Red-Dot Catalog
412034.H01 REDDOT 5/7
5/8/03
9:54 AM
Page H1
Conduit Bodies, Covers and Gaskets. . . . . H2-H5 Mogul Pulling Elbow/Service Entrance Bodies. . . . . . . . . . . . . . . . . . . H6-H8 Zinc Concrete Slab Inserts, Elbows and Plugs . . . . . . . . . . . . . . . . . H9-H11 Industrial Vaportight Lighting . . . . . . . . . H12-H16 Cross Reference . . . . . . . . . . . . . . . . . . . . . . H17 Dry-tite Universal Boxes . . . . H18-H20, H23-H24 ®
Dry-tite Single Gang Covers . . . . . . . . . . . . . H21 ®
Dry-tite Two Gang Covers . . . . . . . . . . . . . . H22 ®
Code Keeper . . . . . . . . . . . . . . . . . . . . . . . . H25 ®
Code-Keeper Wet Location Covers . . . . H26-H28 ®
Weatherproof Covers – While-In-Use Applications. . . . . . . . . . . . . . H29 Dry-tite Round Boxes, Extensions and Covers. . . . . . . . . . . . . . . . . . . . . H30-H32 ®
Dry-tite Lampholders, Garden Lights and Accessories . . . . . . . . . . . . . . . . . H33-H38 ®
SiteLight Overview . . . . . . . . . . . . . . . . . . . . H39 ®
SiteLight Lampholders, Garden Lights and Accessories . . . . . . . . . . . . H40-H47 ®
D-Pak Merchandising System . . . . . . . . H48-H50 ®
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H51
H
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H2
Conduit Bodies, Covers & Gaskets
ALB
ALL
BT
Applications: • Junction for branch conduits - “A” Series bodies for Rigid and IMC conduit maintain a weather resistant conduit system when used with covers and gaskets. - “B” Series bodies for thin wall conduit (EMT) saves cost of connector and labor in indoor applications. • Spacious, accessible wiring chamber provides a convenient location to pull conductors and make splices. • Aluminum conduit bodies can be used with steel rigid conduit NEC 346-1, and Steel EMT, NEC 348-1.
Red•Dot
®
H
Features/Benefits: • • • •
Copper-free* aluminum provides increased corrosion resistance. Precision cast and machined surfaces permit safer wire pulling. Clean cover edges provide good gasket sealing. Precision NPT threaded and set screw hubs allow trouble-free field installation for rigid, IMC or EMT conduit. • Retained deep slotted stainless steel cover screws for faster installation. • Clear UL, CSA and cubic content markings speed approval by inspectors.
Clean cover edges
Copper-free aluminum
Smooth conduit stops
Standard Materials: • Conduit Bodies: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Covers: (CV Series) Die cast aluminum alloy A360 with less than .004 copper content (copper-free), and stainless steel screws. • Covers: (SCV Series) Stamped aluminum alloy with less than .004 copper content (copper-free), and stainless steel screws. • Gaskets: (GKN Series) Neoprene. • Gaskets: (GKV Series) Composition.
Clear markings
Standard Finish: • Conduit bodies and die cast covers: Aluminum lacquer finish. • Stamped covers: Natural. Compliances: • • • •
Retained deep slotted stainless steel screws
UL Listed. CSA Certified. Federal Spec. W-C-586. NEC Article 370-28.
Precision machined threads
Sample Specifications: • Conduit bodies shall be die cast copper-free* aluminum alloy A360. All conduit stops shall be free of rough edges. Conduit bodies shall be finished with powder coated paint. Conduit bodies shall be Red•Dot Catalog No. _______________ *Less than .004 copper content ®
H2
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H3
Conduit Bodies, Covers & Gaskets Threaded bodies for heavy wall rigid and IMC. Set screw bodies for thin wall conduit (EMT).
Through Feed
Cat. No.
Cat. No.
Rigid/IMC AC-1-RD AC-2-RD AC-3 AC-4-RD AC-5 AC-6-RD AC-7• AC-8• AC-9• AC-10-RD•
EMT BC-1 BC-2 BC-3 BC-4 BC-5 BC-6
D-PAK * DAC-1-CG† DAC-2-CG† DAC-3-CG†
• Retained stainless steel cover screws. • Cubic capacity UL and CSA clearly shown. • Smooth throats for easy wire pulling. • Ultra-high pressure die cast copper-free aluminum. • UL Listed, CSA Certified.
Hub Size
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
Cat. No.
AE-1 AE-2
Left/Right Side Opening
Rigid/IMC ALRL-19 ALRL-29 ALRL-39 ALRL-49 ALRL-59 ALRL-69
T-Style
AT-1
BT-1
d"
AT-2 AT-3 AT-4 AT-5 AT-6 AT-7• AT-8• AT-9• AT-10•
BT-2 BT-3 BT-4 BT-5 BT-6
f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
DBLB-1-C9 DBLB-2-C9 DBLB-3-C9
d" f" 1" 1b" 1d" 2"
BLL-1 BLL-2 BLL-3
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
®
Left Side Opening
ALL-1 ALL-2 ALL-3 ALL-4 ALL-5 ALL-6 ALL-7• ALL-8• ALL-9• ALL-10• D-PAK * DALL-1-CG† DALL-2-CG† DALL-3-CG†
Right Side Opening ALR-1 ALR-2 ALR-3 ALR-4 ALR-5 ALR-6 ALR-7• ALR-8• ALR-9• ALR-10• D-PAK * DALR-1-CG† DALR-2-CG† DALR-3-CG†
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
H
®
DAT-1-CG† DAT-2-CG† DAT-3-CG†
d" f" 1"
Covers and Gasket For Threaded and Set Screw Conduit Bodies Cat. No.
BLR-1 BLR-2 BLR-3
d" f" 1" 1b" 1d" 2"
D-PAK *
®
d" f" 1"
EMT BLRL-19 BLRL-29 BLRL-39 BLRL-49 BLRL-59 BLRL-69
®
D-PAK * DALB-1-CG† DALB-2-CG† DALB-3-CG† DALB-4-CG† DALB-5-CG† DALB-6-CG†
d" f" 1" BLB-1 BLB-2 BLB-3 BLB-4 BLB-5 BLB-6 BLB-7• BLB-8• BLB-9• BLB-10•
d" f"
Red•Dot
ALB-1 ALB-2 ALB-3 ALB-4 ALB-5 ALB-6 ALB-7• ALB-8• ALB-9• ALB-10•
Hub Size
Dead End
®
Back-Opening
Cat. No.
Covers
Gaskets
®
d" f" 1"
• Shipped with one CV cover 9 Shipped with one SCV cover †Shipped with one SCV cover and one GKN gasket * See Pages H48-H50 for complete D-PAK assortment
Cat. No.
Die Cast
Stamped
CV-1 CV-2 CV-3 CV-4 CV-5 CV-6 CV-7
SCV-1 SCV-2 SCV-3 SCV-4 SCV-5
Neoprene
Composition
GKN-1 GKN-2 GKN-3 GKN-4 GKN-5 GKN-6 GKN-7
GKV-1 GKV-2 GKV-3 GKV-4 GKV-5 GKV-6 GKV-7
Hub Size
d" f" 1" 1b"-1d" 2" 2d"-3" 3d"-4"
d" f" 1" 1b"-1d" 2" 2d"-3" 3d"-4"
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H3
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H4
Conduit Bodies, Covers & Gaskets C, E, & T Size
A
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
3g 4e 5c 7b 7b 9d 12b 12b 15 15
B
C
D
E
F
G
CI
4c 5a 5n 7g 7g 10i 13 13 16j 16j
1Q 1w 1f 2d 2d 3a 4d 4d 5d 5d
1c 1e 1g 2d 2f 3l 4d 4d 5l 5l
2u 2A 3d 4i 4i 5u 6g 6g 8m 8m
2h 2X 2e 3w 3w 4 5A 5A 6m 6m
m n 1 1c 1d 1O 2k 2k 3 3
4.3 7.3 11.8 32.0 32.0 69.5 190.0 190.0 366.0 366.0
C, E, & T
H E
T
Red•Dot
®
C
LL, LR, & LRL Size
A
B
C
D
E
F
G
H
CI
CI
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
3g 4e 5c 7b 7b 9d 12b 12b 15 15
3d 4a 4g 6d 6d 8l 11b 11b 14k 14k
4j 5a 5j 7g 7g 10i 13 13 16b 16b
1j 11r 1f 2d 2d 3a 4d 4d 5d 5d
1c 1e 1g 2f 2f 3k 4d 4d 5d 5d
3l 4a 4g 6j 6j 8i 10b 10b 12f 12f
2 2j 2d 3c 3c 3n 5d 5d 6d 6d
A g 1 1d 1d 1n 2g 2g 3 3
4.3 7.3 11.8 32.0 32.0 69.5 190.0 190.0 366.0 366.0
4.8 7.5 12.5 36.5 36.5 73.8
LRL STYLE ONLY
LL, LR, & LRL
LL
LR
LRL
Open Thru
H4
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H5
Conduit Bodies, Covers & Gaskets LB Size
A
B
C
D
E
F
CI
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
3g 4e 5c 7b 7b 9d 12b 12b 15 15
4s 5a 5n 7g 7g 9m 13 13 16j 16j
1j 11r 1f 2d 2d 3a 4d 4d 5d 5d
1j 1e 1g 2d 2f 3k 3g 4d 5l 5l
3d 4b 4n 6d 6j 8 10B 10d 13d 13d
2h 2k 2f 3l 3m 4d 5b 5g 6n 6n
4.3 7.3 11.8 32.0 32.0 69.5 190.0 190.0 366.0 366.0
H Size
A
B
C
D
E
SCV-1 SCV-2 SCV-3 SCV-4 SCV-5
CV-1 CV-2 CV-3 CV-4 CV-5 CV-6 CV-7
d" f" 1" 1b" - 1d" 2" 2d" - 3" 3d" - 4"
3g 4e 5c 7b 9d 12s 15o
3d 4a 4g 6d 8l 11b 14k
12D 11r 1f 2d 3a 41r 51r
i i i i i a a
8-32 x c 8-32 x c 8-32 x c 12-24 x k 12-24 x k j-8 x e j-8 x e
Conduit Body Wiring Table* – Style of Fitting Trade Size f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
LB
C
T
LL, LR, LRL
#6 #4 #2 1/0 4/0 300 MCM 400 MCM 500 MCM 500 MCM
#6 #4 #2 1/0 2/0 250 MCM 250 MCM 350 MCM 350 MCM
#6 #4 #2 #1 1/0 2/0 2/0 250 MCM 250 MCM
#6 #4 #2 1/0 4/0 300 MCM 500 MCM 500 MCM 500 MCM
*The Maximum number and size of wire that can be safely pulled is based on three type XHHW wires or equal.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H5
®
Cat. No.
Red•Dot
CV & SCV Cat. No.
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H6
Mogul Pulling Elbow/Service Entrance Bodies
ASLB
ASLB-XL
Applications: • Raintight junction for bringing electrical service into a location. • Accessible wiring chamber provides a convenient location to pull conductors and make splices.
Smooth conduit stops
Copper-free aluminum Clean cover edges
Features/Benefits:
Red•Dot
®
H
• • • •
Copper-free* aluminum provides increased corrosion resistance. Precision cast and machined surfaces permit safer wire pulling. Clean cover edges provide good gasket sealing. Precision NPT threaded hubs allow trouble-free field installation for rigid and IMC conduit. • Retained deep slotted stainless steel cover screws for faster installation. • Clear UL, CSA and cubic content markings speed approval by inspectors.
Clear markings
Standard Materials: • Service Entrance Bodies: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Covers d" and f": Stamped aluminum alloy, and stainless steel screws. • Covers 1" through 4": Die cast aluminum alloy A360 with less than .004 copper content (copper-free), and stainless steel screws. • Gaskets: Composition.
Complete with cover and gasket
Precision machined threads
Standard Finish: • Aluminum lacquer finish. Compliances: • • • •
UL Listed. CSA Ceritfied. Federal Spec. W-C-586. NEC Article 370-5 and 370-28.
Sample Specifications: • Service Entrance Fittings shall be die cast copper-free* aluminum alloy A360. All conduit stops shall be free of rough edges. Service Entrance Fittings shall be finished with aluminum lacquer. Service Entrance Fittings shall be Red•Dot Catalog No. _________ *Less than .004 copper content
Mounts flush to the wall
Retained deep slotted screws
®
H6
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H7
Mogul Pulling Elbow/Service Entrance Bodies Spacious, accessible wiring chamber for pulling conductors, making splices, and bringing electrical service into a location. • Dome cover - extra bending room. • Deep slotted stainless steel cover screws. • “I” beam construction adds strength. • Smooth throats for easy wire pulling. • Extra wiring room. • Meets NEC Article 370-28. • Ultra-high pressure die cast aluminum. • UL Listed, CSA Certified. • Copper-free aluminum, less than .004 copper content.
Cat. No.
Hub Size
Hub Size
MGKV-4 MGKV-5 MGKV-6 MGKV-7
1 or 1b" 1d" or 2" 2d" or 3" 3d" or 4"
Composition Gasket
Bodies with Covers and Gaskets
H
®
1" 1b" 1d" 2" 2d" 3" 3d" 4’
Red•Dot
MALB-3 MALB-4 MALB-5 MALB-6 MALB-7 MALB-8 MALB-9 MALB-10
Cat. No.
Service Entrance Bodies Accessible junctions for bringing electrical service into a location. • Mounts flush to wall. • Standard and extra long configurations. • Retained deep slotted stainless steel cover screws. • Smooth throats for easy wire pulling. • Ultra-high pressure die cast aluminum. • Meets NEC Article 370-28. • UL listed, CSA Certified. • Copper-free aluminum, less than .004 copper content.
Cat. No.
Hub Size
2 ⁄2" - 4" Bodies with Covers and Gaskets 1
SALB-7 SALB-8 SALB-9 SALB-10 Cat. No.
Hub Size
⁄2" - 2" Bodies with Covers and Gaskets
1
ASLB-1 ASLB-2 ASLB-3 ASLB-4 ASLB-5 ASLB-6
2d" 3" 3d" 4"
Extra Long Bodies with Covers and Gaskets d" f" 1" 1b" 1d" 2"
ASLB-XL4 ASLB-KL6
1b" 2"
NOTE: Raintight when used with appropriate Red•Dot covers. * See Pages H48-H50 for complete D-PAK assortment. ®
®
D-PAK * ®
DASLB-1 DASLB-2 DASLB-3
d" f" 1"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H7
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H8
Mogul Pulling Elbow/Service Entrance Bodies ASLB
ASLB & ASLB-XL
Size
A
B
C
D
E
F
CI
d" f" 1" 1b" 1d" 2"
3h 3n 4b 5d 6b 6f
2f 3b 3g 5b 6 6d
1b 1d 1f 2c 2k 3a
1l 1f 2i 3 3b 4
1a 1c 1f 2i 2k 2g
1h f 1h 1b 1d 1e
2.0 3.0 5.5 13.0 18.8 38.8
E
F
CI
1j 1e
24.5 58.0
ASLB-XL Size
A
B
C
D
1b" 2"
8 9n
7d 9f
2d 3c
2f 3f
2r 21j
H Red•Dot
®
SALB Size
A
B
C
D
E
F
G
2d" 3" 3d" 4"
13 13 16d 16d
12e 12e 15c 15c
4m 4d 5d 5d
4d 5b 6b 6b
3c 4a 5a 5a
2b 2k 2f 2f
5g 6k 7l 7l
CI 190 190 366 366
SALB
MALB Size
A
B
C
D
E
F
G
CI
1" 1b" 1d" 2" 2d" 3" 3d" 4"
9e 9e 14w 14w 21W 21W 28e 28e
9h 9h 14b 14b 21X 21X 28W 28W
2d 2d 2f 2f 4d 4d 5d 5d
2f 2f 4 4 5e 5e 6d 6d
2h 2h 21i 21i 4a 4a 5a 5a
8d 8d 13 13 18 18 24 24
3e 3e 5r 5r 7z 7z 9z 9z
40 40 128 128 398 398 766.7 766.7
MALB
H8
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H9
Zinc Concrete Slab Inserts, Elbows and Plugs
ESL
ES
Applications:
Old Way
• Permits in-slab ceiling drops and floor mounts in poured concrete. • Provides flush threaded conduit hub for mounting, pulling and future access to conduit systems. • Design permits prefabrication of in-slab conduit system. Features/Benefits:
Conduit running in a cement slab is bent 90º to run through a hole drilled in the form. Drilling takes time and damages the form. Stripping form often damages conduit stubs. Varying length of stubs requires individual measuring and cutting of conduit drops.
®
®
Red•Dot Way
4" Slab
ESL
Standard Material: • Die cast zinc alloy ZAMAK 3. Certified by the Certified Zinc Alloy Plan (CZAP).
6" Slab
Standard Finish: • Natural. ES
Compliances: • UL Listed. • CSA Certified. Sample Specifications: • Concrete Slab Inserts shall be die cast Zinc Alloy* ZAMAK 3. All conduit stops shall be coined and free of rough edges. Service Entrance Fittings shall be Red•Dot Catalog No. _______________ * Certified by the American Die Casting Institute.
Conduit running in a cement slab is attached to a 90º concrete slab insert, or conduit is bent 90º and is threaded to a straight insert. Nail or screw fitting to wood or metal forms. After concrete is poured and forms stripped, conduit drops quickly into fittings from floor below. Drops are easily measured from ceiling line to switch or outlet height and cut in uniform lengths.
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H Red•Dot
• Flush design leaves no broken or bent stubs for easy removal of undamaged forms. • Flush design permits simplified in-slab work. • Flush design leaves a neat, uncluttered job. • Offered in straight ES configuration for straight through conduit runs and mounting of floor boxes in slabs over 6" thick. • Offered in ESL configuration to eliminate bending of conduit in slabs over 4" thick. • Precision cast and machined surfaces permit safer wire pulling. • ZAMAK 3 Zinc can be embedded in concrete.
H9
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H10
Zinc Concrete Slab Inserts, Elbows and Plugs
Concrete slab inserts permit in-slab ceiling drops and floor mounts in poured concrete.
4" Slab ESL
• For Rigid and IMC. • Slab insert is nailed to form prior to pour. • Removable seal keeps threads cement free. • ESL eliminates: - Bends in 4" concrete slabs. - Damage to form. - Cutting off conduit stubs. • UL Listed, CSA Certified.
6" Slab ES
Threaded Rigid or IMC Conduit Inserts
Red•Dot
®
H
Cat. No.
Hub Size
Straight
Cat. No.
Hub Size
ESL-1 ESL-2 ESL-3
d" f" 1"
90˚ ES-1 ES-2 ES-3
d" f" 1"
Elbows and Plugs
Close Up Plugs, Zinc
Female to Female Aluminum Elbows Cat. No.
Cat. No.
Hub Size
Corner Rigid IMC
EMT
ACE-1 ACE-2
BCE-1 BCE-2
d" f"
Pulling Rigid IMC
EMT
APEF-1 APEF-2
BPEF-1 BPEF-2
Cat. No.
Color
Hub Size
PLG-1-RD PLG-2-RD PLG-3-RD
Silver Silver Silver
d" f" 1"
Silver Bronze White Silver
d" d" d" f"
D-PAK * ®
DPLG-1 DPLG-1-BR DPLG-1-WH DPLG-2
d" f"
* See Pages H48-H50 for complete D-PAK assortment ®
H10
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H11
Zinc Concrete Slab Inserts, Elbows, and Plugs ESL Cat. No.
Size
A
B
C
D
E
F
G
ESL-1 ESL-2 ESL-3
d" f" 1"
4B 5™ 5q
3} 3z 3f
3C 4a 3n
3i 3p 2©
1g 2a 2k
1o 1b 11r
b b b
ESL
ES Cat. No.
Size
A
B
C
D
E
ES-1 ES-2 ES-3
d" f" 1"
1∂ 2™ 2l
1l 1e 2
1z 1O 2j
1o 1b 1w
b b b
H Red•Dot
ES
®
APEF and BPEF Size d" f"
APEF
A
B
C
1h 1i
r l
1a 1R
BPEF
ACE and BCE Size d" f"
ACE
A
B
2c 2y
1a 1j
BCE
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H11
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H12
Industrial Vaportight Lighting
VAG-C
VKG-C
VWG-C
VXG-C
VXWG-C
Applications:
Red•Dot
®
H
• Low maintenance indoor/outdoor lighting where moisture, dirt, dust, corrosion and rough service are problems. • Low profile fixture design for where low ceiling height presents a lighting problem. • To light cold storage facilities, walkways, bridges, tunnels and security locations. • Used with colored globes as warning, caution or directional lights. • For 100 or 200 watt medium base incandescent lamps. Features/Benefits: • Copper-free* aluminum and stainless steel screws provide increased corrosion resistance. • Precision cast and machined surfaces permit safer wire pulling. • Fully threaded glass globes prevent cross threading assuring a tight seal. • High quality replaceable porcelain socket with high temperature leads result in a long-lasting fixture. • Five mounting configurations packaged three different ways to suit all customer requirements • Colored, heat resistant and shatterproof LEXAN globes available. ®
Standard Materials: • Fixture and guards: Die cast aluminum alloy A360 with less than .004 copper content (copper-free), and stainless steel screws. Globe: Lime crystal glass. Socket: Center contact, porcelain, medium base. Standard Finish: • Aluminum lacquer finish. Compliances: • UL Listed. • Suitable for use in Wet Locations only when oriented as shown. (mounted with lamp base up and guard/globe down). Sample Specifications: • Fixture shall be die cast copper-free* aluminum alloy A360. All conduit stops shall be coined and free of rough edges. LEXAN globes shall have full threads. Sockets shall be porcelain. Fixtures shall be finished with aluminum lacquer. Fixtures shall be Red•Dot Catalog No. _______________ ®
®
*Less than .004 copper content
H12
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H13
Industrial Vaportight Lighting Ceiling Mount with Adapter Plate Cat. No.
Hub Size
Max. Watt
Description
VK-11 VK-21 VK-12 VK-22
d" f" d" f"
100 100 200 200
Pendant cap with socket screw terminals, gasket and screws
VKG-11 VKG-21 VKG-12 VKG-22
VKG-11-C VKG-21-C VKG-12-C VKG-22-C
d" f" d" f"
d" f" d" f"
100 100 200 200
100 100 200 200
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
100 200
Ceiling outlet box cap with socket with leads, gasket and screws
VAG-01 VAG-02
100 200
Ceiling outlet box cap with socket with leads, gasket, screws, and globe
VAG-01-C VAG-02-C
100 200
Ceiling outlet box cap with socket with leads, gasket, screws, globe and cast guard
Cat. No.
Pendant cap with socket screw terminals, gasket, screws and globe
Pendant cap with socket screw terminals, gasket, screws, globe and cast guard
VA-01 VA-02
Ceiling Mount Cross Feed (5 tapped holes)
Pendant Mount Cat. No.
Description
H
®
• Compatible with incandescent and most self-ballasted compact fluorescent bulbs. • For indoor or outdoor use. • Fixture and guard die cast copper-free aluminum, less than .004 copper content. • Available in components or complete fixture. • Low silhouette incandescent vaportight. • Variety of mounting configurations. • UL Listed.
Max. Watt
Red•Dot
Low maintenance indoor lighting where moisture, dirt, dust, corrosion and rough service are a problem.
Hub Size
Hub Size
Max. Watt
Description
VX-11 VX-21 VX-12 VX-22
d" f" d" f"
100 100 200 200
Ceiling-cross feed box with gaskets, socket with leads, screws, 4 closure plugs and cast mounting lugs
VXG-11 VXG-21 VXG-12 VXG-22
d" f" d" f"
100 100 200 200
Ceiling-cross feed box with gaskets, socket with leads, screws, 4 closure plugs, cast mounting lugs and globe
VXG-11-C VXG-21-C VXG-12-C VXG-22-C
d" f" d" f"
100 100 200 200
Ceiling-cross feed box with gaskets, socket with leads, screws, 4 closure plugs, cast mounting lugs, globe and cast guard
NOTE: For upright mounting only. Caution: In ordering Lexan Globe, wattage is rated 75% of standard globe size i.e. VGLL-02 is for use on 200 watt fixtures, but only rated for 150 watt lamps.
www.tnb.com
H13
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H14
Industrial Vaportight Lighting Wall Mount with Adapter Plate
Wall Mount Cross Feed (5 tapped holes)
Cat. No.
Max. Watt
Description
Cat. No.
Hub Size
Max. Watt
Description
VW-01 VW-02
100 200
Wall mount unit with socket with leads, gaskets, and screws
VXW-11 VXW-21 VXW-12 VXW-22
d" f" d" f"
100 100 200 200
VWG-01 VWG-02
100 200
Wall mount unit with socket with leads, gaskets, screws, and globe
Wall mount cross feed with socket with leads, gaskets,and screws, 4 closure plugs, and cast mounting lugs
VXWG-11 VXWG-21 VXWG-12 VXWG-22
d" f" d" f"
100 100 200 200
Wall mount cross feed with socket with leads, gaskets, screws, 4 closure plugs, cast mounting lugs, and globe
VWG-01-C VWG-02-C
100 200
Wall mount unit with socket with leads, gaskets, globe, screws, and cast guard
VXWG-11-C VXWG-21-C VXWG-12-C VXWG-22-C
d" f" d" f"
100 100 200 200
Wall mount cross feed with socket with leads, gaskets, screws, 4 closure plugs, cast mounting lugs, globe and cast guard
Red•Dot
®
H
Industrial Vaportight Accessories
Globes
Guards Cat. No.
Max. Watt
Description
VGL-01 VGLA-01 VGLB-01 VGLG-01 VGLR-01 VGLH-01
100 100 100 100 100 150
Clear Amber Blue Green Red Clear heat resistant
VGL-02 VGLR-02 VGLH-02
200 200 300
Clear Red Clear heat resistant
VGLL-01 VGLL-02 VGLA-A1 VGLA-R1
75 150 75 75
Clear prismatic Clear prismatic Amber Red
Glass
Cat. No.
Max. Watt
Description
VGW-01 VGW-02
100 200
Clamp on plated steel guards
VGD-01 VGD-02
100 200
Die cast aluminum guards with positive locking screws.
Wire
Lexan
Not for use with guards.
Die Cast
Vaportight Boxes and Covers Cat. No.
NOTE: For upright mounting only. Caution: In ordering Lexan Globe, wattage is rated 75% of standard globe size i.e. VGLL-02 is for use on 200 watt fixtures, but only rated for 150 watt lamps.
LVX-1 LVX-2
V-B
H14
Max.Watt
Description
d" f"
Box, 3d" diameter, 5 tapped holes, 4 closure plugs with cast mounting lugs
none
Blank Cover 3d" diameter
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H15
Industrial Vaportight Lighting Pendant Mount (VKG)
VKG
Ceiling Mount (VAG)
Cat. No.
A
B
VKG-11 VKG-21 VKG-12 VKG-22
3c 3c 4c 4c
8i 8i 10a 10a
Cat. No.
C
D
4h 4h 5b 5b
8f 8f 10e 10e
Cat. No.
A
B
VAG-01 VAG-02
3c 4c
7k 9c
Cat. No.
C
D
4h 5b
7n 9m
VKG-11-C VKG-21-C VKG-12-C VKG-22-C
VAG
Red•Dot
VAG-01-C VAG-02-C
H
®
Ceiling Mount Cross Feed (VXG)
VXG
Wall Mount (VWG)
Cat. No.
A
B
E
F
VXG-11 VXG-21 VXG-12 VXG-22
3c 3c 4c 4c
81i 81i 10f 10f
3d 3d 3d 3d
1e 1e 1e 1e
Cat. No.
C
D
4h 4h 5b 5b
9j 9j 11i 11i
Cat. No.
A
B
E
F
VWG-01 VWG-02
3c 4c
8k 10c
4f 5f
3d 3d
VXG-11-C VXG-21-C VXG-12-C VXG-22-C
VWG
Cat. No. VWG-01-C VWG-02-C
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
C
D
4h 5b
8n 10m
H15
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H16
Industrial Vaportight Lighting Wall Mount Cross Feed (VXWG)
VXWG Cat. No.
A
B
VXWG-11 VXWG-21 VXWG-12 VXWG-22
3c" 3c" 4c" 4c"
8k" 8k" 10c" 10c"
VXWG-11-C VXWG-21-C VXWG-12-C VXWG-22-C
3c 3c 4c 4c
8k 8k 10c 10c
C
4h" 4h" 5i" 5i"
D
8n" 8n" 10m" 10m"
LVX-1 LVX-2
E
F
1e" 1e" 1e" 1e"
3d" 3d" 3d" 3d"
1e" 1e" 1e" 1e"
3d" 3d" 3d" 3d"
1e" 1e"
3d" 3d"
G
H
I
J
CI
e" e"
5" 5"
4k" 4k"
2m" 2m"
10.3 10.3
E
I.D
g" g" g" g"
21h" 31i" 2g" 3g" 2g" 2g"
Red•Dot
®
H
Threaded Glass Globe (VGL)
Threaded Glass Plastic Globe (VGL, VGLL)
VGL Cat. No. VGL-01series VGL-02 series VGLL-01 VGLL-02 VGLA-A1 VGLA-R1
A
B
C
D
3c" 4c" 3W" 4W" 3W" 3W"
6W" 8c" 5n" 8b" 5n" 5n"
3j" 4j" 3c" 4c" 3c" 3c"
1" 1"
Guards (VGD, VGW)
VGD, VGW
H16
Cat. No.
A
B
VGD-01 VGD-02 VGW-01 VGW-02
4h" 5j" 4h" 5j"
7" 8e" 6g" 8f"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H17
Cross Reference Ceiling Mount
Wall Mount
red•dot
Stonco
Killark
Appleton
VA-01 VA-02 VAG-01 VAG-02 VAG-01-C VAG-02-C
VK1 VK2 VK1K VK2K VK1GC VK2GC
VFC-100 VFC-200 VOB-100 VOB-200 VOBG-100 VOBG-200
JB1-A JB1-A JB10-A JB20-A JB10G-A JB20G-A
Crouse Hinds VXH15 VXH12 – – VXH15GP VXH12GP
Ceiling Mount Cross-Feed Stonco
VX-11
VCXL11
VXA-1 VGX-1
VX-21
VK1+VXL13
VXA-2 VGX-2
VX-12
VCXL21
VXA-1 VGX-1
VX-22
VK2+VXL13
VXA2 VGX-2
VXG-11
VCXL11K
VXG-12
VXG-22
VXG-11-C
VXG-21-C
VXG-12-C
VXG-22-C
VXAG-110 VUXV-1-100 VUCG-1-100 VUHG-1-100 VK1K+VXL13 VXAG-210 VUXG-2-100 VUCG-2-100 VUHG-2-100 VCXL21K VXAG-120 VUXG-1-200 VUCG-1-200 VUHG-1-200 VK2K+VXL13 VXAG-220 VUXG-2-200 VUCG-2-200 VUHG-2-200 VCXL11GC VXAGG-110 VUXGG-1-100 VUCGG-1-100 VUHGG-1-100 VK1GC+VXL13 VXAGG-210 VUXGG-2-100 VUCGG-2-100 VUHGG-2-100 VCXL21GC VXAGG-120 VUXGG-1-200 VUCGG-1-200 VUHGG-1-200 VK2GC+VXL13 VXAGG-220 VUXGG-2-200 VUCGG-2-200 VUHGG-2-200
Stonco
VK-11 VK-21 VK-12 VK-22 VKG-11 VKG-21 VKG-12 VKG-22 VKG-11-C VKG-21-C VKG-12-C VKG-22-C
VP-11 – VP21 – VP11K – VP21K – VP11GC – VP21GC –
Killark VGA-1 VGA-2 VGA-1 VGA-2 VUAG-1-100 VUAG-2-100 VUAG-1-200 VUAG-2-200 VUAGG-1-100 VUAGG-2-100 VUAGG-1-200 VUAGG-2-200
Appleton
Crouse Hinds
VW-01 VW-02 VWG-01 VWG-02 VWG-01-C VWG-02-C
VW1 VW2 VW1K VW2K VW1GC VW2GC
VB-1 VB-2 VOBL-100 VOBL-200 VOBLG-100 VOBLG-200
JBW1-A JBW1-A JBW10-A JBW20-A JBW10G-A JBW20G-A
VG175, VXHB15 VXHB12 – – VG1759, VXHB15GP VXHB12GP
Appleton
Crouse Hinds
Wall Mount Cross-Feed Appleton VXHA50-A VC50-A V50-A VXHA75-A VC75-A V75-A VXHA50-A VC50-A V50-A VXHA75-A VC75-A V75-A VXHA1050-A VC1050-A V1050-A
Crouse Hinds VXHF15 V175 VC175 VXHF25 V275 VC275 VXHF12 VXHF22
–
VXHA2050-A VC2050-A V2050-A
–
VXHA2075-A VC2075-A V2075-A
–
VXHA1050G-A VC1050G-A V1050G-A
VXHF15GP V1759 VC1759
VXHA1075G-A VC1075G-A V1075G-A
VXHF25GP V2759 VC2759
VXHA2075G-A VC2050G-A V2050G-A
VXHF12GP
VXHA2075G-A VC2075G-A V2075G-A
VXHF22GP
VA50-A VA75-A VA50-A VA75-A VA1050-A VA1075-A VA2050-A VA2075-A VA1050-G-A VA1075-G-A VA2050G-A VA2075G-A
Stonco
VXW-11 VXW-21 VXW-12 VXW-22 VXWG-11 VXWG-21 VXWG-12 VXWG-22 VXWG-11-C VXWG-21-C VXWG-12-C VXWG-22-C
VWXL11 VW1+VXL13 VWXL21 VW2+VXL13 VWXL11K VW1K+VXL13 VWXL21K VW2K+VXL13 VWXL11GC VW1GC+VXL13 VWXL21GC VW2GC+VXL13
Killark VB-1+VBC-1 VB-2+VBC-2 VB-1+VBC-1 VB-2+VBC-2 VOBL-100+VBC-1 VOBL-200+VBC-2 VOBL-100+VBC-1 VOBL-200+VBC-2 VOBLG-100+VBC-1 VOBLG-200+VBC-2 VOBLG-100+VBC-1 VOBLG-200+VBC-2
– VGAT75-A – VGAT75-A – VGAT1075-A – VGAT2075-A – VGAT1075G-A – VGAT2075G-A
VJ175, VXHF15 VJ275, VXHF25 VXHF12 VXHF22 – – – – VJ1759, VXHBF15GP VJ2759, VXHBF25GP VXHBF12GP VXHBF22GP
Accessories
VXHA1075-A VC1075-A V1075-A
Appleton
red•dot
–
Pendant Mount red•dot
Killark
red•dot
Stonco
LVX-1
VXL1
LVX-2
VXL13
V-B V-1 V-2 VGD-01 VGD-02 VGD-01 VGD-02 VGLA-01 VGLA-02 VGLB-01 VGLB-02 VGLG-01 VGLG-02 VGLH-01 VGLH-02 VGLR-01 VGLR-02 VGLL-01 VGLL-02 VGLA-A1 VGLA-R1 VGW-01 VGW-02
– – – V131 V132 VGC100 VGC200 VGA100 VGA200 VGB100 VGB200 VGG100 VGG200 VGCH100 VGCH200 VGR100 VGR200 VPRC5 VPRC10 – – V127 V128
Killark
Appleton
Crouse Hinds
Crouse Hinds
VGH-1, VBC-1 VGX-1 VLJSX-1 VGC-1 VGH-2, VBC-2 VGC-2 VLJSX-2 VGC-2 VG-2 VAG-100 VAG-200 VCG-100 VCG-200 VAMG-100 VAMG-200 VBG-100 VBG-200 VGG-100 VGG-200 VCGP-100 VCGP-200 VRG-100 VRG-200 VPLCG-100 VPLCG-200 – – – –
JBX50L-A
VXFT10 VXF10
JBX75L-A
VXFT20 VXF20
JBK-1B-CA JBK-50-A – VGU-1 VGU-2 VGL-1CL VGL-2CL VGL-1AM VGL-2AM VGL-1BL VGL-2BL VGL-1GR VGL-2GR VGL-1HR VGL-2HR VGL-1RE VGL-2RE – – – – VWG-1 VWG-2
GRF10 GRF11 GRF12 V910, V911, P50 P21 G54 G24 VN76, G58 G28 VN73, G56 G26 VN72, G55 G25 V63, V183, G34, G251 V93 VN85, VN75, G57 G27 V470 G63 G65 V475, G67
VDA15, VDA175 VDA25, VDA275 VDA12 VDA22 – – – – VDA15GP VDA25GP VDA12GP VDA22GP
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
H
®
VXG-21
Killark
Stonco
Red•Dot
red•dot
red•dot
www.tnb.com
H17
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H18
®
Dry-tite Universal Boxes
IH3-1-LM
2IH5-1
CCD
2CCTS
Applications: • Dry-tite boxes and covers protect wiring devices, switches, electronic components, and terminal blocks in Dry, Damp and Wet Locations. • Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices. • Junction box for branch conduits. ®
Red•Dot
®
H
Securely fastened mounting plates
Stainless steel springs
Corrosion resistant metal
Features/Benefits: • Alloy A380 aluminum, certified zinc alloy, and stainless steel springs provide increased corrosion resistance. • Die cast construction and industrial design combine to produce a rugged protective enclosure for devices on many applications. • Clean cover edges provide good gasket sealing. • Precision cast and machined surfaces permit safer wire pulling. • Clear UL and cubic content markings speed approval by inspectors. • Convenient mounting lugs for a variety of mounting methods. • Securely fastened mounting plates reduce costly call backs. Standard Materials: • Boxes: Die cast aluminum alloy A380. • Cover Plates: Stamped aluminum alloy or certified die cast zinc alloy ZAMAK 3. • Cover Lids: Certified die cast zinc alloy ZAMAK 3. Standard Finish: • Aluminum lacquer finish. Compliances: • • • • • • •
Clear marking
UL Listed. Boxes: CSA Certified with factory installed ground screw.** Covers: CSA Certified. Covers suitable for use in Wet Locations with covers closed. CCB and CCT series covers suitable for use in Wet Locations. Federal Spec. W-C-586. NEMA 3R Rated.
Clean cover edges
Precision machined threads Ground screw
Sample Specifications: • Universal device boxes and covers shall be of aluminum alloy A380 and certified zinc alloy. All conduit stops shall be free of rough edges. Covers shall have stainless steel springs. Covers shall be finished with aluminum lacquer. Universal device boxes And covers shall be Red•Dot Catalog No. ____________ ®
**Consult factory for lead time and minimum quantity.
H18
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H19
Accessible wiring chamber provides a convenient location to pull conductors and make splices in dry, damp or wet locations.
®
Dry-tite Universal Boxes
• Maximum cubic capacity. • Securely fastened mounting plates. • Corrosion resistant materials. • Powder coated finish. • Ground screw included. • Precision machined threads. • Clear UL and cubic volume marking.
Two Gang Cat. No.
Hub Size
Outlets
2IH3-1• 2IH3-2•
d" f"
Top 1 Bottom 1 Back 1 Total 3
Three Outlets
Single Gang Cat. No.
Hub Size
Color
Outlets
D-PAK * ®
Three Outlets IH3-1 IH3-2 IH3-1-LM• IH3-2-LM•
Silver Silver Silver Silver
d" d" d" f" 1"
Silver Bronze White Silver Silver
Top 1 Bottom 1 Back 1 Total 3
d"
2IH4-1• 2IH4-2•
d" f"
Four Outlets
D-PAK * ®
DIH3-1-LM• DIH3-1-LM-BR• DIH3-1-LM-WH• DIH3-2-LM• DIH3-3-LM
Five Outlets
d" f" d" f"
Silver Silver Silver Silver
DIH4-1-LM• DIH4-1-LM-BR• DIH4-1-LM-WH• DIH4-2-LM•
d" d" d" f"
Silver Bronze White Silver
IH5-1 IH5-2 IH5-1-LM• IH5-2-LM•
d" f" d" f"
Silver Silver Silver Silver
d" f"
Silver Silver
d" f"
Silver Silver
2IH5-1• 2IH5-2•
d" f"
Top 2 Bottom 2 Back 1 Total 5
2IH5S2-1• 2IH5S2-2•
d" f"
Top 1 Bottom 1 Side 1 Side 1 Back 1 Total 5
2IH7-1• 2IH7-2•
d" f"
Top 3 Bottom 3 Back 1 Total 7
2IH7S2-1• 2IH7S2-2•
d" f"
Top 2 Bottom 2 Side 1 Side 1 Back 1 Total 7
Top 2 Bottom 1 Back 1 Total 4
D-PAK * ®
Five Outlets (2 side)
Five Outlets Top 2 Bottom 2 Back 1 Total 5
Seven Outlets
D-PAK * ®
DIH5-1-LM• DIH5-2-LM• Five Outlets (2 side) IH5S2-1• IH5S2-2•
Top 1 Bottom 1 Side 1 Side 1 Back 1 Total 5
Seven Outlets (2 side)
Six Outlets (3 side) IH6S2-1• IH6S2-2•
d" f"
Silver Silver
Top 1 Bottom 1 Side 2 Side 1 Back 1 Total 6
NOTE: Raintight when used with appropriate Red•Dot covers. Boxes supplied with 2 closure plugs and ground screw. • With mounting lugs * See Pages H48-H50 for complete D-PAK assortment. ®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H19
H
®
Four Outlets IH4-1 IH4-2 IH4-1-LM• IH4-2-LM•
Top 2 Bottom 1 Back 1 Total 4
Red•Dot
d" f" d" f"
D2IH3-1
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H20
®
Dry-tite Universal Boxes Extensions – Single Gang
Deep Boxes – Single Gang Cat. No.
Hub Size
Cat. No.
Outlets
Hub Size
Outlets
Description
IHE
N/A
0
Extension ring for one gang box with gasket and screws
IHE4-1
d"
Top 2 Bottom 2 Total 4
Four hole extension ring for one gang box with 4 plugs, gasket and screws
d" f"
Top 1 Bottom 1 Total 2
d" f"
Top 2 Bottom 2 Side 1 Side 1 Total 6
6 Hole flanged box extension adapter with four plug gasket and screws
Hub Size
Outlets
Description
N/A
0
Extension ring for two gang boxes with gasket and screws
Hub Size
Outlets
Description
d" f"
4
Round extension with gasket and screws
No Outlets
Three Outlets IHD3-1• IHD3-2• IHD3-3•
d" f" 1"
Top 1 Bottom 1 Back 1 Total 3
Four Outlets
Four Outlets IHD4-1• IHD4-2•
d" f"
Top 2 Bottom 1 Back 1 Total 4 Two Outlets, Flanged
Add-On
Red•Dot
®
H
IHEF2-1 IHEF2-2 Two Gang Five Outlets 2IHD5-2• 2IHD5-3•
f" 1"
Top 2 Bottom 2 Back 1 Total 5
Six Outlets, Flanged
Add-On
IHEF6S2-1 IHEF6S2-2
Three Gang Seven Outlets 3IHD7-2• 3IHD7-3•
f" 1"
Top 3 Bottom 3 Back 1 Total 7
2 Hole flanged box extension adapter with one plug gasket and screws
Two Gang Cat. No. No Outlets 2IHE
Mounting Lugs
• With mounting lugs
H20
Cat. No.
Description
LM
2 mounting lugs with self tapping screws. For LM boxes only
Round Cat. No. Four Outlets SE-47 SE-48
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H21
®
Dry-tite Single Gang Covers Single Gang Device Covers Cat. No.
Color
Description
Silver
Device mount
Silver Bronze White Silver Bronze White
Device mount Device mount Device mount Device mount stay open Device mount stay open Device mount stay open
CCDV CCDV-L
Silver Silver
Device mount Device mount with lock option
D-PAK * DCDV DCDV-BR DCDV-WH
Silver Bronze White
Device mount Device mount Device mount
Silver
Device mount
Silver Bronze White
Device mount Device mount Device mount
Silver Silver
Silver Bronze White
Duplex receptacle cover, horizontal CCD
Cat. No.
Color
Description
Single Receptacle Cover, vertical - 1.59" Opening Silver
CCSV-TL
Device mount
D-PAK * ®
DCCD DCCD-BR DCCD-WH DCCDSO DCCDSO-BR DCCDSO-WH
Integral Locking Hasp
NEW
Motor base plug and cover, horizontal CCMB
Silver
Device mount 15A-125V motor base plug
CCT
Silver
Device mount switch cover only, packed with spacers and screws
Duplex receptacle cover, vertical
®
Switch cover only
GFCI receptacle cover, horizontal
Red•Dot
CCG
H
D-PAK * ®
Switch cover with switch
®
DCCG DCCG-BR DCCG-WH
CCT-1 CCT-1-20 CCT-2-20
Silver Silver Silver
Device mount Device mount with lock option
CCT-3
Silver
Device mount Device mount Device mount
Single Gang Lampholder Covers
GFCI receptacle cover, vertical CCGV CCGV-L
Single pole 15A, 125V Single pole 20A, 120-277V Double pole 20A, 120-277V All with spacers and screws 3-way switch 15A, 125V
D-PAK * ®
DCGV DCGV-BR DCGV-WH
Single receptacle cover, horizontal - 1.485" Diameter Opening CCS
Silver
Device mount
Single receptacle cover, vertical - 1.59" Diameter Opening CCSV CCSV-L
Silver Silver
CCPO
Silver
Device mount Device mount with lock option Power outlet cover with 2.156" diameter opening. Box mount.
LC-11
Cat. No.
Cat. No.
Standard (2m" x 4d") LC-11
Jumbo (3a" x 5a") LF11
Size
Description
d"
One hole Device mount. Two holes. Device mount. Three holes. Device mount.
LC-21
___
d"
LC-31
LF31
d"
Cat. No.
Color
Size
Description
DLC-31
Silver
d"
DLC-31-BR
Bronze
d"
DLC-31-WH
White
d"
Three holes Device mount Three holes Device mount Three holes. Device mount
D-PAK * ®
LC-21
Single Gang Gaskets Cat. No.
Color
Description
CCK CCSK
Black Black
Neoprene Neoprene
LC-31 NOTE: Raintight when used with appropriate Red•Dot boxes • All covers packed with gasket and screws * See Pages H48-H50 for complete D-PAK assortment ®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H21
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H22
®
Dry-tite Two Gang Covers Two Gang Device Covers Cat. No.
Description
Two duplex receptacle cover
Cat. No.
Description
Double Switch Cover Device mount Device mount with lock option
2CCD 2CCD-L
2CCT 2CCT-1
Cover only, packed with spacers Cover with two single pole 15A, 125V switches and spacers
Two GFCI receptacle cover Device mount
2CCG
Switch and one duplex receptacle cover 2CCTD 2CCTD-1
One duplex and one GFCI receptacle cover Device mount
2CCDG
Switch and one GFCI receptacle cover 2CCTG
Red•Dot
®
H
Cover only, packed with spacers Cover with one switch single pole 15A, 125V and one duplex receptacle and spacers
Device mount cover only with spacers
Two single receptacle cover - 1.485" Diameter Opening Device mount
2CCS
®
Dry-tite Blank Covers Cat. No.
Color
Description
CCB CCB-FS
Silver Silver
Device mount Box mount
DCCB DCCB-BR DCCB-WH
Silver Bronze White
Device mount
2CCB 2CCB-FS
Silver Silver
Device mount Box mount
D2CCB
Silver
Device mount
3CCB
Silver
Box mount
Single Gang One single receptacle and one duplex receptacle cover 1.485" Diameter Opening Device mount
2CCSD
D-PAK * ®
Two Gang Single receptacle and one GFCI receptacle cover 1.485" Diameter Opening Device mount
2CCSG
D-PAK * ®
Three Gang NOTE: Raintight when used with appropriate Red•Dot boxes. All covers packed with gasket and screws. * See Pages H48-H50 for complete D-PAK assortment ®
®
H22
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H23
®
Dry-tite Universal Boxes Single Gang Boxes
Single Gang Boxes Cat. No. IH IH IH-LM IH-LM IH-S IH-S IHD IHD IHD
IH
Hub Size
A
B
C
D
d" f" d" f" d" f" d"’ f" 1"
4l 4l 4l 4l 4l 4l 4l 4l 4l
2m 2m 2m 2m 2m 2m 2m 2m 2m
2 2 2 2 2 2 2e 2e 2e
e e e e e e e e f
E
3m 3m 3m 3m 3m 3m 3m
F
G
H
J
CI
3d 3d 3d 3d 3d 3d 3d
3b 3b 3b 3b 3b 3b 3b 3b 3b
1g 1g 1g 1g 1g 1g 1g 1g 1g
1d 1d 1d 1d 1d 1d 1d 1d 1d
17.3 17.0 17.3 17.0 17.0 17.0 24.8 24.8 23.5
Two Hole Flanged Box Extension Adapter
Single Gang Extension Rings
Six Hole Flanged Box Extension Adapter
H Red•Dot ®
IHE4-1
IHEF2 (Add-On)
IHE
Two and Three Gang Boxes
IHEF6S2 (Add-On)
Two Gang Extension Ring
2IH & 3IH
2IHE
Two and Three Gang Boxes Cat. No.
A
B
C
D
E
F
G
H
2IH3 2IH4 2IH5 2IH5S2 2IH7 2IH7S2 2IHD5 3IHD7
4l 4l 4l 4l 4l 4l 4l 4l
4e 4e 4e 4e 4e 4e 4e 6k
2h 2h 2h 2h 2h 2h 2W 2W
e e e e e e f 1i
5 5 5 5 5 5 5 6m
3d 3d 3d 3d 3d 3d 3d 3d
3W 3W 3W 3W 3W 3W 3W 3b
3f 3f 3f 3f 3f 3f 3f 5e
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
J
K
1d 1d 1d 1d 11i 11i
L
M
CI
3b 3b 3b 3b 3b 3b 3b 3b
3l 3l 3l 3l 3l 3l 3l 3l
31.8 31.8 31.8 31.8 30.3 32.0 40.3 54.8
H23
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H24
®
Dry-tite Universal Boxes Single Gang Covers
CCD
CCDV AND CCGV
CCT
CCB
H Red•Dot
®
CCG
CCS
CCSV
CCMB
Typical FS Mount Hole Pattern
Two and Three Gang Covers
2CCSD and 2CCSG
3CCB
2CCT
H24
2CCTD
2CCB
2CCS
2CCD & 2CCG
2CCTS
2CCTG-FS
Typical FS Mount Hole Pattern
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H25
®
Code Keeper
Wet or Dry, All Outlets Can Go Undercover with Code Keeper ®
Code Keeper weatherproof covers are required by the National Electric Code anyplace where water may come in contact with electrical outlets when a plug is in use. Code Keeper covers are also ideal anywhere to prevent accidental disconnects, reduce tampering, and to provide a lockable cover that meets OSHA requirements. ®
®
Suggested Applications:
®
®
®
®
Commercial: for vending machines, car washes, restaurant kitchens.
®
®
®
®
National Electric Code Article: 406.8(B): Industrial: for manufacturing areas, food processing, labs, loading docks.
(1) 15- and 20- Ampere, 125- and 250-volt receptacles installed outdoors in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted.
Recreational: for pools and spas, athletic fields, golf courses.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H25
®
Residential: for holiday and landscape lighting, bug zappers, sprinkler systems.
H Red•Dot
Residential – holiday and landscape lighting, wells and sump pumps, sprinkler systems, plug-in timers, garages, patios. Commercial – vending machines, car washes, outdoor signs, restaurant kitchens, greenhouses and nurseries, marinas, garages, lumberyards. Industrial – manufacturing areas, food processing, water treatment plants, security cameras, laboratories, washdown areas, loading docks. Recreational – pools and spas, parks, playgrounds, zoos, RV connections, athletic fields, ball parks, stadiums, outdoor stages, amphitheaters, golf courses. The electrical code is the reason you need a wet location cover, but the reason to buy Code Keeper covers are simple: aluminum construction; easy installation with instructions in English, Spanish, and French; and a lifetime warranty from a manufacturer that has defined reliability in electrical construction materials for over half of a century. Cover the code with protection that lasts a lifetime with Code Keeper covers. The National Electric Code requires you to cover outdoor or other wet location receptacles any time they are in use to ensure the safety of anyone who may come in contact with them. Code Keeper covers are corrosion-resistant, aluminum wet location covers that meet the requirements of the National Electric Code and are backed by a lifetime warranty. Red•Dot ’s Code Keeper wet location cover is NEMA 3R rated, UL Listed and CSA certified, and meets all the requirements of NEC Article 406.8(b). Code Keeper covers are rugged, corrosion-resistant metal construction that provide long-lasting durability and are not subject to cracking or breaking. Made with the same Red•Dot quality that contractors know and trust, Code Keeper covers offer a lifetime of use and safety.
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H26
®
Code Keeper Wet Location Covers
Single Gang Medium Horizontal
Single Gang Small Vertical
Single Gang Medium Vertical
Single Gang Large Vertical
Two Gang
Applications:
Red•Dot
®
H
• Protects receptacles, switches, and plugs for single gang and two gang configurations in Dry and Wet Locations. • Provides a lockable cover that complies with OSHA lockout/ tagout requirements. • Prevents accidental equipment disconnects, reduces tampering, and deters theft and equipment removal.
Hinge Plate Cover
FS Mount
Features/Benefits: • Alloy A360 copper-free* aluminum provides increased corrosion resistance. • Die cast, metal construction provides long lasting durability. • NEMA 3R rating ensures protection against falling rain, sleet, and external ice formation when used with appropriate device boxes. • Clear UL and CSA markings speed approval by inspectors. • Wide range of cover depths and receptacle configurations accommodate almost every common plug and cord size. • Combination box or device mounting design provides flexibility in installation. • Trilingual instructions help to make installation easy for everyone. Standard Materials:
Device Mount
Padlock Eye for b" Shackle
• Covers and Plates: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Gaskets: Closed-cell foam. Standard Finish: • Aluminum lacquer finish. Compliances: • NEC Article 406.8(B). • UL Listed. • CSA Certified. Sample Specifications: • Code Keeper covers shall comply with NEC Article 406.8(b) and be die cast copper-free* aluminum alloy A360. Covers shall be finished with aluminum lacquer. Red•Dot Catalog No. _______________ ®
*Less than .004 copper content.
H26
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H27
®
Code Keeper Wet Location covers
All 15- and 20-Ampere, 125- and 250-volt receptacles installed outdoors in a wet location must have an enclosure that is weatherproof whether or not the attachment plug is inserted. ®
Code-Keeper is required by the National Electrical Code Article 406.8 (B) for unattended in-use plugs in wet locations. • Die Cast A360 aluminum alloy (less than .004 copper content). • NEMA 3R Rating. • Clear UL and CSA markings. • Wide range of cover depths and receptacle configurations. • Sturdy lockable cover tab compiles with OSHA lockout/tagout requirements. • Combination box or device mount design (for most styles). • Powder coated finish.
H
Two Gang
Single Gang
Cat. No.
Description
Regular Cover 41⁄4" Internal Depth
Small Vertical Cover 21⁄4" Internal Depth Duplex receptacle cover
CKSGV
GFCI receptacle cover
CKSSV
Single (1.438") receptacle cover
Two duplex receptacle cover
2CKD 2CKDG
Medium Horizontal Cover 31⁄4" Internal Depth
®
CKSDV
Description
Red•Dot
Cat. No.
Duplex and GFCI receptacle cover
2CKG
Two GFCI receptacle cover
2CKS
Two single (1.438")receptacle cover
2CKSD
Single (1.438") and duplex receptacle cover
CKMD
Duplex receptacle cover
CKMG
GFCI receptacle cover
2CKSG
CKMS
Single (1.438") receptacle cover
Single (1.438") and GFCI receptacle cover
2CKTD
Toggle and duplex receptacle cover
2CKTG
Toggle and GFCI receptacle cover
2CKTS
Toggle and single (1.438") receptacle cover
Medium Vertical Cover 31⁄4" Internal Depth CKMDV
Duplex receptacle cover
CKMGV
GFCI receptacle cover
2CKTSY
CKMSV
Single (1.438") receptacle cover
Toggle and single (1.745") receptacle cover
2CK1DV*
One duplex vertical receptacle cover
CKMSVL
Single (1.594") receptacle cover
2CK1GV*
One GFCI vertical receptacle cover
2CK1SM*
One single (2.656") receptacle cover, box mount only
2CK1SXL*
One single (2.125") receptacle cover, box mount only
Large Vertical Cover 43⁄4" Internal Depth CKLSVL
Single (1.594") receptacle, cover, box mount only
CKLSVY
Single (1.745") receptacle, cover, box mount only
CKLSVXL
Single (2.125") receptacle, cover, box mount only
2CK1SV*
One single (1.438") receptacle cover
NOTE: Dry-Tite covers packed with gasket and screws. * Can be used to cover one receptacle with an oversized wall opening. ®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H27
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H28
®
Code Keeper Wet Location Covers Single Gang Vertical (Small)
accepts most CKSDV
CKSGV
CKSSV
Medium Vertical Covers
CKMDV
CKMGV
CKMSV
CKMSVL
Red•Dot
®
H Medium Horizontal Covers
CKMD
CKMG
CKMS
Large Vertical Covers
CKLSVL
CKLSVY
CKLSVXL
Two Gang Covers
H28
2CKD
2CKDG
2CKG
2CKS
2CKSG
2CKTD
2CKTG
2CKTS
2CK1DV
2CK1GV
2CK1SM
2CK1SV
2CKSD
2CK1SXL
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H29
Weatherproof Covers – While-In-Use Applications w Ne ucts d Pro
Universal While-In-Use Covers to secure using an external locking device*. Perfect for all outdoor outlets including landscape lighting, lawn equipment, pool/hot tub pumps, and holiday lighting.
T&B’s newest Universal While-In-Use covers keep out moisture and take the hassle and cost out of installation. Single or two-gang kits accommodate up to eight configurations each, and every cover is designed with a method • • • • • • •
Saves You Time – No inserts to slow you down, no labor intensive cutouts. Horizontal or vertical orientation Meets NEC 406.8(B) code requirements Lockable cover design for added security using external locking device High impact UV-resistant polycarbonate base construction Weatherproof, thermoplastic cover with transparent finish Accommodates GFCI, single and duplex receptacles, Toggle switches and single receptacles up to 1.59” diameter • Mounts to a box or the device. All installation screws included. • Great for retrofit applications. Device holes are keyed, so just back out the existing device screws and slip the cover over previously installed screws
H Single Gang Base Options
Universal Nonmetallic While-In-Use Cover Cat. No.
2
3
4* Horizontal
5
6
7
CKNM 2CKNM
Single gang duplex/GFCI/switch/single 1.59 – horizontal or vertical – pad lockable. Two gang duplex/GFCI/switch/single 1.59 – horizontal or vertical – pad lockable.
6 4
®
1
Std. Ctn.
Description
U.L. Listed CSA Certified Cover ships as a vertical GFCI, the industries most commonly used version. * External locking device (such as a padlock) not supplied.
8*
*1.59" diameter fits up to 30 Amp twist lock receptacle.
Two Gang Base Options 5d"
5d"
1
2*
3
4
2f"
4"
4" Single Gang (CKNM)
5**
6**
7
8
*2.125" diameter **1.59" diameter
Fast and Easy Installation. Choose your base plate and secure to the device. Then snap on the lid, and you’re done!
5"
5"
2c"
5"
5"
Two Gang (2CKNM)
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Red•Dot
Vertical
H29
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H30
®
Dry-tite Round Boxes, Extensions & Covers
S-47**
Applications: • Junction for branch conduits. • Spacious, accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices.
Red•Dot
®
H
Features/Benefits: • • • •
Copper-free* aluminum provides increased corrosion resistance. Precision cast and machined surfaces permit safer wire pulling. Clean cover edges provide good gasket sealing. Precision NPT threads allow trouble-free field installation for rigid, IMC or EMT conduit. • Deep slotted stainless steel cover screws for faster installation. • Clear UL and cubic content markings speed approval by inspectors. Standard Materials: • S Boxes - Die cast aluminum alloy A380. • SS-B Cover - Stamped aluminum. • Gaskets: Composition. Standard Finish: • Aluminum lacquer finish. Compliances: • UL Listed. • Federal Spec. W-C-586B. Sample Specifications: • Outlet boxes and covers shall be die cast copper-free* aluminum alloy A380 (“S”). Outlet boxes and covers shall be finished with aluminum lacquer. Outlet boxes and covers shall be Red•Dot Catalog No. _______________
®
*Less than .004 copper content. ** S Boxes - Die cast aluminum alloy A380
H30
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H31
®
Dry-tite Round Boxes, Extensions & Covers Extensions
Boxes Cat. No.
Color
Hub Size
Description
Silver Silver
d" f"
5 outlets, cast mounting lugs, 4 closure plugs
Silver Bronze White Silver Bronze White
d" d" d" f" f" f" d" f"
Cat. No.
Color
Hub Size
Description
Silver Silver
d" f"
4 outlets 4 closure plugs, gasket and screws
Four Outlets, 41⁄8" Diameter
Five Outlets, 41⁄8" Diameter S-47 S-48
SE-47 SE-48
D-PAK * ®
DS-47 DS-47-BR DS-47-WH DS-48 DS-48-BR DS-48-WH DS-47-B DS-48-B
with blank cover with blank cover
Seven Outlets, 41⁄8" Diameter Silver
S-71
d"
7 outlets, cast mounting lugs, 4 closure plugs
H Red•Dot
Round Lampholder Covers
®
Standard Covers
Jumbo Covers
Cat. No.
Color
Hub Size
Description
Silver Silver Silver
d" f" d"
One tapped hole One tapped hole Three tapped holes
Silver Bronze White Silver Bronze White
d" d" d" d" d" d"
One tapped hole One tapped hole One tapped hole Three tapped holes Three tapped holes Three tapped holes
Gasket and Screws, 41⁄8" Diameter S-1-RD S-12 S-3-RD S-1
S-12
Cat. No.
Color
Hub Size
Description
Gasket and Screws, 41⁄2" Diameter SJ-11
Silver
d"
One tapped hole
SJ-21
Silver
d"
Two tapped holes
SJ-31
Silver
d"
Three tapped holes
D-PAK * ®
DSS-1 DSS-1-BR DSS-1-WH DSS-3 DSS-3-BR DSS-3-WH
S-3
ROUND BLANK COVERS Cat. No.
Color
Description
SS-B
Silver
Weatherproof cover with gasket and screws
41⁄8" Diameter
Cat. No.
Color
Description
CCRSB
White
Mounting holes 2f" on center (not Raintight)
CCRB
White
Mounting holes 3d" on center (not Raintight)
5" Diameter
NOTE: Boxes are Raintight when used with appropriate Red•Dot boxes. All covers packed with gasket and screws. * See Pages H48-H50 for complete D-PAK assortment ®
®
D-PAK * ®
DCCRB
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
White
H31
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H32
®
Dry-tite Round Boxes, Extensions & Covers Outlet Boxes, Extensions and Covers
SE-47 SE-48
S-47 S-48
S Series Cat. No.
Red•Dot
®
H
S-47 SE-47 S-71 S-48 SE-48 SS-B S-1 S-12 S-3 SJ-B SJ-11 SJ-21 SJ-31
H32
Hub Size
A
B
C
D
E
F
G
H
CI
d" d" d" f" f"
4a 4a 4a 4a 4a 4a 4a 4a 4a 4d 4d 4d 4d
1e 1e 1e 1e 1e Y 1p c 1h c c 1 1
f 1i f g 1i
5l
4n 4n 4n
3a 3h 3a 3a 3h
1b
5l 5l
3d 3d 3d 3d 3d
17.0 18.3 16.3 17.0 18.3
d" f" d" d" d" d"
1b 1b
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H33
®
Dry-tite Lampholders, Garden Lights & Accessories
L-80
L-80-D
L-800
Applications: • Security and general outdoor lighting fixture for residential and commercial applications. • Accent lighting fixture for highlighting outdoor signs and architectural details. • Compact outdoor lighting fixture which can be mounted easily in most places and can be aimed in any direction.
Heat resistant gasket Porcelain socket Corrosion resistant metal
Features/Benefits:
H Locking arm
®
Standard Materials: • Fixture: Certified die cast zinc alloy ZAMAK 3. • Gasket: Heat resistant composition or high-temperature silicone. • Socket: Center contact, porcelain, medium base. Standard Finish:
Ground screw
• Aluminum lacquer finish. • Chrome plated zinc. Compliances • UL Listed. • Suitable for use in Wet Locations. Sample Specifications: • Lampholders shall be certified die cast zinc alloy ZAMAK 3. Lampholder will have positive locking mounting arm and replaceable socket. Fixture shall be Red•Dot Dry-tite . Catalog No. _______________for use with _______________ watt incandescent lamp. ®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Red•Dot
• Clean lines and precision manufacturing result in a fixture which will enhance any application. • High-quality replaceable porcelain socket with hightemperature leads allow for easy field maintenance. • Positive locking mounting arm keeps fixture in aimed position to reduce costly call-backs. • Ground screw boss in arm.
H33
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H34
®
Dry-tite Lampholders, Garden Lights & Accessories Lampholders, Die Cast Zinc Zamak 3
Decorative Floodlight
Cat. No.
Color
Lamp Max.
Description
L-80
Silver
150W• PAR 38 or R40
Inside gasket and ground screw
Standard
D-PAK * DL-80 DL-80-BR DL-80-WH
Silver Bronze White
L-80-D
Silver
Cat. No.
Color
Lamp Max.
Description
2L80D2
White
150W• PAR 38 or R40
Two lampholders round cover, inside gaskets and ground screws
®
D-PAK * D2L80S3 Silver ®
Portable Spotlights
Gasketed 150W• PAR 38 or R40
Heavy duty slip-on gasket and ground screw
150W • PAR 38 or R40
Cat. No.
Color
Lamp Max.
Description
K702
Silver
150W• PAR 38 or R40
Standard lampholder, ground spike, wall bracket, gasket, and screws
Inside gasket and ground screw
K780
Silver
150W• PAR 38 or R40
Deep-shielded lampholder, ground spike,wall bracket, gasket, and screws
Mounts to L-80 series lampholders
Compact Quartz Fixture
Deep-Shielded L-800
Red•Dot
®
H Wireguard LG-80
Cat. No.
Color
Lamp Max.
Description
HV-250-CFBR
Bronze
250W• Minican T4 quartz
Mighty Light Heavy duty fixture includes mounting plate, wire nuts, and lamp ®
Lampholder Covers
Single Gang Lampholder Covers
LC-11
Cat. No.
Cat. No.
Standard (2m" x 4d") LC-11
Jumbo (3a" x 5a") LF11
Size
d"
LC-21
___
d"
LC-31
LF31
d"
Cat. No.
Color
Size
Round Lampholder Covers Description
One hole Device mount Two hole Device mount Three hole Device mount
Description
S-1, SJ-11, S-12
SJ-21
LC-21
D-PAK * DLC-31
Silver
d"
DLC-31-BR
Bronze
d"
DLC-31-WH
White
d"
®
LC-31
H34
Three hole Device mount Three hole Device mount Three hole Device mount
S-3, SJ-31
Cat. No.
Cat. No.
Size
Description
Standard (4a" diameter) S-1-RD S-12 -S-3-RD
Jumbo (4d" diameter) SJ-11 -SJ-21 SJ-31
d" f" d" d"
One hole One hole Two holes Three holes
Cat. No.
Color
Size
Description
D-PAK * DSS-1 DSS-1-BR DSS-1-WT DSS-3 DSS-3-BR DSS-3-WT
Silver Bronze White Silver Bronze White
d" d" d" d" d" d"
One hole tapped One hole tapped One hole tapped Three tapped holes Three tapped holes Three tapped holes
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H35
®
Dry-tite Lampholders, Garden Lights & Accessories
LC-11
LF-11
LC-31
LF-31
H SS-B SE-47 SE-48
S-3
SJ-B
SJ-11
SJ-21
SJ-31
Red•Dot
S-47 S-48
S-1 S-12
®
Dimensions in Inches Cat. No. S-47 SE-47 S-71 S-48 SE-48 SS-B S-1 S-12 S-3 SJ-B SJ-11 SJ-21 SJ-31
Hub Size
A
B
C
D
E
F
G
H
CI
d" d" d" f" f"
4a 4a 4a 4a 4a 4a 4a 4a 4a 4d 4d 4d 4d
1e 1e 1e 1e 1e 3⁄64 c c 1 c c 1 1
f 1i f g 1i
5l
4n 4n 4n
3a 3h 3a 3a 3h
1b
5l 5l
3d 3d 3d 3d 3d
16.0 18.3 16.0 16.0 18.3
d" f" d" d" d" d"
CCRB
1b 1b
CCRSB
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H35
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H36
®
Dry-tite Lampholders, Garden Lights & Accessories Photometrics Photometrics are strictly a function of the lamp used.
L-80
L-800
Red•Dot
®
H
Mighty Lights
®
*Photometrics: Beam Spread Horizontal & Vertical 89º x 66º
HV-250-CFBR
*Data based on 250 Watt, T-4 quartz lamp rated 4850 lumens and is applicable to HV-250-CFBR fixture.
FOOT CANDLE FORMULA CANDELA LIGHT VALUE IN FOOT CANDLES = DISTANCE2 AT A GIVEN DISTANCE FROM BULB
H36
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H37
®
Dry-tite Lampholders, Garden Lights & Accessories
K330
K440
Applications: • Lighting for walkways, paths or driveways. • Accent lighting for garden and terrace areas. • Ground level security lighting. Features/Benefits: • Certified zinc alloy provides increased corrosion resistance. • High quality replaceable porcelain socket with high temperature leads allows for easy field maintenance.
H Red•Dot
Standard Materials:
®
• Fixture: Die cast zinc alloy ZAMAK 3. • Globe: Lime crystal glass. • Socket: Center contact, porcelain, medium base. Standard Finish: • Green aluminum lacquer finish. • Bronze aluminum lacquer finish. Compliances: • UL Listed. • Suitable for use in Wet Locations. Sample Specifications: • Fixture shall be certified die cast zinc alloy ZAMAK 3. Socket shall be porcelain, center contact and replaceable. Socket shall have extended leads for easy wiring. Fixture shall be Red•Dot Dry-tite Catalog No. _______________ ®
®
®
Dry-tite Garden Lights
Three Tier Cat. No. K330 K330BR
Four Tier Color Silver Bronze
Lamp Max. 75W•
Description 12" extended leads, gasket and ground screw
Cat. No. K440 K440BR
Color Silver Bronze
Lamp Max. 100W•
Description 12" extended leads, gasket and ground screw
• Lamp not included * See Pages H48-H50 for complete D-PAK assortment ®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H37
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H38
®
Dry-tite Lampholders, Garden Lights & Accessories Garden Lights
K330
Red•Dot
®
H
K440
Photometrics: Based on lamp center 24" above ground
Based on 100 Watt A-19 inside frosted 1750 lumen lamp. For other wattage see table below. Wattage 100 75 60 50 40 25
Multiplier 1.0 .68 .44 .27 .26 .13
Iso Foot Candles
H38
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H39
®
SiteLight Overview ®
Step up to SiteLight Line Voltage Outdoor Lighting
Planning your Outdoor Lighting
We’ve Made Installation Easy Everything you need is included in the SiteLight Kit except a bulb, supply cable and tools (screwdriver, wire strippers, etc.). Only three connections are required to wire each fixture to the supply cable. With SiteLight’s PVC in-ground mounting tube, there is no need to pour concrete to secure the fixtures. Just position the tube and pack ®
Grazing from side or bottom to show texture
Uplighting from below makes details stand out
Silhouetting from behind provides drama
For decks, Post Sconce Lights mounted on deck posts provide glare-free perimeter lighting and mid-stair lighting. Post Top Lights are ideal for lighting stairs and rails. Use SiteLight Path Lights and Swivel Lights for pathways, driveways and general garden lighting. The chart below will help you determine fixture spacing. Bright & Even
Medium Dappled
Soft Mood
8' - 10'
12' - 18'
Over 20'
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
SiteLight Meets Every Outdoor Lighting Need • From soft, indirect deck lighting to brilliant, focused spot lighting, use SiteLight to beautify any property while enhancing safety and security. • Lighting for walkways, pathways, and driveways. • Stairway, perimeter, and task lighting for decks. • Accent and ambient lighting for pool/patio and garden areas. • Highlighting to emphasize landscape details or specific objects. • Ground level safety/security lighting to illuminate dark areas.
dirt around it. Attach your SiteLight to the mounting tube and your installation is complete. Even tapping a power source is easy when you use SiteLight’s Outside Outlet Power Hook-Up Kit (K800). SiteLights are designed for a lifetime of trouble free use. SiteLight is high quality, permanent lighting built to add value and beauty to your home.
H39
H
®
Compare SiteLight to Low Voltage Sets • SiteLight is up to 5 times brighter than low voltage - more light with fewer fixtures than with low voltage sets. • SiteLight gives you flexibility in spacing, the number of fixtures, and the length of run. Light where you need it. Low voltage sets have
a fixed limit on length of run and the number of fixtures. • SiteLight uses regular household current - no expensive low voltage transformer to purchase or replace. • SiteLight uses readily available, standard bulbs. Low voltage bulbs are often found only where sets are sold. • SiteLight lets you add on fixtures by tapping into run. Low voltage sets will generate even less light if transformers are at capacity. SiteLights are permanent, all metal fixtures guaranteed for a lifetime.
Red•Dot
On graph paper outline your home and grounds. Indicate key features you wish to highlight such as stairways, statuary, shrubbery or flowering plants. SiteLight Spot Lights and Swivel Lights provide focused illumination to showcase these areas. The diagrams below show how you can achieve 3 special lighting effects with SiteLight Spot Lights and Swivel Lights.
For outdoor lighting, nothing compares to the full power (120V) and beauty of SiteLight. SiteLight uses regular household voltage and standard bulbs that are readily available. There are no expensive transformers to purchase or replace. With SiteLight, you can add fixtures when and where you want them and still enjoy lighting that is up to five times brighter than low voltage. Use SiteLight to highlight gardens, statuary, shrubbery and to effectively light decks, stairs, pathways, pools and driveways. SiteLight meets every outdoor lighting need... from soft, indirect deck lighting to brilliant, focused spot lighting. Use SiteLight to beautify your property while enhancing safety and security. Step up to SiteLight line voltage outdoor lighting and add permanent value to your home.
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H40
®
SiteLight Lampholders, Garden Lights & Accessories
K811BR
K822BR
K841BR
K861BR
Applications: • Lighting for walkways, pathways, and driveways. • Stairway, perimeter, and task lighting for decks. • Accent and ambient lighting for pool/patio and garden areas. • Highlighting to emphasize landscape details or specific objects. • Ground level safety/security lighting to illuminate dark areas.
Red•Dot
®
H
Features/Benefits: • Copper-free* aluminum construction provides increased corrosion resistance. • Sturdy die cast aluminum construction provides durability. • Architectural bronze color blends into landscape and deck areas. • High quality, replaceable porcelain socket with brass screw shell (except K851BR, K852BR). • Aluminum mounting tube cap houses and protects wire connection (ground installed fixtures). • PVC ground tube provides an innovative installation method saving costly labor and traditional installation materials (ground installed fixtures). • Wire connectors and ground wire allow safe, easy power connections. • Tempered glass lens and silicon gaskets keep socket dry (K831BR, K841BR, K861BR). • Positive locking arm can be adjusted to the desired position (K831BR, K841BR, K861BR). • Fixtures use regular household voltage (120V) and standard indoor bulbs. Standard Materials: • Fixture: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Lens: Tempered glass (K831BR, K841BR, K861BR). • Lens: Polycarbonate (K811BR, K812BR, K821BR, K822BR, K851BR). • Socket: Porcelain, center contact, brass screw shell, medium base (K811BR, K812BR, K821BR, K822BR, K831BR, K841BR, K861BR), molded plastic socket with candelabra base (K851BR and K852BR). • Mounting Tube: Gray PVC, schedule 40 (ground installed fixtures). Standard Finish: • Bronze aluminum lacquer finish.
K851BR
K852BR
Quality Construction
Rustproof cast aluminum Top removes easily for bulb replacement
Shatterproof Lens
Porcelain Socket with brass screw shell
Architectural Bronze color blends into landscape
Aluminum Base for durability
Stainless Steel Screws
Aluminum Mounting Tube Cap houses wire connections
Wire Connectors and Ground Wire for safe, easy power connections 13" PVC Mounting Tube provides a permanent base for fixture and large opening to feed wires
Compliances: • UL Listed. • Suitable for use in Wet Locations. • Ground mounting (suitable for use 4' or less above grade level) except K852BR and K861BR. Sample Specifications: • Fixture shall be die cast copper-free* aluminum alloy A360, with bronze aluminum laquer finish. Sockets shall be porcelain, center contact, brass screw shell-medium base for K811BR, K812BR, K821BR, K822BR, K831BR, K841BR and K861BR fixtures. Sockets shall be molded plastic with candelabra screw base for K851BR and K852BR fixtures. All sockets shall have extended leads for easy wiring. *Less than .004 copper content.
H40
Easy to Install: • Only 3 wire connections per fixture are required. • No need to pour concrete. • All connections are made above ground.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H41
®
SiteLight Lampholders, Garden Lights & Accessories
Distance in inches of mounting height
10.8
10
5
ISO Foot Candles Values based on .45 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp.
2
10 5.4 10 20
0 1
7.5" Path Light Cat. No.
Description
Lamp Required
Spacing
.5
7.5" Path Light with 13" x 2" schedule 40 PVC mounting tube
K811BR
5.4 10.8
A15 40W(max) / 120V medium base
16.2
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
21.6 0
5.4
10.8 16.2 21.6 27 32.4 Distance in inches of mounting height
37.8
7.5" Path Light
K811BR
16.08
5
2
1
Distance in inches of mounting height
5
8.04 5 10
ISO Foot Candles Values based on .67 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp.
0
10" Path Light Cat. No.
Description
Lamp Required
Spacing
.5
K812BR
8.04 16.08
10" Path Light with 13" x 2" schedule 40 PVC mounting tube
A15 40W(max) / 120V medium base
24.12
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
36.16 0
8.04
H
16.08 24.12 32.16 40.2 48.24 Distance in inches of mounting height
10.8
5
2
Distance in inches of mounting height
ISO Foot Candles Values based on .45 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp.
0 1
7.5" Dome Path Light Cat. No.
Description
®
10 10
5.4 10
Red•Dot
10" Path Light
K812BR
Lamp Required
Spacing
.5
K821BR
5.4 10.8
7.5" Path Light with 13" x 2" schedule 40 PVC mounting tube
A15 40W(max) / 120V medium base
16.2
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
21.6 0
5.4
10.8 16.2 21.6 27 32.4 Distance in inches of mounting height
37.8
7.5" Dome Path Light
K821BR
16.08
2
5
1
Distance in inches of mounting height
5
8.04 0
5 5
ISO Foot Candles Values based on .67 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp. .5
10" Dome Path Light Cat. No.
Description
Lamp Required
Spacing
.2
K822BR
8.04 16.08
7.5" Path Light with 13" x 2" schedule 40 PVC mounting tube
A15 40W(max) / 120V medium base
24.12
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
36.16 0
8.04
16.08 24.12 32.16 40.2 48.24 Distance in inches of mounting height
56.28
10" Dome Path Light
K822BR
ISO Foot Candles Values based on 3 ft. setback from a vertical wall and a 100 Watt incandescent 1321 lumen lamp.
Distance in inches of mounting height
216 .02
.05
180 .1
144
Ground Spot Light Cat. No.
Description
Lamp Required
Spacing
.2
K841BR 108
.5 1
Ground Spot Light with 13" x 2" schedule 40 PVC mounting tube
72 2
One to two for each object to be highlighted or as required for special lighting effects.
.002
5
36
R20 100W(max) / 120V medium base
.005
10 .01
0 0
K841BR
36
72 108 144 180 216 Distance in inches of mounting height
Ground Spot Light
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H41
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H42
®
SiteLight Lampholders, Garden Lights & Accessories ISO Foot Candles Values based on 1ft. mounting height and a 60 Watt A15 incandescent 740 lumen lamp tilted 45˚ degrees.
24 Distance in inches of mounting height
.2
2
.5
12 1 20
Description
Lamp Required
Spacing
0 50
K831BR
12
10 5
.5
24
17.5" Swivel Light with 13" x 2" schedule 40 PVC mounting tube
General lighting: A15 60W(max) / 120V medium base Spot lighting: R16 60W(max) / 120V medium base
1
36 .01
.2 .05
.1
.02
48 0
12
24 36 48 60 72 Distance in inches of mounting height
84
General lighting: 8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood. Spot lighting: one to two for each object to be highlighted
17.5" Swivel Light
K831BR
ISO Foot Candles Values based on 1ft. mounting height from light opening of luminaire to ground stair and a 10 Watt G121/2 80 lumen lamp on lens 1ft. above ground or stair.
Distance in inches of mounting height
24 .002.005
H
17.5" Swivel Light Cat. No.
12
.2 .5
0
K851BR
2
5
Post Sconce Light Cat. No.
12 1
Description
Lamp Required
Post Sconce Light with metal back plate, and mounting hardware
Spacing
G12d 10W(max) / 120V candelabra base
On each post or every other post, depending on desired brightness. Mounts to standard 4X4 post.
.05
.1
.001
.02 .01
24
.005
36 .002 .001
48
12
24 36 48 60 72 Distance in inches of mounting height
84
Post Sconce Light
K851BR
ISO Foot Candles Values based on 4 ft. mounting height from center of light opening to base of deck and a 15 Watt G161/2 100 lumen lamp.
Distance in inches of mounting height
96 .05
48
Post Top Light Cat. No.
Description
Lamp Required
Spacing
0
48
.05 .02
96
K852BR
.05 .05
.05
Post Top Light with metal back plate, and mounting hardware
G16d 15W(max) / 120V candelabra base
On each post or every other post, depending on desired brightness. Mounts to standard 4X4 post.
.02 .01 .005
144 .002 .001
.0005 .0002
192 .0001 0 48
96 144 192 Distance in inches of mounting height
Post Top Light
K852BR
192
ISO Foot Candles Values based on 8 ft. mounting height and a 100 Watt 1321 lumen lamp tilted 45˚ degrees.
.05
.02
.2
Distance in inches of mounting height
Red•Dot
®
0
96 .1
0
96
.5 .1
K861BR
.1
192
.05
Description Wall Spot with cover, (box not included)
Lamp Required
Spacing
R20 100W(max) / 120V medium base
One to two on most average size decks or exterior walls.
.02
288
.01 .001
.002
384 .0005 96
K861BR
Wall Spot Cat. No.
.005
192 288 384 480 576 Distance in inches of mounting height
672
Wall Spot
Outside Outlet Power Hook-up Kit
H42
Cat. No.
Finish
K800
Silver
Description Outside Outlet Power Hook-up Kit with ground wire, ground screw and five close-up plugs
Hub Size f”
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
No. of Outlets Top Bottom Side Side
2 2 1 1
Total
6
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H43
®
Site-light Lampholders, Garden Lights & Accessories K811BR
Zonal Lumen Summary
5b" 3a"
5b"
Zone Deg 1b" 2j"
1h"
d
7"
7d"
Lumens
3.6 6.2 17.1 80.7 17.4 18.3 19.3 19.3 100.0
Total Luminaire Efficiency = 37.4%
0 2 3 4 5 11 28 33 34 21 3 2 1 1 1 0 0 0 -
ISO Foot Candles Values based on .45 (5.4") foot mounting height and a 40 watt A15 clear 400 lumen lamp (10.8")
10
5
2
10 10
(5.4") 20
0
1
.5
H
(5.4")
(10.8")
(16.2")
®
4 4 6 7 6 7 11 30 31 32 30 24 3 2 2 1 1 0 0 0 0
1.4 2.3 6.4 30.2 6.5 6.8 7.2 7.2 37.4
Red•Dot
Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
% of total output
5 9 26 121 26 27 29 29 150
Distance in Units of Mounting Height
13a"(±b)
Deg
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens
% of lamp output based on 400 lumens
(21.6") (5.4")
(10.8")
(16.2")
(21.6")
(27")
(32.4")
(37.8")
Distance in Units of Mounting Height
K812BR
5b" 3a"
5b"
Zonal Lumen Summary 1b" 2j"
Zone Deg
1h" 10" 10"
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens
% of lamp output based on 400 lumens
% of total output
1.4 2.3 6.4 30.2 6.5 6.8 7.2 7.2 37.4
3.6 6.2 17.1 80.7 17.4 18.3 19.3 19.3 100.0
5 9 26 121 26 27 29 29 150
Total Luminaire Efficiency = 37.4% Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
4 4 6 7 6 7 11 30 31 32 30 24 3 2 2 1 1 0 0 0 0
ISO Foot Candles Values based on .67 (8.04") foot mounting height and a 40 watt A15 clear 400 lumen lamp
Lumens 0 2 3 4 5 11 28 33 34 21 3 2 1 1 1 0 0 0 -
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
(16.08")
Distance in Units of Mounting Height
13a"(±b)
Deg
5
2
1
5 5
(8.04") 10
0
.5
(8.04")
(16.08")
(24.12")
(36.16") (8.04") (16.08") (24.12") (36.16") (40.2") (48.24")
Distance in Units of Mounting Height
www.tnb.com
H43
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H44
®
SiteLight Lampholders, Garden Lights & Accessories 4l" 3a"
K821BR
Zonal Lumen Summary % of lamp output based on 400 lumens
4b"
Zone Deg
1 2j" 1h"
7d"
7d"
®
Red•Dot
Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
2 2 3 4 4 6 10 29 31 31 22 3 1 1 0 0 0 0 0 0 0
K822BR
Lumens
% of total output
0.7 1.3 4.8 27.8 1.5 1.6 1.6 1.6 29.4
2.4 4.5 16.3 94.6 5.2 5.4 5.4 5.4 100.0
Total Luminaire Efficiency = 29.4%
0 1 2 2 4 10 27 32 33 4 1 1 0 0 0 0 0 0 -
ISO Foot Candles Values based on .45 (5.4") foot mounting height and a 40 watt A15 clear 400 lumen lamp 10
(10.8")
5
2
10
(5.4")
10
1
0
.5
(5.4")
(10.8")
(16.2")
(21.6") (5.4")
(10.8")
(16.2")
(21.6")
(27")
(32.4")
(37.8")
Distance in Units of Mounting Height
4l"
Zonal Lumen Summary
3a"
4b"
3 5 19 111 6 6 6 6 118
Distance in Units of Mounting Height
H
13a"(±b)
Deg
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens
% of lamp output based on 400 lumens
1
Zone Deg
2j" 1h" 10"
10"
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens 3 5 19 111 6 6 6 6 118
% of total output
0.7 1.3 4.8 27.8 1.5 1.6 1.6 1.6 29.4
2.4 4.5 16.3 94.6 5.2 5.4 5.4 5.4 100.0
Total Luminaire Efficiency = 29.4%
H44
Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
2 2 3 4 4 6 10 29 31 31 22 3 1 1 0 0 0 0 0 0 0
Lumens 0 1 2 2 4 10 27 32 33 4 1 1 0 0 0 0 0 0 -
ISO Foot Candles Values based on .67 (8.04") foot mounting height and a 40 watt A15 clear 400 lumen lamp (16.08")
Distance in Units of Mounting Height
13a"(±b)
Deg
5
2
1
5
(8.04") 5 5
0
.5
.2
(8.04")
(16.08")
(24.12")
(36.16") (8.04") (16.08") (24.12") (32.16") (40.2") (48.24") (56.28")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H45
®
SiteLight Lampholders, Garden Lights & Accessories K831BR
5"
General Lighting Zonal Lumen Summary
3a" 2d"
Zone Deg
Lumens
% of lamp output based on 740 lumens
0-30 0-40 0-60 0-90 90-180 0-180
65 105 134 137 0 137
8.7 14.2 18.1 18.5 0.0 18.5
3a" Dia.
5"
1d"
14e"
ISO Foot Candles Values based on 1 (12") foot mounting height and a 60 watt A15 incandescent 740 lumen lamp tilted 45°
2 j" 1
79 81 82 73 67 33 4 3 0 0 0
(24")
8 23 34 41 25 3 3 0 0 -
.2
13a"(±b)
2
.5
1
(12")
20
0
H
50
(12")
10 5 .5
(24")
1
(36")
.01
.2
®
Distance in Units of Mounting Height
3h" Dia.
Lumens
Red•Dot
Candela
0 5 15 25 35 45 55 65 75 85 90
47.2 77.0 97.7 100.0 0.0 100.0
Total Luminaire Efficiency = 18.5%
b"
Deg
% of total output
.05
.1
.02
(48")
(12")
(24")
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
Spot Lighting Zonal Lumen Summary
3a"
Zone Deg
5"
d"
Lumens
% of lamp output based on 299 lumens
% of total output
39 68 111 116 0 116
12.9 22.8 37.2 38.7 0.0 38.7
33.5 58.9 96.2 100.0 0.0 100.0
0-30 0-40 0-60 0-90 90-180 0-180
Total Luminaire Efficiency = 38.7% ISO Foot Candles Values based on 1 (12") foot mounting height and a 40 watt R16 incandescent 299 lumen lamp tilted 45°
b" 2 j" 1
Candela
0 5 15 25 35 45 55 65 75 85 90
45 45 45 47 47 38 16 4 0 0 0
(24")
Lumens Distance in Units of Mounting Height
Deg
4 13 22 29 29 14 4 0 0 -
(12")
.2
.510 2
20 1
0
(12") 5
(24") 1 .1
.5
(36") .2
(48")
.005 .01 .02
(12")
.05
(24")
.1
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H45
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H46
®
SiteLight Lampholders, Garden Lights & Accessories Zonal Lumen Summary K841BR
Zone Deg
Lumens
% of lamp output based on 1321 lumens
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
104 165 214 219 0 0 0 0 219
7.9 12.5 16.2 16.6 0.0 0.0 0.0 0.0 16.6
3a" 3a" Dia.
5e"
6e" l" 3f"
% of total output 47.7 75.3 97.7 100.0 0.0 0.0 0.0 0.0 100.0
b"
Total Luminaire Efficiency = 16.6%
3h" Dia.
1i"
ISO Foot Candles Values based on 3 (36") foot setback from a vertical wall and a 100 watt incandescent 1321 lumen lamp
2 j" 1
Candela Distribution Horizontal Degrees 0.0 45.0 90.0 135.0 180.0 FLUX 136 132 124 121 77 12 6 1 0 0 0
136 133 125 117 106 35 9 4 0 0 0
136 136 128 126 125 93 14 6 2 0 0
136 138 131 122 122 109 31 8 3 1 1
(216")
13 36 56 61 37 11 4 1 0 -
Red•Dot
®
H
136 132 127 124 58 9 5 0 0 0 0
Distance in Units of Mounting Height
Vertical Degrees
13a"(±b)
0 5 15 25 35 45 55 65 75 85 90
Legend 0-deg: 90-deg: 180-deg:
Note: This iso footcandle diagram was produced by tilting the photometric data for this luminaire 45• above horizontal
.02
.05
(180") .1
(144")
.2
(108")
.5 1
(72") 2 5
(36")
10
0
.01
(36")
(72")
.005 .002
(108")
(144")
(180")
(216")
Distance in Units of Mounting Height
K851BR Zonal Lumen Summary 3c"
37°
3b"
Zone Deg 1c" 3c"
3c"
Lumens
0-30 0-40 0-60 0-90 90-180 0-180
% of lamp output based on 80 lumens
% of total output
4.5 7.7 11.0 11.6 0.0 11.6
38.7 66.3 94.3 100.0 0.0 100.0
4 6 9 9 0 9
1l"
Total Luminaire Efficiency = 11.6%
0°
ISO Foot Candles Values based on 1 (12") foot mounting height from light opening of luminaire to ground stair and a 10 watt G12 80 lumen lamp on lens 1 foot above ground or stair
0 5 15 25 35 45 55 65 75 85 90
5 6 6 7 7 6 0 0 0 0 0
5 6 6 7 7 5 1 0 0 0 0
5 6 6 6 6 3 1 0 0 0 0
5 5 2 1 1 1 1 0 0 0 0
5 3 0 0 0 0 0 0 0 0 0
d
0 1 2 3 2 1 0 0 0 -
(24")
Legend 0-deg: 90-deg: 180-deg:
Distance in Units of Mounting Height
Vertical Degrees
Candela Distribution Horizontal Degrees 0.0 45.0 90.0 135.0 180.0 FLUX
.002 .005
(12")
.2 .5
0 5
(12")
1 .1
(24")
2
.05 .001 .02 .01 .005
(36") .002
(48")
.001
(12")
(24")
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
H46
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H47
®
SiteLight Lampholders, Garden Lights & Accessories K852BR
Zonal Lumen Summary 5a" Dia.
Zone Deg
Lumens
% of lamp output based on 100 lumens
0-30 0-40 0-60 0-90 90-180 0-180
1 1 5 10 0 10
0.9 1.3 5.5 10.4 0.0 10.4
5"
e"
4c"
4c"
1b"
3c" SQ.
% of total output 8.7 12.8 52.7 100.0 0.0 100.0
Total Luminaire Efficiency = 10.4% ISO Foot Candles Values based on 4 (48") foot mounting height from center of light opening to base of deck and a 15 watt G16d 100 lumen lamp
0 5 15 25 35 45 55 65 75 85 90
1 2 1 1 1 1 5 6 0 0 0
1 1 1 1 1 1 3 5 0 0 0
1 1 1 1 1 1 3 5 0 0 0
1 1 1 1 1 1 4 5 0 0 0
1 1 1 1 1 1 6 7 0 0 0
0 0 0 0 1 4 5 0 0 -
(96") .2 .05
Distance in Units of Mounting Height
Vertical Degrees
Candela Distribution Horizontal Degrees 0.0 22.5 45.0 67.5 90.0 FLUX
0 .05 .05
H
.02
(48")
.05
.05
(96")
.02 .01 .005 .002 .001 .0005
(144")
Red•Dot
.0
.0002 .0001
(192")
®
Legend 0-deg: 45-deg: 90-deg:
(48")
(48")
(96")
(144")
(192")
Distance in Units of Mounting Height
K861BR
Zonal Lumen Summary
3a" 5k"
Lumens
% of lamp output based on 1321 lumens
% of total output
103 177 301 317 0 317
7.8 13.4 22.8 24.0 0.0 24.0
32.4 56.0 94.9 100.0 0.0 100.0
2d"
Zone Deg 3 / " Dia. 4
8
5k"
3a" Dia.
l"
0-30 0-40 0-60 0-90 90-180 0-180
Total Luminaire Efficiency = 24.0%
b" 2n"
0 5 15 25 35 45 55 65 75 85 90
Candela 128 128 123 120 119 109 44 11 5 0 0
ISO Foot Candles Values based on 8 (96") foot mounting height and a 100 watt 1321 lumen lamp tilted 45°
Lumens 12 35 56 75 83 41 11 5 0 -
(192") .2
Distance in Units of Mounting Height
Deg
.05 .02 .2
(96") 1
0
(96")
.5 .1 .1
(192")
.05 .02
(288")
.01 .001
(384") .0005
.005
.002
(96")
(192")
(288")
(384")
(480")
(576")
(672")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H47
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H48
®
D-Pak Merchandising System
DALB
DIH3-1-LM
DCCD
D2L80S3
Applications: • Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in Dry, Damp and Wet Locations. • Junction for branch conduits. -“A” Series bodies for Rigid and Intermediate Metal Conduit (IMC) conduit maintain a weather resistant conduit system when used with covers and gaskets. -“B” Series bodies for thin wall conduit Electrical Metallic Tubing (EMT) saves cost of connector and labor in indoor applications. • Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices. ®
Red•Dot
®
H
Features/Benefits: • Combination packaging of conduit body, cover and gasket reduces handling and inventory costs. • Selection of colored finishes - silver, bronze and white - match most widely used finishes in commercial and residential construction. • Reduced quantities in easy-to-store cartons. Saves labor and handling, reduces error and handling costs. • Bar coding on carton and product. • See-through wrapper provides instant identification and protects product on job site. • Easy to read labels speeds selection, handling and storage.
Easy to read descriptive labels
Label shows actual product color
Labor saving 2 piece carton
Combination pack of conduit body, cover & gasket
Choice of silver, bronze or white finish
Protective see-through shrink wrap
Standard Materials: • Refer to appropriate section in this catalog. Standard Finish: • Aluminum lacquer finish. • Colors - Silver, Bronze & White. Compliances: • UL Listed. • CSA Certified. • Federal Spec. W-C-586.
H48
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H49
®
D-Pak Merchandising System ®
The D-PAK Merchandising System attracts attention with bold graphics and encourages self-service with clean, easy-to-read labels. • Bold red, black, and white descriptive merchandising labels. • Labor saving 2-piece carton. • Combination pack of conduit body, cover and gasket. • Choice of finish: silver, bronze or white. • English, Spanish, and French instructions. • Protective see-through wrap.
Boxes Single Gang - with mounting lugs, two plugs and ground screw
Cat. No.
Hub Size
Color
Outlets
DIH3-1-LM DIH3-1-LM-BR DIH3-1-LM-WH DIH3-2-LM DIH3-3-LM
d" d" d" f" 1"
Silver Bronze White Silver Silver
Top 1 Bottom 1 Back 1 Total 3
DIH4-2-LM DIH4-1-LM-BR DIH4-1-LM-WH DIH4-2-LM
d" d" d" f"
Silver Bronze White Silver
Top 2 Bottom 1 Back 1 Total 4
DIH5-1-LM DIH5-2-LM
d" f"
Silver Silver
Top 2 Bottom 2 Back 1 Total 5
Three Outlets
Conduit Bodies with Covers and Gaskets Cat. No.
Rigid IMC
EMT
Hub Size
Through Feed Four Outlets d" f" 1"
Back Opening DALB-1-CG DALB-2-CG DALB-3-CG DALB-4-CG DALB-5-CG DALB-6-CG
DBLB-1-C• DBLB-2-C• DBLB-3-C•
d" f" 1" 1b" 1d" 2"
Five Outlets
Left Side Opening DALL-1-CG DALL-2-CG DALL-3-CG
d" f" 1"
Two Gang - with mounting lugs, two plugs and ground screw Three Outlets D2IH3-1
d"
Silver
Right Side Opening DALR-1-CG DALR-2-CG DALR-3-CG
d" f" 1"
Top 1 Bottom 1 Back 1 Total 3
Round - with cast mounting lugs, four plugs and ground screw Five Outlets T-Style DAT-1-CG DAT-2-CG DAT-3-CG
d" f" 1"
DS-47 DS-47-BR DS-47-WH DS-48 DS-48-BR DS-48-WH
Service Entrance Bodies Cat. No.
d" d" d" f" f" f"
Silver Bronze White Silver Bronze White
Side 4 Bottom 1
Total 5 Hub Size • Body and cover only
Back Opening DASLB-1 DASLB-2 DASLB-3
d" f" 1"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H49
®
(Raintight) DAC-1-CG DAC-2-CG DAC-3-CG
H Red•Dot
Cat. No.
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H50
®
D-Pak Merchandising System Device Covers
Lampholders Cat. No.
Color
Description
Duplex receptacle cover, horizontal DCCD Silver DCCD-BR Bronze DCCD-WH White
Device mount
Duplex receptacle cover, vertical DCCDV DCCDV-BR DCCDV-WH
Silver Bronze White
Device mount
GFCI receptacle cover, horizontal. DCCG DCCG-BR DCCD-WH
Silver Bronze White
Device mount
®
Color
Description
DL-80 DL-80-BR DL-80-WH
Silver Bronze White
Inside gasket and ground screw, 150W PAR 38 max. lamp
D2L80S3
Silver
Two lampholders and cover with three d" holes, gasket, screws and plug
Standard
Floodlight
Lampholder Cover
H Red•Dot
Cat. No.
Cat. No. GFCI receptacle cover, vertical DCCGV DCCGV-BR DCCGV-WH
Hub Size
Color
Description
DLC-31 DLC-31-BR DLC-31-WH
d" d" d"
Silver Bronze White
Three d" holes. Supplied with gasket, screws and plug
DSS-1 DSS-1-BR DSS-1-WH DSS-3 DSS-3-BR DSS-3-WH
d" d" d" d" d" d"
Silver Bronze White Silver Bronze White
Single Gang Silver Bronze White
Device mount
Round
Blank Covers Cat. No.
Color
Description
DCCB DCCB-BR DCCB-WH
Silver Bronze White
Device mount
Single Gang
Device mount with gasket, screws and plug
Plugs Cat. No.
Two Gang D2CCB
Silver
Device mount
DCCRB
White
5" round cover with mounting holes 3d" on center (not Raintight)
DPLG-1 DPLG-1-BR DPLG-1-WH DPLG-2
Hub Size
Color
d" d" d" f"
Silver Bronze White Silver
Round
H50
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H51
Kits Kits Cat. No.
Description
Color
CS212 CS212BR CS212WH
Traditional 2 Lamp Round Box Kit
Silver Bronze White
CS228 CS228BR CS228WH
Contemporary 2 Lamp Round Box Kit
Silver Bronze White
CS312 CS312BR CS312WH
Duplex Weatherproof Outlet Device Kit
Silver Bronze White
CS212
H Silver
CS780BR
Contemporary Stake Light w/Cord
Bronze
CS902 CS902BR CS902WH
Traditional 2 Lamp, Round Box w/Photocell Kit
Silver Bronze White
®
GFCI Weatherproof Outlet Device Kit
Red•Dot
CS315
CS228
CS312
CS315
CS780BR
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
CS902
www.tnb.com
H51
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H52
An open and shut case
for meeting the “while-in-use” NEC Code requirement! Need to comply with the new 2002 NEC Code 406.8(B) for weatherproof in-use covers?* No problem! Thomas & Betts has the exact covers you need for compliance, with the brand names you know and trust, Red•Dot and Steel City. • Available in both rugged die-cast aluminum or non-metallic with clear Lexan lids • All feature single-unit convenience for faster, easier installation — no confusing, time-consuming punch-outs • Full range — single gang or double gang • Unique key-lock option Available now from your Thomas & Betts Distributor. ®
Red •Dot
®
Die-cast aluminum, 100% copper-free with integral locking tab.
®
®
Steel City
®
Non-metallic with clear cover. Unique lip design provides water-tight seal. * NEC, Section 406.8(B) (1) 15- and 20-Ampere, 125- and 250-volt receptacles installed outdoors in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted.
Ask your Thomas & Betts sales rep for your free copy of the Thomas & Betts Code Changes 2002.
Steel City • Red•Dot • Superstrut • Union • Bowers ®
®
®
®
®
5/8/03
9:54 AM
Page H1
Conduit Bodies, Covers and Gaskets. . . . . H2-H5 Mogul Pulling Elbow/Service Entrance Bodies. . . . . . . . . . . . . . . . . . . H6-H8 Zinc Concrete Slab Inserts, Elbows and Plugs . . . . . . . . . . . . . . . . . H9-H11 Industrial Vaportight Lighting . . . . . . . . . H12-H16 Cross Reference . . . . . . . . . . . . . . . . . . . . . . H17 Dry-tite Universal Boxes . . . . H18-H20, H23-H24 ®
Dry-tite Single Gang Covers . . . . . . . . . . . . . H21 ®
Dry-tite Two Gang Covers . . . . . . . . . . . . . . H22 ®
Code Keeper . . . . . . . . . . . . . . . . . . . . . . . . H25 ®
Code-Keeper Wet Location Covers . . . . H26-H28 ®
Weatherproof Covers – While-In-Use Applications. . . . . . . . . . . . . . H29 Dry-tite Round Boxes, Extensions and Covers. . . . . . . . . . . . . . . . . . . . . H30-H32 ®
Dry-tite Lampholders, Garden Lights and Accessories . . . . . . . . . . . . . . . . . H33-H38 ®
SiteLight Overview . . . . . . . . . . . . . . . . . . . . H39 ®
SiteLight Lampholders, Garden Lights and Accessories . . . . . . . . . . . . H40-H47 ®
D-Pak Merchandising System . . . . . . . . H48-H50 ®
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H51
H
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H2
Conduit Bodies, Covers & Gaskets
ALB
ALL
BT
Applications: • Junction for branch conduits - “A” Series bodies for Rigid and IMC conduit maintain a weather resistant conduit system when used with covers and gaskets. - “B” Series bodies for thin wall conduit (EMT) saves cost of connector and labor in indoor applications. • Spacious, accessible wiring chamber provides a convenient location to pull conductors and make splices. • Aluminum conduit bodies can be used with steel rigid conduit NEC 346-1, and Steel EMT, NEC 348-1.
Red•Dot
®
H
Features/Benefits: • • • •
Copper-free* aluminum provides increased corrosion resistance. Precision cast and machined surfaces permit safer wire pulling. Clean cover edges provide good gasket sealing. Precision NPT threaded and set screw hubs allow trouble-free field installation for rigid, IMC or EMT conduit. • Retained deep slotted stainless steel cover screws for faster installation. • Clear UL, CSA and cubic content markings speed approval by inspectors.
Clean cover edges
Copper-free aluminum
Smooth conduit stops
Standard Materials: • Conduit Bodies: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Covers: (CV Series) Die cast aluminum alloy A360 with less than .004 copper content (copper-free), and stainless steel screws. • Covers: (SCV Series) Stamped aluminum alloy with less than .004 copper content (copper-free), and stainless steel screws. • Gaskets: (GKN Series) Neoprene. • Gaskets: (GKV Series) Composition.
Clear markings
Standard Finish: • Conduit bodies and die cast covers: Aluminum lacquer finish. • Stamped covers: Natural. Compliances: • • • •
Retained deep slotted stainless steel screws
UL Listed. CSA Certified. Federal Spec. W-C-586. NEC Article 370-28.
Precision machined threads
Sample Specifications: • Conduit bodies shall be die cast copper-free* aluminum alloy A360. All conduit stops shall be free of rough edges. Conduit bodies shall be finished with powder coated paint. Conduit bodies shall be Red•Dot Catalog No. _______________ *Less than .004 copper content ®
H2
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H3
Conduit Bodies, Covers & Gaskets Threaded bodies for heavy wall rigid and IMC. Set screw bodies for thin wall conduit (EMT).
Through Feed
Cat. No.
Cat. No.
Rigid/IMC AC-1-RD AC-2-RD AC-3 AC-4-RD AC-5 AC-6-RD AC-7• AC-8• AC-9• AC-10-RD•
EMT BC-1 BC-2 BC-3 BC-4 BC-5 BC-6
D-PAK * DAC-1-CG† DAC-2-CG† DAC-3-CG†
• Retained stainless steel cover screws. • Cubic capacity UL and CSA clearly shown. • Smooth throats for easy wire pulling. • Ultra-high pressure die cast copper-free aluminum. • UL Listed, CSA Certified.
Hub Size
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
Cat. No.
AE-1 AE-2
Left/Right Side Opening
Rigid/IMC ALRL-19 ALRL-29 ALRL-39 ALRL-49 ALRL-59 ALRL-69
T-Style
AT-1
BT-1
d"
AT-2 AT-3 AT-4 AT-5 AT-6 AT-7• AT-8• AT-9• AT-10•
BT-2 BT-3 BT-4 BT-5 BT-6
f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
DBLB-1-C9 DBLB-2-C9 DBLB-3-C9
d" f" 1" 1b" 1d" 2"
BLL-1 BLL-2 BLL-3
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
®
Left Side Opening
ALL-1 ALL-2 ALL-3 ALL-4 ALL-5 ALL-6 ALL-7• ALL-8• ALL-9• ALL-10• D-PAK * DALL-1-CG† DALL-2-CG† DALL-3-CG†
Right Side Opening ALR-1 ALR-2 ALR-3 ALR-4 ALR-5 ALR-6 ALR-7• ALR-8• ALR-9• ALR-10• D-PAK * DALR-1-CG† DALR-2-CG† DALR-3-CG†
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
H
®
DAT-1-CG† DAT-2-CG† DAT-3-CG†
d" f" 1"
Covers and Gasket For Threaded and Set Screw Conduit Bodies Cat. No.
BLR-1 BLR-2 BLR-3
d" f" 1" 1b" 1d" 2"
D-PAK *
®
d" f" 1"
EMT BLRL-19 BLRL-29 BLRL-39 BLRL-49 BLRL-59 BLRL-69
®
D-PAK * DALB-1-CG† DALB-2-CG† DALB-3-CG† DALB-4-CG† DALB-5-CG† DALB-6-CG†
d" f" 1" BLB-1 BLB-2 BLB-3 BLB-4 BLB-5 BLB-6 BLB-7• BLB-8• BLB-9• BLB-10•
d" f"
Red•Dot
ALB-1 ALB-2 ALB-3 ALB-4 ALB-5 ALB-6 ALB-7• ALB-8• ALB-9• ALB-10•
Hub Size
Dead End
®
Back-Opening
Cat. No.
Covers
Gaskets
®
d" f" 1"
• Shipped with one CV cover 9 Shipped with one SCV cover †Shipped with one SCV cover and one GKN gasket * See Pages H48-H50 for complete D-PAK assortment
Cat. No.
Die Cast
Stamped
CV-1 CV-2 CV-3 CV-4 CV-5 CV-6 CV-7
SCV-1 SCV-2 SCV-3 SCV-4 SCV-5
Neoprene
Composition
GKN-1 GKN-2 GKN-3 GKN-4 GKN-5 GKN-6 GKN-7
GKV-1 GKV-2 GKV-3 GKV-4 GKV-5 GKV-6 GKV-7
Hub Size
d" f" 1" 1b"-1d" 2" 2d"-3" 3d"-4"
d" f" 1" 1b"-1d" 2" 2d"-3" 3d"-4"
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H3
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H4
Conduit Bodies, Covers & Gaskets C, E, & T Size
A
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
3g 4e 5c 7b 7b 9d 12b 12b 15 15
B
C
D
E
F
G
CI
4c 5a 5n 7g 7g 10i 13 13 16j 16j
1Q 1w 1f 2d 2d 3a 4d 4d 5d 5d
1c 1e 1g 2d 2f 3l 4d 4d 5l 5l
2u 2A 3d 4i 4i 5u 6g 6g 8m 8m
2h 2X 2e 3w 3w 4 5A 5A 6m 6m
m n 1 1c 1d 1O 2k 2k 3 3
4.3 7.3 11.8 32.0 32.0 69.5 190.0 190.0 366.0 366.0
C, E, & T
H E
T
Red•Dot
®
C
LL, LR, & LRL Size
A
B
C
D
E
F
G
H
CI
CI
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
3g 4e 5c 7b 7b 9d 12b 12b 15 15
3d 4a 4g 6d 6d 8l 11b 11b 14k 14k
4j 5a 5j 7g 7g 10i 13 13 16b 16b
1j 11r 1f 2d 2d 3a 4d 4d 5d 5d
1c 1e 1g 2f 2f 3k 4d 4d 5d 5d
3l 4a 4g 6j 6j 8i 10b 10b 12f 12f
2 2j 2d 3c 3c 3n 5d 5d 6d 6d
A g 1 1d 1d 1n 2g 2g 3 3
4.3 7.3 11.8 32.0 32.0 69.5 190.0 190.0 366.0 366.0
4.8 7.5 12.5 36.5 36.5 73.8
LRL STYLE ONLY
LL, LR, & LRL
LL
LR
LRL
Open Thru
H4
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H5
Conduit Bodies, Covers & Gaskets LB Size
A
B
C
D
E
F
CI
d" f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
3g 4e 5c 7b 7b 9d 12b 12b 15 15
4s 5a 5n 7g 7g 9m 13 13 16j 16j
1j 11r 1f 2d 2d 3a 4d 4d 5d 5d
1j 1e 1g 2d 2f 3k 3g 4d 5l 5l
3d 4b 4n 6d 6j 8 10B 10d 13d 13d
2h 2k 2f 3l 3m 4d 5b 5g 6n 6n
4.3 7.3 11.8 32.0 32.0 69.5 190.0 190.0 366.0 366.0
H Size
A
B
C
D
E
SCV-1 SCV-2 SCV-3 SCV-4 SCV-5
CV-1 CV-2 CV-3 CV-4 CV-5 CV-6 CV-7
d" f" 1" 1b" - 1d" 2" 2d" - 3" 3d" - 4"
3g 4e 5c 7b 9d 12s 15o
3d 4a 4g 6d 8l 11b 14k
12D 11r 1f 2d 3a 41r 51r
i i i i i a a
8-32 x c 8-32 x c 8-32 x c 12-24 x k 12-24 x k j-8 x e j-8 x e
Conduit Body Wiring Table* – Style of Fitting Trade Size f" 1" 1b" 1d" 2" 2d" 3" 3d" 4"
LB
C
T
LL, LR, LRL
#6 #4 #2 1/0 4/0 300 MCM 400 MCM 500 MCM 500 MCM
#6 #4 #2 1/0 2/0 250 MCM 250 MCM 350 MCM 350 MCM
#6 #4 #2 #1 1/0 2/0 2/0 250 MCM 250 MCM
#6 #4 #2 1/0 4/0 300 MCM 500 MCM 500 MCM 500 MCM
*The Maximum number and size of wire that can be safely pulled is based on three type XHHW wires or equal.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H5
®
Cat. No.
Red•Dot
CV & SCV Cat. No.
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H6
Mogul Pulling Elbow/Service Entrance Bodies
ASLB
ASLB-XL
Applications: • Raintight junction for bringing electrical service into a location. • Accessible wiring chamber provides a convenient location to pull conductors and make splices.
Smooth conduit stops
Copper-free aluminum Clean cover edges
Features/Benefits:
Red•Dot
®
H
• • • •
Copper-free* aluminum provides increased corrosion resistance. Precision cast and machined surfaces permit safer wire pulling. Clean cover edges provide good gasket sealing. Precision NPT threaded hubs allow trouble-free field installation for rigid and IMC conduit. • Retained deep slotted stainless steel cover screws for faster installation. • Clear UL, CSA and cubic content markings speed approval by inspectors.
Clear markings
Standard Materials: • Service Entrance Bodies: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Covers d" and f": Stamped aluminum alloy, and stainless steel screws. • Covers 1" through 4": Die cast aluminum alloy A360 with less than .004 copper content (copper-free), and stainless steel screws. • Gaskets: Composition.
Complete with cover and gasket
Precision machined threads
Standard Finish: • Aluminum lacquer finish. Compliances: • • • •
UL Listed. CSA Ceritfied. Federal Spec. W-C-586. NEC Article 370-5 and 370-28.
Sample Specifications: • Service Entrance Fittings shall be die cast copper-free* aluminum alloy A360. All conduit stops shall be free of rough edges. Service Entrance Fittings shall be finished with aluminum lacquer. Service Entrance Fittings shall be Red•Dot Catalog No. _________ *Less than .004 copper content
Mounts flush to the wall
Retained deep slotted screws
®
H6
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H7
Mogul Pulling Elbow/Service Entrance Bodies Spacious, accessible wiring chamber for pulling conductors, making splices, and bringing electrical service into a location. • Dome cover - extra bending room. • Deep slotted stainless steel cover screws. • “I” beam construction adds strength. • Smooth throats for easy wire pulling. • Extra wiring room. • Meets NEC Article 370-28. • Ultra-high pressure die cast aluminum. • UL Listed, CSA Certified. • Copper-free aluminum, less than .004 copper content.
Cat. No.
Hub Size
Hub Size
MGKV-4 MGKV-5 MGKV-6 MGKV-7
1 or 1b" 1d" or 2" 2d" or 3" 3d" or 4"
Composition Gasket
Bodies with Covers and Gaskets
H
®
1" 1b" 1d" 2" 2d" 3" 3d" 4’
Red•Dot
MALB-3 MALB-4 MALB-5 MALB-6 MALB-7 MALB-8 MALB-9 MALB-10
Cat. No.
Service Entrance Bodies Accessible junctions for bringing electrical service into a location. • Mounts flush to wall. • Standard and extra long configurations. • Retained deep slotted stainless steel cover screws. • Smooth throats for easy wire pulling. • Ultra-high pressure die cast aluminum. • Meets NEC Article 370-28. • UL listed, CSA Certified. • Copper-free aluminum, less than .004 copper content.
Cat. No.
Hub Size
2 ⁄2" - 4" Bodies with Covers and Gaskets 1
SALB-7 SALB-8 SALB-9 SALB-10 Cat. No.
Hub Size
⁄2" - 2" Bodies with Covers and Gaskets
1
ASLB-1 ASLB-2 ASLB-3 ASLB-4 ASLB-5 ASLB-6
2d" 3" 3d" 4"
Extra Long Bodies with Covers and Gaskets d" f" 1" 1b" 1d" 2"
ASLB-XL4 ASLB-KL6
1b" 2"
NOTE: Raintight when used with appropriate Red•Dot covers. * See Pages H48-H50 for complete D-PAK assortment. ®
®
D-PAK * ®
DASLB-1 DASLB-2 DASLB-3
d" f" 1"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H7
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H8
Mogul Pulling Elbow/Service Entrance Bodies ASLB
ASLB & ASLB-XL
Size
A
B
C
D
E
F
CI
d" f" 1" 1b" 1d" 2"
3h 3n 4b 5d 6b 6f
2f 3b 3g 5b 6 6d
1b 1d 1f 2c 2k 3a
1l 1f 2i 3 3b 4
1a 1c 1f 2i 2k 2g
1h f 1h 1b 1d 1e
2.0 3.0 5.5 13.0 18.8 38.8
E
F
CI
1j 1e
24.5 58.0
ASLB-XL Size
A
B
C
D
1b" 2"
8 9n
7d 9f
2d 3c
2f 3f
2r 21j
H Red•Dot
®
SALB Size
A
B
C
D
E
F
G
2d" 3" 3d" 4"
13 13 16d 16d
12e 12e 15c 15c
4m 4d 5d 5d
4d 5b 6b 6b
3c 4a 5a 5a
2b 2k 2f 2f
5g 6k 7l 7l
CI 190 190 366 366
SALB
MALB Size
A
B
C
D
E
F
G
CI
1" 1b" 1d" 2" 2d" 3" 3d" 4"
9e 9e 14w 14w 21W 21W 28e 28e
9h 9h 14b 14b 21X 21X 28W 28W
2d 2d 2f 2f 4d 4d 5d 5d
2f 2f 4 4 5e 5e 6d 6d
2h 2h 21i 21i 4a 4a 5a 5a
8d 8d 13 13 18 18 24 24
3e 3e 5r 5r 7z 7z 9z 9z
40 40 128 128 398 398 766.7 766.7
MALB
H8
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H9
Zinc Concrete Slab Inserts, Elbows and Plugs
ESL
ES
Applications:
Old Way
• Permits in-slab ceiling drops and floor mounts in poured concrete. • Provides flush threaded conduit hub for mounting, pulling and future access to conduit systems. • Design permits prefabrication of in-slab conduit system. Features/Benefits:
Conduit running in a cement slab is bent 90º to run through a hole drilled in the form. Drilling takes time and damages the form. Stripping form often damages conduit stubs. Varying length of stubs requires individual measuring and cutting of conduit drops.
®
®
Red•Dot Way
4" Slab
ESL
Standard Material: • Die cast zinc alloy ZAMAK 3. Certified by the Certified Zinc Alloy Plan (CZAP).
6" Slab
Standard Finish: • Natural. ES
Compliances: • UL Listed. • CSA Certified. Sample Specifications: • Concrete Slab Inserts shall be die cast Zinc Alloy* ZAMAK 3. All conduit stops shall be coined and free of rough edges. Service Entrance Fittings shall be Red•Dot Catalog No. _______________ * Certified by the American Die Casting Institute.
Conduit running in a cement slab is attached to a 90º concrete slab insert, or conduit is bent 90º and is threaded to a straight insert. Nail or screw fitting to wood or metal forms. After concrete is poured and forms stripped, conduit drops quickly into fittings from floor below. Drops are easily measured from ceiling line to switch or outlet height and cut in uniform lengths.
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H Red•Dot
• Flush design leaves no broken or bent stubs for easy removal of undamaged forms. • Flush design permits simplified in-slab work. • Flush design leaves a neat, uncluttered job. • Offered in straight ES configuration for straight through conduit runs and mounting of floor boxes in slabs over 6" thick. • Offered in ESL configuration to eliminate bending of conduit in slabs over 4" thick. • Precision cast and machined surfaces permit safer wire pulling. • ZAMAK 3 Zinc can be embedded in concrete.
H9
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H10
Zinc Concrete Slab Inserts, Elbows and Plugs
Concrete slab inserts permit in-slab ceiling drops and floor mounts in poured concrete.
4" Slab ESL
• For Rigid and IMC. • Slab insert is nailed to form prior to pour. • Removable seal keeps threads cement free. • ESL eliminates: - Bends in 4" concrete slabs. - Damage to form. - Cutting off conduit stubs. • UL Listed, CSA Certified.
6" Slab ES
Threaded Rigid or IMC Conduit Inserts
Red•Dot
®
H
Cat. No.
Hub Size
Straight
Cat. No.
Hub Size
ESL-1 ESL-2 ESL-3
d" f" 1"
90˚ ES-1 ES-2 ES-3
d" f" 1"
Elbows and Plugs
Close Up Plugs, Zinc
Female to Female Aluminum Elbows Cat. No.
Cat. No.
Hub Size
Corner Rigid IMC
EMT
ACE-1 ACE-2
BCE-1 BCE-2
d" f"
Pulling Rigid IMC
EMT
APEF-1 APEF-2
BPEF-1 BPEF-2
Cat. No.
Color
Hub Size
PLG-1-RD PLG-2-RD PLG-3-RD
Silver Silver Silver
d" f" 1"
Silver Bronze White Silver
d" d" d" f"
D-PAK * ®
DPLG-1 DPLG-1-BR DPLG-1-WH DPLG-2
d" f"
* See Pages H48-H50 for complete D-PAK assortment ®
H10
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:14 AM
Page H11
Zinc Concrete Slab Inserts, Elbows, and Plugs ESL Cat. No.
Size
A
B
C
D
E
F
G
ESL-1 ESL-2 ESL-3
d" f" 1"
4B 5™ 5q
3} 3z 3f
3C 4a 3n
3i 3p 2©
1g 2a 2k
1o 1b 11r
b b b
ESL
ES Cat. No.
Size
A
B
C
D
E
ES-1 ES-2 ES-3
d" f" 1"
1∂ 2™ 2l
1l 1e 2
1z 1O 2j
1o 1b 1w
b b b
H Red•Dot
ES
®
APEF and BPEF Size d" f"
APEF
A
B
C
1h 1i
r l
1a 1R
BPEF
ACE and BCE Size d" f"
ACE
A
B
2c 2y
1a 1j
BCE
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H11
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H12
Industrial Vaportight Lighting
VAG-C
VKG-C
VWG-C
VXG-C
VXWG-C
Applications:
Red•Dot
®
H
• Low maintenance indoor/outdoor lighting where moisture, dirt, dust, corrosion and rough service are problems. • Low profile fixture design for where low ceiling height presents a lighting problem. • To light cold storage facilities, walkways, bridges, tunnels and security locations. • Used with colored globes as warning, caution or directional lights. • For 100 or 200 watt medium base incandescent lamps. Features/Benefits: • Copper-free* aluminum and stainless steel screws provide increased corrosion resistance. • Precision cast and machined surfaces permit safer wire pulling. • Fully threaded glass globes prevent cross threading assuring a tight seal. • High quality replaceable porcelain socket with high temperature leads result in a long-lasting fixture. • Five mounting configurations packaged three different ways to suit all customer requirements • Colored, heat resistant and shatterproof LEXAN globes available. ®
Standard Materials: • Fixture and guards: Die cast aluminum alloy A360 with less than .004 copper content (copper-free), and stainless steel screws. Globe: Lime crystal glass. Socket: Center contact, porcelain, medium base. Standard Finish: • Aluminum lacquer finish. Compliances: • UL Listed. • Suitable for use in Wet Locations only when oriented as shown. (mounted with lamp base up and guard/globe down). Sample Specifications: • Fixture shall be die cast copper-free* aluminum alloy A360. All conduit stops shall be coined and free of rough edges. LEXAN globes shall have full threads. Sockets shall be porcelain. Fixtures shall be finished with aluminum lacquer. Fixtures shall be Red•Dot Catalog No. _______________ ®
®
*Less than .004 copper content
H12
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H13
Industrial Vaportight Lighting Ceiling Mount with Adapter Plate Cat. No.
Hub Size
Max. Watt
Description
VK-11 VK-21 VK-12 VK-22
d" f" d" f"
100 100 200 200
Pendant cap with socket screw terminals, gasket and screws
VKG-11 VKG-21 VKG-12 VKG-22
VKG-11-C VKG-21-C VKG-12-C VKG-22-C
d" f" d" f"
d" f" d" f"
100 100 200 200
100 100 200 200
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
100 200
Ceiling outlet box cap with socket with leads, gasket and screws
VAG-01 VAG-02
100 200
Ceiling outlet box cap with socket with leads, gasket, screws, and globe
VAG-01-C VAG-02-C
100 200
Ceiling outlet box cap with socket with leads, gasket, screws, globe and cast guard
Cat. No.
Pendant cap with socket screw terminals, gasket, screws and globe
Pendant cap with socket screw terminals, gasket, screws, globe and cast guard
VA-01 VA-02
Ceiling Mount Cross Feed (5 tapped holes)
Pendant Mount Cat. No.
Description
H
®
• Compatible with incandescent and most self-ballasted compact fluorescent bulbs. • For indoor or outdoor use. • Fixture and guard die cast copper-free aluminum, less than .004 copper content. • Available in components or complete fixture. • Low silhouette incandescent vaportight. • Variety of mounting configurations. • UL Listed.
Max. Watt
Red•Dot
Low maintenance indoor lighting where moisture, dirt, dust, corrosion and rough service are a problem.
Hub Size
Hub Size
Max. Watt
Description
VX-11 VX-21 VX-12 VX-22
d" f" d" f"
100 100 200 200
Ceiling-cross feed box with gaskets, socket with leads, screws, 4 closure plugs and cast mounting lugs
VXG-11 VXG-21 VXG-12 VXG-22
d" f" d" f"
100 100 200 200
Ceiling-cross feed box with gaskets, socket with leads, screws, 4 closure plugs, cast mounting lugs and globe
VXG-11-C VXG-21-C VXG-12-C VXG-22-C
d" f" d" f"
100 100 200 200
Ceiling-cross feed box with gaskets, socket with leads, screws, 4 closure plugs, cast mounting lugs, globe and cast guard
NOTE: For upright mounting only. Caution: In ordering Lexan Globe, wattage is rated 75% of standard globe size i.e. VGLL-02 is for use on 200 watt fixtures, but only rated for 150 watt lamps.
www.tnb.com
H13
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H14
Industrial Vaportight Lighting Wall Mount with Adapter Plate
Wall Mount Cross Feed (5 tapped holes)
Cat. No.
Max. Watt
Description
Cat. No.
Hub Size
Max. Watt
Description
VW-01 VW-02
100 200
Wall mount unit with socket with leads, gaskets, and screws
VXW-11 VXW-21 VXW-12 VXW-22
d" f" d" f"
100 100 200 200
VWG-01 VWG-02
100 200
Wall mount unit with socket with leads, gaskets, screws, and globe
Wall mount cross feed with socket with leads, gaskets,and screws, 4 closure plugs, and cast mounting lugs
VXWG-11 VXWG-21 VXWG-12 VXWG-22
d" f" d" f"
100 100 200 200
Wall mount cross feed with socket with leads, gaskets, screws, 4 closure plugs, cast mounting lugs, and globe
VWG-01-C VWG-02-C
100 200
Wall mount unit with socket with leads, gaskets, globe, screws, and cast guard
VXWG-11-C VXWG-21-C VXWG-12-C VXWG-22-C
d" f" d" f"
100 100 200 200
Wall mount cross feed with socket with leads, gaskets, screws, 4 closure plugs, cast mounting lugs, globe and cast guard
Red•Dot
®
H
Industrial Vaportight Accessories
Globes
Guards Cat. No.
Max. Watt
Description
VGL-01 VGLA-01 VGLB-01 VGLG-01 VGLR-01 VGLH-01
100 100 100 100 100 150
Clear Amber Blue Green Red Clear heat resistant
VGL-02 VGLR-02 VGLH-02
200 200 300
Clear Red Clear heat resistant
VGLL-01 VGLL-02 VGLA-A1 VGLA-R1
75 150 75 75
Clear prismatic Clear prismatic Amber Red
Glass
Cat. No.
Max. Watt
Description
VGW-01 VGW-02
100 200
Clamp on plated steel guards
VGD-01 VGD-02
100 200
Die cast aluminum guards with positive locking screws.
Wire
Lexan
Not for use with guards.
Die Cast
Vaportight Boxes and Covers Cat. No.
NOTE: For upright mounting only. Caution: In ordering Lexan Globe, wattage is rated 75% of standard globe size i.e. VGLL-02 is for use on 200 watt fixtures, but only rated for 150 watt lamps.
LVX-1 LVX-2
V-B
H14
Max.Watt
Description
d" f"
Box, 3d" diameter, 5 tapped holes, 4 closure plugs with cast mounting lugs
none
Blank Cover 3d" diameter
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H15
Industrial Vaportight Lighting Pendant Mount (VKG)
VKG
Ceiling Mount (VAG)
Cat. No.
A
B
VKG-11 VKG-21 VKG-12 VKG-22
3c 3c 4c 4c
8i 8i 10a 10a
Cat. No.
C
D
4h 4h 5b 5b
8f 8f 10e 10e
Cat. No.
A
B
VAG-01 VAG-02
3c 4c
7k 9c
Cat. No.
C
D
4h 5b
7n 9m
VKG-11-C VKG-21-C VKG-12-C VKG-22-C
VAG
Red•Dot
VAG-01-C VAG-02-C
H
®
Ceiling Mount Cross Feed (VXG)
VXG
Wall Mount (VWG)
Cat. No.
A
B
E
F
VXG-11 VXG-21 VXG-12 VXG-22
3c 3c 4c 4c
81i 81i 10f 10f
3d 3d 3d 3d
1e 1e 1e 1e
Cat. No.
C
D
4h 4h 5b 5b
9j 9j 11i 11i
Cat. No.
A
B
E
F
VWG-01 VWG-02
3c 4c
8k 10c
4f 5f
3d 3d
VXG-11-C VXG-21-C VXG-12-C VXG-22-C
VWG
Cat. No. VWG-01-C VWG-02-C
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
C
D
4h 5b
8n 10m
H15
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H16
Industrial Vaportight Lighting Wall Mount Cross Feed (VXWG)
VXWG Cat. No.
A
B
VXWG-11 VXWG-21 VXWG-12 VXWG-22
3c" 3c" 4c" 4c"
8k" 8k" 10c" 10c"
VXWG-11-C VXWG-21-C VXWG-12-C VXWG-22-C
3c 3c 4c 4c
8k 8k 10c 10c
C
4h" 4h" 5i" 5i"
D
8n" 8n" 10m" 10m"
LVX-1 LVX-2
E
F
1e" 1e" 1e" 1e"
3d" 3d" 3d" 3d"
1e" 1e" 1e" 1e"
3d" 3d" 3d" 3d"
1e" 1e"
3d" 3d"
G
H
I
J
CI
e" e"
5" 5"
4k" 4k"
2m" 2m"
10.3 10.3
E
I.D
g" g" g" g"
21h" 31i" 2g" 3g" 2g" 2g"
Red•Dot
®
H
Threaded Glass Globe (VGL)
Threaded Glass Plastic Globe (VGL, VGLL)
VGL Cat. No. VGL-01series VGL-02 series VGLL-01 VGLL-02 VGLA-A1 VGLA-R1
A
B
C
D
3c" 4c" 3W" 4W" 3W" 3W"
6W" 8c" 5n" 8b" 5n" 5n"
3j" 4j" 3c" 4c" 3c" 3c"
1" 1"
Guards (VGD, VGW)
VGD, VGW
H16
Cat. No.
A
B
VGD-01 VGD-02 VGW-01 VGW-02
4h" 5j" 4h" 5j"
7" 8e" 6g" 8f"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H17
Cross Reference Ceiling Mount
Wall Mount
red•dot
Stonco
Killark
Appleton
VA-01 VA-02 VAG-01 VAG-02 VAG-01-C VAG-02-C
VK1 VK2 VK1K VK2K VK1GC VK2GC
VFC-100 VFC-200 VOB-100 VOB-200 VOBG-100 VOBG-200
JB1-A JB1-A JB10-A JB20-A JB10G-A JB20G-A
Crouse Hinds VXH15 VXH12 – – VXH15GP VXH12GP
Ceiling Mount Cross-Feed Stonco
VX-11
VCXL11
VXA-1 VGX-1
VX-21
VK1+VXL13
VXA-2 VGX-2
VX-12
VCXL21
VXA-1 VGX-1
VX-22
VK2+VXL13
VXA2 VGX-2
VXG-11
VCXL11K
VXG-12
VXG-22
VXG-11-C
VXG-21-C
VXG-12-C
VXG-22-C
VXAG-110 VUXV-1-100 VUCG-1-100 VUHG-1-100 VK1K+VXL13 VXAG-210 VUXG-2-100 VUCG-2-100 VUHG-2-100 VCXL21K VXAG-120 VUXG-1-200 VUCG-1-200 VUHG-1-200 VK2K+VXL13 VXAG-220 VUXG-2-200 VUCG-2-200 VUHG-2-200 VCXL11GC VXAGG-110 VUXGG-1-100 VUCGG-1-100 VUHGG-1-100 VK1GC+VXL13 VXAGG-210 VUXGG-2-100 VUCGG-2-100 VUHGG-2-100 VCXL21GC VXAGG-120 VUXGG-1-200 VUCGG-1-200 VUHGG-1-200 VK2GC+VXL13 VXAGG-220 VUXGG-2-200 VUCGG-2-200 VUHGG-2-200
Stonco
VK-11 VK-21 VK-12 VK-22 VKG-11 VKG-21 VKG-12 VKG-22 VKG-11-C VKG-21-C VKG-12-C VKG-22-C
VP-11 – VP21 – VP11K – VP21K – VP11GC – VP21GC –
Killark VGA-1 VGA-2 VGA-1 VGA-2 VUAG-1-100 VUAG-2-100 VUAG-1-200 VUAG-2-200 VUAGG-1-100 VUAGG-2-100 VUAGG-1-200 VUAGG-2-200
Appleton
Crouse Hinds
VW-01 VW-02 VWG-01 VWG-02 VWG-01-C VWG-02-C
VW1 VW2 VW1K VW2K VW1GC VW2GC
VB-1 VB-2 VOBL-100 VOBL-200 VOBLG-100 VOBLG-200
JBW1-A JBW1-A JBW10-A JBW20-A JBW10G-A JBW20G-A
VG175, VXHB15 VXHB12 – – VG1759, VXHB15GP VXHB12GP
Appleton
Crouse Hinds
Wall Mount Cross-Feed Appleton VXHA50-A VC50-A V50-A VXHA75-A VC75-A V75-A VXHA50-A VC50-A V50-A VXHA75-A VC75-A V75-A VXHA1050-A VC1050-A V1050-A
Crouse Hinds VXHF15 V175 VC175 VXHF25 V275 VC275 VXHF12 VXHF22
–
VXHA2050-A VC2050-A V2050-A
–
VXHA2075-A VC2075-A V2075-A
–
VXHA1050G-A VC1050G-A V1050G-A
VXHF15GP V1759 VC1759
VXHA1075G-A VC1075G-A V1075G-A
VXHF25GP V2759 VC2759
VXHA2075G-A VC2050G-A V2050G-A
VXHF12GP
VXHA2075G-A VC2075G-A V2075G-A
VXHF22GP
VA50-A VA75-A VA50-A VA75-A VA1050-A VA1075-A VA2050-A VA2075-A VA1050-G-A VA1075-G-A VA2050G-A VA2075G-A
Stonco
VXW-11 VXW-21 VXW-12 VXW-22 VXWG-11 VXWG-21 VXWG-12 VXWG-22 VXWG-11-C VXWG-21-C VXWG-12-C VXWG-22-C
VWXL11 VW1+VXL13 VWXL21 VW2+VXL13 VWXL11K VW1K+VXL13 VWXL21K VW2K+VXL13 VWXL11GC VW1GC+VXL13 VWXL21GC VW2GC+VXL13
Killark VB-1+VBC-1 VB-2+VBC-2 VB-1+VBC-1 VB-2+VBC-2 VOBL-100+VBC-1 VOBL-200+VBC-2 VOBL-100+VBC-1 VOBL-200+VBC-2 VOBLG-100+VBC-1 VOBLG-200+VBC-2 VOBLG-100+VBC-1 VOBLG-200+VBC-2
– VGAT75-A – VGAT75-A – VGAT1075-A – VGAT2075-A – VGAT1075G-A – VGAT2075G-A
VJ175, VXHF15 VJ275, VXHF25 VXHF12 VXHF22 – – – – VJ1759, VXHBF15GP VJ2759, VXHBF25GP VXHBF12GP VXHBF22GP
Accessories
VXHA1075-A VC1075-A V1075-A
Appleton
red•dot
–
Pendant Mount red•dot
Killark
red•dot
Stonco
LVX-1
VXL1
LVX-2
VXL13
V-B V-1 V-2 VGD-01 VGD-02 VGD-01 VGD-02 VGLA-01 VGLA-02 VGLB-01 VGLB-02 VGLG-01 VGLG-02 VGLH-01 VGLH-02 VGLR-01 VGLR-02 VGLL-01 VGLL-02 VGLA-A1 VGLA-R1 VGW-01 VGW-02
– – – V131 V132 VGC100 VGC200 VGA100 VGA200 VGB100 VGB200 VGG100 VGG200 VGCH100 VGCH200 VGR100 VGR200 VPRC5 VPRC10 – – V127 V128
Killark
Appleton
Crouse Hinds
Crouse Hinds
VGH-1, VBC-1 VGX-1 VLJSX-1 VGC-1 VGH-2, VBC-2 VGC-2 VLJSX-2 VGC-2 VG-2 VAG-100 VAG-200 VCG-100 VCG-200 VAMG-100 VAMG-200 VBG-100 VBG-200 VGG-100 VGG-200 VCGP-100 VCGP-200 VRG-100 VRG-200 VPLCG-100 VPLCG-200 – – – –
JBX50L-A
VXFT10 VXF10
JBX75L-A
VXFT20 VXF20
JBK-1B-CA JBK-50-A – VGU-1 VGU-2 VGL-1CL VGL-2CL VGL-1AM VGL-2AM VGL-1BL VGL-2BL VGL-1GR VGL-2GR VGL-1HR VGL-2HR VGL-1RE VGL-2RE – – – – VWG-1 VWG-2
GRF10 GRF11 GRF12 V910, V911, P50 P21 G54 G24 VN76, G58 G28 VN73, G56 G26 VN72, G55 G25 V63, V183, G34, G251 V93 VN85, VN75, G57 G27 V470 G63 G65 V475, G67
VDA15, VDA175 VDA25, VDA275 VDA12 VDA22 – – – – VDA15GP VDA25GP VDA12GP VDA22GP
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
H
®
VXG-21
Killark
Stonco
Red•Dot
red•dot
red•dot
www.tnb.com
H17
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H18
®
Dry-tite Universal Boxes
IH3-1-LM
2IH5-1
CCD
2CCTS
Applications: • Dry-tite boxes and covers protect wiring devices, switches, electronic components, and terminal blocks in Dry, Damp and Wet Locations. • Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices. • Junction box for branch conduits. ®
Red•Dot
®
H
Securely fastened mounting plates
Stainless steel springs
Corrosion resistant metal
Features/Benefits: • Alloy A380 aluminum, certified zinc alloy, and stainless steel springs provide increased corrosion resistance. • Die cast construction and industrial design combine to produce a rugged protective enclosure for devices on many applications. • Clean cover edges provide good gasket sealing. • Precision cast and machined surfaces permit safer wire pulling. • Clear UL and cubic content markings speed approval by inspectors. • Convenient mounting lugs for a variety of mounting methods. • Securely fastened mounting plates reduce costly call backs. Standard Materials: • Boxes: Die cast aluminum alloy A380. • Cover Plates: Stamped aluminum alloy or certified die cast zinc alloy ZAMAK 3. • Cover Lids: Certified die cast zinc alloy ZAMAK 3. Standard Finish: • Aluminum lacquer finish. Compliances: • • • • • • •
Clear marking
UL Listed. Boxes: CSA Certified with factory installed ground screw.** Covers: CSA Certified. Covers suitable for use in Wet Locations with covers closed. CCB and CCT series covers suitable for use in Wet Locations. Federal Spec. W-C-586. NEMA 3R Rated.
Clean cover edges
Precision machined threads Ground screw
Sample Specifications: • Universal device boxes and covers shall be of aluminum alloy A380 and certified zinc alloy. All conduit stops shall be free of rough edges. Covers shall have stainless steel springs. Covers shall be finished with aluminum lacquer. Universal device boxes And covers shall be Red•Dot Catalog No. ____________ ®
**Consult factory for lead time and minimum quantity.
H18
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H19
Accessible wiring chamber provides a convenient location to pull conductors and make splices in dry, damp or wet locations.
®
Dry-tite Universal Boxes
• Maximum cubic capacity. • Securely fastened mounting plates. • Corrosion resistant materials. • Powder coated finish. • Ground screw included. • Precision machined threads. • Clear UL and cubic volume marking.
Two Gang Cat. No.
Hub Size
Outlets
2IH3-1• 2IH3-2•
d" f"
Top 1 Bottom 1 Back 1 Total 3
Three Outlets
Single Gang Cat. No.
Hub Size
Color
Outlets
D-PAK * ®
Three Outlets IH3-1 IH3-2 IH3-1-LM• IH3-2-LM•
Silver Silver Silver Silver
d" d" d" f" 1"
Silver Bronze White Silver Silver
Top 1 Bottom 1 Back 1 Total 3
d"
2IH4-1• 2IH4-2•
d" f"
Four Outlets
D-PAK * ®
DIH3-1-LM• DIH3-1-LM-BR• DIH3-1-LM-WH• DIH3-2-LM• DIH3-3-LM
Five Outlets
d" f" d" f"
Silver Silver Silver Silver
DIH4-1-LM• DIH4-1-LM-BR• DIH4-1-LM-WH• DIH4-2-LM•
d" d" d" f"
Silver Bronze White Silver
IH5-1 IH5-2 IH5-1-LM• IH5-2-LM•
d" f" d" f"
Silver Silver Silver Silver
d" f"
Silver Silver
d" f"
Silver Silver
2IH5-1• 2IH5-2•
d" f"
Top 2 Bottom 2 Back 1 Total 5
2IH5S2-1• 2IH5S2-2•
d" f"
Top 1 Bottom 1 Side 1 Side 1 Back 1 Total 5
2IH7-1• 2IH7-2•
d" f"
Top 3 Bottom 3 Back 1 Total 7
2IH7S2-1• 2IH7S2-2•
d" f"
Top 2 Bottom 2 Side 1 Side 1 Back 1 Total 7
Top 2 Bottom 1 Back 1 Total 4
D-PAK * ®
Five Outlets (2 side)
Five Outlets Top 2 Bottom 2 Back 1 Total 5
Seven Outlets
D-PAK * ®
DIH5-1-LM• DIH5-2-LM• Five Outlets (2 side) IH5S2-1• IH5S2-2•
Top 1 Bottom 1 Side 1 Side 1 Back 1 Total 5
Seven Outlets (2 side)
Six Outlets (3 side) IH6S2-1• IH6S2-2•
d" f"
Silver Silver
Top 1 Bottom 1 Side 2 Side 1 Back 1 Total 6
NOTE: Raintight when used with appropriate Red•Dot covers. Boxes supplied with 2 closure plugs and ground screw. • With mounting lugs * See Pages H48-H50 for complete D-PAK assortment. ®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H19
H
®
Four Outlets IH4-1 IH4-2 IH4-1-LM• IH4-2-LM•
Top 2 Bottom 1 Back 1 Total 4
Red•Dot
d" f" d" f"
D2IH3-1
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H20
®
Dry-tite Universal Boxes Extensions – Single Gang
Deep Boxes – Single Gang Cat. No.
Hub Size
Cat. No.
Outlets
Hub Size
Outlets
Description
IHE
N/A
0
Extension ring for one gang box with gasket and screws
IHE4-1
d"
Top 2 Bottom 2 Total 4
Four hole extension ring for one gang box with 4 plugs, gasket and screws
d" f"
Top 1 Bottom 1 Total 2
d" f"
Top 2 Bottom 2 Side 1 Side 1 Total 6
6 Hole flanged box extension adapter with four plug gasket and screws
Hub Size
Outlets
Description
N/A
0
Extension ring for two gang boxes with gasket and screws
Hub Size
Outlets
Description
d" f"
4
Round extension with gasket and screws
No Outlets
Three Outlets IHD3-1• IHD3-2• IHD3-3•
d" f" 1"
Top 1 Bottom 1 Back 1 Total 3
Four Outlets
Four Outlets IHD4-1• IHD4-2•
d" f"
Top 2 Bottom 1 Back 1 Total 4 Two Outlets, Flanged
Add-On
Red•Dot
®
H
IHEF2-1 IHEF2-2 Two Gang Five Outlets 2IHD5-2• 2IHD5-3•
f" 1"
Top 2 Bottom 2 Back 1 Total 5
Six Outlets, Flanged
Add-On
IHEF6S2-1 IHEF6S2-2
Three Gang Seven Outlets 3IHD7-2• 3IHD7-3•
f" 1"
Top 3 Bottom 3 Back 1 Total 7
2 Hole flanged box extension adapter with one plug gasket and screws
Two Gang Cat. No. No Outlets 2IHE
Mounting Lugs
• With mounting lugs
H20
Cat. No.
Description
LM
2 mounting lugs with self tapping screws. For LM boxes only
Round Cat. No. Four Outlets SE-47 SE-48
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H21
®
Dry-tite Single Gang Covers Single Gang Device Covers Cat. No.
Color
Description
Silver
Device mount
Silver Bronze White Silver Bronze White
Device mount Device mount Device mount Device mount stay open Device mount stay open Device mount stay open
CCDV CCDV-L
Silver Silver
Device mount Device mount with lock option
D-PAK * DCDV DCDV-BR DCDV-WH
Silver Bronze White
Device mount Device mount Device mount
Silver
Device mount
Silver Bronze White
Device mount Device mount Device mount
Silver Silver
Silver Bronze White
Duplex receptacle cover, horizontal CCD
Cat. No.
Color
Description
Single Receptacle Cover, vertical - 1.59" Opening Silver
CCSV-TL
Device mount
D-PAK * ®
DCCD DCCD-BR DCCD-WH DCCDSO DCCDSO-BR DCCDSO-WH
Integral Locking Hasp
NEW
Motor base plug and cover, horizontal CCMB
Silver
Device mount 15A-125V motor base plug
CCT
Silver
Device mount switch cover only, packed with spacers and screws
Duplex receptacle cover, vertical
®
Switch cover only
GFCI receptacle cover, horizontal
Red•Dot
CCG
H
D-PAK * ®
Switch cover with switch
®
DCCG DCCG-BR DCCG-WH
CCT-1 CCT-1-20 CCT-2-20
Silver Silver Silver
Device mount Device mount with lock option
CCT-3
Silver
Device mount Device mount Device mount
Single Gang Lampholder Covers
GFCI receptacle cover, vertical CCGV CCGV-L
Single pole 15A, 125V Single pole 20A, 120-277V Double pole 20A, 120-277V All with spacers and screws 3-way switch 15A, 125V
D-PAK * ®
DCGV DCGV-BR DCGV-WH
Single receptacle cover, horizontal - 1.485" Diameter Opening CCS
Silver
Device mount
Single receptacle cover, vertical - 1.59" Diameter Opening CCSV CCSV-L
Silver Silver
CCPO
Silver
Device mount Device mount with lock option Power outlet cover with 2.156" diameter opening. Box mount.
LC-11
Cat. No.
Cat. No.
Standard (2m" x 4d") LC-11
Jumbo (3a" x 5a") LF11
Size
Description
d"
One hole Device mount. Two holes. Device mount. Three holes. Device mount.
LC-21
___
d"
LC-31
LF31
d"
Cat. No.
Color
Size
Description
DLC-31
Silver
d"
DLC-31-BR
Bronze
d"
DLC-31-WH
White
d"
Three holes Device mount Three holes Device mount Three holes. Device mount
D-PAK * ®
LC-21
Single Gang Gaskets Cat. No.
Color
Description
CCK CCSK
Black Black
Neoprene Neoprene
LC-31 NOTE: Raintight when used with appropriate Red•Dot boxes • All covers packed with gasket and screws * See Pages H48-H50 for complete D-PAK assortment ®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H21
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H22
®
Dry-tite Two Gang Covers Two Gang Device Covers Cat. No.
Description
Two duplex receptacle cover
Cat. No.
Description
Double Switch Cover Device mount Device mount with lock option
2CCD 2CCD-L
2CCT 2CCT-1
Cover only, packed with spacers Cover with two single pole 15A, 125V switches and spacers
Two GFCI receptacle cover Device mount
2CCG
Switch and one duplex receptacle cover 2CCTD 2CCTD-1
One duplex and one GFCI receptacle cover Device mount
2CCDG
Switch and one GFCI receptacle cover 2CCTG
Red•Dot
®
H
Cover only, packed with spacers Cover with one switch single pole 15A, 125V and one duplex receptacle and spacers
Device mount cover only with spacers
Two single receptacle cover - 1.485" Diameter Opening Device mount
2CCS
®
Dry-tite Blank Covers Cat. No.
Color
Description
CCB CCB-FS
Silver Silver
Device mount Box mount
DCCB DCCB-BR DCCB-WH
Silver Bronze White
Device mount
2CCB 2CCB-FS
Silver Silver
Device mount Box mount
D2CCB
Silver
Device mount
3CCB
Silver
Box mount
Single Gang One single receptacle and one duplex receptacle cover 1.485" Diameter Opening Device mount
2CCSD
D-PAK * ®
Two Gang Single receptacle and one GFCI receptacle cover 1.485" Diameter Opening Device mount
2CCSG
D-PAK * ®
Three Gang NOTE: Raintight when used with appropriate Red•Dot boxes. All covers packed with gasket and screws. * See Pages H48-H50 for complete D-PAK assortment ®
®
H22
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H23
®
Dry-tite Universal Boxes Single Gang Boxes
Single Gang Boxes Cat. No. IH IH IH-LM IH-LM IH-S IH-S IHD IHD IHD
IH
Hub Size
A
B
C
D
d" f" d" f" d" f" d"’ f" 1"
4l 4l 4l 4l 4l 4l 4l 4l 4l
2m 2m 2m 2m 2m 2m 2m 2m 2m
2 2 2 2 2 2 2e 2e 2e
e e e e e e e e f
E
3m 3m 3m 3m 3m 3m 3m
F
G
H
J
CI
3d 3d 3d 3d 3d 3d 3d
3b 3b 3b 3b 3b 3b 3b 3b 3b
1g 1g 1g 1g 1g 1g 1g 1g 1g
1d 1d 1d 1d 1d 1d 1d 1d 1d
17.3 17.0 17.3 17.0 17.0 17.0 24.8 24.8 23.5
Two Hole Flanged Box Extension Adapter
Single Gang Extension Rings
Six Hole Flanged Box Extension Adapter
H Red•Dot ®
IHE4-1
IHEF2 (Add-On)
IHE
Two and Three Gang Boxes
IHEF6S2 (Add-On)
Two Gang Extension Ring
2IH & 3IH
2IHE
Two and Three Gang Boxes Cat. No.
A
B
C
D
E
F
G
H
2IH3 2IH4 2IH5 2IH5S2 2IH7 2IH7S2 2IHD5 3IHD7
4l 4l 4l 4l 4l 4l 4l 4l
4e 4e 4e 4e 4e 4e 4e 6k
2h 2h 2h 2h 2h 2h 2W 2W
e e e e e e f 1i
5 5 5 5 5 5 5 6m
3d 3d 3d 3d 3d 3d 3d 3d
3W 3W 3W 3W 3W 3W 3W 3b
3f 3f 3f 3f 3f 3f 3f 5e
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
J
K
1d 1d 1d 1d 11i 11i
L
M
CI
3b 3b 3b 3b 3b 3b 3b 3b
3l 3l 3l 3l 3l 3l 3l 3l
31.8 31.8 31.8 31.8 30.3 32.0 40.3 54.8
H23
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H24
®
Dry-tite Universal Boxes Single Gang Covers
CCD
CCDV AND CCGV
CCT
CCB
H Red•Dot
®
CCG
CCS
CCSV
CCMB
Typical FS Mount Hole Pattern
Two and Three Gang Covers
2CCSD and 2CCSG
3CCB
2CCT
H24
2CCTD
2CCB
2CCS
2CCD & 2CCG
2CCTS
2CCTG-FS
Typical FS Mount Hole Pattern
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H25
®
Code Keeper
Wet or Dry, All Outlets Can Go Undercover with Code Keeper ®
Code Keeper weatherproof covers are required by the National Electric Code anyplace where water may come in contact with electrical outlets when a plug is in use. Code Keeper covers are also ideal anywhere to prevent accidental disconnects, reduce tampering, and to provide a lockable cover that meets OSHA requirements. ®
®
Suggested Applications:
®
®
®
®
Commercial: for vending machines, car washes, restaurant kitchens.
®
®
®
®
National Electric Code Article: 406.8(B): Industrial: for manufacturing areas, food processing, labs, loading docks.
(1) 15- and 20- Ampere, 125- and 250-volt receptacles installed outdoors in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted.
Recreational: for pools and spas, athletic fields, golf courses.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H25
®
Residential: for holiday and landscape lighting, bug zappers, sprinkler systems.
H Red•Dot
Residential – holiday and landscape lighting, wells and sump pumps, sprinkler systems, plug-in timers, garages, patios. Commercial – vending machines, car washes, outdoor signs, restaurant kitchens, greenhouses and nurseries, marinas, garages, lumberyards. Industrial – manufacturing areas, food processing, water treatment plants, security cameras, laboratories, washdown areas, loading docks. Recreational – pools and spas, parks, playgrounds, zoos, RV connections, athletic fields, ball parks, stadiums, outdoor stages, amphitheaters, golf courses. The electrical code is the reason you need a wet location cover, but the reason to buy Code Keeper covers are simple: aluminum construction; easy installation with instructions in English, Spanish, and French; and a lifetime warranty from a manufacturer that has defined reliability in electrical construction materials for over half of a century. Cover the code with protection that lasts a lifetime with Code Keeper covers. The National Electric Code requires you to cover outdoor or other wet location receptacles any time they are in use to ensure the safety of anyone who may come in contact with them. Code Keeper covers are corrosion-resistant, aluminum wet location covers that meet the requirements of the National Electric Code and are backed by a lifetime warranty. Red•Dot ’s Code Keeper wet location cover is NEMA 3R rated, UL Listed and CSA certified, and meets all the requirements of NEC Article 406.8(b). Code Keeper covers are rugged, corrosion-resistant metal construction that provide long-lasting durability and are not subject to cracking or breaking. Made with the same Red•Dot quality that contractors know and trust, Code Keeper covers offer a lifetime of use and safety.
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H26
®
Code Keeper Wet Location Covers
Single Gang Medium Horizontal
Single Gang Small Vertical
Single Gang Medium Vertical
Single Gang Large Vertical
Two Gang
Applications:
Red•Dot
®
H
• Protects receptacles, switches, and plugs for single gang and two gang configurations in Dry and Wet Locations. • Provides a lockable cover that complies with OSHA lockout/ tagout requirements. • Prevents accidental equipment disconnects, reduces tampering, and deters theft and equipment removal.
Hinge Plate Cover
FS Mount
Features/Benefits: • Alloy A360 copper-free* aluminum provides increased corrosion resistance. • Die cast, metal construction provides long lasting durability. • NEMA 3R rating ensures protection against falling rain, sleet, and external ice formation when used with appropriate device boxes. • Clear UL and CSA markings speed approval by inspectors. • Wide range of cover depths and receptacle configurations accommodate almost every common plug and cord size. • Combination box or device mounting design provides flexibility in installation. • Trilingual instructions help to make installation easy for everyone. Standard Materials:
Device Mount
Padlock Eye for b" Shackle
• Covers and Plates: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Gaskets: Closed-cell foam. Standard Finish: • Aluminum lacquer finish. Compliances: • NEC Article 406.8(B). • UL Listed. • CSA Certified. Sample Specifications: • Code Keeper covers shall comply with NEC Article 406.8(b) and be die cast copper-free* aluminum alloy A360. Covers shall be finished with aluminum lacquer. Red•Dot Catalog No. _______________ ®
*Less than .004 copper content.
H26
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H27
®
Code Keeper Wet Location covers
All 15- and 20-Ampere, 125- and 250-volt receptacles installed outdoors in a wet location must have an enclosure that is weatherproof whether or not the attachment plug is inserted. ®
Code-Keeper is required by the National Electrical Code Article 406.8 (B) for unattended in-use plugs in wet locations. • Die Cast A360 aluminum alloy (less than .004 copper content). • NEMA 3R Rating. • Clear UL and CSA markings. • Wide range of cover depths and receptacle configurations. • Sturdy lockable cover tab compiles with OSHA lockout/tagout requirements. • Combination box or device mount design (for most styles). • Powder coated finish.
H
Two Gang
Single Gang
Cat. No.
Description
Regular Cover 41⁄4" Internal Depth
Small Vertical Cover 21⁄4" Internal Depth Duplex receptacle cover
CKSGV
GFCI receptacle cover
CKSSV
Single (1.438") receptacle cover
Two duplex receptacle cover
2CKD 2CKDG
Medium Horizontal Cover 31⁄4" Internal Depth
®
CKSDV
Description
Red•Dot
Cat. No.
Duplex and GFCI receptacle cover
2CKG
Two GFCI receptacle cover
2CKS
Two single (1.438")receptacle cover
2CKSD
Single (1.438") and duplex receptacle cover
CKMD
Duplex receptacle cover
CKMG
GFCI receptacle cover
2CKSG
CKMS
Single (1.438") receptacle cover
Single (1.438") and GFCI receptacle cover
2CKTD
Toggle and duplex receptacle cover
2CKTG
Toggle and GFCI receptacle cover
2CKTS
Toggle and single (1.438") receptacle cover
Medium Vertical Cover 31⁄4" Internal Depth CKMDV
Duplex receptacle cover
CKMGV
GFCI receptacle cover
2CKTSY
CKMSV
Single (1.438") receptacle cover
Toggle and single (1.745") receptacle cover
2CK1DV*
One duplex vertical receptacle cover
CKMSVL
Single (1.594") receptacle cover
2CK1GV*
One GFCI vertical receptacle cover
2CK1SM*
One single (2.656") receptacle cover, box mount only
2CK1SXL*
One single (2.125") receptacle cover, box mount only
Large Vertical Cover 43⁄4" Internal Depth CKLSVL
Single (1.594") receptacle, cover, box mount only
CKLSVY
Single (1.745") receptacle, cover, box mount only
CKLSVXL
Single (2.125") receptacle, cover, box mount only
2CK1SV*
One single (1.438") receptacle cover
NOTE: Dry-Tite covers packed with gasket and screws. * Can be used to cover one receptacle with an oversized wall opening. ®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H27
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H28
®
Code Keeper Wet Location Covers Single Gang Vertical (Small)
accepts most CKSDV
CKSGV
CKSSV
Medium Vertical Covers
CKMDV
CKMGV
CKMSV
CKMSVL
Red•Dot
®
H Medium Horizontal Covers
CKMD
CKMG
CKMS
Large Vertical Covers
CKLSVL
CKLSVY
CKLSVXL
Two Gang Covers
H28
2CKD
2CKDG
2CKG
2CKS
2CKSG
2CKTD
2CKTG
2CKTS
2CK1DV
2CK1GV
2CK1SM
2CK1SV
2CKSD
2CK1SXL
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H29
Weatherproof Covers – While-In-Use Applications w Ne ucts d Pro
Universal While-In-Use Covers to secure using an external locking device*. Perfect for all outdoor outlets including landscape lighting, lawn equipment, pool/hot tub pumps, and holiday lighting.
T&B’s newest Universal While-In-Use covers keep out moisture and take the hassle and cost out of installation. Single or two-gang kits accommodate up to eight configurations each, and every cover is designed with a method • • • • • • •
Saves You Time – No inserts to slow you down, no labor intensive cutouts. Horizontal or vertical orientation Meets NEC 406.8(B) code requirements Lockable cover design for added security using external locking device High impact UV-resistant polycarbonate base construction Weatherproof, thermoplastic cover with transparent finish Accommodates GFCI, single and duplex receptacles, Toggle switches and single receptacles up to 1.59” diameter • Mounts to a box or the device. All installation screws included. • Great for retrofit applications. Device holes are keyed, so just back out the existing device screws and slip the cover over previously installed screws
H Single Gang Base Options
Universal Nonmetallic While-In-Use Cover Cat. No.
2
3
4* Horizontal
5
6
7
CKNM 2CKNM
Single gang duplex/GFCI/switch/single 1.59 – horizontal or vertical – pad lockable. Two gang duplex/GFCI/switch/single 1.59 – horizontal or vertical – pad lockable.
6 4
®
1
Std. Ctn.
Description
U.L. Listed CSA Certified Cover ships as a vertical GFCI, the industries most commonly used version. * External locking device (such as a padlock) not supplied.
8*
*1.59" diameter fits up to 30 Amp twist lock receptacle.
Two Gang Base Options 5d"
5d"
1
2*
3
4
2f"
4"
4" Single Gang (CKNM)
5**
6**
7
8
*2.125" diameter **1.59" diameter
Fast and Easy Installation. Choose your base plate and secure to the device. Then snap on the lid, and you’re done!
5"
5"
2c"
5"
5"
Two Gang (2CKNM)
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Red•Dot
Vertical
H29
412034.H01 REDDOT 5/7
5/8/03
8:15 AM
Page H30
®
Dry-tite Round Boxes, Extensions & Covers
S-47**
Applications: • Junction for branch conduits. • Spacious, accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices.
Red•Dot
®
H
Features/Benefits: • • • •
Copper-free* aluminum provides increased corrosion resistance. Precision cast and machined surfaces permit safer wire pulling. Clean cover edges provide good gasket sealing. Precision NPT threads allow trouble-free field installation for rigid, IMC or EMT conduit. • Deep slotted stainless steel cover screws for faster installation. • Clear UL and cubic content markings speed approval by inspectors. Standard Materials: • S Boxes - Die cast aluminum alloy A380. • SS-B Cover - Stamped aluminum. • Gaskets: Composition. Standard Finish: • Aluminum lacquer finish. Compliances: • UL Listed. • Federal Spec. W-C-586B. Sample Specifications: • Outlet boxes and covers shall be die cast copper-free* aluminum alloy A380 (“S”). Outlet boxes and covers shall be finished with aluminum lacquer. Outlet boxes and covers shall be Red•Dot Catalog No. _______________
®
*Less than .004 copper content. ** S Boxes - Die cast aluminum alloy A380
H30
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H31
®
Dry-tite Round Boxes, Extensions & Covers Extensions
Boxes Cat. No.
Color
Hub Size
Description
Silver Silver
d" f"
5 outlets, cast mounting lugs, 4 closure plugs
Silver Bronze White Silver Bronze White
d" d" d" f" f" f" d" f"
Cat. No.
Color
Hub Size
Description
Silver Silver
d" f"
4 outlets 4 closure plugs, gasket and screws
Four Outlets, 41⁄8" Diameter
Five Outlets, 41⁄8" Diameter S-47 S-48
SE-47 SE-48
D-PAK * ®
DS-47 DS-47-BR DS-47-WH DS-48 DS-48-BR DS-48-WH DS-47-B DS-48-B
with blank cover with blank cover
Seven Outlets, 41⁄8" Diameter Silver
S-71
d"
7 outlets, cast mounting lugs, 4 closure plugs
H Red•Dot
Round Lampholder Covers
®
Standard Covers
Jumbo Covers
Cat. No.
Color
Hub Size
Description
Silver Silver Silver
d" f" d"
One tapped hole One tapped hole Three tapped holes
Silver Bronze White Silver Bronze White
d" d" d" d" d" d"
One tapped hole One tapped hole One tapped hole Three tapped holes Three tapped holes Three tapped holes
Gasket and Screws, 41⁄8" Diameter S-1-RD S-12 S-3-RD S-1
S-12
Cat. No.
Color
Hub Size
Description
Gasket and Screws, 41⁄2" Diameter SJ-11
Silver
d"
One tapped hole
SJ-21
Silver
d"
Two tapped holes
SJ-31
Silver
d"
Three tapped holes
D-PAK * ®
DSS-1 DSS-1-BR DSS-1-WH DSS-3 DSS-3-BR DSS-3-WH
S-3
ROUND BLANK COVERS Cat. No.
Color
Description
SS-B
Silver
Weatherproof cover with gasket and screws
41⁄8" Diameter
Cat. No.
Color
Description
CCRSB
White
Mounting holes 2f" on center (not Raintight)
CCRB
White
Mounting holes 3d" on center (not Raintight)
5" Diameter
NOTE: Boxes are Raintight when used with appropriate Red•Dot boxes. All covers packed with gasket and screws. * See Pages H48-H50 for complete D-PAK assortment ®
®
D-PAK * ®
DCCRB
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
White
H31
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H32
®
Dry-tite Round Boxes, Extensions & Covers Outlet Boxes, Extensions and Covers
SE-47 SE-48
S-47 S-48
S Series Cat. No.
Red•Dot
®
H
S-47 SE-47 S-71 S-48 SE-48 SS-B S-1 S-12 S-3 SJ-B SJ-11 SJ-21 SJ-31
H32
Hub Size
A
B
C
D
E
F
G
H
CI
d" d" d" f" f"
4a 4a 4a 4a 4a 4a 4a 4a 4a 4d 4d 4d 4d
1e 1e 1e 1e 1e Y 1p c 1h c c 1 1
f 1i f g 1i
5l
4n 4n 4n
3a 3h 3a 3a 3h
1b
5l 5l
3d 3d 3d 3d 3d
17.0 18.3 16.3 17.0 18.3
d" f" d" d" d" d"
1b 1b
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H33
®
Dry-tite Lampholders, Garden Lights & Accessories
L-80
L-80-D
L-800
Applications: • Security and general outdoor lighting fixture for residential and commercial applications. • Accent lighting fixture for highlighting outdoor signs and architectural details. • Compact outdoor lighting fixture which can be mounted easily in most places and can be aimed in any direction.
Heat resistant gasket Porcelain socket Corrosion resistant metal
Features/Benefits:
H Locking arm
®
Standard Materials: • Fixture: Certified die cast zinc alloy ZAMAK 3. • Gasket: Heat resistant composition or high-temperature silicone. • Socket: Center contact, porcelain, medium base. Standard Finish:
Ground screw
• Aluminum lacquer finish. • Chrome plated zinc. Compliances • UL Listed. • Suitable for use in Wet Locations. Sample Specifications: • Lampholders shall be certified die cast zinc alloy ZAMAK 3. Lampholder will have positive locking mounting arm and replaceable socket. Fixture shall be Red•Dot Dry-tite . Catalog No. _______________for use with _______________ watt incandescent lamp. ®
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Red•Dot
• Clean lines and precision manufacturing result in a fixture which will enhance any application. • High-quality replaceable porcelain socket with hightemperature leads allow for easy field maintenance. • Positive locking mounting arm keeps fixture in aimed position to reduce costly call-backs. • Ground screw boss in arm.
H33
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H34
®
Dry-tite Lampholders, Garden Lights & Accessories Lampholders, Die Cast Zinc Zamak 3
Decorative Floodlight
Cat. No.
Color
Lamp Max.
Description
L-80
Silver
150W• PAR 38 or R40
Inside gasket and ground screw
Standard
D-PAK * DL-80 DL-80-BR DL-80-WH
Silver Bronze White
L-80-D
Silver
Cat. No.
Color
Lamp Max.
Description
2L80D2
White
150W• PAR 38 or R40
Two lampholders round cover, inside gaskets and ground screws
®
D-PAK * D2L80S3 Silver ®
Portable Spotlights
Gasketed 150W• PAR 38 or R40
Heavy duty slip-on gasket and ground screw
150W • PAR 38 or R40
Cat. No.
Color
Lamp Max.
Description
K702
Silver
150W• PAR 38 or R40
Standard lampholder, ground spike, wall bracket, gasket, and screws
Inside gasket and ground screw
K780
Silver
150W• PAR 38 or R40
Deep-shielded lampholder, ground spike,wall bracket, gasket, and screws
Mounts to L-80 series lampholders
Compact Quartz Fixture
Deep-Shielded L-800
Red•Dot
®
H Wireguard LG-80
Cat. No.
Color
Lamp Max.
Description
HV-250-CFBR
Bronze
250W• Minican T4 quartz
Mighty Light Heavy duty fixture includes mounting plate, wire nuts, and lamp ®
Lampholder Covers
Single Gang Lampholder Covers
LC-11
Cat. No.
Cat. No.
Standard (2m" x 4d") LC-11
Jumbo (3a" x 5a") LF11
Size
d"
LC-21
___
d"
LC-31
LF31
d"
Cat. No.
Color
Size
Round Lampholder Covers Description
One hole Device mount Two hole Device mount Three hole Device mount
Description
S-1, SJ-11, S-12
SJ-21
LC-21
D-PAK * DLC-31
Silver
d"
DLC-31-BR
Bronze
d"
DLC-31-WH
White
d"
®
LC-31
H34
Three hole Device mount Three hole Device mount Three hole Device mount
S-3, SJ-31
Cat. No.
Cat. No.
Size
Description
Standard (4a" diameter) S-1-RD S-12 -S-3-RD
Jumbo (4d" diameter) SJ-11 -SJ-21 SJ-31
d" f" d" d"
One hole One hole Two holes Three holes
Cat. No.
Color
Size
Description
D-PAK * DSS-1 DSS-1-BR DSS-1-WT DSS-3 DSS-3-BR DSS-3-WT
Silver Bronze White Silver Bronze White
d" d" d" d" d" d"
One hole tapped One hole tapped One hole tapped Three tapped holes Three tapped holes Three tapped holes
®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H35
®
Dry-tite Lampholders, Garden Lights & Accessories
LC-11
LF-11
LC-31
LF-31
H SS-B SE-47 SE-48
S-3
SJ-B
SJ-11
SJ-21
SJ-31
Red•Dot
S-47 S-48
S-1 S-12
®
Dimensions in Inches Cat. No. S-47 SE-47 S-71 S-48 SE-48 SS-B S-1 S-12 S-3 SJ-B SJ-11 SJ-21 SJ-31
Hub Size
A
B
C
D
E
F
G
H
CI
d" d" d" f" f"
4a 4a 4a 4a 4a 4a 4a 4a 4a 4d 4d 4d 4d
1e 1e 1e 1e 1e 3⁄64 c c 1 c c 1 1
f 1i f g 1i
5l
4n 4n 4n
3a 3h 3a 3a 3h
1b
5l 5l
3d 3d 3d 3d 3d
16.0 18.3 16.0 16.0 18.3
d" f" d" d" d" d"
CCRB
1b 1b
CCRSB
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H35
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H36
®
Dry-tite Lampholders, Garden Lights & Accessories Photometrics Photometrics are strictly a function of the lamp used.
L-80
L-800
Red•Dot
®
H
Mighty Lights
®
*Photometrics: Beam Spread Horizontal & Vertical 89º x 66º
HV-250-CFBR
*Data based on 250 Watt, T-4 quartz lamp rated 4850 lumens and is applicable to HV-250-CFBR fixture.
FOOT CANDLE FORMULA CANDELA LIGHT VALUE IN FOOT CANDLES = DISTANCE2 AT A GIVEN DISTANCE FROM BULB
H36
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H37
®
Dry-tite Lampholders, Garden Lights & Accessories
K330
K440
Applications: • Lighting for walkways, paths or driveways. • Accent lighting for garden and terrace areas. • Ground level security lighting. Features/Benefits: • Certified zinc alloy provides increased corrosion resistance. • High quality replaceable porcelain socket with high temperature leads allows for easy field maintenance.
H Red•Dot
Standard Materials:
®
• Fixture: Die cast zinc alloy ZAMAK 3. • Globe: Lime crystal glass. • Socket: Center contact, porcelain, medium base. Standard Finish: • Green aluminum lacquer finish. • Bronze aluminum lacquer finish. Compliances: • UL Listed. • Suitable for use in Wet Locations. Sample Specifications: • Fixture shall be certified die cast zinc alloy ZAMAK 3. Socket shall be porcelain, center contact and replaceable. Socket shall have extended leads for easy wiring. Fixture shall be Red•Dot Dry-tite Catalog No. _______________ ®
®
®
Dry-tite Garden Lights
Three Tier Cat. No. K330 K330BR
Four Tier Color Silver Bronze
Lamp Max. 75W•
Description 12" extended leads, gasket and ground screw
Cat. No. K440 K440BR
Color Silver Bronze
Lamp Max. 100W•
Description 12" extended leads, gasket and ground screw
• Lamp not included * See Pages H48-H50 for complete D-PAK assortment ®
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H37
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H38
®
Dry-tite Lampholders, Garden Lights & Accessories Garden Lights
K330
Red•Dot
®
H
K440
Photometrics: Based on lamp center 24" above ground
Based on 100 Watt A-19 inside frosted 1750 lumen lamp. For other wattage see table below. Wattage 100 75 60 50 40 25
Multiplier 1.0 .68 .44 .27 .26 .13
Iso Foot Candles
H38
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H39
®
SiteLight Overview ®
Step up to SiteLight Line Voltage Outdoor Lighting
Planning your Outdoor Lighting
We’ve Made Installation Easy Everything you need is included in the SiteLight Kit except a bulb, supply cable and tools (screwdriver, wire strippers, etc.). Only three connections are required to wire each fixture to the supply cable. With SiteLight’s PVC in-ground mounting tube, there is no need to pour concrete to secure the fixtures. Just position the tube and pack ®
Grazing from side or bottom to show texture
Uplighting from below makes details stand out
Silhouetting from behind provides drama
For decks, Post Sconce Lights mounted on deck posts provide glare-free perimeter lighting and mid-stair lighting. Post Top Lights are ideal for lighting stairs and rails. Use SiteLight Path Lights and Swivel Lights for pathways, driveways and general garden lighting. The chart below will help you determine fixture spacing. Bright & Even
Medium Dappled
Soft Mood
8' - 10'
12' - 18'
Over 20'
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
SiteLight Meets Every Outdoor Lighting Need • From soft, indirect deck lighting to brilliant, focused spot lighting, use SiteLight to beautify any property while enhancing safety and security. • Lighting for walkways, pathways, and driveways. • Stairway, perimeter, and task lighting for decks. • Accent and ambient lighting for pool/patio and garden areas. • Highlighting to emphasize landscape details or specific objects. • Ground level safety/security lighting to illuminate dark areas.
dirt around it. Attach your SiteLight to the mounting tube and your installation is complete. Even tapping a power source is easy when you use SiteLight’s Outside Outlet Power Hook-Up Kit (K800). SiteLights are designed for a lifetime of trouble free use. SiteLight is high quality, permanent lighting built to add value and beauty to your home.
H39
H
®
Compare SiteLight to Low Voltage Sets • SiteLight is up to 5 times brighter than low voltage - more light with fewer fixtures than with low voltage sets. • SiteLight gives you flexibility in spacing, the number of fixtures, and the length of run. Light where you need it. Low voltage sets have
a fixed limit on length of run and the number of fixtures. • SiteLight uses regular household current - no expensive low voltage transformer to purchase or replace. • SiteLight uses readily available, standard bulbs. Low voltage bulbs are often found only where sets are sold. • SiteLight lets you add on fixtures by tapping into run. Low voltage sets will generate even less light if transformers are at capacity. SiteLights are permanent, all metal fixtures guaranteed for a lifetime.
Red•Dot
On graph paper outline your home and grounds. Indicate key features you wish to highlight such as stairways, statuary, shrubbery or flowering plants. SiteLight Spot Lights and Swivel Lights provide focused illumination to showcase these areas. The diagrams below show how you can achieve 3 special lighting effects with SiteLight Spot Lights and Swivel Lights.
For outdoor lighting, nothing compares to the full power (120V) and beauty of SiteLight. SiteLight uses regular household voltage and standard bulbs that are readily available. There are no expensive transformers to purchase or replace. With SiteLight, you can add fixtures when and where you want them and still enjoy lighting that is up to five times brighter than low voltage. Use SiteLight to highlight gardens, statuary, shrubbery and to effectively light decks, stairs, pathways, pools and driveways. SiteLight meets every outdoor lighting need... from soft, indirect deck lighting to brilliant, focused spot lighting. Use SiteLight to beautify your property while enhancing safety and security. Step up to SiteLight line voltage outdoor lighting and add permanent value to your home.
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H40
®
SiteLight Lampholders, Garden Lights & Accessories
K811BR
K822BR
K841BR
K861BR
Applications: • Lighting for walkways, pathways, and driveways. • Stairway, perimeter, and task lighting for decks. • Accent and ambient lighting for pool/patio and garden areas. • Highlighting to emphasize landscape details or specific objects. • Ground level safety/security lighting to illuminate dark areas.
Red•Dot
®
H
Features/Benefits: • Copper-free* aluminum construction provides increased corrosion resistance. • Sturdy die cast aluminum construction provides durability. • Architectural bronze color blends into landscape and deck areas. • High quality, replaceable porcelain socket with brass screw shell (except K851BR, K852BR). • Aluminum mounting tube cap houses and protects wire connection (ground installed fixtures). • PVC ground tube provides an innovative installation method saving costly labor and traditional installation materials (ground installed fixtures). • Wire connectors and ground wire allow safe, easy power connections. • Tempered glass lens and silicon gaskets keep socket dry (K831BR, K841BR, K861BR). • Positive locking arm can be adjusted to the desired position (K831BR, K841BR, K861BR). • Fixtures use regular household voltage (120V) and standard indoor bulbs. Standard Materials: • Fixture: Die cast aluminum alloy A360 with less than .004 copper content (copper-free). • Lens: Tempered glass (K831BR, K841BR, K861BR). • Lens: Polycarbonate (K811BR, K812BR, K821BR, K822BR, K851BR). • Socket: Porcelain, center contact, brass screw shell, medium base (K811BR, K812BR, K821BR, K822BR, K831BR, K841BR, K861BR), molded plastic socket with candelabra base (K851BR and K852BR). • Mounting Tube: Gray PVC, schedule 40 (ground installed fixtures). Standard Finish: • Bronze aluminum lacquer finish.
K851BR
K852BR
Quality Construction
Rustproof cast aluminum Top removes easily for bulb replacement
Shatterproof Lens
Porcelain Socket with brass screw shell
Architectural Bronze color blends into landscape
Aluminum Base for durability
Stainless Steel Screws
Aluminum Mounting Tube Cap houses wire connections
Wire Connectors and Ground Wire for safe, easy power connections 13" PVC Mounting Tube provides a permanent base for fixture and large opening to feed wires
Compliances: • UL Listed. • Suitable for use in Wet Locations. • Ground mounting (suitable for use 4' or less above grade level) except K852BR and K861BR. Sample Specifications: • Fixture shall be die cast copper-free* aluminum alloy A360, with bronze aluminum laquer finish. Sockets shall be porcelain, center contact, brass screw shell-medium base for K811BR, K812BR, K821BR, K822BR, K831BR, K841BR and K861BR fixtures. Sockets shall be molded plastic with candelabra screw base for K851BR and K852BR fixtures. All sockets shall have extended leads for easy wiring. *Less than .004 copper content.
H40
Easy to Install: • Only 3 wire connections per fixture are required. • No need to pour concrete. • All connections are made above ground.
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H41
®
SiteLight Lampholders, Garden Lights & Accessories
Distance in inches of mounting height
10.8
10
5
ISO Foot Candles Values based on .45 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp.
2
10 5.4 10 20
0 1
7.5" Path Light Cat. No.
Description
Lamp Required
Spacing
.5
7.5" Path Light with 13" x 2" schedule 40 PVC mounting tube
K811BR
5.4 10.8
A15 40W(max) / 120V medium base
16.2
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
21.6 0
5.4
10.8 16.2 21.6 27 32.4 Distance in inches of mounting height
37.8
7.5" Path Light
K811BR
16.08
5
2
1
Distance in inches of mounting height
5
8.04 5 10
ISO Foot Candles Values based on .67 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp.
0
10" Path Light Cat. No.
Description
Lamp Required
Spacing
.5
K812BR
8.04 16.08
10" Path Light with 13" x 2" schedule 40 PVC mounting tube
A15 40W(max) / 120V medium base
24.12
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
36.16 0
8.04
H
16.08 24.12 32.16 40.2 48.24 Distance in inches of mounting height
10.8
5
2
Distance in inches of mounting height
ISO Foot Candles Values based on .45 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp.
0 1
7.5" Dome Path Light Cat. No.
Description
®
10 10
5.4 10
Red•Dot
10" Path Light
K812BR
Lamp Required
Spacing
.5
K821BR
5.4 10.8
7.5" Path Light with 13" x 2" schedule 40 PVC mounting tube
A15 40W(max) / 120V medium base
16.2
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
21.6 0
5.4
10.8 16.2 21.6 27 32.4 Distance in inches of mounting height
37.8
7.5" Dome Path Light
K821BR
16.08
2
5
1
Distance in inches of mounting height
5
8.04 0
5 5
ISO Foot Candles Values based on .67 ft. mounting height and a 40 Watt A15 clear 400 lumen lamp. .5
10" Dome Path Light Cat. No.
Description
Lamp Required
Spacing
.2
K822BR
8.04 16.08
7.5" Path Light with 13" x 2" schedule 40 PVC mounting tube
A15 40W(max) / 120V medium base
24.12
8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood.
36.16 0
8.04
16.08 24.12 32.16 40.2 48.24 Distance in inches of mounting height
56.28
10" Dome Path Light
K822BR
ISO Foot Candles Values based on 3 ft. setback from a vertical wall and a 100 Watt incandescent 1321 lumen lamp.
Distance in inches of mounting height
216 .02
.05
180 .1
144
Ground Spot Light Cat. No.
Description
Lamp Required
Spacing
.2
K841BR 108
.5 1
Ground Spot Light with 13" x 2" schedule 40 PVC mounting tube
72 2
One to two for each object to be highlighted or as required for special lighting effects.
.002
5
36
R20 100W(max) / 120V medium base
.005
10 .01
0 0
K841BR
36
72 108 144 180 216 Distance in inches of mounting height
Ground Spot Light
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H41
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H42
®
SiteLight Lampholders, Garden Lights & Accessories ISO Foot Candles Values based on 1ft. mounting height and a 60 Watt A15 incandescent 740 lumen lamp tilted 45˚ degrees.
24 Distance in inches of mounting height
.2
2
.5
12 1 20
Description
Lamp Required
Spacing
0 50
K831BR
12
10 5
.5
24
17.5" Swivel Light with 13" x 2" schedule 40 PVC mounting tube
General lighting: A15 60W(max) / 120V medium base Spot lighting: R16 60W(max) / 120V medium base
1
36 .01
.2 .05
.1
.02
48 0
12
24 36 48 60 72 Distance in inches of mounting height
84
General lighting: 8' - 10' apart: bright and even, 12' - 18' apart: medium dappled 20' or more: soft mood. Spot lighting: one to two for each object to be highlighted
17.5" Swivel Light
K831BR
ISO Foot Candles Values based on 1ft. mounting height from light opening of luminaire to ground stair and a 10 Watt G121/2 80 lumen lamp on lens 1ft. above ground or stair.
Distance in inches of mounting height
24 .002.005
H
17.5" Swivel Light Cat. No.
12
.2 .5
0
K851BR
2
5
Post Sconce Light Cat. No.
12 1
Description
Lamp Required
Post Sconce Light with metal back plate, and mounting hardware
Spacing
G12d 10W(max) / 120V candelabra base
On each post or every other post, depending on desired brightness. Mounts to standard 4X4 post.
.05
.1
.001
.02 .01
24
.005
36 .002 .001
48
12
24 36 48 60 72 Distance in inches of mounting height
84
Post Sconce Light
K851BR
ISO Foot Candles Values based on 4 ft. mounting height from center of light opening to base of deck and a 15 Watt G161/2 100 lumen lamp.
Distance in inches of mounting height
96 .05
48
Post Top Light Cat. No.
Description
Lamp Required
Spacing
0
48
.05 .02
96
K852BR
.05 .05
.05
Post Top Light with metal back plate, and mounting hardware
G16d 15W(max) / 120V candelabra base
On each post or every other post, depending on desired brightness. Mounts to standard 4X4 post.
.02 .01 .005
144 .002 .001
.0005 .0002
192 .0001 0 48
96 144 192 Distance in inches of mounting height
Post Top Light
K852BR
192
ISO Foot Candles Values based on 8 ft. mounting height and a 100 Watt 1321 lumen lamp tilted 45˚ degrees.
.05
.02
.2
Distance in inches of mounting height
Red•Dot
®
0
96 .1
0
96
.5 .1
K861BR
.1
192
.05
Description Wall Spot with cover, (box not included)
Lamp Required
Spacing
R20 100W(max) / 120V medium base
One to two on most average size decks or exterior walls.
.02
288
.01 .001
.002
384 .0005 96
K861BR
Wall Spot Cat. No.
.005
192 288 384 480 576 Distance in inches of mounting height
672
Wall Spot
Outside Outlet Power Hook-up Kit
H42
Cat. No.
Finish
K800
Silver
Description Outside Outlet Power Hook-up Kit with ground wire, ground screw and five close-up plugs
Hub Size f”
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
No. of Outlets Top Bottom Side Side
2 2 1 1
Total
6
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H43
®
Site-light Lampholders, Garden Lights & Accessories K811BR
Zonal Lumen Summary
5b" 3a"
5b"
Zone Deg 1b" 2j"
1h"
d
7"
7d"
Lumens
3.6 6.2 17.1 80.7 17.4 18.3 19.3 19.3 100.0
Total Luminaire Efficiency = 37.4%
0 2 3 4 5 11 28 33 34 21 3 2 1 1 1 0 0 0 -
ISO Foot Candles Values based on .45 (5.4") foot mounting height and a 40 watt A15 clear 400 lumen lamp (10.8")
10
5
2
10 10
(5.4") 20
0
1
.5
H
(5.4")
(10.8")
(16.2")
®
4 4 6 7 6 7 11 30 31 32 30 24 3 2 2 1 1 0 0 0 0
1.4 2.3 6.4 30.2 6.5 6.8 7.2 7.2 37.4
Red•Dot
Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
% of total output
5 9 26 121 26 27 29 29 150
Distance in Units of Mounting Height
13a"(±b)
Deg
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens
% of lamp output based on 400 lumens
(21.6") (5.4")
(10.8")
(16.2")
(21.6")
(27")
(32.4")
(37.8")
Distance in Units of Mounting Height
K812BR
5b" 3a"
5b"
Zonal Lumen Summary 1b" 2j"
Zone Deg
1h" 10" 10"
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens
% of lamp output based on 400 lumens
% of total output
1.4 2.3 6.4 30.2 6.5 6.8 7.2 7.2 37.4
3.6 6.2 17.1 80.7 17.4 18.3 19.3 19.3 100.0
5 9 26 121 26 27 29 29 150
Total Luminaire Efficiency = 37.4% Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
4 4 6 7 6 7 11 30 31 32 30 24 3 2 2 1 1 0 0 0 0
ISO Foot Candles Values based on .67 (8.04") foot mounting height and a 40 watt A15 clear 400 lumen lamp
Lumens 0 2 3 4 5 11 28 33 34 21 3 2 1 1 1 0 0 0 -
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
(16.08")
Distance in Units of Mounting Height
13a"(±b)
Deg
5
2
1
5 5
(8.04") 10
0
.5
(8.04")
(16.08")
(24.12")
(36.16") (8.04") (16.08") (24.12") (36.16") (40.2") (48.24")
Distance in Units of Mounting Height
www.tnb.com
H43
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H44
®
SiteLight Lampholders, Garden Lights & Accessories 4l" 3a"
K821BR
Zonal Lumen Summary % of lamp output based on 400 lumens
4b"
Zone Deg
1 2j" 1h"
7d"
7d"
®
Red•Dot
Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
2 2 3 4 4 6 10 29 31 31 22 3 1 1 0 0 0 0 0 0 0
K822BR
Lumens
% of total output
0.7 1.3 4.8 27.8 1.5 1.6 1.6 1.6 29.4
2.4 4.5 16.3 94.6 5.2 5.4 5.4 5.4 100.0
Total Luminaire Efficiency = 29.4%
0 1 2 2 4 10 27 32 33 4 1 1 0 0 0 0 0 0 -
ISO Foot Candles Values based on .45 (5.4") foot mounting height and a 40 watt A15 clear 400 lumen lamp 10
(10.8")
5
2
10
(5.4")
10
1
0
.5
(5.4")
(10.8")
(16.2")
(21.6") (5.4")
(10.8")
(16.2")
(21.6")
(27")
(32.4")
(37.8")
Distance in Units of Mounting Height
4l"
Zonal Lumen Summary
3a"
4b"
3 5 19 111 6 6 6 6 118
Distance in Units of Mounting Height
H
13a"(±b)
Deg
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens
% of lamp output based on 400 lumens
1
Zone Deg
2j" 1h" 10"
10"
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens 3 5 19 111 6 6 6 6 118
% of total output
0.7 1.3 4.8 27.8 1.5 1.6 1.6 1.6 29.4
2.4 4.5 16.3 94.6 5.2 5.4 5.4 5.4 100.0
Total Luminaire Efficiency = 29.4%
H44
Candela
0 5 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180
2 2 3 4 4 6 10 29 31 31 22 3 1 1 0 0 0 0 0 0 0
Lumens 0 1 2 2 4 10 27 32 33 4 1 1 0 0 0 0 0 0 -
ISO Foot Candles Values based on .67 (8.04") foot mounting height and a 40 watt A15 clear 400 lumen lamp (16.08")
Distance in Units of Mounting Height
13a"(±b)
Deg
5
2
1
5
(8.04") 5 5
0
.5
.2
(8.04")
(16.08")
(24.12")
(36.16") (8.04") (16.08") (24.12") (32.16") (40.2") (48.24") (56.28")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H45
®
SiteLight Lampholders, Garden Lights & Accessories K831BR
5"
General Lighting Zonal Lumen Summary
3a" 2d"
Zone Deg
Lumens
% of lamp output based on 740 lumens
0-30 0-40 0-60 0-90 90-180 0-180
65 105 134 137 0 137
8.7 14.2 18.1 18.5 0.0 18.5
3a" Dia.
5"
1d"
14e"
ISO Foot Candles Values based on 1 (12") foot mounting height and a 60 watt A15 incandescent 740 lumen lamp tilted 45°
2 j" 1
79 81 82 73 67 33 4 3 0 0 0
(24")
8 23 34 41 25 3 3 0 0 -
.2
13a"(±b)
2
.5
1
(12")
20
0
H
50
(12")
10 5 .5
(24")
1
(36")
.01
.2
®
Distance in Units of Mounting Height
3h" Dia.
Lumens
Red•Dot
Candela
0 5 15 25 35 45 55 65 75 85 90
47.2 77.0 97.7 100.0 0.0 100.0
Total Luminaire Efficiency = 18.5%
b"
Deg
% of total output
.05
.1
.02
(48")
(12")
(24")
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
Spot Lighting Zonal Lumen Summary
3a"
Zone Deg
5"
d"
Lumens
% of lamp output based on 299 lumens
% of total output
39 68 111 116 0 116
12.9 22.8 37.2 38.7 0.0 38.7
33.5 58.9 96.2 100.0 0.0 100.0
0-30 0-40 0-60 0-90 90-180 0-180
Total Luminaire Efficiency = 38.7% ISO Foot Candles Values based on 1 (12") foot mounting height and a 40 watt R16 incandescent 299 lumen lamp tilted 45°
b" 2 j" 1
Candela
0 5 15 25 35 45 55 65 75 85 90
45 45 45 47 47 38 16 4 0 0 0
(24")
Lumens Distance in Units of Mounting Height
Deg
4 13 22 29 29 14 4 0 0 -
(12")
.2
.510 2
20 1
0
(12") 5
(24") 1 .1
.5
(36") .2
(48")
.005 .01 .02
(12")
.05
(24")
.1
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H45
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H46
®
SiteLight Lampholders, Garden Lights & Accessories Zonal Lumen Summary K841BR
Zone Deg
Lumens
% of lamp output based on 1321 lumens
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
104 165 214 219 0 0 0 0 219
7.9 12.5 16.2 16.6 0.0 0.0 0.0 0.0 16.6
3a" 3a" Dia.
5e"
6e" l" 3f"
% of total output 47.7 75.3 97.7 100.0 0.0 0.0 0.0 0.0 100.0
b"
Total Luminaire Efficiency = 16.6%
3h" Dia.
1i"
ISO Foot Candles Values based on 3 (36") foot setback from a vertical wall and a 100 watt incandescent 1321 lumen lamp
2 j" 1
Candela Distribution Horizontal Degrees 0.0 45.0 90.0 135.0 180.0 FLUX 136 132 124 121 77 12 6 1 0 0 0
136 133 125 117 106 35 9 4 0 0 0
136 136 128 126 125 93 14 6 2 0 0
136 138 131 122 122 109 31 8 3 1 1
(216")
13 36 56 61 37 11 4 1 0 -
Red•Dot
®
H
136 132 127 124 58 9 5 0 0 0 0
Distance in Units of Mounting Height
Vertical Degrees
13a"(±b)
0 5 15 25 35 45 55 65 75 85 90
Legend 0-deg: 90-deg: 180-deg:
Note: This iso footcandle diagram was produced by tilting the photometric data for this luminaire 45• above horizontal
.02
.05
(180") .1
(144")
.2
(108")
.5 1
(72") 2 5
(36")
10
0
.01
(36")
(72")
.005 .002
(108")
(144")
(180")
(216")
Distance in Units of Mounting Height
K851BR Zonal Lumen Summary 3c"
37°
3b"
Zone Deg 1c" 3c"
3c"
Lumens
0-30 0-40 0-60 0-90 90-180 0-180
% of lamp output based on 80 lumens
% of total output
4.5 7.7 11.0 11.6 0.0 11.6
38.7 66.3 94.3 100.0 0.0 100.0
4 6 9 9 0 9
1l"
Total Luminaire Efficiency = 11.6%
0°
ISO Foot Candles Values based on 1 (12") foot mounting height from light opening of luminaire to ground stair and a 10 watt G12 80 lumen lamp on lens 1 foot above ground or stair
0 5 15 25 35 45 55 65 75 85 90
5 6 6 7 7 6 0 0 0 0 0
5 6 6 7 7 5 1 0 0 0 0
5 6 6 6 6 3 1 0 0 0 0
5 5 2 1 1 1 1 0 0 0 0
5 3 0 0 0 0 0 0 0 0 0
d
0 1 2 3 2 1 0 0 0 -
(24")
Legend 0-deg: 90-deg: 180-deg:
Distance in Units of Mounting Height
Vertical Degrees
Candela Distribution Horizontal Degrees 0.0 45.0 90.0 135.0 180.0 FLUX
.002 .005
(12")
.2 .5
0 5
(12")
1 .1
(24")
2
.05 .001 .02 .01 .005
(36") .002
(48")
.001
(12")
(24")
(36")
(48")
(60")
(72")
(84")
Distance in Units of Mounting Height
H46
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H47
®
SiteLight Lampholders, Garden Lights & Accessories K852BR
Zonal Lumen Summary 5a" Dia.
Zone Deg
Lumens
% of lamp output based on 100 lumens
0-30 0-40 0-60 0-90 90-180 0-180
1 1 5 10 0 10
0.9 1.3 5.5 10.4 0.0 10.4
5"
e"
4c"
4c"
1b"
3c" SQ.
% of total output 8.7 12.8 52.7 100.0 0.0 100.0
Total Luminaire Efficiency = 10.4% ISO Foot Candles Values based on 4 (48") foot mounting height from center of light opening to base of deck and a 15 watt G16d 100 lumen lamp
0 5 15 25 35 45 55 65 75 85 90
1 2 1 1 1 1 5 6 0 0 0
1 1 1 1 1 1 3 5 0 0 0
1 1 1 1 1 1 3 5 0 0 0
1 1 1 1 1 1 4 5 0 0 0
1 1 1 1 1 1 6 7 0 0 0
0 0 0 0 1 4 5 0 0 -
(96") .2 .05
Distance in Units of Mounting Height
Vertical Degrees
Candela Distribution Horizontal Degrees 0.0 22.5 45.0 67.5 90.0 FLUX
0 .05 .05
H
.02
(48")
.05
.05
(96")
.02 .01 .005 .002 .001 .0005
(144")
Red•Dot
.0
.0002 .0001
(192")
®
Legend 0-deg: 45-deg: 90-deg:
(48")
(48")
(96")
(144")
(192")
Distance in Units of Mounting Height
K861BR
Zonal Lumen Summary
3a" 5k"
Lumens
% of lamp output based on 1321 lumens
% of total output
103 177 301 317 0 317
7.8 13.4 22.8 24.0 0.0 24.0
32.4 56.0 94.9 100.0 0.0 100.0
2d"
Zone Deg 3 / " Dia. 4
8
5k"
3a" Dia.
l"
0-30 0-40 0-60 0-90 90-180 0-180
Total Luminaire Efficiency = 24.0%
b" 2n"
0 5 15 25 35 45 55 65 75 85 90
Candela 128 128 123 120 119 109 44 11 5 0 0
ISO Foot Candles Values based on 8 (96") foot mounting height and a 100 watt 1321 lumen lamp tilted 45°
Lumens 12 35 56 75 83 41 11 5 0 -
(192") .2
Distance in Units of Mounting Height
Deg
.05 .02 .2
(96") 1
0
(96")
.5 .1 .1
(192")
.05 .02
(288")
.01 .001
(384") .0005
.005
.002
(96")
(192")
(288")
(384")
(480")
(576")
(672")
Distance in Units of Mounting Height
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H47
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H48
®
D-Pak Merchandising System
DALB
DIH3-1-LM
DCCD
D2L80S3
Applications: • Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in Dry, Damp and Wet Locations. • Junction for branch conduits. -“A” Series bodies for Rigid and Intermediate Metal Conduit (IMC) conduit maintain a weather resistant conduit system when used with covers and gaskets. -“B” Series bodies for thin wall conduit Electrical Metallic Tubing (EMT) saves cost of connector and labor in indoor applications. • Accessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make splices. ®
Red•Dot
®
H
Features/Benefits: • Combination packaging of conduit body, cover and gasket reduces handling and inventory costs. • Selection of colored finishes - silver, bronze and white - match most widely used finishes in commercial and residential construction. • Reduced quantities in easy-to-store cartons. Saves labor and handling, reduces error and handling costs. • Bar coding on carton and product. • See-through wrapper provides instant identification and protects product on job site. • Easy to read labels speeds selection, handling and storage.
Easy to read descriptive labels
Label shows actual product color
Labor saving 2 piece carton
Combination pack of conduit body, cover & gasket
Choice of silver, bronze or white finish
Protective see-through shrink wrap
Standard Materials: • Refer to appropriate section in this catalog. Standard Finish: • Aluminum lacquer finish. • Colors - Silver, Bronze & White. Compliances: • UL Listed. • CSA Certified. • Federal Spec. W-C-586.
H48
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H49
®
D-Pak Merchandising System ®
The D-PAK Merchandising System attracts attention with bold graphics and encourages self-service with clean, easy-to-read labels. • Bold red, black, and white descriptive merchandising labels. • Labor saving 2-piece carton. • Combination pack of conduit body, cover and gasket. • Choice of finish: silver, bronze or white. • English, Spanish, and French instructions. • Protective see-through wrap.
Boxes Single Gang - with mounting lugs, two plugs and ground screw
Cat. No.
Hub Size
Color
Outlets
DIH3-1-LM DIH3-1-LM-BR DIH3-1-LM-WH DIH3-2-LM DIH3-3-LM
d" d" d" f" 1"
Silver Bronze White Silver Silver
Top 1 Bottom 1 Back 1 Total 3
DIH4-2-LM DIH4-1-LM-BR DIH4-1-LM-WH DIH4-2-LM
d" d" d" f"
Silver Bronze White Silver
Top 2 Bottom 1 Back 1 Total 4
DIH5-1-LM DIH5-2-LM
d" f"
Silver Silver
Top 2 Bottom 2 Back 1 Total 5
Three Outlets
Conduit Bodies with Covers and Gaskets Cat. No.
Rigid IMC
EMT
Hub Size
Through Feed Four Outlets d" f" 1"
Back Opening DALB-1-CG DALB-2-CG DALB-3-CG DALB-4-CG DALB-5-CG DALB-6-CG
DBLB-1-C• DBLB-2-C• DBLB-3-C•
d" f" 1" 1b" 1d" 2"
Five Outlets
Left Side Opening DALL-1-CG DALL-2-CG DALL-3-CG
d" f" 1"
Two Gang - with mounting lugs, two plugs and ground screw Three Outlets D2IH3-1
d"
Silver
Right Side Opening DALR-1-CG DALR-2-CG DALR-3-CG
d" f" 1"
Top 1 Bottom 1 Back 1 Total 3
Round - with cast mounting lugs, four plugs and ground screw Five Outlets T-Style DAT-1-CG DAT-2-CG DAT-3-CG
d" f" 1"
DS-47 DS-47-BR DS-47-WH DS-48 DS-48-BR DS-48-WH
Service Entrance Bodies Cat. No.
d" d" d" f" f" f"
Silver Bronze White Silver Bronze White
Side 4 Bottom 1
Total 5 Hub Size • Body and cover only
Back Opening DASLB-1 DASLB-2 DASLB-3
d" f" 1"
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
H49
®
(Raintight) DAC-1-CG DAC-2-CG DAC-3-CG
H Red•Dot
Cat. No.
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H50
®
D-Pak Merchandising System Device Covers
Lampholders Cat. No.
Color
Description
Duplex receptacle cover, horizontal DCCD Silver DCCD-BR Bronze DCCD-WH White
Device mount
Duplex receptacle cover, vertical DCCDV DCCDV-BR DCCDV-WH
Silver Bronze White
Device mount
GFCI receptacle cover, horizontal. DCCG DCCG-BR DCCD-WH
Silver Bronze White
Device mount
®
Color
Description
DL-80 DL-80-BR DL-80-WH
Silver Bronze White
Inside gasket and ground screw, 150W PAR 38 max. lamp
D2L80S3
Silver
Two lampholders and cover with three d" holes, gasket, screws and plug
Standard
Floodlight
Lampholder Cover
H Red•Dot
Cat. No.
Cat. No. GFCI receptacle cover, vertical DCCGV DCCGV-BR DCCGV-WH
Hub Size
Color
Description
DLC-31 DLC-31-BR DLC-31-WH
d" d" d"
Silver Bronze White
Three d" holes. Supplied with gasket, screws and plug
DSS-1 DSS-1-BR DSS-1-WH DSS-3 DSS-3-BR DSS-3-WH
d" d" d" d" d" d"
Silver Bronze White Silver Bronze White
Single Gang Silver Bronze White
Device mount
Round
Blank Covers Cat. No.
Color
Description
DCCB DCCB-BR DCCB-WH
Silver Bronze White
Device mount
Single Gang
Device mount with gasket, screws and plug
Plugs Cat. No.
Two Gang D2CCB
Silver
Device mount
DCCRB
White
5" round cover with mounting holes 3d" on center (not Raintight)
DPLG-1 DPLG-1-BR DPLG-1-WH DPLG-2
Hub Size
Color
d" d" d" f"
Silver Bronze White Silver
Round
H50
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H51
Kits Kits Cat. No.
Description
Color
CS212 CS212BR CS212WH
Traditional 2 Lamp Round Box Kit
Silver Bronze White
CS228 CS228BR CS228WH
Contemporary 2 Lamp Round Box Kit
Silver Bronze White
CS312 CS312BR CS312WH
Duplex Weatherproof Outlet Device Kit
Silver Bronze White
CS212
H Silver
CS780BR
Contemporary Stake Light w/Cord
Bronze
CS902 CS902BR CS902WH
Traditional 2 Lamp, Round Box w/Photocell Kit
Silver Bronze White
®
GFCI Weatherproof Outlet Device Kit
Red•Dot
CS315
CS228
CS312
CS315
CS780BR
© 2003 Thomas & Betts Corporation. Specifications are subject to change without notice.
CS902
www.tnb.com
H51
412034.H01 REDDOT 5/7
5/8/03
8:16 AM
Page H52
An open and shut case
for meeting the “while-in-use” NEC Code requirement! Need to comply with the new 2002 NEC Code 406.8(B) for weatherproof in-use covers?* No problem! Thomas & Betts has the exact covers you need for compliance, with the brand names you know and trust, Red•Dot and Steel City. • Available in both rugged die-cast aluminum or non-metallic with clear Lexan lids • All feature single-unit convenience for faster, easier installation — no confusing, time-consuming punch-outs • Full range — single gang or double gang • Unique key-lock option Available now from your Thomas & Betts Distributor. ®
Red •Dot
®
Die-cast aluminum, 100% copper-free with integral locking tab.
®
®
Steel City
®
Non-metallic with clear cover. Unique lip design provides water-tight seal. * NEC, Section 406.8(B) (1) 15- and 20-Ampere, 125- and 250-volt receptacles installed outdoors in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted.
Ask your Thomas & Betts sales rep for your free copy of the Thomas & Betts Code Changes 2002.
Steel City • Red•Dot • Superstrut • Union • Bowers ®
®
®
®
®
