Remove the guesswork. AWS
AudioLINK
TM
Remove the guesswork.
Aico Ltd
Mile End Business Park Maesbury Road, Oswestry, Shropshire SY10 8NN
Call us:
01691 664100 Fax: 01691 664111 email: [email protected] October 2016
AudioLINK™, making it easier to get real time data from your alarm.
Gas Industry Innovation
Saves time, money and lives
Aico Ltd is a wholly owned subsidiary of Ei Electronics
Europe’s Leader in Residential Fire + Gas Detection Ei Electronics. Shannon. Ireland
www.aico.co.uk/AudioLINK
Made in Ireland
Real time facts… Real time action www.aico.co.uk/AudioLINK
Need to contact us? About Aico
Regional Specification Managers
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • Every alarm is tested at multiple points during the manufacturing process.
Compliance and Responsibilities We know that you take your Duty of Care seriously and are always looking for ways in which to improve the level of protection your tenant receives whilst being more time, budget and resource efficient.
Also from the 1st October 2015, Private Landlords in England will be required to fit CO alarms in all rooms with solid fuel heating systems installed.
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard. Aberdeen
Edinburgh Glasgow
2
Newcastle
3
13
Middlesbrough
Belfast
York Leeds
Hull
4
Aico have Regional Specification Managers situated throughout the UK that can help in a consultative role to advise on alarm selection, siting, installation and maintenance. To find the nearest one to you please use this map.
Liverpool
5
Manchester Nottingham Derby
Birmingham
Norwich
Coventry
15
6 www.aico.co.uk/Ei160e
Aberystwyth
7
Cardiff
Swindon
9
South West Caroline Powell Tel: 07771 961 253 [email protected]
9 Home Counties North Briony Martin Tel: 07771 925 694 [email protected]
2 North Barry Mather Tel: 07799 901 740 [email protected]
10
South London Sales Office Tel: 01691 664100 [email protected]
. Wales & N. West 5 N Steve Trafford Tel: 07771 961 254 [email protected]
12 N orth London Tina Mistry Tel: 07771 961 255 [email protected]
est Midlands 6 W Kate Blake Tel: 07771 925 695 [email protected]
orthern Ireland 13 N Duncan Orr Tel: 07876 548 019 [email protected]
ast Midlands 6 E Will van Amersfoort Tel: 07496 863 575 [email protected]
outh East 14 S Sales Office Tel: 01691 664100 [email protected]
ales & Borders 7 W Dan Thomas Tel: 07495 896 235 [email protected]
ast 15 E Gary Mason Tel: 07741 312 391 [email protected]
12 London
11
14
Southampton Bournemouth
Plymouth
www.aico.co.uk/AudioLINK
8
2 West Scotland Colleen Grant Tel: 07771 925 699 [email protected]
10
Bristol
8
orth Scotland N Colin Middleton Tel: 07771 925 698 [email protected]
orks. / N.E. Midlands 4 Y 11 South Paul Cartwright Andrew Sturgess Tel: 07771 816 819 Tel: 07799 901 739 [email protected] [email protected]
1
Part of this Duty of Care is to fit and maintain Carbon Monoxide (CO) alarms. This extends to regular testing of the alarms to ensure they are operational and providing the protection they are designed to give. Building Regulations require CO alarms to be fitted to the British Standard (BS EN 50292:2013), but there are some differences in requirements across the UK. In England and Wales, CO alarms must be fitted when installing a new or replacing an old solid fuel burning appliance. In Scotland and Northern Ireland, alarms must be fitted when installing a new or replacing an old appliance that burns any type of fuel, except for cookers, and additionally in Scotland only, regularly used rooms with a flue exhaust pipe running through.
1
www.aico.co.uk/AudioLINK
Aico Ltd Mile End Business Park Maesbury Road Oswestry Shropshire SY10 8NN
Tel: 01691 664100 Fax: 01691 664111 [email protected] Sales [email protected] Technical [email protected]
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
Need to contact us? About Aico
Regional Specification Managers
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • Every alarm is tested at multiple points during the manufacturing process.
Compliance and Responsibilities We know that you take your Duty of Care seriously and are always looking for ways in which to improve the level of protection your tenant receives whilst being more time, budget and resource efficient.
Also from the 1st October 2015, Private Landlords in England will be required to fit CO alarms in all rooms with solid fuel heating systems installed.
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard. Aberdeen
Edinburgh Glasgow
2
Newcastle
3
13
Middlesbrough
Belfast
York Leeds
Hull
4
Aico have Regional Specification Managers situated throughout the UK that can help in a consultative role to advise on alarm selection, siting, installation and maintenance. To find the nearest one to you please use this map.
Liverpool
5
Manchester Nottingham Derby
Birmingham
Norwich
Coventry
15
6 www.aico.co.uk/Ei160e
Aberystwyth
7
Cardiff
Swindon
9
South West Caroline Powell Tel: 07771 961 253 [email protected]
9 Home Counties North Briony Martin Tel: 07771 925 694 [email protected]
2 North Barry Mather Tel: 07799 901 740 [email protected]
10
South London Sales Office Tel: 01691 664100 [email protected]
. Wales & N. West 5 N Steve Trafford Tel: 07771 961 254 [email protected]
12 N orth London Tina Mistry Tel: 07771 961 255 [email protected]
est Midlands 6 W Kate Blake Tel: 07771 925 695 [email protected]
orthern Ireland 13 N Duncan Orr Tel: 07876 548 019 [email protected]
ast Midlands 6 E Will van Amersfoort Tel: 07496 863 575 [email protected]
outh East 14 S Sales Office Tel: 01691 664100 [email protected]
ales & Borders 7 W Dan Thomas Tel: 07495 896 235 [email protected]
ast 15 E Gary Mason Tel: 07741 312 391 [email protected]
12 London
11
14
Southampton Bournemouth
Plymouth
www.aico.co.uk/AudioLINK
8
2 West Scotland Colleen Grant Tel: 07771 925 699 [email protected]
10
Bristol
8
orth Scotland N Colin Middleton Tel: 07771 925 698 [email protected]
orks. / N.E. Midlands 4 Y 11 South Paul Cartwright Andrew Sturgess Tel: 07771 816 819 Tel: 07799 901 739 [email protected] [email protected]
1
Part of this Duty of Care is to fit and maintain Carbon Monoxide (CO) alarms. This extends to regular testing of the alarms to ensure they are operational and providing the protection they are designed to give. Building Regulations require CO alarms to be fitted to the British Standard (BS EN 50292:2013), but there are some differences in requirements across the UK. In England and Wales, CO alarms must be fitted when installing a new or replacing an old solid fuel burning appliance. In Scotland and Northern Ireland, alarms must be fitted when installing a new or replacing an old appliance that burns any type of fuel, except for cookers, and additionally in Scotland only, regularly used rooms with a flue exhaust pipe running through.
1
www.aico.co.uk/AudioLINK
Aico Ltd Mile End Business Park Maesbury Road Oswestry Shropshire SY10 8NN
Tel: 01691 664100 Fax: 01691 664111 [email protected] Sales [email protected] Technical [email protected]
AudioLINK
TM
Remove the guesswork.
Aico Ltd
Mile End Business Park Maesbury Road, Oswestry, Shropshire SY10 8NN
Call us:
01691 664100 Fax: 01691 664111 email: [email protected] October 2016
AudioLINK™, making it easier to get real time data from your alarm.
Gas Industry Innovation
Saves time, money and lives
Aico Ltd is a wholly owned subsidiary of Ei Electronics
Europe’s Leader in Residential Fire + Gas Detection Ei Electronics. Shannon. Ireland
www.aico.co.uk/AudioLINK
Made in Ireland
Real time facts… Real time action www.aico.co.uk/AudioLINK
TM
Remove the guesswork.
Aico Ltd
Mile End Business Park Maesbury Road, Oswestry, Shropshire SY10 8NN
Call us:
01691 664100 Fax: 01691 664111 email: [email protected] October 2016
AudioLINK™, making it easier to get real time data from your alarm.
Gas Industry Innovation
Saves time, money and lives
Aico Ltd is a wholly owned subsidiary of Ei Electronics
Europe’s Leader in Residential Fire + Gas Detection Ei Electronics. Shannon. Ireland
www.aico.co.uk/AudioLINK
Made in Ireland
Real time facts… Real time action www.aico.co.uk/AudioLINK
Need to contact us? About Aico
Regional Specification Managers
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • Every alarm is tested at multiple points during the manufacturing process.
Compliance and Responsibilities We know that you take your Duty of Care seriously and are always looking for ways in which to improve the level of protection your tenant receives whilst being more time, budget and resource efficient.
Also from the 1st October 2015, Private Landlords in England will be required to fit CO alarms in all rooms with solid fuel heating systems installed.
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard. Aberdeen
Edinburgh Glasgow
2
Newcastle
3
13
Middlesbrough
Belfast
York Leeds
Hull
4
Aico have Regional Specification Managers situated throughout the UK that can help in a consultative role to advise on alarm selection, siting, installation and maintenance. To find the nearest one to you please use this map.
Liverpool
5
Manchester Nottingham Derby
Birmingham
Norwich
Coventry
15
6 www.aico.co.uk/Ei160e
Aberystwyth
7
Cardiff
Swindon
9
South West Caroline Powell Tel: 07771 961 253 [email protected]
9 Home Counties North Briony Martin Tel: 07771 925 694 [email protected]
2 North Barry Mather Tel: 07799 901 740 [email protected]
10
South London Sales Office Tel: 01691 664100 [email protected]
. Wales & N. West 5 N Steve Trafford Tel: 07771 961 254 [email protected]
12 N orth London Tina Mistry Tel: 07771 961 255 [email protected]
est Midlands 6 W Kate Blake Tel: 07771 925 695 [email protected]
orthern Ireland 13 N Duncan Orr Tel: 07876 548 019 [email protected]
ast Midlands 6 E Will van Amersfoort Tel: 07496 863 575 [email protected]
outh East 14 S Sales Office Tel: 01691 664100 [email protected]
ales & Borders 7 W Dan Thomas Tel: 07495 896 235 [email protected]
ast 15 E Gary Mason Tel: 07741 312 391 [email protected]
12 London
11
14
Southampton Bournemouth
Plymouth
www.aico.co.uk/AudioLINK
8
2 West Scotland Colleen Grant Tel: 07771 925 699 [email protected]
10
Bristol
8
orth Scotland N Colin Middleton Tel: 07771 925 698 [email protected]
orks. / N.E. Midlands 4 Y 11 South Paul Cartwright Andrew Sturgess Tel: 07771 816 819 Tel: 07799 901 739 [email protected] [email protected]
1
Part of this Duty of Care is to fit and maintain Carbon Monoxide (CO) alarms. This extends to regular testing of the alarms to ensure they are operational and providing the protection they are designed to give. Building Regulations require CO alarms to be fitted to the British Standard (BS EN 50292:2013), but there are some differences in requirements across the UK. In England and Wales, CO alarms must be fitted when installing a new or replacing an old solid fuel burning appliance. In Scotland and Northern Ireland, alarms must be fitted when installing a new or replacing an old appliance that burns any type of fuel, except for cookers, and additionally in Scotland only, regularly used rooms with a flue exhaust pipe running through.
1
www.aico.co.uk/AudioLINK
Aico Ltd Mile End Business Park Maesbury Road Oswestry Shropshire SY10 8NN
Tel: 01691 664100 Fax: 01691 664111 [email protected] Sales [email protected] Technical [email protected]
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
Extracting the Data
The Alarm Status Report
Saving The Alarm Status Report
The Alarm Status Report generated will be for the life of the alarm so far. It is colour coded to identify the urgency of any issues.
To store the report generated, the contractor can input further details about the location of the alarm and property with any relevant unique reference numbers or additional comments such as time and date.
Extract the data from the alarm to generate a real time Alarm Status Report in 3 EASY STEPS:
AudioLINK Real time facts… Real time action
Shows the status of the battery life.
Displays the number of days the alarm has been powered. ALARM FAULT POWER
ALARM FAULT POWER CARBON MONOXIDE ALARM
Em ail
ALARM FAULT POWER CARBON MONOXIDE ALARM
CARBON MONOXIDE ALARM
Indicates if the alarm sensor is working.
If CO is detected this panel turns red and displays the peak level of CO sensed. It resets every time the alarm is removed.
Keeps a record of the number of times the alarm has been tested and when.
Identifies the number of times the alarm has been removed from its base, and the last time it occurred.
@
STEP 3
Press the test button on the alarm 3 times
The alarm will emit a number of beeps. The phone/App will pick these up (via the microphone.)
The phone/App will show the Alarm Status Report
If the alarm has been activated, due to CO being detected, this records how many times, the level and the last time it occurred.
The Alarm Status Report can be emailed to a central location to maintain records.
Informs of any background CO being detected and the last time it occurred.
@
can save time for response as the contractors are on-site and able to gain access to real time facts
data can be extracted again and again data is stored for the life of the alarm enabling historic information to be retained alarm Status Report provides evidence required for maintenance of records
v , es ui giv mo da in re nc g t e he
STEP 2
extraction can be done on-site, with alarm in situ
can save unnecessary expensive HSE checks if CO is reported – use to detect false claims
Shows the number of times a low battery has been detected and the last time it occurred.
STEP 1
data can be extracted by any contractor with access to an Android smartphone/tablet and App
The Alarm Status Report The contractor can use this information to tell if there are any immediate issues with the alarm, for example if the alarm is coming to the end of its life, and deal with them directly.
gi n nt e re ve g sc e r he the rthe t ing on u Tapp tion tor f informaontrac c
AND... If that wasn’t enough all Aico CO alarms now come with a 10 Year Life proving the best value protection.
LIFE
TM
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
About Aico
Compatible Alarms
• Aico specialises in residential Fire & CO protection – it’s all we do.
Alarms currently available with AudioLINK technology: Battery Powered CO Alarms
Mains Powered CO Alarms
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • We have more mains powered alarms fitted in homes across the UK than any other supplier.
230V AC +
10 YEAR SEALED LITHIUM BATTERY
BS EN 50291-1:2010
BS EN 50291-2:2010
Standalone Battery CO Alarm
Ask for
MAINS POWERED, 10 YEAR RECHARGEABLE LITHIUM BACK-UP
RadioLINK CO Alarm TM
Ei208 Battery CO Alarm (RadioLINK upgradeable)
Ask for
Battery CO Alarm (RadioLINK upgradeable with Digital Display)
Ask for
RadioLINK CO Alarm TM
BS EN 50291-1:2010
• Aico, saving lives.
Ei208W
TM
Ei261ENRC
as part of the property checks prior to change of tenants
100 million alarms have been manufactured in Ireland since the company began 50 years ago.
as part of the annual Gas Safety Checks (CP12)
to generate real time information if CO leaks are detected or the safety of fuel burning appliances has been reported
www.aico.co.uk/AudioLINK
Acknowledgements © Aico Ltd. Illustrations, photographs, part numbers, layout and style are considered property. Any reproduction, in whole or in part, is strictly prohibited without written permission.
Ask for
Ei208DWRF
Collecting data with AudioLINK is simple. The equipment needed is:
CO alarms are traditionally a device to detect and alert the occupant of a dwelling to the presence of Carbon Monoxide gas, but Aico's AudioLINK CO alarms can be used for more.
Ask for
Ei208DW
Ask for
The Equipment
Ask for
Our policy is one of continuous improvement; we reserve the right to amend designs and specifications without prior notice. Every care has been taken to ensure that the content is of this document are correct at the time of printing and we shall be under no liability whatsoever for any errors or omissions.
Ei208WRF RadioLINK CO Alarm (with Digital Display)
Real time facts… Real time action
Ei Electronics is the acknowledged market leader in residential fire safety products and is one of Ireland’s largest indigenous electronics companies, employing more than 800 people.
Ei262 Hard-wired CO Alarm
AudioLINK
• Every alarm is tested at multiple points during the manufacturing process.
Aico is a wholly owned subsidiary of Ei Electronics
RECHARGEABLE
AudioLINK
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard.
TM
All AudioLINK alarms will carry this symbol
AudioLINK is protected by Patent Application No. 11394025.8
to keep a physical record of CO levels
How can you do this? Well, here at Aico we’ve come up with a tool called AudioLINK.
AudioLINK Enabled Alarm
Smartphone or Tablet
With AudioLINK you can extract useful real time data from an alarm using its sounder directly to a smartphone or tablet via an App.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Call us: 01691 664100
www.aico.co.uk/AudioLINK
Call us: 01691 664100
The free AudioLINK App
TM
Need to contact us? About Aico
Regional Specification Managers
• Aico is a wholly owned subsidiary of Ei Electronics, the market leader in residential fire safety products. • Every alarm is tested at multiple points during the manufacturing process.
Compliance and Responsibilities We know that you take your Duty of Care seriously and are always looking for ways in which to improve the level of protection your tenant receives whilst being more time, budget and resource efficient.
Also from the 1st October 2015, Private Landlords in England will be required to fit CO alarms in all rooms with solid fuel heating systems installed.
• All our alarms carry the Kitemark – this shows the alarm has been tested to the relevant British Standard. Aberdeen
Edinburgh Glasgow
2
Newcastle
3
13
Middlesbrough
Belfast
York Leeds
Hull
4
Aico have Regional Specification Managers situated throughout the UK that can help in a consultative role to advise on alarm selection, siting, installation and maintenance. To find the nearest one to you please use this map.
Liverpool
5
Manchester Nottingham Derby
Birmingham
Norwich
Coventry
15
6 www.aico.co.uk/Ei160e
Aberystwyth
7
Cardiff
Swindon
9
South West Caroline Powell Tel: 07771 961 253 [email protected]
9 Home Counties North Briony Martin Tel: 07771 925 694 [email protected]
2 North Barry Mather Tel: 07799 901 740 [email protected]
10
South London Sales Office Tel: 01691 664100 [email protected]
. Wales & N. West 5 N Steve Trafford Tel: 07771 961 254 [email protected]
12 N orth London Tina Mistry Tel: 07771 961 255 [email protected]
est Midlands 6 W Kate Blake Tel: 07771 925 695 [email protected]
orthern Ireland 13 N Duncan Orr Tel: 07876 548 019 [email protected]
ast Midlands 6 E Will van Amersfoort Tel: 07496 863 575 [email protected]
outh East 14 S Sales Office Tel: 01691 664100 [email protected]
ales & Borders 7 W Dan Thomas Tel: 07495 896 235 [email protected]
ast 15 E Gary Mason Tel: 07741 312 391 [email protected]
12 London
11
14
Southampton Bournemouth
Plymouth
www.aico.co.uk/AudioLINK
8
2 West Scotland Colleen Grant Tel: 07771 925 699 [email protected]
10
Bristol
8
orth Scotland N Colin Middleton Tel: 07771 925 698 [email protected]
orks. / N.E. Midlands 4 Y 11 South Paul Cartwright Andrew Sturgess Tel: 07771 816 819 Tel: 07799 901 739 [email protected] [email protected]
1
Part of this Duty of Care is to fit and maintain Carbon Monoxide (CO) alarms. This extends to regular testing of the alarms to ensure they are operational and providing the protection they are designed to give. Building Regulations require CO alarms to be fitted to the British Standard (BS EN 50292:2013), but there are some differences in requirements across the UK. In England and Wales, CO alarms must be fitted when installing a new or replacing an old solid fuel burning appliance. In Scotland and Northern Ireland, alarms must be fitted when installing a new or replacing an old appliance that burns any type of fuel, except for cookers, and additionally in Scotland only, regularly used rooms with a flue exhaust pipe running through.
1
www.aico.co.uk/AudioLINK
Aico Ltd Mile End Business Park Maesbury Road Oswestry Shropshire SY10 8NN
Tel: 01691 664100 Fax: 01691 664111 [email protected] Sales [email protected] Technical [email protected]
AudioLINK
TM
Remove the guesswork.
Aico Ltd
Mile End Business Park Maesbury Road, Oswestry, Shropshire SY10 8NN
Call us:
01691 664100 Fax: 01691 664111 email: [email protected] October 2016
AudioLINK™, making it easier to get real time data from your alarm.
Gas Industry Innovation
Saves time, money and lives
Aico Ltd is a wholly owned subsidiary of Ei Electronics
Europe’s Leader in Residential Fire + Gas Detection Ei Electronics. Shannon. Ireland
www.aico.co.uk/AudioLINK
Made in Ireland
Real time facts… Real time action www.aico.co.uk/AudioLINK
