Samsung DV300F Back LCD Screen Replacement
Samsung DV300F Back LCD Screen Replacement
Samsung DV300F Back LCD Screen Replacement This guide will serve as a replacement guide for the Back LCD.
Written By: Timothy Gordon
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Samsung DV300F Back LCD Screen Replacement
INTRODUCTION This guide will show how to remove the Back LCD Screen.
TOOLS: Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Samsung DV300F Back LCD Screen Replacement
Step 1 — Front and Rear Casing
First remove the two black 4.2mm screws on the right side of the camera by using a Phillips #0 screwdriver.
Next remove the two black 4.2mm screws on the left side of the camera by using a Phillips #0 screwdriver.
Finally remove the black 4.2mm screws on the bottom of the camera by using a Phillips #0 screwdriver.
Step 2
Take off the back case of the camera.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Samsung DV300F Back LCD Screen Replacement
Step 3
Take off the front case of the camera gently
Take off the front LCD gently, so the front casing is completely free
Step 4 — Back LCD Screen
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the Back LCD screen from its nest.
Page 4 of 5
Samsung DV300F Back LCD Screen Replacement
Step 5
Flip the black tab where the Back LCD screen connects to the circuit board
Pull the tape connection to disconnect the Back LCD screen from the circuit board
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-02-21 11:28:54 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Samsung DV300F Back LCD Screen Replacement This guide will serve as a replacement guide for the Back LCD.
Written By: Timothy Gordon
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Samsung DV300F Back LCD Screen Replacement
INTRODUCTION This guide will show how to remove the Back LCD Screen.
TOOLS: Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Samsung DV300F Back LCD Screen Replacement
Step 1 — Front and Rear Casing
First remove the two black 4.2mm screws on the right side of the camera by using a Phillips #0 screwdriver.
Next remove the two black 4.2mm screws on the left side of the camera by using a Phillips #0 screwdriver.
Finally remove the black 4.2mm screws on the bottom of the camera by using a Phillips #0 screwdriver.
Step 2
Take off the back case of the camera.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Samsung DV300F Back LCD Screen Replacement
Step 3
Take off the front case of the camera gently
Take off the front LCD gently, so the front casing is completely free
Step 4 — Back LCD Screen
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the Back LCD screen from its nest.
Page 4 of 5
Samsung DV300F Back LCD Screen Replacement
Step 5
Flip the black tab where the Back LCD screen connects to the circuit board
Pull the tape connection to disconnect the Back LCD screen from the circuit board
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-02-21 11:28:54 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
