Samsung Galaxy Grand Prime Battery Replacement
Samsung Galaxy Grand Prime Battery Replacement
Samsung Galaxy Grand Prime Battery Replacement If your device has a drained/dead or damaged battery we can help you to replace it and bring power back to your galaxy.
Written By: Damien Harris
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Samsung Galaxy Grand Prime Battery Replacement
INTRODUCTION This repair is needed to replace the dead battery in your device if it does not turn on, hold a charge, or just flat out wont charge at all.
TOOLS: iFixit Opening Tools (1) Q-Tips (1) Iso 90% Rubbing alcohol (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Samsung Galaxy Grand Prime Battery Replacement
Step 1 — Battery
Remove the back cover of phone by lifting up on the back cover tab with the blue plastic opening tool.
Go around the edge of the back cover to completely remove it.
Step 2 — Remove the battery.
Remove the old battery by lifting up on the thumb tab.
Periodically clean the brass terminals on the battery and the phone. Place a minute amount of ISO on a Q-tip and gingerly clean the connections.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 11:28:33 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Samsung Galaxy Grand Prime Battery Replacement If your device has a drained/dead or damaged battery we can help you to replace it and bring power back to your galaxy.
Written By: Damien Harris
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Samsung Galaxy Grand Prime Battery Replacement
INTRODUCTION This repair is needed to replace the dead battery in your device if it does not turn on, hold a charge, or just flat out wont charge at all.
TOOLS: iFixit Opening Tools (1) Q-Tips (1) Iso 90% Rubbing alcohol (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Samsung Galaxy Grand Prime Battery Replacement
Step 1 — Battery
Remove the back cover of phone by lifting up on the back cover tab with the blue plastic opening tool.
Go around the edge of the back cover to completely remove it.
Step 2 — Remove the battery.
Remove the old battery by lifting up on the thumb tab.
Periodically clean the brass terminals on the battery and the phone. Place a minute amount of ISO on a Q-tip and gingerly clean the connections.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 11:28:33 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
