rc1220 diesel - Global Machinery Sales
RC1220 DIESEL
) 1300 072 926
www.globalmachinerysales.com.au VIC 24-28 Williams Road Dandenong Sth. 3175 F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148 F (02) 8678 2478 E [email protected]
RC1220 DIESEL The RC1220 delivers power and productivity the professional user demands. This high-performance 12-inch (30.5cm) capacity chipper is powered by Kubota diesel engines in 67hp or 99hp. Standard features include RAYCO’s Versa-Feed infeed control to optimise chipping performance and X-Charge discharge system which injects high velocity air to maximise discharge velocity. A large, 12-inch (30.5cm) high by 20-inch (50.8cm) wide, infeed opening is 3-inches (7.6cm) wider than most competitors, allowing the chipper to handle forked material easier. The feed wheel measures 20-inches (50.8cm) in diameter, making it easier to climb over most logs without need to manually raise the feed wheel. Infeed power is supplied by a planetary feed wheel motor which achieves tremendous torque for pulling in stubborn material and requires very little maintenance. The RC1220 utilises Rayco’s exclusive Touch and Go downpressure system. Touch and Go maintains continuous downpressure for 30 seconds with one pull of the downpressure lever, eliminating the need for an operator to hold the lever continuously to apply downpressure. All these features packed on a rugged 2(5cm)x6(5cm)-inch box tube frame make the RC1220 chipper a high-performance chipper built for your challenging job conditions.
Specifications RC1220 Diesel Weight Length Height Width Engine Fuel Tank Chipping Capacity In-feed opening Intake Rate Discharge Height Rotation Feed Wheel Diameter
Available with a 360o hydraulic chute and hydraulic winch.
2,549kg 406.4cm (Feed Table Up) 267.7cm 198.8cm 66.8 or 99.2hp Kubota 109.7L 30.5cm 30.5cm x 50.8cm 30.5m/min 253.37cm 360o 20” (50.8cm)
Features Powerful 100hp Kubota diesel engine Planetary Feed Wheel Drive Motor Hydraulic Lift and Crush Touch and Go Down Pressure System X-Charge Discharge System Versa-Feed Automatic Feed Control 360o Hydraulic chute Hydraulic winch
The RC1220 boasts an impressive 30.5 x 50.8cm in-feed opening.
) 1300 072 926
www.globalmachinerysales.com.au VIC 24-28 Williams Road Dandenong Sth. 3175 F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148 F (02) 8678 2478 E [email protected]
) 1300 072 926
www.globalmachinerysales.com.au VIC 24-28 Williams Road Dandenong Sth. 3175 F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148 F (02) 8678 2478 E [email protected]
RC1220 DIESEL The RC1220 delivers power and productivity the professional user demands. This high-performance 12-inch (30.5cm) capacity chipper is powered by Kubota diesel engines in 67hp or 99hp. Standard features include RAYCO’s Versa-Feed infeed control to optimise chipping performance and X-Charge discharge system which injects high velocity air to maximise discharge velocity. A large, 12-inch (30.5cm) high by 20-inch (50.8cm) wide, infeed opening is 3-inches (7.6cm) wider than most competitors, allowing the chipper to handle forked material easier. The feed wheel measures 20-inches (50.8cm) in diameter, making it easier to climb over most logs without need to manually raise the feed wheel. Infeed power is supplied by a planetary feed wheel motor which achieves tremendous torque for pulling in stubborn material and requires very little maintenance. The RC1220 utilises Rayco’s exclusive Touch and Go downpressure system. Touch and Go maintains continuous downpressure for 30 seconds with one pull of the downpressure lever, eliminating the need for an operator to hold the lever continuously to apply downpressure. All these features packed on a rugged 2(5cm)x6(5cm)-inch box tube frame make the RC1220 chipper a high-performance chipper built for your challenging job conditions.
Specifications RC1220 Diesel Weight Length Height Width Engine Fuel Tank Chipping Capacity In-feed opening Intake Rate Discharge Height Rotation Feed Wheel Diameter
Available with a 360o hydraulic chute and hydraulic winch.
2,549kg 406.4cm (Feed Table Up) 267.7cm 198.8cm 66.8 or 99.2hp Kubota 109.7L 30.5cm 30.5cm x 50.8cm 30.5m/min 253.37cm 360o 20” (50.8cm)
Features Powerful 100hp Kubota diesel engine Planetary Feed Wheel Drive Motor Hydraulic Lift and Crush Touch and Go Down Pressure System X-Charge Discharge System Versa-Feed Automatic Feed Control 360o Hydraulic chute Hydraulic winch
The RC1220 boasts an impressive 30.5 x 50.8cm in-feed opening.
) 1300 072 926
www.globalmachinerysales.com.au VIC 24-28 Williams Road Dandenong Sth. 3175 F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148 F (02) 8678 2478 E [email protected]
