RavennaTM Highlighter EL170 - Kim Lighting
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Fixture Options:
Fixture Catalog number:
Mounting Options:
Approvals:
Ordered Separately from Fixture See page 2
Fixture and Finish
Date: Page: 1 of 5
Ordered Separately from Fixture See pages 3-5
Specifications
Lamp Housing: Die-cast aluminum with die-cast cover, stainless steel fasteners. Stainless steel set screw lock for aiming pivot. Aiming: Aimable 358° vertically, horizontal aiming controlled by installation on mounting device. Ravenna Yoke: Cast aluminum, stainless steel fasteners and K" NPSM brass nipple mount. Lens: Tempered glass, B" nominal thickness. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: 120 volt to 12 volt, 20 to 50 watt electronic stepdown transformer, enclosed and gasketed in yoke base. Wiring: No. 18AWM rated 105°C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations.
5M"
Ordering Information Fixture Lamp Finish l EL170BL 20W-50W Black MR16 Bipin Halogen l EL170DB
l EL170GR
20W-50W MR16 Bipin Halogen
Dark Bronze
20W-50W MR16 Bipin Halogen
Verde Green
3D"
(134.9 mm)
(92.0 mm)
23L"
(603.3 mm)
Electronic Stepdown Transformer (in base) K" NPSM
U.s. patent D407,842 KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 2 of 5
Fixture Options
Ordered Separately from Fixture Lens Accessories Cat. No. (See right) l No Option
HL - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No. l HL Hex Cell Louver PL - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens. Cannot be used in combination with HL louver. Cat. No. l PL Prismatic Lens SL - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens. Cannot be used in combination with HL louver. Cat. No. l SL Spread Lens
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
PL10
SL10
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 3 of 5
Mounting Options
Ordered Separately from Fixture= Landscape Light Post by Engineered Products Co. Cat. No. l EP17 l No Option
Architectural Junction Box Cat. No. Finish l JB1/BL Black l JB1/DB Dark Bronze l JB1/GR Verde Green l No Option
PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length x = required depth of conduit locallisted codesfixture NOTE: EP17 should be used withper a UL and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local codes.
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures. Application Notes • Elevates Accent Lights above ground cover to prevent foliage from blocking the light. • Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: Junction box must be installed high enough to avoid contact with soil or standing water.”
3J" DIA. K" NPT Fixture Mount 2J"
x
(57.2 mm)
(82.6 mm)
1"
(25.4 mm)
17K" 17K"
(444.5 mm)
3K" 3K"
(88.9 mm)
5" 5"
(127.0 mm)
Rigid Conduit (by others)
3" DIA. (76 mm)
K" NPSM Fixture Mount
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
4L"
(121 mm)
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 4 of 5
Mounting Options
Ordered Separately from FixtureH Brass In-grade Architectural Junction Box Cat. No. l JBR-2 l JBR-3 l JBR-21 l JBR-24 l No Option
Brass In-grade Staked Junction Box Cat. No. l JBR30 l No Option
Brass In-grade Staked Junction Box With Cord Cat. No. l JBR32 l No Option
Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.Í JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes. NOTE: May also be used to hard mount low voltage fixtures. JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long stakes with 9' cord. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
3L" DIA. (95.3 mm)
K" NPSM Fixture Mount
K" (12.7 mm)
3"
(76.2 mm)
3L" DIA.
K" NPSM Fixture Mount
(95.3 mm)
3K"
(88.9 mm)
19C"
(492.1 mm)
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
18D"
(473.1 mm)
1"
(25.4 mm)
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 5 of 5
Mounting Options
Ordered Separately from Fixture Stanchion Mount Cat. No. Finish l SM18/BL Black l SM18/DB Dark Bronze l SM18/GR Verde Green l No Option
3" O.D. by .188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
K" NPSM Fixture Mount 6" Min. (152.4 mm) 12" Max. (304.8 mm)
Optional Concrete (by others)
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
3" DIA.
(76.2 mm)
18"
(457.2 mm)
Rigid Conduit (by others)
5622411101
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Fixture Options:
Fixture Catalog number:
Mounting Options:
Approvals:
Ordered Separately from Fixture See page 2
Fixture and Finish
Date: Page: 1 of 5
Ordered Separately from Fixture See pages 3-5
Specifications
Lamp Housing: Die-cast aluminum with die-cast cover, stainless steel fasteners. Stainless steel set screw lock for aiming pivot. Aiming: Aimable 358° vertically, horizontal aiming controlled by installation on mounting device. Ravenna Yoke: Cast aluminum, stainless steel fasteners and K" NPSM brass nipple mount. Lens: Tempered glass, B" nominal thickness. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: 120 volt to 12 volt, 20 to 50 watt electronic stepdown transformer, enclosed and gasketed in yoke base. Wiring: No. 18AWM rated 105°C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations.
5M"
Ordering Information Fixture Lamp Finish l EL170BL 20W-50W Black MR16 Bipin Halogen l EL170DB
l EL170GR
20W-50W MR16 Bipin Halogen
Dark Bronze
20W-50W MR16 Bipin Halogen
Verde Green
3D"
(134.9 mm)
(92.0 mm)
23L"
(603.3 mm)
Electronic Stepdown Transformer (in base) K" NPSM
U.s. patent D407,842 KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 2 of 5
Fixture Options
Ordered Separately from Fixture Lens Accessories Cat. No. (See right) l No Option
HL - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No. l HL Hex Cell Louver PL - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens. Cannot be used in combination with HL louver. Cat. No. l PL Prismatic Lens SL - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens. Cannot be used in combination with HL louver. Cat. No. l SL Spread Lens
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
PL10
SL10
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 3 of 5
Mounting Options
Ordered Separately from Fixture= Landscape Light Post by Engineered Products Co. Cat. No. l EP17 l No Option
Architectural Junction Box Cat. No. Finish l JB1/BL Black l JB1/DB Dark Bronze l JB1/GR Verde Green l No Option
PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length x = required depth of conduit locallisted codesfixture NOTE: EP17 should be used withper a UL and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local codes.
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures. Application Notes • Elevates Accent Lights above ground cover to prevent foliage from blocking the light. • Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: Junction box must be installed high enough to avoid contact with soil or standing water.”
3J" DIA. K" NPT Fixture Mount 2J"
x
(57.2 mm)
(82.6 mm)
1"
(25.4 mm)
17K" 17K"
(444.5 mm)
3K" 3K"
(88.9 mm)
5" 5"
(127.0 mm)
Rigid Conduit (by others)
3" DIA. (76 mm)
K" NPSM Fixture Mount
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
4L"
(121 mm)
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 4 of 5
Mounting Options
Ordered Separately from FixtureH Brass In-grade Architectural Junction Box Cat. No. l JBR-2 l JBR-3 l JBR-21 l JBR-24 l No Option
Brass In-grade Staked Junction Box Cat. No. l JBR30 l No Option
Brass In-grade Staked Junction Box With Cord Cat. No. l JBR32 l No Option
Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.Í JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes. NOTE: May also be used to hard mount low voltage fixtures. JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long stakes with 9' cord. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
3L" DIA. (95.3 mm)
K" NPSM Fixture Mount
K" (12.7 mm)
3"
(76.2 mm)
3L" DIA.
K" NPSM Fixture Mount
(95.3 mm)
3K"
(88.9 mm)
19C"
(492.1 mm)
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
18D"
(473.1 mm)
1"
(25.4 mm)
5622411101
Ravenna Highlighter EL170 TM
120 Volt Die-Cast Aluminum, MR16 Halogen revision 2/25/14 • el170el171_spec.pdf
Type: Job:
Page: 5 of 5
Mounting Options
Ordered Separately from Fixture Stanchion Mount Cat. No. Finish l SM18/BL Black l SM18/DB Dark Bronze l SM18/GR Verde Green l No Option
3" O.D. by .188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
K" NPSM Fixture Mount 6" Min. (152.4 mm) 12" Max. (304.8 mm)
Optional Concrete (by others)
© 2014 KIM LIGHTING • 16555 East Gale Avenue, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
3" DIA.
(76.2 mm)
18"
(457.2 mm)
Rigid Conduit (by others)
5622411101
