Samsung SGH-X495 Speakers Replacement
Samsung SGH-X495 Speakers Replacement
Samsung SGH-X495 Speakers Replacement How to replace the speakers on the Samsung SGH-X495.
Written By: Matthew Hove
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 8
Samsung SGH-X495 Speakers Replacement
TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1) Solder (1) Soldering Station (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 8
Samsung SGH-X495 Speakers Replacement
Step 1 — Face Plate
First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.
Remove the 2 (5.6 mm) philips head screws with your safety or push pin.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 8
Samsung SGH-X495 Speakers Replacement
Step 3
As shown above, with a plastic pry tool, begin working at the top corner and down each side. The face plate has 10 tabs that hook into the phone's body.
Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.
Note: The bottom 2 are the most challenging to remove.
Note: When reassembling start with the bottom two tabs.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 8
Samsung SGH-X495 Speakers Replacement
Step 4
Continue down each side toward the bottom with your pry tool.
Note: It may help to use multiple pry tools to help hold it open.
Second photo: location of the tabs.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 8
Samsung SGH-X495 Speakers Replacement
Step 5
With 8 tabs released, the face plate is nearly free.
With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.
Note: A strip of double sided tape holds the faceplate, so expect some resistance
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 8
Samsung SGH-X495 Speakers Replacement
Step 6 — Speakers
Remove the 2 speakers by gently prying them up.
The speakers are attached with double sided tape.
Step 7
With the speakers free from the phones body the screen is loose as well.
The desired solder joint can be accessed to attach a new speaker.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 8
Samsung SGH-X495 Speakers Replacement This document was last generated on 2017-06-24 01:04:25 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 8
Samsung SGH-X495 Speakers Replacement How to replace the speakers on the Samsung SGH-X495.
Written By: Matthew Hove
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 8
Samsung SGH-X495 Speakers Replacement
TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1) Solder (1) Soldering Station (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 8
Samsung SGH-X495 Speakers Replacement
Step 1 — Face Plate
First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.
Remove the 2 (5.6 mm) philips head screws with your safety or push pin.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 8
Samsung SGH-X495 Speakers Replacement
Step 3
As shown above, with a plastic pry tool, begin working at the top corner and down each side. The face plate has 10 tabs that hook into the phone's body.
Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.
Note: The bottom 2 are the most challenging to remove.
Note: When reassembling start with the bottom two tabs.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 8
Samsung SGH-X495 Speakers Replacement
Step 4
Continue down each side toward the bottom with your pry tool.
Note: It may help to use multiple pry tools to help hold it open.
Second photo: location of the tabs.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 8
Samsung SGH-X495 Speakers Replacement
Step 5
With 8 tabs released, the face plate is nearly free.
With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.
Note: A strip of double sided tape holds the faceplate, so expect some resistance
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 8
Samsung SGH-X495 Speakers Replacement
Step 6 — Speakers
Remove the 2 speakers by gently prying them up.
The speakers are attached with double sided tape.
Step 7
With the speakers free from the phones body the screen is loose as well.
The desired solder joint can be accessed to attach a new speaker.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 8
Samsung SGH-X495 Speakers Replacement This document was last generated on 2017-06-24 01:04:25 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 8
