round tapered steel ds200
3-Bolt Anchor Base
Job Name:
Client Name:
Job Location - City: Product:
State:
DS200 ----
Quote:
Created By:
Date:
Customer Approval:
Date:
Poles - Steel
ROUND TAPERED STEEL DS200
SPECIFICATIONS Plain Top
Pole Top - The pole top is held to a 3.00” OD (±0.13”) for external top mount luminaire and/or bracket. For internal top mount luminaire please consult factory. A removable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. Pole Cap
Handhole - A covered handhole and grounding provision with hardware is provided.
RTS / DS200
Pole - The pole shaft conforms to ASTM A595 Grade A with a constant linear taper of 0.14 in/ft.
Anchor Base - The anchor base (base plate) conforms to ASTM A36. Anchor Bolts - Anchor bolts conform to ASTM F1554 Grade 55 and are provided with one hex nut, one acorn nut and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
Round
Handhole
Hardware - All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel. Finish - Standard finishes are galvanized, prime painted or any of Valmont’s V-PROTM Protection Systems. Additional finish options available upon request. Design Criteria - Please reference Design Criteria Specification for appropriate design conditions.
Acorn Nuts
Handhole 1’-6”
VALMON T I N D U S T R I E S , I N C .
2 8 8 0 0 I D A S T R E E T, P O B O X 358 - VALLEY, NE 68064 USA
800.825.6668
VALMONTSTRUCTURES.COM
3-Bolt Anchor Base
Nominal Mounting Height
Cross Section
Poles - Steel
ROUND TAPERED STEEL DS200 3-Bolt Anchor Base Job Name:
Client Name:
Job Location - City:
State:
DS200 ---Product:
Quote:
Created By:
Date:
Customer Approval:
Date:
ANCHORAGE DATA RTS / DS200
BASE PLATE POLE BOLT CIRCLE BASE + DIA OD WIDTH (IN) (IN) (IN) (IN)
4.40 4.68 4.96 5.24 5.52 5.80
8.00 8.00 8.00 8.00 8.00 8.00
N/A N/A N/A N/A N/A N/A
8.50 8.50 8.50 8.50 8.50 8.50
Anchor Base Detail
ANCHOR BOLTS THK (IN)
0.750 0.750 0.750 0.750 0.750 0.750
180°
DIA x LENGTH x HOOK PROJECTION + (IN) (IN) (IN)
0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00
3.50 3.50 3.50 3.50 3.50 3.50
0.25 0.25 0.25 0.25 0.25 0.25
Bolt Holes Bolt Circle
As viewed from top of pole.
90°
270°
0° - Handhole
LOAD AND DIMENSIONAL DATA
10'-0" 12'-0" 14'-0" 16'-0" 18'-0" 20'-0"
11.6 11.8 11.4 10.0 8.9 7.5
125 125 125 125 125 125
8.9 9.0 8.7 7.6 6.7 5.5
125 125 125 125 125 125
7.0 7.1 6.8 5.9 5.2 4.2
125 125 125 125 125 125
POLE DIMENSIONS TOP OD (IN)
4.40 4.68 4.96 5.24 5.52 5.80
3.00 3.00 3.00 3.00 3.00 3.00
WALL STRUCTURE THK WEIGHT2 (LBS) (GA)
11 11 11 11 11 11
60 70 80 95 110 125
MODEL NUMBER
R440A100 R468A120 R496A140 R524A160 R552A180 R580A200
1. Maximum weight and EPA values are based on top mounted luminaires and/or brackets having a centroid 2’-0’’ above the nominal mounting height. 2. Structure weight is a nominal value which includes the pole shaft and base plate only.
PRODUCT ORDERING CODES DESIGN SERIES
MODEL NUMBER
FIXTURE MOUNTING
FINISH
DS200 R440A100 R468A120 R496A140 R524A160 R552A180 R580A200
Drill Mounting
D1 = 1 Luminaire D2 = 2 @ 180° D3 = 3 @ 120° D4 = 4 @ 90° D5 = 2 @ 90° D6 = 3 @ 90°
GV = Galvanize P = Prime Paint P FP = Finish Paint GF = Galvanized + Finish Paint
COLOR
V-PROTM PROTECTION SYSTEM
--
--
-- = Galvanize -- = Prime Paint WH = White ST = Sandstone BK = Black SM = Silver Metallic SL = Silver LG = Light Gray SG = Slate Gray DT = Dark Tan MB = Medium Bronze CB = Bronze DB = Dark Bronze BN = Brown HG = Hunter Green DG = Dark Green RD = Red SC = Special Color
-- = Galvanize -- = Prime Paint V1 = V-PRO 1
Basic 1 Coat Powder.
OPTIONS
See Accessories at valmontstructures.com (Please Specify)
V2 = V-PRO 2
2 Coat Powder or Liquid. Includes epoxy primer & top coat.
V3 = V-PRO 3
2 Coat Powder or Liquid. Includes zinc primer & top coat.
V4 = V-PRO 4
2 Coat Powder or Liquid. Includes zinc primer & premium top coat.
(Contact Factory)
VALMON T I N D U S T R I E S , I N C .
2 8 8 0 0 I D A S T R E E T, P O B O X 358 - VALLEY, NE 68064 USA
800.825.6668
VALMONTSTRUCTURES.COM
SPC7208 02/12 valmontstructures.com carries the most current spec information and supersedes these guidelines.
3-Bolt Anchor Base
DESIGN INFORMATION 80 MPH 90 MPH 100 MPH w/1.3 GUST w/1.3 GUST w/1.3 GUST NOMINAL MAX MAX MAX MAX MAX MAX BASE MOUNTING EPA1 WEIGHT1 EPA1 WEIGHT1 EPA1 WEIGHT1 OD (LBS) (SQ FT) (LBS) (SQ FT) (LBS) HEIGHT (SQ FT) (IN)
Job Name:
Client Name:
Job Location - City: Product:
State:
DS200 ----
Quote:
Created By:
Date:
Customer Approval:
Date:
Poles - Steel
ROUND TAPERED STEEL DS200
SPECIFICATIONS Plain Top
Pole Top - The pole top is held to a 3.00” OD (±0.13”) for external top mount luminaire and/or bracket. For internal top mount luminaire please consult factory. A removable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. Pole Cap
Handhole - A covered handhole and grounding provision with hardware is provided.
RTS / DS200
Pole - The pole shaft conforms to ASTM A595 Grade A with a constant linear taper of 0.14 in/ft.
Anchor Base - The anchor base (base plate) conforms to ASTM A36. Anchor Bolts - Anchor bolts conform to ASTM F1554 Grade 55 and are provided with one hex nut, one acorn nut and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
Round
Handhole
Hardware - All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel. Finish - Standard finishes are galvanized, prime painted or any of Valmont’s V-PROTM Protection Systems. Additional finish options available upon request. Design Criteria - Please reference Design Criteria Specification for appropriate design conditions.
Acorn Nuts
Handhole 1’-6”
VALMON T I N D U S T R I E S , I N C .
2 8 8 0 0 I D A S T R E E T, P O B O X 358 - VALLEY, NE 68064 USA
800.825.6668
VALMONTSTRUCTURES.COM
3-Bolt Anchor Base
Nominal Mounting Height
Cross Section
Poles - Steel
ROUND TAPERED STEEL DS200 3-Bolt Anchor Base Job Name:
Client Name:
Job Location - City:
State:
DS200 ---Product:
Quote:
Created By:
Date:
Customer Approval:
Date:
ANCHORAGE DATA RTS / DS200
BASE PLATE POLE BOLT CIRCLE BASE + DIA OD WIDTH (IN) (IN) (IN) (IN)
4.40 4.68 4.96 5.24 5.52 5.80
8.00 8.00 8.00 8.00 8.00 8.00
N/A N/A N/A N/A N/A N/A
8.50 8.50 8.50 8.50 8.50 8.50
Anchor Base Detail
ANCHOR BOLTS THK (IN)
0.750 0.750 0.750 0.750 0.750 0.750
180°
DIA x LENGTH x HOOK PROJECTION + (IN) (IN) (IN)
0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00 0.75 x 17.00 x 3.00
3.50 3.50 3.50 3.50 3.50 3.50
0.25 0.25 0.25 0.25 0.25 0.25
Bolt Holes Bolt Circle
As viewed from top of pole.
90°
270°
0° - Handhole
LOAD AND DIMENSIONAL DATA
10'-0" 12'-0" 14'-0" 16'-0" 18'-0" 20'-0"
11.6 11.8 11.4 10.0 8.9 7.5
125 125 125 125 125 125
8.9 9.0 8.7 7.6 6.7 5.5
125 125 125 125 125 125
7.0 7.1 6.8 5.9 5.2 4.2
125 125 125 125 125 125
POLE DIMENSIONS TOP OD (IN)
4.40 4.68 4.96 5.24 5.52 5.80
3.00 3.00 3.00 3.00 3.00 3.00
WALL STRUCTURE THK WEIGHT2 (LBS) (GA)
11 11 11 11 11 11
60 70 80 95 110 125
MODEL NUMBER
R440A100 R468A120 R496A140 R524A160 R552A180 R580A200
1. Maximum weight and EPA values are based on top mounted luminaires and/or brackets having a centroid 2’-0’’ above the nominal mounting height. 2. Structure weight is a nominal value which includes the pole shaft and base plate only.
PRODUCT ORDERING CODES DESIGN SERIES
MODEL NUMBER
FIXTURE MOUNTING
FINISH
DS200 R440A100 R468A120 R496A140 R524A160 R552A180 R580A200
Drill Mounting
D1 = 1 Luminaire D2 = 2 @ 180° D3 = 3 @ 120° D4 = 4 @ 90° D5 = 2 @ 90° D6 = 3 @ 90°
GV = Galvanize P = Prime Paint P FP = Finish Paint GF = Galvanized + Finish Paint
COLOR
V-PROTM PROTECTION SYSTEM
--
--
-- = Galvanize -- = Prime Paint WH = White ST = Sandstone BK = Black SM = Silver Metallic SL = Silver LG = Light Gray SG = Slate Gray DT = Dark Tan MB = Medium Bronze CB = Bronze DB = Dark Bronze BN = Brown HG = Hunter Green DG = Dark Green RD = Red SC = Special Color
-- = Galvanize -- = Prime Paint V1 = V-PRO 1
Basic 1 Coat Powder.
OPTIONS
See Accessories at valmontstructures.com (Please Specify)
V2 = V-PRO 2
2 Coat Powder or Liquid. Includes epoxy primer & top coat.
V3 = V-PRO 3
2 Coat Powder or Liquid. Includes zinc primer & top coat.
V4 = V-PRO 4
2 Coat Powder or Liquid. Includes zinc primer & premium top coat.
(Contact Factory)
VALMON T I N D U S T R I E S , I N C .
2 8 8 0 0 I D A S T R E E T, P O B O X 358 - VALLEY, NE 68064 USA
800.825.6668
VALMONTSTRUCTURES.COM
SPC7208 02/12 valmontstructures.com carries the most current spec information and supersedes these guidelines.
3-Bolt Anchor Base
DESIGN INFORMATION 80 MPH 90 MPH 100 MPH w/1.3 GUST w/1.3 GUST w/1.3 GUST NOMINAL MAX MAX MAX MAX MAX MAX BASE MOUNTING EPA1 WEIGHT1 EPA1 WEIGHT1 EPA1 WEIGHT1 OD (LBS) (SQ FT) (LBS) (SQ FT) (LBS) HEIGHT (SQ FT) (IN)
