rebar bending and straightening machine model lr rbs 32
REBAR BENDING AND STRAIGHTENING MACHINE MODEL LR RBS 32
The LR RBS 32 is designed to be used as a portable on-site bar bender, which is capable of bending in-situ bar up to a diameter of 32mm High Tensile Steel 85kg/mm2. Suitable for diameters 20, 25 and 32mm High Tensile Steel. Will also straighten bar, which has been bent to less than 30 degrees. Specifications: Maximum Capacity:
32mm High Tensile Steel 85kg/mm2 Suitable to Bend Diameters: 20, 25 and 32mm Maximum Bending Angle: 90 degrees Minimum Bend: 356mm ** Minimum Length of Bar Required to Bend: 680mm Dimensions and Weight: 686 x 483 x 152 mm 36 kg ** Minimum Bend measured from bottom of the machine to the top of the bend angle P. F. La Roche & Co. Limited
Power Supply: Hydraulic Power Pack Dimensions and Weight:
110v or 220v 50hz single phase 1.5hp 1.2kw, 32amp plug 372 x 261x 464 mm 34 kg
Pictures show the machine bending 32mm High Tensile Steel 85kg/mm2 to just over 90 degrees
P. F. La Roche & Co. Limited
The LR RBS 32 is designed to be used as a portable on-site bar bender, which is capable of bending in-situ bar up to a diameter of 32mm High Tensile Steel 85kg/mm2. Suitable for diameters 20, 25 and 32mm High Tensile Steel. Will also straighten bar, which has been bent to less than 30 degrees. Specifications: Maximum Capacity:
32mm High Tensile Steel 85kg/mm2 Suitable to Bend Diameters: 20, 25 and 32mm Maximum Bending Angle: 90 degrees Minimum Bend: 356mm ** Minimum Length of Bar Required to Bend: 680mm Dimensions and Weight: 686 x 483 x 152 mm 36 kg ** Minimum Bend measured from bottom of the machine to the top of the bend angle P. F. La Roche & Co. Limited
Power Supply: Hydraulic Power Pack Dimensions and Weight:
110v or 220v 50hz single phase 1.5hp 1.2kw, 32amp plug 372 x 261x 464 mm 34 kg
Pictures show the machine bending 32mm High Tensile Steel 85kg/mm2 to just over 90 degrees
P. F. La Roche & Co. Limited
