QwikSwap - Global Industrial
QwikSwap ™
QT6100
QwikSwap™ Universal Constant Torque ECM Blower Motor Replacement
An Aftermarket ECM Constant Torque Motor Replacement `` Direct OEM Replacement when combined with any Permanent Split Capacitor (PSC) motor (120 & 208-230 VAC) `` Provides Variable Blower Air Flow (known to improve performance) `` QwikSwap™ automatically selects the best blower speed (Low, Med or High) every time the unit cycles on. `` Provides Improved Humidity Removal (56% improvement at 82°F outdoor air temp, 157% at 97°F outdoor air temp) `` No need to wait for the OEM motor to be ordered `` No motor programming required `` Replaces all OEM Constant Torque Motors 1/3 to 1 HP `` Replaces X13® and SelecTech® Constant Torque ECM motors
`` Quickly wired using existing OEM
motor connection `` Patent-Pending High Efficiency Design with smooth quiet speed changes `` 6,000 Amps, 100 Joules Surge Protection `` Electronics fully conformal coated to protect from moisture `` At 82°F outdoor air temperature, improves EER by 4.8 to 6.6%* `` At 97°F outdoor air temperature, improves EER by 2.1 to 5.2%* *Range depends on model tested, for 80% efficient ECM motor and 60% efficient PSC motor, 5 ton system, 80°F indoor air .
Mainstream Engineering Corporation 1-800-866-3550 www.qwik.com MKTG000193 / 2000828
QwikSwap ™
QT6100
QwikSwap™
Universal Constant Torque ECM Blower Motor Replacement
Simplified Installation Instructions (Fully detailed instructions are included with packaging) QwikSwap™ QT6100
MADE IN THE USA / PATENTS PENDING
J1
C2
C1
J5 1
C7
R4
R7
R6 R5
1
1
Thermistor J4 C3
C4
USE QT6001
C5
C6 +
Q3 Q2 Q1
R2
COM CAP
K2
R1
CAP
K1
R3
K3
TO-252
DPAK
C8 C9
R10 R9 R8
U3
U1
J3
U2
HUMIDITY SENSOR J2
D6 D5 D4 D3 D3
HI
D1
F1 20A, 250VAC SLOW BLOW
L
G
MOV1
N
COM 1
2
3
4
LOW
MED
#5006914 Rev X Rockledge, FL (321) 631-3550
C
MOTOR OUTPUTS
HV AND CONTROL INPUTS
MED
HIGH
LOW
3
5
2 QT6100 QwikSwap™ Specifications Input Voltage
115 VAC or 208-230 VAC
Maximum Steady-State Current
20 Amps
Maximum Blower Hp
1 Hp
Frequency
50 - 60 Hz
Fuse Rating
20 Amps Time Delay
Surge Suppression
6,000 Amps, 100 Joules
Size / Dimensions
4.3” x 5.3”
Supported Accessories
QT6001 Humidity Sensor
For more details or information about QwikSwap™ visit www.qwik.com All marks shown within this document are properties of their respective owners, X13® is a registered Trademark of Regal Beloit and SelecTech® is a registered trademark of Nidec Motor Corporation. QwikProducts™ and QwikSwap™ are trademarks of Mainstream Engineering Corporation. Rockledge, Florida 32955, (321) 631-3550 • All QwikProducts™ are made in the USA. Patent Pending
PROUDLY MADE IN THE U.S.A.
Mainstream Engineering Corporation 1-800-866-3550 www.qwik.com MKTG000193 / 2000828
QT6100
QwikSwap™ Universal Constant Torque ECM Blower Motor Replacement
An Aftermarket ECM Constant Torque Motor Replacement `` Direct OEM Replacement when combined with any Permanent Split Capacitor (PSC) motor (120 & 208-230 VAC) `` Provides Variable Blower Air Flow (known to improve performance) `` QwikSwap™ automatically selects the best blower speed (Low, Med or High) every time the unit cycles on. `` Provides Improved Humidity Removal (56% improvement at 82°F outdoor air temp, 157% at 97°F outdoor air temp) `` No need to wait for the OEM motor to be ordered `` No motor programming required `` Replaces all OEM Constant Torque Motors 1/3 to 1 HP `` Replaces X13® and SelecTech® Constant Torque ECM motors
`` Quickly wired using existing OEM
motor connection `` Patent-Pending High Efficiency Design with smooth quiet speed changes `` 6,000 Amps, 100 Joules Surge Protection `` Electronics fully conformal coated to protect from moisture `` At 82°F outdoor air temperature, improves EER by 4.8 to 6.6%* `` At 97°F outdoor air temperature, improves EER by 2.1 to 5.2%* *Range depends on model tested, for 80% efficient ECM motor and 60% efficient PSC motor, 5 ton system, 80°F indoor air .
Mainstream Engineering Corporation 1-800-866-3550 www.qwik.com MKTG000193 / 2000828
QwikSwap ™
QT6100
QwikSwap™
Universal Constant Torque ECM Blower Motor Replacement
Simplified Installation Instructions (Fully detailed instructions are included with packaging) QwikSwap™ QT6100
MADE IN THE USA / PATENTS PENDING
J1
C2
C1
J5 1
C7
R4
R7
R6 R5
1
1
Thermistor J4 C3
C4
USE QT6001
C5
C6 +
Q3 Q2 Q1
R2
COM CAP
K2
R1
CAP
K1
R3
K3
TO-252
DPAK
C8 C9
R10 R9 R8
U3
U1
J3
U2
HUMIDITY SENSOR J2
D6 D5 D4 D3 D3
HI
D1
F1 20A, 250VAC SLOW BLOW
L
G
MOV1
N
COM 1
2
3
4
LOW
MED
#5006914 Rev X Rockledge, FL (321) 631-3550
C
MOTOR OUTPUTS
HV AND CONTROL INPUTS
MED
HIGH
LOW
3
5
2 QT6100 QwikSwap™ Specifications Input Voltage
115 VAC or 208-230 VAC
Maximum Steady-State Current
20 Amps
Maximum Blower Hp
1 Hp
Frequency
50 - 60 Hz
Fuse Rating
20 Amps Time Delay
Surge Suppression
6,000 Amps, 100 Joules
Size / Dimensions
4.3” x 5.3”
Supported Accessories
QT6001 Humidity Sensor
For more details or information about QwikSwap™ visit www.qwik.com All marks shown within this document are properties of their respective owners, X13® is a registered Trademark of Regal Beloit and SelecTech® is a registered trademark of Nidec Motor Corporation. QwikProducts™ and QwikSwap™ are trademarks of Mainstream Engineering Corporation. Rockledge, Florida 32955, (321) 631-3550 • All QwikProducts™ are made in the USA. Patent Pending
PROUDLY MADE IN THE U.S.A.
Mainstream Engineering Corporation 1-800-866-3550 www.qwik.com MKTG000193 / 2000828
