Samsung Galaxy S2 I9100 Screen Replacement

Samsung Galaxy S2 I9100 Screen Replacement

Samsung Galaxy S2 I9100 Screen Replacement Written By: AndreaBaglione

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Samsung Galaxy S2 I9100 Screen Replacement

INTRODUCTION Galaxy SII Screen Replacement Tutorial

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

Samsung Galaxy S2 I9100 Screen Replacement

Step 1 — Screen 

Galaxy SII Screen Replacement Tutorial



Remove battery door and battery

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

Samsung Galaxy S2 I9100 Screen Replacement

Step 3 

Remove all screws on the back of the plastic frame



Use a plastic tool to separate the rear frame from the front

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 6

Samsung Galaxy S2 I9100 Screen Replacement

Step 5



Now disconnect all connectors on the motherboard, making sure the front camera and buzzer. This is attached with the double-sided adhesive. As a precaution, remove the audio ear speaker. In all this we will always help with a plastic instrument and a spudger.



Remove with a thin tool "iSesamo" the volume rocker and power switch side, these are fixed with adhesive tape

Step 6



Now we can remove the logic board

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 6

Samsung Galaxy S2 I9100 Screen Replacement

Step 7



Remove the USB connector by unscrewing the two screws. Reinstall the new display starting from this step to number one on the procedure.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 03:57:39 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6