R exnord 1701 TableTop Chain Multiflex AWS
Chain Drawing DIRECTION OF TRAVEL
Chain Information Chain Width Min. Side-flex Radius Approximate Weight desc in mm in mm lbs/ft kg/m N/A 2.09 53.1 5.75 146.1 0.95 1.42
Chain Pitch 1.97 in (50.0 mm)
Chain Width
Chain Height 0.98 in (24.9 mm)
Min. Back-flex Radius 1.50 in (38.1 mm)
Photo shows 1701 TableTop® Chain molded in Low Friction (LF) material.
Height Over Centerline 0.50 in (12.7 mm)
Min. Side-flex Radius
Guide Clearance (Curve) 2.34 in (59.4 mm)
Guide Clearance (Straight) 2.19 in (55.6 mm)
Thickness 0.18 in (4.5 mm)
Rexnord® 1701 TableTop® Chain
1701
Pin Diameter 0.32 in (8.1 mm)
Available Materials Prefix
Chain Material
LF
Low Friction
BWR HP™ PS® WLF WX
Black Wear Resistant High Performance Platinum Series® White Low Friction Green Abrasion Resistant Polyamide
Temperature Fahrenheit max min min dry wet Standard Materials Stainless Steel -40 180 150 -40 Made-to-Order Materials Stainless Steel -40 180 NR -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 220 NR -40 Standard Pin Material
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. All rights reserved.
Chain Strength lbs
N
FDA Approval
82
66
600
2,669
Yes
82 82 82 82 104
NR 66 66 66 NR
720 600 600 600 600
3,203 2,669 2,669 2,669 2,669
No Yes Yes Yes No
Additional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. Armor-clad cap material is stainless steel. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
TT - 1701- 1
Multiflex
U.S. Patents: 5678682, EP0700843
Celsius max dry wet
Chain Drawing Thickness 0.18 in (4.5 mm)
Chain Width
Guide Clearance Straight 2.34 in (59.5 mm)
TAB Width 2.63 in (66.8 mm)
DIRECTION OF TRAVEL
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Chain Width Min. Side-flex Radius Approximate Weight desc in mm in mm lbs/ft kg/m N/A 2.09 53.1 5.75 146.1 1.00 1.49
Chain Pitch 1.97 in (50.0 mm)
Chain Top to TAB Top 0.75 in (19.1 mm)
Height Over Centerline 0.50 in (12.7 mm) Chain Height 0.98 in (24.9 mm)
Min. Side-flex Radius
Photo shows 1701 TAB TableTop® Chain molded in Low Friction (LF) material.
Guide Clearance Curve 2.25 in (57.2 mm)
Rexnord® 1701 TAB TableTop® Chain
1701 TAB
Pin Diameter 0.32 in (8.1 mm)
Available Materials Chain Material
Prefix
BWR LF MLF
Black Wear Resistant Low Friction Medium Duty Low Friction
AS DUV HP™ P PS® WHP WLF WSM WX
Anti-Static Plain Acetal Ultraviolet Resistant High Performance Chemical Resistant Platinum Series® White High Performance White Low Friction White Cut Resistant Green Abrasion Resistant Polyamide
Temperature Fahrenheit max min min dry wet Standard Materials Stainless Steel -40 180 NR -40 Stainless Steel -40 180 150 -40 Zinc Plated Steel -40 180 150 -40 Made-to-Order Materials Stainless Steel 0 180 NR -18 Stainless Steel 0 180 150 -18 Stainless Steel -40 180 150 -40 Stainless Steel 0 180 140 -18 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 220 NR -40 Standard Pin Material
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
Multiflex
Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 5678682, EP0700843
TT - 1701 - 2
Celsius max dry wet
Chain Strength lbs
N
FDA Approval
82 82 82
NR 66 66
720 600 600
3,203 2,669 2,669
No Yes No
82 82 82 82 82 82 82 82 104
NR 66 66 60 66 66 66 66 NR
360 600 600 480 600 600 600 600 600
1,601 2,669 2,669 2,135 2,669 2,669 2,669 2,669 2,669
No No Yes Yes Yes Yes Yes Yes No
Additional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. HC1731 is BWR 1701TAB with special hardened carbon steel pins. Chain strength is listed at room temperature.NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
Chain Drawing DIRECTION OF TRAVEL
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Chain Width Min. Side-flex Radius Approximate Weight desc in mm in mm lbs/ft kg/m N/A 2.09 53.1 5.75 146.1 1.20 1.79
Chain Pitch 1.97 in (50.0 mm)
Chain Width
Chain Height 0.98 in (24.9 mm)
Photo shows 1701 TAB TableTop® Chain with Armor-Clad (AC) top surface molded in Low Friction (LF) material.
Chain Top to TAB Top 0.75 in (19.1 mm)
Height Over Centerline 0.50 in (12.7 mm)
Min. Side-flex Radius
Guide Clearance Curve 2.25 in (57.2 mm)
Guide Clearance Straight 2.34 in (59.5 mm)
TAB Width 2.63 in (66.8 mm)
Thickness 0.20 in (5.1 mm)
Rexnord® 1701 TAB TableTop® Chain with Armor-Clad Surface
1701 TAB AC
Pin Diameter 0.32 in (8.1 mm)
Available Materials Prefix
LF
Chain Material
Low Friction
Temperature Fahrenheit max min min dry wet Standard Materials Stainless Steel -40 180 150 -40 Standard Pin Material
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177. Rexnord, TableTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved.
82
66
Chain Strength lbs
N
600
2,669
FDA Approval
Yes
Additional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. Armor-clad cap material is stainless steel. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
TT - 1701- 3
Multiflex
Rexnord® 1701 Series TableTop® Chain Product Portfolio
Celsius max dry wet
N1700 Thermoplastic Sprocket
Rexnord® 1701 Series TableTop® Chain Compatible Sprockets
actual 8 10 12
effect 8 10 12
Pitch Diameter in mm 5.143 130.63 6.369 161.77 7.604 193.14
Outside Diameter in 5.25 6.50 7.72
mm 133.4 165.1 196.1
min 3/4 3/4 3/4
Length thru Bore 1.88 in (47.8 mm)
Bore Diameter Pitch Diameter Outside Diameter
Bore Diameter Pitch Diameter Outside Diameter
Length thru Bore 1.56 in (39.6 mm)
Number Of Teeth
2.00 in (50.8 mm) Face Width
0.43 in (10.9 mm) Face Width
1700 Semi-Steel Sprocket Information Bore Diameter (Shaft-Ready) Round Square in mm in mm max min max min max min max 1 9/16 20 40 1 3/4 20 45 1 3/4 20 45 -
Length thru Bore 2.14 in (54.4 mm)
Bore Diameter (Round) in min 3/4 3/4 3/4
mm max 1 3/4 1 3/4 1 3/4
min 20 20 20
max 45 45 45
Outside Diameter
0.44 in (11.2 mm) Face Width
1700 Idler Wheel
Bore Diameter
1700 Semi-Steel Sprocket
Approximate Weight lbs 3.77 5.55 7.29
kg 1.71 2.52 3.31
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
Number Of Teeth actual 10 12
effect 10 12
Pitch Diameter in mm 6.369 161.77 7.604 193.14
N1700 Thermoplastic Sprocket Information Bore Diameter (Shaft-Ready)
Outside Diameter in 6.50 7.76
mm 165.1 197.1
Round in -
Bore Diameter (Idler)
Hex mm -
in 2 2
mm -
in -
mm -
Approximate Weight lbs 0.70 0.90
kg 0.32 0.41
1700 Idler Wheel Imperial Information Equivalent Tooth Size 8
Outside Diameter in 5.14
mm 130.6
Imperial Bore Diameter (Idler) in 5/8 in
Approximate Weight lbs 1.25
kg 0.57
Idler wheels are designed to spin freely on the shaft.
1700 Idler Wheel Metric Information Equivalent Tooth Size 8
Outside Diameter in 5.14
mm 130.6
Metric Bore Diameter (Idler) mm 16 mm
Approximate Weight lbs 1.25
kg 0.57
Idler wheels are designed to spin freely on the shaft.
TT - 1701 - 4
Rexnord® 1701 Series TableTop® Chain Product Portfolio
Corner Track (Two Piece) Outside Track
Width Outside Track Radius Nominal Corner Radius
Bevel Angle 8.0°
Thickness View A - A Bevel Design
Inside Track A A
Track Angle 90.0°
Inside Track Radius
Width
Thickness
View A - A TAB Design
Corner track kit supplied as one 90° inside and one 90° outside track, which can be used as either carry or return.
Corner Track Kit Number
Accomodates Top Nominal Corner Plate Width Radius
Inside Track Radius
mm
in
mm
in
mm
N24B5
All
All
24.0
610
22.9
582
N24R5 U24R5
All All
All All
24.0 24.0
610 610
22.9 22.9
582 582
in
mm Bevel Design 25.1 638 TAB Design 25.1 638 25.1 638
Thickness
Width
Material
Color
Approximate Corner Track Kit Weight lbs kg
in
mm
in
mm
0.62
15.7
1.50
38.1
Nylatron®
Black
2.89
1.31
0.62 0.62
15.7 15.7
1.50 1.50
38.1 38.1
Nylatron® UHMWPE
Black White
2.89 2.89
1.31 1.31
Nylatron® is a registered trademark of Quadrant Engineering Plastics Products.
Corner Track) (Four Piece)
Width
Outside Track Outside Track Radius Gap Between Each Track 0.1 in (3.0 mm)
Bevel Angle 8.0°
Thickness View A - A Bevel Design
Nominal Corner Radius A A
Track Angle 45.0° (Each Track)
Width Inside Track Radius Inside Track
Thickness View A - A TAB Design
Corner track kit supplied as two 45° inside and two 45° outside track, which can be used as either carry or return.
Corner Track Kit Number
Accomodates Top Nominal Corner Plate Width Radius
Inside Track Radius
in
mm
in
mm
in
mm
N30B5
All
All
30.0
762
28.9
734
N30R5
All
All
30.0
762
28.9
734
Outside Track Radius in
Thickness
mm in Bevel Design 31.1 790 0.62 TAB Design 31.1 790 0.62
Material
Color
Approximate Corner Track Kit Weight lbs kg
38.1
Nylatron®
Black
3.61
1.64
38.1
Nylatron®
Black
3.61
1.64
Width
mm
in
mm
15.7
1.50
15.7
1.50
Nylatron is a registered trademark of Quadrant Engineering Plastics Products. ®
Rexnord® 1701 Series TableTop® Chain Product Portfolio
TT - 1701- 5
Rexnord® 1701 Series TableTop® Chain Accessories
in
Outside Track Radius
CL Corner Disc
CL Chain
Center of Disc to Chain Center
Rim Thickness 0.78 in (19.8 mm)
Corner Disc (Flat Top)
Outside Radius
Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm) Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Top of Corner Disc to Top of Mounting Plate 2.41 in (61.2 mm)
Bottom of Chain to Top of Mounting Plate 1.47 in (37.3 mm)
Corner Disc Number Mounting Plate 3/4 - 16 UNC - 2A Threaded Shaft
1701 FT-10 1701 FT-18
Center of Disc to Outside Radius Chain Center in mm in mm 5.90 149.9 4.86 123.4 10.00 254.0 8.94 227.1
Approximate Weight lbs kg 4.20 1.91 7.00 3.18
Corner Disc Material: Aluminum.
For 1701 (bevel) chain only.
Rim Thickness 0.62 in (15.7 mm)
Outside Radius
CL Corner Disc
CL Chain
Center of Disc to Outside Radius Chain Center in mm in mm 1701TAB FT-10 5.90 149.9 4.86 123.4 1701TAB FT-18 10.00 254.0 8.94 227.1
Mounting Plate 3/4 - 16 UNC - 2A Threaded Shaft
Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Top of Corner Disc to Top of Mounting Plate 2.41 in (61.2 mm)
Corner Disc Number
Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm)
Bottom of Chain to Top of Mounting Plate 1.47 in (37.3 mm)
Center of Disc to Chain Center
Approximate Weight lbs kg 4.20 1.91 7.00 3.18
Corner Disc Material: Aluminum.
For 1701 TAB chain only.
CL Chain
Outside Radius
Hub Diameter 2.62 in (66.5 mm)
Top of Hub to Bottom of Rim 2.06 in (52.3 mm)
Center of Disc to Chain Center
CL Corner Disc
Corner Disc (Raised Hub)
TT - 1701 - 6
Top of Mounting Plate to Top of Rib 1.12 in (28.4 mm)
Mounting Plate 3/4 - 16 UNC - 2A Threaded Shaft
Rib Bottom to Bottom of Shaft 1.59 in (40.4 mm) Rib Bottom to Top of Mounting Plate 0.34 in (8.6 mm)
Corner Disc Number Bottom of Chain to Top of Mounting Plate 0.17 in (4.3 mm)
Rexnord® 1701 Series TableTop® Chain Accessories
Corner Disc (Flat Top)
1701 RH-10
Center of Disc to Outside Radius Chain Center in mm in mm 5.90 149.9 4.86 123.4
Approximate Weight lbs kg 4.20 1.91
Corner Disc Material: Aluminum.
For 1701 (bevel) chain only.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
3/4 - 16 UNC - 2A Threaded Shaft
Center of Disc to Outside Radius Chain Center in mm in mm 1701TAB RH-10 5.90 149.9 4.86 123.4 Corner Disc Number
Top of Mounting Plate to Top of Rib 1.12 in (28.4 mm)
Mounting Plate
Hub Diameter 2.62 in (66.5 mm)
Top of Hub to Bottom of Rim 2.06 in (52.3 mm)
Rim Thickness 0.69 in (17.5 mm)
Outside Radius
Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm)
Bottom of Chain to Top of Mounting Plate 0.17 in (4.3 mm)
CL Chain
Center of Disc to Chain Center
CL Corner Disc
Corner Disc (Raised Hub)
Approximate Weight lbs kg 4.20 1.91
Corner Disc Material: Aluminum.
For 1701 TAB chain only.
Extended Pivot
Pivot Height 0.98 in (24.9 mm)
For 1701 and 1701 TAB chains only. Do not use with AC 1701 TAB chain.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
TT - 1701- 7
Rexnord® 1701 Series TableTop® Chain Accessories
Please indicate if you require an extended pivot every pitch, every second pitch, etc. when ordering.
Chain Information Chain Width Min. Side-flex Radius Approximate Weight desc in mm in mm lbs/ft kg/m N/A 2.09 53.1 5.75 146.1 0.95 1.42
Chain Pitch 1.97 in (50.0 mm)
Chain Width
Chain Height 0.98 in (24.9 mm)
Min. Back-flex Radius 1.50 in (38.1 mm)
Photo shows 1701 TableTop® Chain molded in Low Friction (LF) material.
Height Over Centerline 0.50 in (12.7 mm)
Min. Side-flex Radius
Guide Clearance (Curve) 2.34 in (59.4 mm)
Guide Clearance (Straight) 2.19 in (55.6 mm)
Thickness 0.18 in (4.5 mm)
Rexnord® 1701 TableTop® Chain
1701
Pin Diameter 0.32 in (8.1 mm)
Available Materials Prefix
Chain Material
LF
Low Friction
BWR HP™ PS® WLF WX
Black Wear Resistant High Performance Platinum Series® White Low Friction Green Abrasion Resistant Polyamide
Temperature Fahrenheit max min min dry wet Standard Materials Stainless Steel -40 180 150 -40 Made-to-Order Materials Stainless Steel -40 180 NR -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 220 NR -40 Standard Pin Material
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. All rights reserved.
Chain Strength lbs
N
FDA Approval
82
66
600
2,669
Yes
82 82 82 82 104
NR 66 66 66 NR
720 600 600 600 600
3,203 2,669 2,669 2,669 2,669
No Yes Yes Yes No
Additional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. Armor-clad cap material is stainless steel. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
TT - 1701- 1
Multiflex
U.S. Patents: 5678682, EP0700843
Celsius max dry wet
Chain Drawing Thickness 0.18 in (4.5 mm)
Chain Width
Guide Clearance Straight 2.34 in (59.5 mm)
TAB Width 2.63 in (66.8 mm)
DIRECTION OF TRAVEL
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Chain Width Min. Side-flex Radius Approximate Weight desc in mm in mm lbs/ft kg/m N/A 2.09 53.1 5.75 146.1 1.00 1.49
Chain Pitch 1.97 in (50.0 mm)
Chain Top to TAB Top 0.75 in (19.1 mm)
Height Over Centerline 0.50 in (12.7 mm) Chain Height 0.98 in (24.9 mm)
Min. Side-flex Radius
Photo shows 1701 TAB TableTop® Chain molded in Low Friction (LF) material.
Guide Clearance Curve 2.25 in (57.2 mm)
Rexnord® 1701 TAB TableTop® Chain
1701 TAB
Pin Diameter 0.32 in (8.1 mm)
Available Materials Chain Material
Prefix
BWR LF MLF
Black Wear Resistant Low Friction Medium Duty Low Friction
AS DUV HP™ P PS® WHP WLF WSM WX
Anti-Static Plain Acetal Ultraviolet Resistant High Performance Chemical Resistant Platinum Series® White High Performance White Low Friction White Cut Resistant Green Abrasion Resistant Polyamide
Temperature Fahrenheit max min min dry wet Standard Materials Stainless Steel -40 180 NR -40 Stainless Steel -40 180 150 -40 Zinc Plated Steel -40 180 150 -40 Made-to-Order Materials Stainless Steel 0 180 NR -18 Stainless Steel 0 180 150 -18 Stainless Steel -40 180 150 -40 Stainless Steel 0 180 140 -18 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 180 150 -40 Stainless Steel -40 220 NR -40 Standard Pin Material
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
Multiflex
Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 5678682, EP0700843
TT - 1701 - 2
Celsius max dry wet
Chain Strength lbs
N
FDA Approval
82 82 82
NR 66 66
720 600 600
3,203 2,669 2,669
No Yes No
82 82 82 82 82 82 82 82 104
NR 66 66 60 66 66 66 66 NR
360 600 600 480 600 600 600 600 600
1,601 2,669 2,669 2,135 2,669 2,669 2,669 2,669 2,669
No No Yes Yes Yes Yes Yes Yes No
Additional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. HC1731 is BWR 1701TAB with special hardened carbon steel pins. Chain strength is listed at room temperature.NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
Chain Drawing DIRECTION OF TRAVEL
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Chain Width Min. Side-flex Radius Approximate Weight desc in mm in mm lbs/ft kg/m N/A 2.09 53.1 5.75 146.1 1.20 1.79
Chain Pitch 1.97 in (50.0 mm)
Chain Width
Chain Height 0.98 in (24.9 mm)
Photo shows 1701 TAB TableTop® Chain with Armor-Clad (AC) top surface molded in Low Friction (LF) material.
Chain Top to TAB Top 0.75 in (19.1 mm)
Height Over Centerline 0.50 in (12.7 mm)
Min. Side-flex Radius
Guide Clearance Curve 2.25 in (57.2 mm)
Guide Clearance Straight 2.34 in (59.5 mm)
TAB Width 2.63 in (66.8 mm)
Thickness 0.20 in (5.1 mm)
Rexnord® 1701 TAB TableTop® Chain with Armor-Clad Surface
1701 TAB AC
Pin Diameter 0.32 in (8.1 mm)
Available Materials Prefix
LF
Chain Material
Low Friction
Temperature Fahrenheit max min min dry wet Standard Materials Stainless Steel -40 180 150 -40 Standard Pin Material
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177. Rexnord, TableTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved.
82
66
Chain Strength lbs
N
600
2,669
FDA Approval
Yes
Additional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. Armor-clad cap material is stainless steel. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
TT - 1701- 3
Multiflex
Rexnord® 1701 Series TableTop® Chain Product Portfolio
Celsius max dry wet
N1700 Thermoplastic Sprocket
Rexnord® 1701 Series TableTop® Chain Compatible Sprockets
actual 8 10 12
effect 8 10 12
Pitch Diameter in mm 5.143 130.63 6.369 161.77 7.604 193.14
Outside Diameter in 5.25 6.50 7.72
mm 133.4 165.1 196.1
min 3/4 3/4 3/4
Length thru Bore 1.88 in (47.8 mm)
Bore Diameter Pitch Diameter Outside Diameter
Bore Diameter Pitch Diameter Outside Diameter
Length thru Bore 1.56 in (39.6 mm)
Number Of Teeth
2.00 in (50.8 mm) Face Width
0.43 in (10.9 mm) Face Width
1700 Semi-Steel Sprocket Information Bore Diameter (Shaft-Ready) Round Square in mm in mm max min max min max min max 1 9/16 20 40 1 3/4 20 45 1 3/4 20 45 -
Length thru Bore 2.14 in (54.4 mm)
Bore Diameter (Round) in min 3/4 3/4 3/4
mm max 1 3/4 1 3/4 1 3/4
min 20 20 20
max 45 45 45
Outside Diameter
0.44 in (11.2 mm) Face Width
1700 Idler Wheel
Bore Diameter
1700 Semi-Steel Sprocket
Approximate Weight lbs 3.77 5.55 7.29
kg 1.71 2.52 3.31
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
Number Of Teeth actual 10 12
effect 10 12
Pitch Diameter in mm 6.369 161.77 7.604 193.14
N1700 Thermoplastic Sprocket Information Bore Diameter (Shaft-Ready)
Outside Diameter in 6.50 7.76
mm 165.1 197.1
Round in -
Bore Diameter (Idler)
Hex mm -
in 2 2
mm -
in -
mm -
Approximate Weight lbs 0.70 0.90
kg 0.32 0.41
1700 Idler Wheel Imperial Information Equivalent Tooth Size 8
Outside Diameter in 5.14
mm 130.6
Imperial Bore Diameter (Idler) in 5/8 in
Approximate Weight lbs 1.25
kg 0.57
Idler wheels are designed to spin freely on the shaft.
1700 Idler Wheel Metric Information Equivalent Tooth Size 8
Outside Diameter in 5.14
mm 130.6
Metric Bore Diameter (Idler) mm 16 mm
Approximate Weight lbs 1.25
kg 0.57
Idler wheels are designed to spin freely on the shaft.
TT - 1701 - 4
Rexnord® 1701 Series TableTop® Chain Product Portfolio
Corner Track (Two Piece) Outside Track
Width Outside Track Radius Nominal Corner Radius
Bevel Angle 8.0°
Thickness View A - A Bevel Design
Inside Track A A
Track Angle 90.0°
Inside Track Radius
Width
Thickness
View A - A TAB Design
Corner track kit supplied as one 90° inside and one 90° outside track, which can be used as either carry or return.
Corner Track Kit Number
Accomodates Top Nominal Corner Plate Width Radius
Inside Track Radius
mm
in
mm
in
mm
N24B5
All
All
24.0
610
22.9
582
N24R5 U24R5
All All
All All
24.0 24.0
610 610
22.9 22.9
582 582
in
mm Bevel Design 25.1 638 TAB Design 25.1 638 25.1 638
Thickness
Width
Material
Color
Approximate Corner Track Kit Weight lbs kg
in
mm
in
mm
0.62
15.7
1.50
38.1
Nylatron®
Black
2.89
1.31
0.62 0.62
15.7 15.7
1.50 1.50
38.1 38.1
Nylatron® UHMWPE
Black White
2.89 2.89
1.31 1.31
Nylatron® is a registered trademark of Quadrant Engineering Plastics Products.
Corner Track) (Four Piece)
Width
Outside Track Outside Track Radius Gap Between Each Track 0.1 in (3.0 mm)
Bevel Angle 8.0°
Thickness View A - A Bevel Design
Nominal Corner Radius A A
Track Angle 45.0° (Each Track)
Width Inside Track Radius Inside Track
Thickness View A - A TAB Design
Corner track kit supplied as two 45° inside and two 45° outside track, which can be used as either carry or return.
Corner Track Kit Number
Accomodates Top Nominal Corner Plate Width Radius
Inside Track Radius
in
mm
in
mm
in
mm
N30B5
All
All
30.0
762
28.9
734
N30R5
All
All
30.0
762
28.9
734
Outside Track Radius in
Thickness
mm in Bevel Design 31.1 790 0.62 TAB Design 31.1 790 0.62
Material
Color
Approximate Corner Track Kit Weight lbs kg
38.1
Nylatron®
Black
3.61
1.64
38.1
Nylatron®
Black
3.61
1.64
Width
mm
in
mm
15.7
1.50
15.7
1.50
Nylatron is a registered trademark of Quadrant Engineering Plastics Products. ®
Rexnord® 1701 Series TableTop® Chain Product Portfolio
TT - 1701- 5
Rexnord® 1701 Series TableTop® Chain Accessories
in
Outside Track Radius
CL Corner Disc
CL Chain
Center of Disc to Chain Center
Rim Thickness 0.78 in (19.8 mm)
Corner Disc (Flat Top)
Outside Radius
Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm) Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Top of Corner Disc to Top of Mounting Plate 2.41 in (61.2 mm)
Bottom of Chain to Top of Mounting Plate 1.47 in (37.3 mm)
Corner Disc Number Mounting Plate 3/4 - 16 UNC - 2A Threaded Shaft
1701 FT-10 1701 FT-18
Center of Disc to Outside Radius Chain Center in mm in mm 5.90 149.9 4.86 123.4 10.00 254.0 8.94 227.1
Approximate Weight lbs kg 4.20 1.91 7.00 3.18
Corner Disc Material: Aluminum.
For 1701 (bevel) chain only.
Rim Thickness 0.62 in (15.7 mm)
Outside Radius
CL Corner Disc
CL Chain
Center of Disc to Outside Radius Chain Center in mm in mm 1701TAB FT-10 5.90 149.9 4.86 123.4 1701TAB FT-18 10.00 254.0 8.94 227.1
Mounting Plate 3/4 - 16 UNC - 2A Threaded Shaft
Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Top of Corner Disc to Top of Mounting Plate 2.41 in (61.2 mm)
Corner Disc Number
Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm)
Bottom of Chain to Top of Mounting Plate 1.47 in (37.3 mm)
Center of Disc to Chain Center
Approximate Weight lbs kg 4.20 1.91 7.00 3.18
Corner Disc Material: Aluminum.
For 1701 TAB chain only.
CL Chain
Outside Radius
Hub Diameter 2.62 in (66.5 mm)
Top of Hub to Bottom of Rim 2.06 in (52.3 mm)
Center of Disc to Chain Center
CL Corner Disc
Corner Disc (Raised Hub)
TT - 1701 - 6
Top of Mounting Plate to Top of Rib 1.12 in (28.4 mm)
Mounting Plate 3/4 - 16 UNC - 2A Threaded Shaft
Rib Bottom to Bottom of Shaft 1.59 in (40.4 mm) Rib Bottom to Top of Mounting Plate 0.34 in (8.6 mm)
Corner Disc Number Bottom of Chain to Top of Mounting Plate 0.17 in (4.3 mm)
Rexnord® 1701 Series TableTop® Chain Accessories
Corner Disc (Flat Top)
1701 RH-10
Center of Disc to Outside Radius Chain Center in mm in mm 5.90 149.9 4.86 123.4
Approximate Weight lbs kg 4.20 1.91
Corner Disc Material: Aluminum.
For 1701 (bevel) chain only.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
3/4 - 16 UNC - 2A Threaded Shaft
Center of Disc to Outside Radius Chain Center in mm in mm 1701TAB RH-10 5.90 149.9 4.86 123.4 Corner Disc Number
Top of Mounting Plate to Top of Rib 1.12 in (28.4 mm)
Mounting Plate
Hub Diameter 2.62 in (66.5 mm)
Top of Hub to Bottom of Rim 2.06 in (52.3 mm)
Rim Thickness 0.69 in (17.5 mm)
Outside Radius
Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm)
Bottom of Chain to Top of Mounting Plate 0.17 in (4.3 mm)
CL Chain
Center of Disc to Chain Center
CL Corner Disc
Corner Disc (Raised Hub)
Approximate Weight lbs kg 4.20 1.91
Corner Disc Material: Aluminum.
For 1701 TAB chain only.
Extended Pivot
Pivot Height 0.98 in (24.9 mm)
For 1701 and 1701 TAB chains only. Do not use with AC 1701 TAB chain.
Rexnord® 1701 Series TableTop® Chain Product Portfolio
TT - 1701- 7
Rexnord® 1701 Series TableTop® Chain Accessories
Please indicate if you require an extended pivot every pitch, every second pitch, etc. when ordering.
