Repairing Quasar Microwave Fan AWS
Repairing Quasar Microwave Fan
Repairing Quasar Microwave Fan This guide will describe various ways to fix the microwaves fan if it is no longer spinning.
Written By: Melanie
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Repairing Quasar Microwave Fan
TOOLS: Phillips #1 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Repairing Quasar Microwave Fan
Step 1 — Outer Cover
Disconnect the power supply cord from the outlet.
Step 2
Remove the eight screws holding the wood-patterned cover to the microwave frame.
The first four screws are located on either side of the microwave front.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Repairing Quasar Microwave Fan
Step 3
Remove the additional four screws securing the wood-paneled case to the microwave frame.
Step 4
Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.
Lift the case upward slowly until the case is free of the microwave.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Repairing Quasar Microwave Fan
Step 5 — Repairing Quasar Microwave Fan
Locate the fan in the newly exposed interior.
Try spinning the fan with your finger. If it spins freely, the fan is not jammed.
If the fan does not spin freely, locate what is jamming the fan and remove it.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.
In order to work properly, there should be two wires going in and out of the fan. If you are missing either of these wires, locate the loose wire/s and connect them.
Page 5 of 6
Repairing Quasar Microwave Fan
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-01-22 08:08:17 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Repairing Quasar Microwave Fan This guide will describe various ways to fix the microwaves fan if it is no longer spinning.
Written By: Melanie
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Repairing Quasar Microwave Fan
TOOLS: Phillips #1 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Repairing Quasar Microwave Fan
Step 1 — Outer Cover
Disconnect the power supply cord from the outlet.
Step 2
Remove the eight screws holding the wood-patterned cover to the microwave frame.
The first four screws are located on either side of the microwave front.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Repairing Quasar Microwave Fan
Step 3
Remove the additional four screws securing the wood-paneled case to the microwave frame.
Step 4
Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.
Lift the case upward slowly until the case is free of the microwave.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Repairing Quasar Microwave Fan
Step 5 — Repairing Quasar Microwave Fan
Locate the fan in the newly exposed interior.
Try spinning the fan with your finger. If it spins freely, the fan is not jammed.
If the fan does not spin freely, locate what is jamming the fan and remove it.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.
In order to work properly, there should be two wires going in and out of the fan. If you are missing either of these wires, locate the loose wire/s and connect them.
Page 5 of 6
Repairing Quasar Microwave Fan
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-01-22 08:08:17 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
