REMOTE BALLAST SYSTEM
REMOTE BALLAST SYSTEM SPORTSLITER SOLUTIONS
Features
SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of today’s sports lighting specifications. Each system includes all you need to light a sporting event including pole top crossarms, optics/lamps, poles, wiring harness, electrical enclosures, professional lighting designs and installation help. The remote system crossarms are shipped factory aimed and pre-wired for reliability and cost effective installation. The remote ballast enclosures are pre-wired to a keyed connector so attachment of the factory built wiring harness will complete the electrical connection to the pole top assembly. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location. This engineered system is designed to work together guaranteeing performance and long trouble free operation.
System Components
B) Internal Wiring Harness • Pre-wired to keyed connectors • 100% factory electrically tested • 12 gauge wire • Color coded • Labeled with pole reference C) Direct Embedded Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Corrocote II protective coating (below grade to 6” above) • Ground lug included • Harness support hangers • UL listed
• • • •
Enclosed in flex conduit Kellums cable support grip Matched to pole length UL listed / CSA certified
A
Axial Optic
B
C Horizontal Optic
Anchor Base Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Anchor bolts and templates included • Ground lug included • Harness support hangers Spill/Glare Optic • UL listed
Concrete Poles • Centrifugal Spun • Pre-stressed • System matched to luminaires • Shipped as single piece • Ground lug included • Harness support hangers • Smooth, natural finish D) Remote Ballast Enclosure • Hot-dip Galvanized finish or Lektrocote finished aluminum • Stainless steel latches • Pre-wired to single plug in connector • Individual fusing • Wiring entry • Thermal magnetic or load break switch
100% electrically tested Optional spill / glare control optics Silicone gaskets Lektrocote® painted knuckle Anodal® finished optics Tempered glass lens Stainless steel lens ring Hubbell Gard® treated hardware UL listed / CSA certified
SPORTSLIGHTING
A) Pole Top Crossarm Assembly and Optics • Pre-wired to single connectors • • Factory aimed • • Concealed wiring • • Hot-dip Galvanized steel crossarm • • Die-cast aluminum knuckle • • Re-positioning pin • • Labeled with pole reference • • Labeled with optic type • • Stainless steel mounting bolts •
D
Poles “SGV” Spill/Glare Optic wtih visor
• • • • • • •
Galvanized steel hinges Gasketed Grounding lug Wiring schematic Pole top arraignment drawing Pole location label UL listed / CSA certified
Remote Enclosure
Pole top crossarm assembly
Wiring Harness
Hubbell Lighting
647
INTEGRAL BALLAST SYSTEM SPORTSLITER SOLUTIONS
Features
SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of today’s sports lighting specifications. Each system includes pre-wired pole top crossarms (wired to junction boxes and distribution blocks), pre-wired integral ballast luminaires with optics and lamps, professional lighting designs and installation help. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location.This engineered system is designed to work together guaranteeing performance and long trouble free operation.
SPORTSLIGHTING
System Configuration A) Pole Top Crossarm Assembly • Pre-wired to distribution blocks • Junction box included for wiring connections (hot-dip galvanized) • Hot-dip Galvanized steel crossarm • Mounting hardware included • Labeled with pole reference • Labeled with optic type • Tubular steel crossarms • UL listed / CSA certified B) Integral Ballasted Luminaire • Die-cast aluminum housing • Pre-wired with cord / plug set • Isolated ballast compartment from lamp • Stainless steel lens ring • Silicone gasketing • Filtered optics • Built in lamp support • Isolated wiring chamber • Hubbell Gard™ treated hardware • Lektrocote® polyester powder paint • Horizontal and vertical aiming indicators • Environmental spill/glare control optional C) Direct Embedded Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Corrocote II protective coating (below grade to 6” above) • Ground lug included • Power cord support hangers (cord by others) • UL listed
• • • • • • • •
Steel and concrete pole mounting options Base plate or clamp on mount available 100% electrically tested at factory Strain relief support included Fillet type welds Ground lug included Single phase wired 2-6 luminaires Three phase wired 7-18 luminaires
• • • • •
Mounting hardware included Fast Aim ™ system Repositioning stop Anodal® finished parabolic reflector Thermal shock, impact resistant tempered lens Stainless steel hinge Four point lens latching Aiming sights included UL listed and CSA certified Note, luminaires must be aimed at site
• • • • •
Axial Optic
Horizontal Optic
Spill/Glare Optic
Anchor Base Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Anchor bolts and templates included • Ground lug included • Power cord support hangers (cord by others) • UL listed
“SGV” Spill/Glare optic with visor
Concrete Poles • Centrifugal Spun • Pre-stressed • System matched to luminaires • Shipped as single piece • Ground lug included • Harness support hangers • Smooth, natural finish Poles
648
Hubbell Lighting
SLS SERIES
SPORTSLITER SOLUTIONS
Features SLS series Sportsliter luminaires are ideally suited for recreational, collegiate and professional sporting events where quality levels of illumination and uniformity are required. They are equally suited for large open areas such as parking lots, storage areas and transfer yards. • Die-cast aluminum housing • Fast Aim ™ system • Isolated ballast compartment from • Repositioning stop lamp • Super Sodium™ 600w hot re-strike • Stainless steel lens ring • Anodal® finished parabolic reflector • Silicone gasketing • Thermal shock, impact resistant • Filtered optics tempered lens • Built in lamp support • Stainless steel hinge • Mounting hardware included • Four point lens latching • Isolated wiring chamber • Aiming sights included • Hubbell Gard™ treated hardware • Environmental spill/glare control • Lektrocote® polyester powder paint optional • Horizontal and vertical aiming • Remote ballast system available indicators • UL listed and CSA certified
Ordering Information
Example:
SLS Series
1
Sportsliter Series 1000W Metal Halide 1500W Metal Halide 1650W Metal Halide 600W High Pressure Sodium13 1000W High Pressure Sodium Metal Halide High Pressure Sodium No Ballast (remote head only)2 HPF Regulated, Peak Lead Auto, CWA, Auto Regulated
Watts
-
H
-
Lamp
Beam Distribution12 2 NEMA Type 2 3 NEMA Type 3 4 NEMA Type 4 5 NEMA Type 5 6 NEMA Type 6 N Narrow Beam Horizontal lamp11 M Medium Beam Horizontal lamp11 W Wide Beam Horizontal lamp11 Voltage 5 480V4 6 Tri-Tap® (120, 277, 347V)6 7 600V1 8 Quad Tap® (120, 208, 240, 277V) 0 No Ballast (remote head only)2 E 220/240V 50 Hz3 C 347/480V5
1
-
2
-
Beam Dist.
Ballast
Options -3C(X) -6C(X) -12C(X) -F(X)
-PH -L -HO -SG -SGV
-M51
8 Volts
-
PH Options
3’ Prewired SEOWA Cord (specify voltage)7, 14 6’ Prewired SEOWA Cord (specify voltage)7, 14 12’ Prewired SEOWA Cord (specify voltage)7, 14 Fusing: replace X with 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V fuses incl., externally mtd.8 Protective Heavy-Duty Outer Hull9 Unit with Lamp (shipped separately) High Output 1000 or 1500W MH POM Socket (lamp not included) Spill/Glare Control (internal faceted louver, MH only)10 High end spill/glare control (Internal faceted louver with external visor, metal halide only).10 Bronze Lektrocote® finish
SPORTSLIGHTING
Series SLS Wattage 1000 1500 1650 0600 1000 Lamp Type H S Ballast Type 0
- 1500
1 2
CSA certified only, not UL listed. Remote head units, specify wattage and lamp type to be used H for MH and S for HPS. Example: SLS100H-020. NOTE: 600W HPS may not be remote ballasted. 3 1000 and 1500W MH only. All other wattages and sources consult factory. 4 Except 1650W MH. For 480V 1650W, use C. 5 1650W MH only. 6 600W HPS. Single voltage only (347V). 7 For wire gauge, replace X with 6 - 16/3; 4 - 14/3; or 2 - 12/3. NOTE: 120V 1500W units must use 14/3 or 12/3. 8 To denote voltage, replace X with 1 - 120V; 2 - 208V; 3 - 240V; 4 - 277V; 5 - 480V; 6 - 347V. 9 Hull adds 4 lbs. to total weight - shipped separately except on N/M/W optics (assembled on unit). 10 Internal faceted louvers for beam type N/M/W only. 11 Not available in HPS. Luminaire shipped as completely assembled unit. 12 Units not suitable for up aiming. 13 Lamp included. 14 Specific wire gauge and wiring methods may be required by local or national codes. Consult local inspection agencies for details prior to ordering. Note Order accessories separately.
Hubbell Lighting
649
SLS SERIES DIMENSIONS SPORTSLITER SOLUTIONS
SLS Integrated Ballast C
B
D
B C Aimed 40 degrees below horizontal
A
Aimed 40 degrees below horizontal
A
A 22 1/2” 572 mm 22 1/2” 572 mm
Axial Optics
SPORTSLIGHTING
Horizontal Optics
B 5 33/64” 140 mm 36 5/8” 930 mm
C 20 1/8” 511 mm 5 1/4” 133 mm
D 35 3/4” 908 mm
SLS Remote Head D
E
D 106
B
B
C G 90 F
A
A
Axial Optics Horizontal Optics
A 20 1/8” 511 mm 21” 533 mm
B 22 1/2” 572 mm 22 1/2” 572 mm
C 4 3/4” 121 mm 3 1/2” 89 mm
D 12” 305 mm 13” 330 mm
E 8 1/8” 206 mm
SLS Remote Yoke D C A B A 3 1/8” 79 mm
650
Hubbell Lighting
B 7/8” dia. 22 mm
C 17/32” dia. 14 mm
D 2” 51 mm
C
F 18 7/8” R 479 mm
G 9” R 229 mm
SLS SERIES ACCESSORIES SPORTSLITER SOLUTIONS
Ordering Information: Sportsliter® System Accessories Catalog Number 4024SLS 4024C5 40905 SLSV1, 4 SL-HCL4 SLS-CL4 SLC-SPC2 SLS-AA-REM FL-C3-14 FL-C3-16 FL-C6-14 FL-C6-16 SLSF SLSFF 50103 50905 SLSC
Slipfitter for 2” (2 3/8” OD) tenon Slipfitter for 2” (2 3/8” OD) tenon for remote head units only Heavy duty cast iron crossarm fitting for horizontal trunnion for remote heads only Visor assembly (10” deep) Half internal concentric louver Full internal concentric louver Polycarbonate Shield Remote head aiming sight 3 ft. #14/3 SEOW-A cord 3 ft. #16/3 SEOW-A cord 6 ft. #14/3 SEOW-A cord 6 ft. #16/3 SEOW-A cord Field installed single fuse holder (120, 277 & 347V) Field installed double fuse holder (208, 240 & 480V) Heavy duty steel fitting Heavy duty steel crossarm fitting for remote head units only Safety cable
Visor adds 1.1 EPA (.12 m²) to Sportsliter®. Suitable for NEMA 5/6/W beam spreads. 400-1000W only. Must use with SLS Series (integral ballasted) when mounting on center location of TCA-W3 & TCA-R3 style crossarm brackets. NEMA 2 - 6 only. Not for use with beam type N/M/W. For use with remote head only. For other mounting accessories, see floodlight mounting accessories.
4024 SLS
5010 4090
4024C
5090
SL-H CL
SL S-V
SLS-SPC
SL-CL
Ordering Information: SLS Mounting Accessories Maximum Loading Fixture Quantity
Weight lbs. (kg)
EPA ft² (m²)
TCA-R2 TCA-R3 TCA-R4
2 3 4
28 (12.7) 70 (31.7) 106 (48)
.8 (0.1) 1.6 (0.2) 2.5 (0.2)
TCA-W2 TCA-W3 TCA-W4
2 3 4
21 (9.5) 80 (36.3) 106 (48)
1 (0.1) 1.8 (0.2) 2.4 (0.2)
Catalog Number
1 2 Note
Description Weight lbs. (kg) Round Steel Pole - Crossarm Type TCA-R Series - Clamps 3” to 5 1/2” dia.1 210 (95.3) For two fixtures 315 (142.9) For three fixtures2 420 (190.5) For four fixtures Wood Pole - Crossarm Type TCA-W Series - Thru or Lag Bolt (Not Included)1 210 (95.3) For two fixtures 315 (142.9) For three fixtures2 420 (190.5) For four fixtures
SPORTSLIGHTING
1 2 3 4 5 Note
Weight lbs. (kg) 4 (1.8) 4 (1.8) 3 (1.4) 3 (1.4) 2 (0.9) 3 (1.4) 5 (2.3) 2 (0.9) 1 (0.5) -
Description
Crossarm fitting hardware (for 5090, 4090) included. One 5010 mounting bracket included. Galvanized available, add suffix -M38.
D
D D
A
A
TCA-W TCA-R
A 3” 76 mm 3” 76 mm
B 36” 914 mm 36” dia. 914 mm
E
C 36” 914 mm 36” 914 mm
B
B TCA-R2
TCA-R3
A
C
B
C
D 6” 152 mm 36” 914 mm
E 32” 813 mm -
TCA- W2
A
TCA-W3
D
E
E
B A
E
TCA-W4
Hubbell Lighting
651
TAPERED STEEL POLES SPORTSLITER SOLUTIONS
Features
RLS and MLS high mount poles are tapered steel assemblies complete with mounting crossarms, platforms and needed wire entrance couplings. These assemblies simplify the often complicated tasks of choosing an economical, yet safe mounting system for heights above 40’ The RLS Series is round tapered steel with angle crossarms designed for luminaire maintenance from a bucket truck or similar method. Standard finish is prime paint. The MLS Series pole is either multi-sided or round tapered steel, and has a field mounted angle iron or tubular cage for servicing. To accommodate periodic maintenance, steps and safety cable are also included. Each pole has a reinforced handhole and a steel base plate along with required anchor bolts and leveling nuts with washers. To ensure correct installation, bolt template is included. Pole finish may be prime painted or hot dipped galvanized.
Ordering Information
SPORTSLIGHTING
RLS Series Round Tapered Catalog Number2 Steady Wind Velocity3 80 MPH 100 MPH RLS-05011 RLS-05031 RLS-05012 RLS-05032 RLS-05013 RLS-05033 RLS-06011 RLS-06031 RLS-06012 RLS-06032 RLS-06013 RLS-06033
RLS Series
1 2 3
Nominal Pole Height ft. (m) 50 50 50 60 60 60
(15.2) (15.2) (15.2) (18.2) (18.2) (18.2)
Max. Qty Sportsliters1 4 6 8 4 6 8
Hubbell Lighting Sportsliter® luminaire and crossarm mounting brackets are not included. Includes poles, crossarms and anchorage. Steady wind velocities of 80 and 100 MPH with gusts to 104 and 130 MPH respectively.
MLS Series Catalog Number1, 2 Steady Wind Velocity 80 MPH 100 MPH MLS-07011 MLS-07031 MLS-07012 MLS-07032 MLS-07013 MLS-07033 MLS-08011 MLS-08031 MLS-08012 MLS-08032 MLS-08013 MLS-08033 MLS-10012 MLS-10032 MLS-10013 MLS-10033 MLS-10014 MLS-10034 1 2
Nominal Pole Height Max. Qty Number of ft. (m) Luminaires Pole Sections 70 (21.3) 70 (21.3) 70 (21.3) 80 (24.4) 80 (24.4) 80 (24.4) 100 (30.5) 100 (30.5) 100 (30.5)
8 12 16 8 12 16 12 16 24
2 2 2 2 or 3 2 or 3 2 or 3 3 3 3
Steady wind velocities of 80 and 100 MPH with gusts to 104 and 130 MPH respectively. Catalog number includes pole, platform, and anchorage. Factory supplied templates must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template.
Options
Due to the highly specialized application requirements for this type of pole, factory supplied options such as extra handholes, wiring outlets, pole grains, transformer mountings, galvanizing and weathering steel must be specified. Consult factory.
MLS Series
652
Hubbell Lighting
SLS TENNIS COURT SYSTEM SPORTSLITER SOLUTIONS
Features
SportsLiter Solutions SLS Series Tennis Court System is a sharp cut-off lighting system ideally suited for tennis courts, basketball courts, volleyball courts and in-line skating parks. It’s innovative luminaire design and optics minimize light spillage and keep the light where you want it - on the playing surface. • One-piece formed and welded aluminum housing • Two mills minimum of electrostatically applied powder coating • Extruded aluminum door frame • Clear flat tempered glass lens • Cellular urethane foam gasketing • Door mounted with concealed hinges
A B C
• Computer designed optics provides sharp cut-off and uniform lighting • BT-56 lamp included • Ballast factory mounted on galvanized plate • Isolated ballast compartment for prolonged ballast life • UL 1598 wet location listed
D
E
Ordering Information B) Arms
A) Luminaire Logic SLTC Series
Series SLTC SLTC Series Housing Style A Version A Wattage/Source 1000H 1000W MH 0400H 400W MH Optics HT Horizontal Forward Throw Voltage 8 Quad Tap® (120, 208, 240, 277V) 5 480V Color 1 Bronze 2 Black 7 Green
Description Single arm, Bronze Single arm, Black Single arm, Green
C) Twin and Quad Couplers
SLTC-TB-X Catalog Number SLTC-TB-1 SLTC-TB-2 SLTC-TB-7 SLTC-QB-1 SLTC-QB-2 SLTC-QB-7
SLTC-QB-X Description Twin coupler, Bronze Twin coupler, Black Twin coupler, Green Quad coupler, Bronze Quad coupler, Black Quad coupler, Green
E) Round Straight Steel Pole Logic SLT Series
D) Shroud
1
Description Shroud, Black Shroud, Bronze Shroud, Green
Replace “X” with 4 - 4” poles, 5 - 5” poles or 6 - 6” poles. Must be ordered when twin or quad couplers are used.
-
4 Nominal Shaft Size
-
18 7 - DB - M50 Nominal Mt. Shaft Gauge Color Base Length
Series SLT SLT Series Nominal Shaft Size 4 Four inches 5 Five inches 6 Six inches Nominal Shaft Length 18 Eighteen foot 20 Twenty foot Gauge 31 3 Gauge 72 7 Gauge 3 1 11 Gauge Mounting Base AB Anchor base steel4 DB Direct embedded steel Color 1 Bronze 2 Black 7 Green
• 4” common arm for twin and quad couplers • Twin couplers good for 70° and 180° orientations • Mounting hardware and set screws included
Catalog Number1 SHROUDX-M50 SHROUDX-M51 SHROUDX-M57
- 1000H - HT - 8 - 1 Watts/ Optics Volts Color Source
SPORTSLIGHTING
Catalog Number SLTC-SA-1 SLTC-SA-2 SLTC-SA-7
A Housing Style
1 2 3 4
Six inch shafts only. Four and five inch shafts only. Four inch shafts only. Anchor base poles include base cover.
Hubbell Lighting
653
Features
SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of today’s sports lighting specifications. Each system includes all you need to light a sporting event including pole top crossarms, optics/lamps, poles, wiring harness, electrical enclosures, professional lighting designs and installation help. The remote system crossarms are shipped factory aimed and pre-wired for reliability and cost effective installation. The remote ballast enclosures are pre-wired to a keyed connector so attachment of the factory built wiring harness will complete the electrical connection to the pole top assembly. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location. This engineered system is designed to work together guaranteeing performance and long trouble free operation.
System Components
B) Internal Wiring Harness • Pre-wired to keyed connectors • 100% factory electrically tested • 12 gauge wire • Color coded • Labeled with pole reference C) Direct Embedded Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Corrocote II protective coating (below grade to 6” above) • Ground lug included • Harness support hangers • UL listed
• • • •
Enclosed in flex conduit Kellums cable support grip Matched to pole length UL listed / CSA certified
A
Axial Optic
B
C Horizontal Optic
Anchor Base Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Anchor bolts and templates included • Ground lug included • Harness support hangers Spill/Glare Optic • UL listed
Concrete Poles • Centrifugal Spun • Pre-stressed • System matched to luminaires • Shipped as single piece • Ground lug included • Harness support hangers • Smooth, natural finish D) Remote Ballast Enclosure • Hot-dip Galvanized finish or Lektrocote finished aluminum • Stainless steel latches • Pre-wired to single plug in connector • Individual fusing • Wiring entry • Thermal magnetic or load break switch
100% electrically tested Optional spill / glare control optics Silicone gaskets Lektrocote® painted knuckle Anodal® finished optics Tempered glass lens Stainless steel lens ring Hubbell Gard® treated hardware UL listed / CSA certified
SPORTSLIGHTING
A) Pole Top Crossarm Assembly and Optics • Pre-wired to single connectors • • Factory aimed • • Concealed wiring • • Hot-dip Galvanized steel crossarm • • Die-cast aluminum knuckle • • Re-positioning pin • • Labeled with pole reference • • Labeled with optic type • • Stainless steel mounting bolts •
D
Poles “SGV” Spill/Glare Optic wtih visor
• • • • • • •
Galvanized steel hinges Gasketed Grounding lug Wiring schematic Pole top arraignment drawing Pole location label UL listed / CSA certified
Remote Enclosure
Pole top crossarm assembly
Wiring Harness
Hubbell Lighting
647
INTEGRAL BALLAST SYSTEM SPORTSLITER SOLUTIONS
Features
SportsLiter Solutions Systems is an integrated modular lighting system designed to meet the demanding requirements of today’s sports lighting specifications. Each system includes pre-wired pole top crossarms (wired to junction boxes and distribution blocks), pre-wired integral ballast luminaires with optics and lamps, professional lighting designs and installation help. Steel or concrete poles are included and are matched to the wind zone and luminaire quantity per location.This engineered system is designed to work together guaranteeing performance and long trouble free operation.
SPORTSLIGHTING
System Configuration A) Pole Top Crossarm Assembly • Pre-wired to distribution blocks • Junction box included for wiring connections (hot-dip galvanized) • Hot-dip Galvanized steel crossarm • Mounting hardware included • Labeled with pole reference • Labeled with optic type • Tubular steel crossarms • UL listed / CSA certified B) Integral Ballasted Luminaire • Die-cast aluminum housing • Pre-wired with cord / plug set • Isolated ballast compartment from lamp • Stainless steel lens ring • Silicone gasketing • Filtered optics • Built in lamp support • Isolated wiring chamber • Hubbell Gard™ treated hardware • Lektrocote® polyester powder paint • Horizontal and vertical aiming indicators • Environmental spill/glare control optional C) Direct Embedded Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Corrocote II protective coating (below grade to 6” above) • Ground lug included • Power cord support hangers (cord by others) • UL listed
• • • • • • • •
Steel and concrete pole mounting options Base plate or clamp on mount available 100% electrically tested at factory Strain relief support included Fillet type welds Ground lug included Single phase wired 2-6 luminaires Three phase wired 7-18 luminaires
• • • • •
Mounting hardware included Fast Aim ™ system Repositioning stop Anodal® finished parabolic reflector Thermal shock, impact resistant tempered lens Stainless steel hinge Four point lens latching Aiming sights included UL listed and CSA certified Note, luminaires must be aimed at site
• • • • •
Axial Optic
Horizontal Optic
Spill/Glare Optic
Anchor Base Steel Poles • Hot-dip Galvanized finish • System matched to luminaires • Shipped in sections • Anchor bolts and templates included • Ground lug included • Power cord support hangers (cord by others) • UL listed
“SGV” Spill/Glare optic with visor
Concrete Poles • Centrifugal Spun • Pre-stressed • System matched to luminaires • Shipped as single piece • Ground lug included • Harness support hangers • Smooth, natural finish Poles
648
Hubbell Lighting
SLS SERIES
SPORTSLITER SOLUTIONS
Features SLS series Sportsliter luminaires are ideally suited for recreational, collegiate and professional sporting events where quality levels of illumination and uniformity are required. They are equally suited for large open areas such as parking lots, storage areas and transfer yards. • Die-cast aluminum housing • Fast Aim ™ system • Isolated ballast compartment from • Repositioning stop lamp • Super Sodium™ 600w hot re-strike • Stainless steel lens ring • Anodal® finished parabolic reflector • Silicone gasketing • Thermal shock, impact resistant • Filtered optics tempered lens • Built in lamp support • Stainless steel hinge • Mounting hardware included • Four point lens latching • Isolated wiring chamber • Aiming sights included • Hubbell Gard™ treated hardware • Environmental spill/glare control • Lektrocote® polyester powder paint optional • Horizontal and vertical aiming • Remote ballast system available indicators • UL listed and CSA certified
Ordering Information
Example:
SLS Series
1
Sportsliter Series 1000W Metal Halide 1500W Metal Halide 1650W Metal Halide 600W High Pressure Sodium13 1000W High Pressure Sodium Metal Halide High Pressure Sodium No Ballast (remote head only)2 HPF Regulated, Peak Lead Auto, CWA, Auto Regulated
Watts
-
H
-
Lamp
Beam Distribution12 2 NEMA Type 2 3 NEMA Type 3 4 NEMA Type 4 5 NEMA Type 5 6 NEMA Type 6 N Narrow Beam Horizontal lamp11 M Medium Beam Horizontal lamp11 W Wide Beam Horizontal lamp11 Voltage 5 480V4 6 Tri-Tap® (120, 277, 347V)6 7 600V1 8 Quad Tap® (120, 208, 240, 277V) 0 No Ballast (remote head only)2 E 220/240V 50 Hz3 C 347/480V5
1
-
2
-
Beam Dist.
Ballast
Options -3C(X) -6C(X) -12C(X) -F(X)
-PH -L -HO -SG -SGV
-M51
8 Volts
-
PH Options
3’ Prewired SEOWA Cord (specify voltage)7, 14 6’ Prewired SEOWA Cord (specify voltage)7, 14 12’ Prewired SEOWA Cord (specify voltage)7, 14 Fusing: replace X with 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V fuses incl., externally mtd.8 Protective Heavy-Duty Outer Hull9 Unit with Lamp (shipped separately) High Output 1000 or 1500W MH POM Socket (lamp not included) Spill/Glare Control (internal faceted louver, MH only)10 High end spill/glare control (Internal faceted louver with external visor, metal halide only).10 Bronze Lektrocote® finish
SPORTSLIGHTING
Series SLS Wattage 1000 1500 1650 0600 1000 Lamp Type H S Ballast Type 0
- 1500
1 2
CSA certified only, not UL listed. Remote head units, specify wattage and lamp type to be used H for MH and S for HPS. Example: SLS100H-020. NOTE: 600W HPS may not be remote ballasted. 3 1000 and 1500W MH only. All other wattages and sources consult factory. 4 Except 1650W MH. For 480V 1650W, use C. 5 1650W MH only. 6 600W HPS. Single voltage only (347V). 7 For wire gauge, replace X with 6 - 16/3; 4 - 14/3; or 2 - 12/3. NOTE: 120V 1500W units must use 14/3 or 12/3. 8 To denote voltage, replace X with 1 - 120V; 2 - 208V; 3 - 240V; 4 - 277V; 5 - 480V; 6 - 347V. 9 Hull adds 4 lbs. to total weight - shipped separately except on N/M/W optics (assembled on unit). 10 Internal faceted louvers for beam type N/M/W only. 11 Not available in HPS. Luminaire shipped as completely assembled unit. 12 Units not suitable for up aiming. 13 Lamp included. 14 Specific wire gauge and wiring methods may be required by local or national codes. Consult local inspection agencies for details prior to ordering. Note Order accessories separately.
Hubbell Lighting
649
SLS SERIES DIMENSIONS SPORTSLITER SOLUTIONS
SLS Integrated Ballast C
B
D
B C Aimed 40 degrees below horizontal
A
Aimed 40 degrees below horizontal
A
A 22 1/2” 572 mm 22 1/2” 572 mm
Axial Optics
SPORTSLIGHTING
Horizontal Optics
B 5 33/64” 140 mm 36 5/8” 930 mm
C 20 1/8” 511 mm 5 1/4” 133 mm
D 35 3/4” 908 mm
SLS Remote Head D
E
D 106
B
B
C G 90 F
A
A
Axial Optics Horizontal Optics
A 20 1/8” 511 mm 21” 533 mm
B 22 1/2” 572 mm 22 1/2” 572 mm
C 4 3/4” 121 mm 3 1/2” 89 mm
D 12” 305 mm 13” 330 mm
E 8 1/8” 206 mm
SLS Remote Yoke D C A B A 3 1/8” 79 mm
650
Hubbell Lighting
B 7/8” dia. 22 mm
C 17/32” dia. 14 mm
D 2” 51 mm
C
F 18 7/8” R 479 mm
G 9” R 229 mm
SLS SERIES ACCESSORIES SPORTSLITER SOLUTIONS
Ordering Information: Sportsliter® System Accessories Catalog Number 4024SLS 4024C5 40905 SLSV1, 4 SL-HCL4 SLS-CL4 SLC-SPC2 SLS-AA-REM FL-C3-14 FL-C3-16 FL-C6-14 FL-C6-16 SLSF SLSFF 50103 50905 SLSC
Slipfitter for 2” (2 3/8” OD) tenon Slipfitter for 2” (2 3/8” OD) tenon for remote head units only Heavy duty cast iron crossarm fitting for horizontal trunnion for remote heads only Visor assembly (10” deep) Half internal concentric louver Full internal concentric louver Polycarbonate Shield Remote head aiming sight 3 ft. #14/3 SEOW-A cord 3 ft. #16/3 SEOW-A cord 6 ft. #14/3 SEOW-A cord 6 ft. #16/3 SEOW-A cord Field installed single fuse holder (120, 277 & 347V) Field installed double fuse holder (208, 240 & 480V) Heavy duty steel fitting Heavy duty steel crossarm fitting for remote head units only Safety cable
Visor adds 1.1 EPA (.12 m²) to Sportsliter®. Suitable for NEMA 5/6/W beam spreads. 400-1000W only. Must use with SLS Series (integral ballasted) when mounting on center location of TCA-W3 & TCA-R3 style crossarm brackets. NEMA 2 - 6 only. Not for use with beam type N/M/W. For use with remote head only. For other mounting accessories, see floodlight mounting accessories.
4024 SLS
5010 4090
4024C
5090
SL-H CL
SL S-V
SLS-SPC
SL-CL
Ordering Information: SLS Mounting Accessories Maximum Loading Fixture Quantity
Weight lbs. (kg)
EPA ft² (m²)
TCA-R2 TCA-R3 TCA-R4
2 3 4
28 (12.7) 70 (31.7) 106 (48)
.8 (0.1) 1.6 (0.2) 2.5 (0.2)
TCA-W2 TCA-W3 TCA-W4
2 3 4
21 (9.5) 80 (36.3) 106 (48)
1 (0.1) 1.8 (0.2) 2.4 (0.2)
Catalog Number
1 2 Note
Description Weight lbs. (kg) Round Steel Pole - Crossarm Type TCA-R Series - Clamps 3” to 5 1/2” dia.1 210 (95.3) For two fixtures 315 (142.9) For three fixtures2 420 (190.5) For four fixtures Wood Pole - Crossarm Type TCA-W Series - Thru or Lag Bolt (Not Included)1 210 (95.3) For two fixtures 315 (142.9) For three fixtures2 420 (190.5) For four fixtures
SPORTSLIGHTING
1 2 3 4 5 Note
Weight lbs. (kg) 4 (1.8) 4 (1.8) 3 (1.4) 3 (1.4) 2 (0.9) 3 (1.4) 5 (2.3) 2 (0.9) 1 (0.5) -
Description
Crossarm fitting hardware (for 5090, 4090) included. One 5010 mounting bracket included. Galvanized available, add suffix -M38.
D
D D
A
A
TCA-W TCA-R
A 3” 76 mm 3” 76 mm
B 36” 914 mm 36” dia. 914 mm
E
C 36” 914 mm 36” 914 mm
B
B TCA-R2
TCA-R3
A
C
B
C
D 6” 152 mm 36” 914 mm
E 32” 813 mm -
TCA- W2
A
TCA-W3
D
E
E
B A
E
TCA-W4
Hubbell Lighting
651
TAPERED STEEL POLES SPORTSLITER SOLUTIONS
Features
RLS and MLS high mount poles are tapered steel assemblies complete with mounting crossarms, platforms and needed wire entrance couplings. These assemblies simplify the often complicated tasks of choosing an economical, yet safe mounting system for heights above 40’ The RLS Series is round tapered steel with angle crossarms designed for luminaire maintenance from a bucket truck or similar method. Standard finish is prime paint. The MLS Series pole is either multi-sided or round tapered steel, and has a field mounted angle iron or tubular cage for servicing. To accommodate periodic maintenance, steps and safety cable are also included. Each pole has a reinforced handhole and a steel base plate along with required anchor bolts and leveling nuts with washers. To ensure correct installation, bolt template is included. Pole finish may be prime painted or hot dipped galvanized.
Ordering Information
SPORTSLIGHTING
RLS Series Round Tapered Catalog Number2 Steady Wind Velocity3 80 MPH 100 MPH RLS-05011 RLS-05031 RLS-05012 RLS-05032 RLS-05013 RLS-05033 RLS-06011 RLS-06031 RLS-06012 RLS-06032 RLS-06013 RLS-06033
RLS Series
1 2 3
Nominal Pole Height ft. (m) 50 50 50 60 60 60
(15.2) (15.2) (15.2) (18.2) (18.2) (18.2)
Max. Qty Sportsliters1 4 6 8 4 6 8
Hubbell Lighting Sportsliter® luminaire and crossarm mounting brackets are not included. Includes poles, crossarms and anchorage. Steady wind velocities of 80 and 100 MPH with gusts to 104 and 130 MPH respectively.
MLS Series Catalog Number1, 2 Steady Wind Velocity 80 MPH 100 MPH MLS-07011 MLS-07031 MLS-07012 MLS-07032 MLS-07013 MLS-07033 MLS-08011 MLS-08031 MLS-08012 MLS-08032 MLS-08013 MLS-08033 MLS-10012 MLS-10032 MLS-10013 MLS-10033 MLS-10014 MLS-10034 1 2
Nominal Pole Height Max. Qty Number of ft. (m) Luminaires Pole Sections 70 (21.3) 70 (21.3) 70 (21.3) 80 (24.4) 80 (24.4) 80 (24.4) 100 (30.5) 100 (30.5) 100 (30.5)
8 12 16 8 12 16 12 16 24
2 2 2 2 or 3 2 or 3 2 or 3 3 3 3
Steady wind velocities of 80 and 100 MPH with gusts to 104 and 130 MPH respectively. Catalog number includes pole, platform, and anchorage. Factory supplied templates must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template.
Options
Due to the highly specialized application requirements for this type of pole, factory supplied options such as extra handholes, wiring outlets, pole grains, transformer mountings, galvanizing and weathering steel must be specified. Consult factory.
MLS Series
652
Hubbell Lighting
SLS TENNIS COURT SYSTEM SPORTSLITER SOLUTIONS
Features
SportsLiter Solutions SLS Series Tennis Court System is a sharp cut-off lighting system ideally suited for tennis courts, basketball courts, volleyball courts and in-line skating parks. It’s innovative luminaire design and optics minimize light spillage and keep the light where you want it - on the playing surface. • One-piece formed and welded aluminum housing • Two mills minimum of electrostatically applied powder coating • Extruded aluminum door frame • Clear flat tempered glass lens • Cellular urethane foam gasketing • Door mounted with concealed hinges
A B C
• Computer designed optics provides sharp cut-off and uniform lighting • BT-56 lamp included • Ballast factory mounted on galvanized plate • Isolated ballast compartment for prolonged ballast life • UL 1598 wet location listed
D
E
Ordering Information B) Arms
A) Luminaire Logic SLTC Series
Series SLTC SLTC Series Housing Style A Version A Wattage/Source 1000H 1000W MH 0400H 400W MH Optics HT Horizontal Forward Throw Voltage 8 Quad Tap® (120, 208, 240, 277V) 5 480V Color 1 Bronze 2 Black 7 Green
Description Single arm, Bronze Single arm, Black Single arm, Green
C) Twin and Quad Couplers
SLTC-TB-X Catalog Number SLTC-TB-1 SLTC-TB-2 SLTC-TB-7 SLTC-QB-1 SLTC-QB-2 SLTC-QB-7
SLTC-QB-X Description Twin coupler, Bronze Twin coupler, Black Twin coupler, Green Quad coupler, Bronze Quad coupler, Black Quad coupler, Green
E) Round Straight Steel Pole Logic SLT Series
D) Shroud
1
Description Shroud, Black Shroud, Bronze Shroud, Green
Replace “X” with 4 - 4” poles, 5 - 5” poles or 6 - 6” poles. Must be ordered when twin or quad couplers are used.
-
4 Nominal Shaft Size
-
18 7 - DB - M50 Nominal Mt. Shaft Gauge Color Base Length
Series SLT SLT Series Nominal Shaft Size 4 Four inches 5 Five inches 6 Six inches Nominal Shaft Length 18 Eighteen foot 20 Twenty foot Gauge 31 3 Gauge 72 7 Gauge 3 1 11 Gauge Mounting Base AB Anchor base steel4 DB Direct embedded steel Color 1 Bronze 2 Black 7 Green
• 4” common arm for twin and quad couplers • Twin couplers good for 70° and 180° orientations • Mounting hardware and set screws included
Catalog Number1 SHROUDX-M50 SHROUDX-M51 SHROUDX-M57
- 1000H - HT - 8 - 1 Watts/ Optics Volts Color Source
SPORTSLIGHTING
Catalog Number SLTC-SA-1 SLTC-SA-2 SLTC-SA-7
A Housing Style
1 2 3 4
Six inch shafts only. Four and five inch shafts only. Four inch shafts only. Anchor base poles include base cover.
Hubbell Lighting
653
