Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement Replace or remove the rear panel on the Samsung Galaxy Tab Pro 10.1.
撰写者: Stephen Yeung
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 3 页
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement
介绍 This guide will show how to replace or remove the rear panel on the Samsung Galaxy Tab Pro 10.1. The rear panel can be removed to either access the interior of the device or removed for replacement. The guide will outline how to remove the rear panel from the front panel enclosure.
工具:
章节:
Metal Spudger Set (1)
Galaxy Tab Pro 10.1 (Wi-Fi) Rear Panel (1)
iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 3 页
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement
步骤 1 — Rear Panel
Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied.
Insert a plastic opening tool into the crevice between the screen and the side of the tablet.
Go around the entire crevice with the plastic opening tool.
Set aside the separated front and rear panels of the device.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-10-08 07:30:45 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 3 页
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement Replace or remove the rear panel on the Samsung Galaxy Tab Pro 10.1.
撰写者: Stephen Yeung
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 3 页
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement
介绍 This guide will show how to replace or remove the rear panel on the Samsung Galaxy Tab Pro 10.1. The rear panel can be removed to either access the interior of the device or removed for replacement. The guide will outline how to remove the rear panel from the front panel enclosure.
工具:
章节:
Metal Spudger Set (1)
Galaxy Tab Pro 10.1 (Wi-Fi) Rear Panel (1)
iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 3 页
Samsung Galaxy Tab Pro 10.1 Rear Panel Replacement
步骤 1 — Rear Panel
Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied.
Insert a plastic opening tool into the crevice between the screen and the side of the tablet.
Go around the entire crevice with the plastic opening tool.
Set aside the separated front and rear panels of the device.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-10-08 07:30:45 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 3 页
