Samsung Gusto 2 Speaker Replacement
Samsung Gusto 2 Speaker Replacement
Samsung Gusto 2 Speaker Replacement Speaker replacement and the connections for the speaker.
Written By: Michael Huang
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Samsung Gusto 2 Speaker Replacement
TOOLS: Spudger (1) Tweezers (1) Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Samsung Gusto 2 Speaker Replacement
Step 1 — Speaker
Flip open the phone as shown in picture 1.
Take your screwdriver and start to unscrew the screws highlighted in picture 1.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Take your spudger and forcefully insert it between the black and silver part of the phone.
Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.
Page 3 of 4
Samsung Gusto 2 Speaker Replacement
Step 3
The phone should be exposed like picture 1 once the case was removed.
The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off.
Speaker Component
Vibration Component
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-30 05:43:13 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Samsung Gusto 2 Speaker Replacement Speaker replacement and the connections for the speaker.
Written By: Michael Huang
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Samsung Gusto 2 Speaker Replacement
TOOLS: Spudger (1) Tweezers (1) Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Samsung Gusto 2 Speaker Replacement
Step 1 — Speaker
Flip open the phone as shown in picture 1.
Take your screwdriver and start to unscrew the screws highlighted in picture 1.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Take your spudger and forcefully insert it between the black and silver part of the phone.
Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.
Page 3 of 4
Samsung Gusto 2 Speaker Replacement
Step 3
The phone should be exposed like picture 1 once the case was removed.
The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off.
Speaker Component
Vibration Component
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-30 05:43:13 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
