RFI #471
RFI #471 MACK URBAN 1150 S. Olive, Suite 2250 Los Angeles, California 90015
Project: Cyrene 50 University Street Seattle, Washington 98101
Residential Unit Cabinetry Tab Pull Finish Confirmation TO:
Michael Willis (Ankrom Moisan Architects, Inc.) 117 South Main Street, #400 Seattle, Washington 98104
FROM:
Steve Hall (Exxel Pacific General Contractors) 323 Telegraph Road Bellingham, Washington 98226
DATE INITIATED:
07/11/ 2016
STATUS:
Open
LOCATION:
DUE DATE:
07/15/2016
COST CODE:
REFERENCE:
COST IMPACT:
TBD
SCHEDULE IMPACT: TBD
DRAWING NUMBER:
SPEC SECTION:
LINKED DRAWINGS: RECEIVED FROM:
Steve Hall (Exxel Pacific General Contractors)
COPIES TO: Martha Barkman (Mack Urban (Seattle)), Andrea Bartlett (Mack Urban (Seattle)), Doug Blackwell (Exxel Pacific General Contractors), Heith Bowell (Exxel Pacific General Contractors), Kate Chamberlin (Mercedes Fernandez Interior Design), Mercedes Fernandez (Mereceds Fernandez Interior Design), Louisa Galassini (Mack Urban (Seattle)), Steve Hall (Exxel Pacific General Contractors), Jesse Keely (Exxel Pacific General Contractors), Patrick Merritt (Mack Urban (Seattle)), Ben Prigmore (Exxel Pacific General Contractors), Phuong Truong (Ankrom Moisan Architects, Inc.), Michael Willis (Ankrom Moisan Architects, Inc.), Nathan Woods (Ankrom Moisan Architects, Inc.)
Question from Steve Hall (Exxel Pacific General Contractors) at 12:34 PM on 07/11/2016 Reference: 1. 50U - Submittal #123530-02 Residential Casework Product Data & Samples - Reviewer to Sub - Approved As Noted - 05.26.16 2. 50U - Submittal #123530-01.2 Residential Casework Shop Drawings - Reviewer to Sub - Approved As Noted - 05.13.16 3. Attached Exxel / MFID correspondence. Please note that previously approved submittals above revised the cabinetry pull selections for both Type A & B Units. Per recent correspondence with the design team, Exxel transmitted to MFID (July 1st 2016) additional "Tab Pull" finishes for Type B units per design team request. See attached. Please clarify if the previously approved standard tab pull finish (DA41A) "Satin Clear Anodized Finish" are to be revised to a "PA or AS" finish. Please note the "PA / AS" finishes are special order and have additional costs of ROM $6K. Attachments: 50U - RFI #471 - Additional Finishes.pdf
All Replies:
Per owner direction: Tab pull samples received from Exxcel. Tab pull located at units. Anodized stainless cabinet pull. See redlines below. Submit sample for approval. MF 7.12.16
BY
MACK URBAN
DATE
Tab pulls are for Type B units. NW
COPIES TO
Page 1 of 1
Printed On: 07/11/2016 12:34 PM
approved tab pull finish. MF
Anodized Stainless Cabinet Pull Sample - DP41 "AS"
Polished Chrome Cabinet Pull Sample - DP41 "PA"
Transmitted to MFID on 7/1/16
<[email protected]>; Jesse Keely <[email protected]>; Chad Taylor Subject: RE: Western tab pull Mercedes There would be an added cost of approximately $5600 for the PA or AS finish. We would have to special order samples of those finishes, and could probably get them in 7-10 days. Please advise as soon as possible if you want samples. We need to order the pulls for this project soon. Regards, Greg McKelvey Sales Representative Cell: 503-519-3456 Email: [email protected]
From: Mercedes Fernandez [mailto:[email protected]] Sent: Monday, June 20, 2016 4:43 PM To: Greg McKelvey; Steven Hall ([email protected]) Cc: Nathan Woods ([email protected]); Michael Willis ([email protected]); Dave Meier; Steve Wilson; Chad Taylor Subject: RE: Western tab pull
Greg Do you have an idea of the increased cost if a PA or AS was selected , before I present it to the owner? And availability of samples? Thanks, Mercedes Hello: Please note our new address!!! Mercedes Fernandez Interior Design 117 S. Main Street Suite 400 Seattle, WA 98104 206-325-5434 mercedesinteriordesign.com
From: Greg McKelvey [mailto:[email protected]] Sent: Monday, June 20, 2016 4:28 PM 3
To: Mercedes Fernandez; Steven Hall ([email protected]) Cc: Nathan Woods ([email protected]); Michael Willis ([email protected]); Dave Meier; Steve Wilson; Chad Taylor Subject: RE: Western tab pull
Mercedes We normally supply the tab pull in a Satin Clear Anodized finish. It is available in the finishes shown below, but there would likely be an added cost – depending upon the finish selected. There may also be extended lead time required for other finishes.
Regards, Greg McKelvey Sales Representative Cell: 503-519-3456 Email: [email protected]
From: Mercedes Fernandez [mailto:[email protected]] Sent: Monday, June 20, 2016 4:17 PM To: Greg McKelvey; Steven Hall ([email protected]) Cc: Nathan Woods ([email protected]); Michael Willis ([email protected]) Subject: FW: Western tab pull
Greg/Steven: Could you see below…what finishes does the tab pull come in and what has been provided as a submittal? Thanks, Mercedes Hello: Please note our new address!!! Mercedes Fernandez Interior Design 117 S. Main Street Suite 400 Seattle, WA 98104 206-325-5434 mercedesinteriordesign.com
4
Project: Cyrene 50 University Street Seattle, Washington 98101
Residential Unit Cabinetry Tab Pull Finish Confirmation TO:
Michael Willis (Ankrom Moisan Architects, Inc.) 117 South Main Street, #400 Seattle, Washington 98104
FROM:
Steve Hall (Exxel Pacific General Contractors) 323 Telegraph Road Bellingham, Washington 98226
DATE INITIATED:
07/11/ 2016
STATUS:
Open
LOCATION:
DUE DATE:
07/15/2016
COST CODE:
REFERENCE:
COST IMPACT:
TBD
SCHEDULE IMPACT: TBD
DRAWING NUMBER:
SPEC SECTION:
LINKED DRAWINGS: RECEIVED FROM:
Steve Hall (Exxel Pacific General Contractors)
COPIES TO: Martha Barkman (Mack Urban (Seattle)), Andrea Bartlett (Mack Urban (Seattle)), Doug Blackwell (Exxel Pacific General Contractors), Heith Bowell (Exxel Pacific General Contractors), Kate Chamberlin (Mercedes Fernandez Interior Design), Mercedes Fernandez (Mereceds Fernandez Interior Design), Louisa Galassini (Mack Urban (Seattle)), Steve Hall (Exxel Pacific General Contractors), Jesse Keely (Exxel Pacific General Contractors), Patrick Merritt (Mack Urban (Seattle)), Ben Prigmore (Exxel Pacific General Contractors), Phuong Truong (Ankrom Moisan Architects, Inc.), Michael Willis (Ankrom Moisan Architects, Inc.), Nathan Woods (Ankrom Moisan Architects, Inc.)
Question from Steve Hall (Exxel Pacific General Contractors) at 12:34 PM on 07/11/2016 Reference: 1. 50U - Submittal #123530-02 Residential Casework Product Data & Samples - Reviewer to Sub - Approved As Noted - 05.26.16 2. 50U - Submittal #123530-01.2 Residential Casework Shop Drawings - Reviewer to Sub - Approved As Noted - 05.13.16 3. Attached Exxel / MFID correspondence. Please note that previously approved submittals above revised the cabinetry pull selections for both Type A & B Units. Per recent correspondence with the design team, Exxel transmitted to MFID (July 1st 2016) additional "Tab Pull" finishes for Type B units per design team request. See attached. Please clarify if the previously approved standard tab pull finish (DA41A) "Satin Clear Anodized Finish" are to be revised to a "PA or AS" finish. Please note the "PA / AS" finishes are special order and have additional costs of ROM $6K. Attachments: 50U - RFI #471 - Additional Finishes.pdf
All Replies:
Per owner direction: Tab pull samples received from Exxcel. Tab pull located at units. Anodized stainless cabinet pull. See redlines below. Submit sample for approval. MF 7.12.16
BY
MACK URBAN
DATE
Tab pulls are for Type B units. NW
COPIES TO
Page 1 of 1
Printed On: 07/11/2016 12:34 PM
approved tab pull finish. MF
Anodized Stainless Cabinet Pull Sample - DP41 "AS"
Polished Chrome Cabinet Pull Sample - DP41 "PA"
Transmitted to MFID on 7/1/16
<[email protected]>; Jesse Keely <[email protected]>; Chad Taylor Subject: RE: Western tab pull Mercedes There would be an added cost of approximately $5600 for the PA or AS finish. We would have to special order samples of those finishes, and could probably get them in 7-10 days. Please advise as soon as possible if you want samples. We need to order the pulls for this project soon. Regards, Greg McKelvey Sales Representative Cell: 503-519-3456 Email: [email protected]
From: Mercedes Fernandez [mailto:[email protected]] Sent: Monday, June 20, 2016 4:43 PM To: Greg McKelvey; Steven Hall ([email protected]) Cc: Nathan Woods ([email protected]); Michael Willis ([email protected]); Dave Meier; Steve Wilson; Chad Taylor Subject: RE: Western tab pull
Greg Do you have an idea of the increased cost if a PA or AS was selected , before I present it to the owner? And availability of samples? Thanks, Mercedes Hello: Please note our new address!!! Mercedes Fernandez Interior Design 117 S. Main Street Suite 400 Seattle, WA 98104 206-325-5434 mercedesinteriordesign.com
From: Greg McKelvey [mailto:[email protected]] Sent: Monday, June 20, 2016 4:28 PM 3
To: Mercedes Fernandez; Steven Hall ([email protected]) Cc: Nathan Woods ([email protected]); Michael Willis ([email protected]); Dave Meier; Steve Wilson; Chad Taylor Subject: RE: Western tab pull
Mercedes We normally supply the tab pull in a Satin Clear Anodized finish. It is available in the finishes shown below, but there would likely be an added cost – depending upon the finish selected. There may also be extended lead time required for other finishes.
Regards, Greg McKelvey Sales Representative Cell: 503-519-3456 Email: [email protected]
From: Mercedes Fernandez [mailto:[email protected]] Sent: Monday, June 20, 2016 4:17 PM To: Greg McKelvey; Steven Hall ([email protected]) Cc: Nathan Woods ([email protected]); Michael Willis ([email protected]) Subject: FW: Western tab pull
Greg/Steven: Could you see below…what finishes does the tab pull come in and what has been provided as a submittal? Thanks, Mercedes Hello: Please note our new address!!! Mercedes Fernandez Interior Design 117 S. Main Street Suite 400 Seattle, WA 98104 206-325-5434 mercedesinteriordesign.com
4
