  half  and  sew  the  remaining  length  of  strip.    Press   open.    

    Now  you  have  a  half  as  long  strip  (approximately  22  yards)  made  up  of  two  rows.    

    Repeat  by  lining  up  the  ends  and  sew  them  (right  sides  together)  along  one  very   long  edge.      Press  open.     Your  strip  is  now  about  just  under  12  yards  long  and  has  4  rows.    

    Repeat  these  steps  three  more  times.    Your  quilt  will  have  32  rows,  2  inches  each   and  be  about  50  inches  wide.    You  may  now  choose  to  add  a  border  or  not.     Fastest  way  to  piece  a  quilt  top  I  know!